- 06 Sep, 2021 1 commit
-
-
Christoph Hellwig authored
Add the missing description for the nents parameter, and fix a trivial misalignment. Fixes: fffe3cc8 ("dma-mapping: allow map_sg() ops to return negative error codes") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- 19 Aug, 2021 2 commits
-
-
Christoph Hellwig authored
Switch hexagon to use the generic code for dma_alloc_coherent from a global pre-filled pool. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Cain <bcain@codeaurora.org>
-
Christoph Hellwig authored
Only build the code to support the global coherent pool if support for it is enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Dillon Min <dillon.minfei@gmail.com>
-
- 18 Aug, 2021 5 commits
-
-
Christoph Hellwig authored
Add a new helper to initialize the global coherent pool. This both cleans up the existing initialization which indirects through the reserved_mem_ops that are normally only used for struct device, and also allows using the global pool for non-devicetree architectures. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Dillon Min <dillon.minfei@gmail.com>
-
Christoph Hellwig authored
Return the allocated dma_coherent_mem structure, set the use_dma_pfn_offset and print the failure warning inside of dma_init_coherent_memory instead of leaving that to the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Dillon Min <dillon.minfei@gmail.com>
-
Christoph Hellwig authored
Switch an ifdef so that the global coherent pool is initialized for any architecture that selects the DMA_GLOBAL_POOL symbol insted of hardcoding ARM. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Dillon Min <dillon.minfei@gmail.com>
-
Christoph Hellwig authored
Select the right options to just use the generic dma-direct code instead of reimplementing it. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Dillon Min <dillon.minfei@gmail.com>
-
Christoph Hellwig authored
Add an option to allocate uncached memory for dma_alloc_coherent from the global dma_coherent_default_memory. This will allow to move arm-nommu (and eventually other platforms) to use generic code for allocating uncached memory from a pre-populated pool. Note that this is a different pool from the one that platforms that can remap at runtime use for GFP_ATOMIC allocations for now, although there might be opportunities to eventually end up with a common codebase for the two use cases. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Dillon Min <dillon.minfei@gmail.com>
-
- 14 Aug, 2021 1 commit
-
-
Christoph Hellwig authored
These can only return 0 for failure or the number of entries, so turn the return value into an unsigned int. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
-
- 09 Aug, 2021 23 commits
-
-
Logan Gunthorpe authored
Now that all the .map_sg operations have been converted to returning proper error codes, drop the code to handle a zero return value, add a warning if a zero is returned. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. The only errno to return is -EINVAL in the case when DMA is not supported. Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Setting the ->dma_address to DMA_MAPPING_ERROR is not part of the ->map_sg calling convention, so remove it. Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. So make __dma_map_cont() return a valid errno (which is then propagated to gart_map_sg() via dma_map_cont()) and return it in case of failure. Also, return -EINVAL in case of invalid nents. Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. xen_swiotlb_map_sg() may only fail if xen_swiotlb_map_page() fails, but xen_swiotlb_map_page() only supports returning errors as DMA_MAPPING_ERROR. So coalesce all errors into EIO per the documentation for dma_map_sgtable(). Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. Return -EINVAL if the ioc cannot be obtained. Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Setting the ->dma_address to DMA_MAPPING_ERROR is not part of the ->map_sg calling convention, so remove it. Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. Returning an errno from __sbus_iommu_map_sg() results in sbus_iommu_map_sg_gflush() and sbus_iommu_map_sg_pflush() returning an errno, as those functions are wrappers around __sbus_iommu_map_sg(). Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Setting the ->dma_address to DMA_MAPPING_ERROR is not part of the ->map_sg calling convention, so remove it. Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. So propagate the error from __s390_dma_map_sg() up. __s390_dma_map_sg() returns either -ENOMEM on allocation failure or -EINVAL which is the same as what's expected by dma_map_sgtable(). Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Setting the ->dma_address to DMA_MAPPING_ERROR is not part of the ->map_sg calling convention, so remove it. Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Geoff Levand <geoff@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. Propagate the error up if vio_dma_iommu_map_sg() fails. ppc_iommu_map_sg() may fail either because of iommu_range_alloc() or because of tbl->it_ops->set(). The former only supports returning an error with DMA_MAPPING_ERROR and an examination of the latter indicates that it may return arch-specific errors (for example, tce_buildmulti_pSeriesLP()). Hence, coalesce all of those errors into -EIO, per the documentation on dma_map_sgtable(). Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Geoff Levand <geoff@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. vdma_alloc() may fail for different reasons, but since it only supports indicating an error via a return of DMA_MAPPING_ERROR, we coalesce the different reasons into -EIO as is documented on dma_map_sgtable(). Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. In the case of a dma_mapping_error() return -EIO as the actual cause is opaque here. sba_coalesce_chunks() may only presently fail if sba_alloc_range() fails, which in turn only fails if the iommu is out of mapping resources, hence a -ENOMEM is used in that case. Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Setting the ->dma_address to DMA_MAPPING_ERROR is not part of the ->map_sg calling convention, so remove it. Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. In the case of a DMA_MAPPING_ERROR, -EIO is returned. Otherwise, -ENOMEM or -EINVAL is returned depending on the error from __map_sg_chunk(). Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin Oliveira authored
The .map_sg() op now expects an error code instead of zero on failure. pci_map_single_1() can fail for different reasons, but since the only supported type of error return is DMA_MAPPING_ERROR, we coalesce those errors into EIO. ENOMEM is returned when no page tables can be allocated. Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Return appropriate error codes EINVAL or ENOMEM from iommup_dma_map_sg(). If lower level code returns ENOMEM, then we return it, other errors are coalesced into EINVAL. iommu_dma_map_sg_swiotlb() returns -EIO as its an unknown error from a call that returns DMA_MAPPING_ERROR. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Convert to ssize_t return code so the return code from __iommu_map() can be returned all the way down through dma_iommu_map_sg(). Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Now that the map_sg() op expects error codes instead of return zero on error, convert dma_direct_map_sg() to return an error code. Per the documentation for dma_map_sgtable(), -EIO is returned due to an DMA_MAPPING_ERROR with unknown cause. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Logan Gunthorpe authored
Allow dma_map_sgtable() to pass errors from the map_sg() ops. This will be required for returning appropriate error codes when mapping P2PDMA memory. Introduce __dma_map_sg_attrs() which will return the raw error code from the map_sg operation (whether it be negative or zero). Then add a dma_map_sg_attrs() wrapper to convert any negative errors to zero to satisfy the existing calling convention. dma_map_sgtable() defines three error codes that .map_sg implementations are allowed to return: -EINVAL, -ENOMEM and -EIO. The latter of which is a generic return for cases that are passing DMA_MAPPING_ERROR through. dma_map_sgtable() will convert a zero error return for old map_sg() ops into a -EIO return and return any negative errors as reported. This allows map_sg implementations to start returning multiple negative error codes. Legacy map_sg implementations can continue to return zero until they are all converted. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Anthony Iliopoulos authored
Due to link order, dma_debug_init is called before debugfs has a chance to initialize (via debugfs_init which also happens in the core initcall stage), so the directories for dma-debug are never created. Decouple dma_debug_fs_init from dma_debug_init and defer its init until core_initcall_sync (after debugfs has been initialized) while letting dma-debug initialization occur as soon as possible to catch any early mappings, as suggested in [1]. [1] https://lore.kernel.org/linux-iommu/YIgGa6yF%2Fadg8OSN@kroah.com/ Fixes: 15b28bbc ("dma-debug: move initialization to common code") Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Kefeng Wang authored
There is already a memory_intersects() helper in sections.h, use memory_intersects() directly instead of private overlap(). Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- 08 Aug, 2021 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single timer fix: - Prevent a memory ordering issue in the timer expiry code which makes it possible to observe falsely that the callback has been executed already while that's not the case, which violates the guarantee of del_timer_sync()" * tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Move clearing of base::timer_running under base:: Lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix: - Prevent a double enqueue caused by rt_effective_prio() being invoked twice in __sched_setscheduler()" * tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix double enqueue caused by rt_effective_prio
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A set of perf fixes: - Correct the permission checks for perf event which send SIGTRAP to a different process and clean up that code to be more readable. - Prevent an out of bound MSR access in the x86 perf code which happened due to an incomplete limiting to the actually available hardware counters. - Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running inside a guest. - Handle small core counter re-enabling correctly by issuing an ACK right before reenabling it to prevent a stale PEBS record being kept around" * tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Apply mid ACK for small core perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest perf/x86: Fix out of bound MSR access perf: Refactor permissions check into perf_check_permission() perf: Fix required permissions if sigtrap is requested
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.14-rc5. They resolve a few regressions that people reported: - acrn driver fix - fpga driver fix - interconnect tiny driver fixes All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: Fix undersized devress_alloc allocation interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes fpga: dfl: fme: Fix cpu hotplug issue in performance reporting virt: acrn: Do hcall_destroy_vm() before resource release interconnect: Always call pre_aggregate before aggregate interconnect: Zero initial BW after sync-state
-
Linus Torvalds authored
Merge tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three tiny driver core and firmware loader fixes for 5.14-rc5. They are: - driver core fix for when probing fails - firmware loader fixes for reported problems. All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware_loader: fix use-after-free in firmware_fallback_sysfs firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback drivers core: Fix oops when driver probe fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are a few small staging driver fixes for 5.14-rc5 to resolve some reported problems. They include: - mt7621 driver fix - rtl8723bs driver fixes - rtl8712 driver fixes. Nothing major, just small problems resolved. All have been in linux-next for a while with no reported issues" * tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: mt7621-pci: avoid to re-disable clock for those pcies not in use staging: rtl8712: error handling refactoring staging: rtl8712: get rid of flush_scheduled_work staging: rtl8723bs: select CONFIG_CRYPTO_LIB_ARC4 staging: rtl8723bs: Fix a resource leak in sd_int_dpc
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a number of reported problems. They include: - mips serial driver fixes - 8250 driver fixes for reported problems - fsl_lpuart driver fixes - other tiny driver fixes All have been in linux-next for a while with no reported problems" * tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts. serial: 8250_mtk: fix uart corruption issue when rx power off tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver serial: 8250: fix handle_irq locking serial: tegra: Only print FIFO error message when an error occurs MIPS: Malta: Do not byte-swap accesses to the CBUS UART serial: 8250: Mask out floating 16/32-bit bus bits serial: max310x: Unprepare and disable clock in error path
-