- 31 Jul, 2024 5 commits
-
-
Imre Deak authored
If the DDI encoder output is enabled in HDMI mode there is no point in calling intel_dp_sync_state(), as in that case the DPCD initialization will fail - as expected - with AUX timeouts. Prevent calling the hook in this case. Reviewed-by:
Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-5-imre.deak@intel.com
-
Imre Deak authored
In the if (old_ddps != port->ddps || !created) if (port->ddps && !port->input) ret = drm_dp_send_enum_path_resources(); sequence the first if's condition is true if the port exists already (!created) or the port was created anew (hence old_ddps==0) and it was in the plugged state (port->ddps==1). The second if's condition is true for output ports in the plugged state. So the function is called for an output port in the plugged state, regardless if it already existed or not and regardless of the old plugged state. In all other cases port->full_pbn can be zeroed as the port is either an input for which full_pbn is never set, or an output in the unplugged state for which full_pbn was already zeroed previously or the port was just created (with port->full_pbn==0). Simplify the condition, making it clear that the path resources are always enumerated for an output port in the plugged state. Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Imre Deak authored
A follow up i915 patch will need to reprobe the MST topology after the initial probing, add a helper for this. Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Imre Deak authored
Factor out a function to queue a work for probing the topology, also used by the next patch. Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Jani Nikula authored
The comments do not add any value. Remove. Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240729173320.1053791-1-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
- 30 Jul, 2024 3 commits
-
-
Nikita Zhandarovich authored
On the off chance that clock value ends up being too high (by means of skl_ddi_calculate_wrpll() having been called with big enough value of crtc_state->port_clock * 1000), one possible consequence may be that the result will not be able to fit into signed int. Fix this issue by moving conversion of clock parameter from kHz to Hz into the body of skl_ddi_calculate_wrpll(), as well as casting the same parameter to u64 type while calculating the value for AFE clock. This both mitigates the overflow problem and avoids possible erroneous integer promotion mishaps. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 82d35437 ("drm/i915/skl: Implementation of SKL DPLL programming") Cc: stable@vger.kernel.org Signed-off-by:
Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by:
-
Suraj Kandpal authored
Fix HDCP2_STREAM_STATUS macro, it called pipe instead of port never threw a compile error as no one used it. --v2 -Add Fixes [Jani] Fixes: d631b984 ("drm/i915/hdcp: Add HDCP 2.2 stream register") Signed-off-by:
-
Mitul Golani authored
AS SDP should be computed when VRR timing generator is also enabled. Correct the compute condition to compute params of Adaptive sync SDP when VRR timing genrator is enabled along with sink support indication. --v2: Modify if condition (Jani). Fixes: b2013783 ("drm/i915/display: Cache adpative sync caps to use it later") Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: intel-xe@lists.freedesktop.org Signed-off-by:
Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
- 29 Jul, 2024 1 commit
-
-
Lucas De Marchi authored
Being part o the display, ideally the setup and cleanup would be done by display itself. However this is a bigger refactor that needs to be done on both i915 and xe. For now, just fix the leak: unreferenced object 0xffff8881a0300008 (size 192): comm "modprobe", pid 4354, jiffies 4295647021 hex dump (first 32 bytes): 00 00 87 27 81 88 ff ff 18 80 9b 00 00 c9 ff ff ...'............ 18 81 9b 00 00 c9 ff ff 00 00 00 00 00 00 00 00 ................ backtrace (crc 99260e31): [<ffffffff823ce65b>] kmemleak_alloc+0x4b/0x80 [<ffffffff81493be2>] kmalloc_trace_noprof+0x312/0x3d0 [<ffffffffa1345679>] intel_opregion_setup+0x89/0x700 [xe] [<ffffffffa125bfaf>] xe_display_init_noirq+0x2f/0x90 [xe] [<ffffffffa1199ec3>] xe_device_probe+0x7a3/0xbf0 [xe] [<ffffffffa11f3713>] xe_pci_probe+0x333/0x5b0 [xe] [<ffffffff81af6be8>] local_pci_probe+0x48/0xb0 [<ffffffff81af8778>] pci_device_probe+0xc8/0x280 [<ffffffff81d09048>] really_probe+0xf8/0x390 [<ffffffff81d0937a>] __driver_probe_device+0x8a/0x170 [<ffffffff81d09503>] driver_probe_device+0x23/0xb0 [<ffffffff81d097b7>] __driver_attach+0xc7/0x190 [<ffffffff81d0628d>] bus_for_each_dev+0x7d/0xd0 [<ffffffff81d0851e>] driver_attach+0x1e/0x30 [<ffffffff81d07ac7>] bus_add_driver+0x117/0x250 Fixes: 44e69495 ("drm/xe/display: Implement display support") Reviewed-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240724215309.644423-1-lucas.demarchi@intel.comSigned-off-by:
Lucas De Marchi <lucas.demarchi@intel.com>
-
- 25 Jul, 2024 4 commits
-
-
Suraj Kandpal authored
Clear VSC SDP if intel_dp_set_infoframes is called from post ddi disable routine i.e with the variable of enable as false. This is to avoid an infoframes.enable mismatch issue which is caused when pipe is connected to eDp which has psr then connected to DPMST. In this case eDp's post ddi disable routine does not clear infoframes.enable VSC for the given pipe and DPMST does not recompute VSC SDP and write infoframes.enable which causes a mismatch. --v2 -Make the comment match the code [Jani] Signed-off-by:
-
Suraj Kandpal authored
Sometimes xe_gsc is not initialized when checked at HDCP capability check. Add gsc structure check to avoid null pointer error. Signed-off-by:
Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722064451.3610512-4-suraj.kandpal@intel.com
-
Suraj Kandpal authored
Add encoder check in intel_hdcp2_get_capability to avoid null pointer error. Signed-off-by:
-
Suraj Kandpal authored
Sometimes during hotplug scenario or suspend/resume scenario encoder is not always initialized when intel_hdcp_get_capability add a check to avoid kernel null pointer dereference. Signed-off-by:
-
- 24 Jul, 2024 1 commit
-
-
Colin Ian King authored
Don't populate the read-only array bw_gbps on the stack at run time, instead make it static const. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
- 22 Jul, 2024 4 commits
-
-
Easwar Hariharan authored
I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave" with more appropriate terms. Inspired by Wolfram's series to fix drivers/i2c/, fix the terminology for users of I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists in the specification. Reviewed-by:
Zhi Wang <zhiwang@kernel.org> Signed-off-by:
Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Imre Deak authored
After a bad link state is detected, the sink capabilities with which the link was originally trained could have changed: for instance another sink got connected or the retraining was forced after the rate/lane count got decreased (as a fallback). In these cases the retraining modeset fails as expected also printing a debug message, so don't WARN on it. Reviewed-by:
-
Imre Deak authored
After the previous patch link training happens always with a valid atomic state, so remove the NOTE comments and asserts which required a valid state only for DP-MST and allowed for a NULL state for DP-SST. Reviewed-by:
-
Imre Deak authored
Instead of direct calls of the link training functions, use a modeset commit to retrain a DP link in SST mode, similarly to how this is done in DP-MST mode. Originally the current way was chosen presumedly, because there wasn't a well-established way in place for the driver to do an internal (vs. userspace/kernel client) commit. Since then such internal commits became a common place (initial-, HDMI/TC link reset commit), so there is no reason to handle the DP-SST link-retraining case differently. At the end of the current sequence the HW reported a FIFO underrun - without other issues visible to users - because during retraining the link's encoder/port was disabled/re-enabled without also disabling/re-enabling the corresponding pipe/transcoder (as required by the spec); the corresponding underrun error message was suppressed as a known issue. Based on Ankit's test on DG2 the underrun error was still reported as it got detected with some (vblank) delay wrt. other platforms. Switching to a modeset commit resolves these underrun related issues. Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
- 12 Jul, 2024 15 commits
-
-
Ville Syrjälä authored
Extract a helper to determine the CFB bytes per pixel value. Currently this is always 4, but that could change in the future. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240705145254.3355-14-ville.syrjala@linux.intel.comReviewed-by:
Uma Shankar <uma.shankar@intel.com>
-
Ville Syrjälä authored
Pull the lower level stuff out from intel_fbc_cfb_size() into a separate function that doesn't depend on the plane_state. Signed-off-by:
-
Ville Syrjälä authored
Pull the code to determine the maximum CFB height into a separate function. To make this work we need to declare an explicit max height for all older platforms as well. But that is actually just the max plane height as pre-HSW hardware supposedly doesn't have the trick of leaving the extra lines uncompressed. Signed-off-by:
-
Ville Syrjälä authored
Rearrange the max CFB max height platform into the more common "new first, old last" order. Signed-off-by:
-
Ville Syrjälä authored
Use the more customary name 'height' instead of 'lines'. Signed-off-by:
-
Ville Syrjälä authored
Pull the lower level stuff out from intel_fbc_cfb_stride() into a separate function that doesn't depend on the plane_state. Signed-off-by:
-
Ville Syrjälä authored
Do the "is this ilk+ or g4x" checks in the customary order instead of the reverse order. Easier for the poor brain to parse this when it's always done the same way. Signed-off-by:
-
Ville Syrjälä authored
Rename intel_fbc_hw_tracking_covers_screen() to intel_fbc_surface_size_ok() so that the naming scheme is the same for the surface size vs. plane size checks. "surface size" is what bspec talks about. Signed-off-by:
-
Ville Syrjälä authored
Extract intel_fbc_max_surface_size() from intel_fbc_hw_tracking_covers_screen(), mainly to mirror the "max plane size" counterparts. Signed-off-by:
-
Ville Syrjälä authored
Extract intel_fbc_max_plane_size() from intel_fbc_plane_size_valid(). We'll have another use for this soon in determining how much stolen memory we'd like to keep reserved for FBC. Signed-off-by:
-
Ville Syrjälä authored
_intel_fbc_cfb_stride() calculates the CFB stride the hardware would automagically generate from the plane's stride. Rename the function to intel_fbc_plane_cfb_stride() to better reflect its purpose. Signed-off-by:
-
Ville Syrjälä authored
Switch the FBC code over to intel_display from i915, as much as possible. This is the future direction so that the display code can be shared between i915 and xe more cleanly. Some of the platform checks and the stolen mem facing stiff still need i915 around though. v2: Drop some redundant to_i915() casts Signed-off-by:
-
Ville Syrjälä authored
Pull the "do we have fences?" check into a single helper in the FBC code. Avoids having to call to outside the display code in multiple places for this. Signed-off-by:
-
Ville Syrjälä authored
Give vrr_enabling() and vrr_disabling() slightly fancier names, and pass in the whole atomic state so that they'll be easier to use. We'll need to call at least the disabling part from the DSB code soon enough (so that we can do vblank evasions/etc. correctly on the DSB). Signed-off-by:
Animesh Manna <animesh.manna@intel.com>
-
Ville Syrjälä authored
Calculate the vblank delay in the vblank evasion code correctly for interlaced modes. The current code assumes that we won't be using an interlaced mode. That assumption is actually valid since we've defeatured interlaced scanout in commit f71c9b7b ("drm/i915/display: Prune Interlace modes for Display >=12") for DSB capable platforms. However the feature is still present in the hardware, and if we ever find the need to re-enable it seems better to calculate the vblank delay correctly. Signed-off-by:
-
- 11 Jul, 2024 4 commits
-
-
Imre Deak authored
Nothing depends on the cached LTTPR mode, however for consistency keep it up-to-date with the value programmed to the DPCD register. Reviewed-by:
-
Imre Deak authored
After detection the cached LTTPR count can be checked to determine if LTTPRs in non-transparent mode were detected. Reset the cached LTTPR count if the reported number of LTTPRs is invalid to ensure the above checks work as expected. Reviewed-by:
-
Imre Deak authored
Switching to transparent mode leads to a loss of link synchronization, so prevent doing this on an active link. This happened at least on an Intel N100 system / DELL UD22 dock, the LTTPR residing either on the host or the dock. To fix the issue, keep the current mode on an active link, adjusting the LTTPR count accordingly (resetting it to 0 in transparent mode). v2: Adjust code comment during link training about reiniting the LTTPRs. (Ville) Fixes: 7b2a4ab8 ("drm/i915: Switch to LTTPR transparent mode link training") Reported-and-tested-by:
Gareth Yu <gareth.yu@intel.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10902 Cc: <stable@vger.kernel.org> # v5.15+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Regularly retraining a link during an atomic commit happens with the given pipe/link already disabled and hence intel_dp->link_trained being false. Ensure this also for retraining a DP SST link via direct calls to the link training functions (vs. an actual commit as for DP MST). So far nothing depended on this, however the next patch will depend on link_trained==false for changing the LTTPR mode to non-transparent. Cc: <stable@vger.kernel.org> # v5.15+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
- 10 Jul, 2024 1 commit
-
-
Mitul Golani authored
The dispcnlunit1_cp_xosc_clk should be de-asserted in display off and only asserted in display on. As part of this workaround, Display driver shall execute set-reset sequence at the end of the initialize sequence to ensure clk does not remain active in display OFF. --v2: - Rebase. --v3: - Correct HSD number in commit message. --v4: - Reformat commit message. - Use intel_de_rmw instead of intel_de_write --v5: - Build Fixes. WA: 15013987218 Signed-off-by:
Nemesa Garg <nemesa.garg@intel.com> Reviewed-by:
-
- 09 Jul, 2024 1 commit
-
-
Mitul Golani authored
Add new member to struct intel_dp to cache support of Adaptive Sync SDP capabilities and use it whenever required to avoid HW access to read capability during each atomic commit. -v2: - Squash both the patches Signed-off-by:
Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240704082638.2302092-2-mitulkumar.ajitkumar.golani@intel.comSigned-off-by:
-
- 01 Jul, 2024 1 commit
-
-
Gustavo Sousa authored
Starting with Xe_LPD+, although FIA is still used to readout Type-C pin assignment, part of Type-C support is moved to PICA and programming PORT_TX_DFLEXDPMLE1(*) registers is not applicable anymore like it was for previous display IPs (e.g. see BSpec 49190). v2: - Mention Bspec 49190 as a reference of instructions for previous IPs. (Shekhar Chauhan) - s/Xe_LPDP/Xe_LPD+/ in the commit message. (Matt Roper) - Update commit message to be more accurate to the changes in the IP. (Imre Deak) Bspec: 65750, 65448 Reviewed-by:Shekhar Chauhan <shekhar.chauhan@intel.com> Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com>
-
