- 05 Feb, 2020 39 commits
-
-
Arnaud Pouliquen authored
[ Upstream commit ce780a47 ] Change mutex and spinlock management to avoid sleep in atomic issue. Signed-off-by:
Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20200113100400.30472-1-arnaud.pouliquen@st.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hans de Goede authored
[ Upstream commit 1f27dbd8 ] Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70). Cc: Jason Anderson <jasona.594@gmail.com> Reported-by:
Jason Anderson <jasona.594@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Manfred Rudigier authored
[ Upstream commit 5365ec1a ] Changing the link mode should also be done for 100BaseFX SGMII modules, otherwise they just don't work when the default link mode in CTRL_EXT coming from the EEPROM is SERDES. Additionally 100Base-LX SGMII SFP modules are also supported now, which was not the case before. Tested with an i210 using Flexoptix S.1303.2M.G 100FX and S.1303.10.G 100LX SGMII SFP modules. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Cambda Zhu authored
[ Upstream commit 4fad78ad ] This patch fixes the calculation of queue when we restore flow director filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's vf may be zero which makes the queue outside of the rx_ring array. The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry(). Signed-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Radoslaw Tyl authored
[ Upstream commit aa604651 ] Currently, though the FDB entry is added to VF, it does not appear in RAR filters. VF driver only allows to add 10 entries. Attempting to add another causes an error. This patch removes limitation and allows use of all free RAR entries for the FDB if needed. Fixes: 46ec20ff ("ixgbevf: Add macvlan support in the set rx mode op") Signed-off-by:
Radoslaw Tyl <radoslawx.tyl@intel.com> Acked-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 89b71b3f ] The rt5640->jack is NULL if jack is already disabled at the time of driver's module unloading. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200106014707.11378-1-digetx@gmail.comSigned-off-by:
-
Lubomir Rintel authored
[ Upstream commit 8bea5ac0 ] Determined empirically, no documentation is available. The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing what is going on, ended up just dividing the rate as of commit f36797ee ("ARM: mmp/mmp2: dt: enable the clock")' Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.skSigned-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Markus Theil authored
[ Upstream commit 02a61449 ] The following warning is triggered every time an unestablished mesh peer gets dumped. Checks if a peer link is established before retrieving the airtime link metric. [ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345 airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3 [ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022838] Call Trace: [ 9563.022897] sta_set_sinfo+0x936/0xa10 [mac80211] [ 9563.022964] ieee80211_dump_station+0x6d/0x90 [mac80211] [ 9563.023062] nl80211_dump_station+0x154/0x2a0 [cfg80211] [ 9563.023120] netlink_dump+0x17b/0x370 [ 9563.023130] netlink_recvmsg+0x2a4/0x480 [ 9563.023140] ____sys_recvmsg+0xa6/0x160 [ 9563.023154] ___sys_recvmsg+0x93/0xe0 [ 9563.023169] __sys_recvmsg+0x7e/0xd0 [ 9563.023210] do_syscall_64+0x4e/0x140 [ 9563.023217] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de [rewrite commit message] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Samuel Holland authored
[ Upstream commit 0c545240 ] According to the BSP source code, both the AR100 and R_APB2 clocks have PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre- divider used for PLL_PERIPH0 should be changed to index 3 to match. This was verified by running a rough benchmark on the AR100 with various clock settings: | mux | pre-divider | iterations/second | clock source | |=====|=============|===================|==============| | 0 | 0 | 19033 (stable) | osc24M | | 2 | 5 | 11466 (unstable) | iosc/osc16M | | 2 | 17 | 11422 (unstable) | iosc/osc16M | | 3 | 5 | 85338 (stable) | pll-periph0 | | 3 | 17 | 27167 (stable) | pll-periph0 | The relative performance numbers all match up (with pll-periph0 running at its default 600MHz). Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Mathieu Desnoyers authored
[ Upstream commit 463f550f ] It has been reported by Google that rseq is not behaving properly with respect to clone when CLONE_VM is used without CLONE_THREAD. It keeps the prior thread's rseq TLS registered when the TLS of the thread has moved, so the kernel can corrupt the TLS of the parent. The approach of clearing the per task-struct rseq registration on clone with CLONE_THREAD flag is incomplete. It does not cover the use-case of clone with CLONE_VM set, but without CLONE_THREAD. Here is the rationale for unregistering rseq on clone with CLONE_VM flag set: 1) CLONE_THREAD requires CLONE_SIGHAND, which requires CLONE_VM to be set. Therefore, just checking for CLONE_VM covers all CLONE_THREAD uses. There is no point in checking for both CLONE_THREAD and CLONE_VM, 2) There is the possibility of an unlikely scenario where CLONE_SETTLS is used without CLONE_VM. In order to be an issue, it would require that the rseq TLS is in a shared memory area. I do not plan on adding CLONE_SETTLS to the set of clone flags which unregister RSEQ, because it would require that we also unregister RSEQ on set_thread_area(2) and arch_prctl(2) ARCH_SET_FS for completeness. So rather than doing a partial solution, it appears better to let user-space explicitly perform rseq unregistration across clone if needed in scenarios where CLONE_VM is not set. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191211161713.4490-3-mathieu.desnoyers@efficios.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Hewenliang authored
[ Upstream commit f84ae29a ] It is necessary to call free_arg(arg) when add_filter_type() returns NULL in filter_event(). Signed-off-by:
Hewenliang <hewenliang4@huawei.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20191209063549.59941-1-hewenliang4@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Dave Gerlach authored
[ Upstream commit 03729cfa ] Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this checks the value of the static variable m3_ipc_state to see if the wkup_m3 is ready. Currently this is populated during probe before rproc_boot has been called, meaning there is a window of time that wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not ready, leading to invalid IPC calls to the wkup_m3 and system instability. To avoid this, move the population of the m3_ipc_state variable until after rproc_boot has succeeded to guarantee a valid and usable handle is always returned. Reported-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit e17e7c49 ] On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit 81cc0877 ] PERST# line in the PCIE connector is driven by the host mode and not EP mode. The gpios property here is used for driving the PERST# line. Remove gpios property from all endpoint device tree nodes. Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 1c226017 ] Current USB3503 driver ignores GPIO polarity and always operates as if the GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing USB3503 chip applications to match the chip specification and common convention for naming the pins. The only pin, which has to be ACTIVE_LOW is the reset pin. The remaining are ACTIVE_HIGH. This change allows later to fix the USB3503 driver to properly use generic GPIO bindings and read polarity from DT. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Lee Jones authored
A pointer to 'struct si470x_device' is currently used after free: drivers/media/radio/si470x/radio-si470x-i2c.c:462:25-30: ERROR: reference preceded by free on line 460 Shift the call to free() down past its final use. NB: Not sending to Mainline, since the problem does not exist there, it was caused by the backport of 2df200ab ("media: si470x-i2c: add missed operations in remove") to the stable trees. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by:kbuild test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Koutný authored
commit 3bc0bb36 upstream. The test_cgcore_no_internal_process_constraint_on_threads selftest when running with subsystem controlling noise triggers two warnings: > [ 597.443115] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3131 cgroup_apply_control_enable+0xe0/0x3f0 > [ 597.443413] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3177 cgroup_apply_control_disable+0xa6/0x160 Both stem from a call to cgroup_type_write. The first warning was also triggered by syzkaller. When we're switching cgroup to threaded mode shortly after a subsystem was disabled on it, we can see the respective subsystem css dying there. The warning in cgroup_apply_control_enable is harmless in this case since we're not adding new subsys anyway. The warning in cgroup_apply_control_disable indicates an attempt to kill css of recently disabled subsystem repeatedly. The commit prevents these situations by making cgroup_type_write wait for all dying csses to go away before re-applying subtree controls. When at it, the locations of WARN_ON_ONCE calls are moved so that warning is triggered only when we are about to misuse the dying css. Reported-by: syzbot+5493b2a54d31d6aea629@syzkaller.appspotmail.com Reported-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
Michal Koutný <mkoutny@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 11eb85ec upstream. Syzbot managed to trigger a use after free "KASAN: use-after-free Write in hci_sock_bind". I have reviewed the code manually and one possibly cause I have found is that we are not holding lock_sock(sk) when we do the hci_dev_put(hdev) in hci_sock_release(). My theory is that the bind and the release are racing against each other which results in this use after free. Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Zhenzhong Duan authored
commit 9a655c77 upstream. tpk_write()/tpk_close() could be interrupted when holding a mutex, then in timer handler tpk_write() may be called again trying to acquire same mutex, lead to deadlock. Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:938 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1 1 lock held by swapper/1/0: ... Call Trace: <IRQ> dump_stack+0x197/0x210 ___might_sleep.cold+0x1fb/0x23e __might_sleep+0x95/0x190 __mutex_lock+0xc5/0x13c0 mutex_lock_nested+0x16/0x20 tpk_write+0x5d/0x340 resync_tnc+0x1b6/0x320 call_timer_fn+0x1ac/0x780 run_timer_softirq+0x6c3/0x1790 __do_softirq+0x262/0x98c irq_exit+0x19b/0x1e0 smp_apic_timer_interrupt+0x1a3/0x610 apic_timer_interrupt+0xf/0x20 </IRQ> See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for more details. Fix it by using spinlock in process context instead of mutex and having interrupt disabled in critical section. Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.comSigned-off-by:
-
Tetsuo Handa authored
commit a8772fad upstream. syzbot is reporting that there is a race at tomoyo_stat_update() [1]. Although it is acceptable to fail to track exact number of times policy was updated, convert to atomic_t because this is not a hot path. [1] https://syzkaller.appspot.com/bug?id=a4d7b973972eeed410596e6604580e0133b0fc04Reported-by:
syzbot <syzbot+efea72d4a0a1d03596cd@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Hans Verkuil authored
commit 569bc8d6 upstream. This fixes a syzbot failure since actlen could be uninitialized, but it was still used. Syzbot link: https://syzkaller.appspot.com/bug?extid=6bf9606ee955b646c0e1 Reported-and-tested-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit de89d086 upstream. Allocate gspca_dev->usb_buf with kzalloc instead of kmalloc to ensure it is property zeroed. This fixes various syzbot errors about uninitialized data. Syzbot links: https://syzkaller.appspot.com/bug?extid=32310fc2aea76898d074 https://syzkaller.appspot.com/bug?extid=99706d6390be1ac542a2 https://syzkaller.appspot.com/bug?extid=64437af5c781a7f0e08e Reported-and-tested-by: syzbot+32310fc2aea76898d074@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+99706d6390be1ac542a2@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+64437af5c781a7f0e08e@syzkaller.appspotmail.com Signed-off-by:
-
Sean Young authored
commit 26cff637 upstream. It is not a fatal error if reading the mac address or the remote control decoder state fails. Reported-by: syzbot+ec869945d3dde5f33b43@syzkaller.appspotmail.com Signed-off-by:
-
Sean Young authored
commit 51d0c99b upstream. If usb_bulk_msg() fails, actual_length can be uninitialized. Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com Signed-off-by:
-
Sean Young authored
commit eecc70d2 upstream. This results in an uninitialized variable read. Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com Signed-off-by:
-
Jan Kara authored
commit 5474ca7d upstream. When a filesystem is mounted with jdev mount option, we store the journal device name in an allocated string in superblock. However we fail to ever free that string. Fix it. Reported-by: syzbot+1c6756baf4b16b94d2a6@syzkaller.appspotmail.com Fixes: c3aa0776 ("reiserfs: Properly display mount options in /proc/mounts") CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dan Carpenter authored
commit c7a91bc7 upstream. What we are trying to do is change the '=' character to a NUL terminator and then at the end of the function we restore it back to an '='. The problem is there are two error paths where we jump to the end of the function before we have replaced the '=' with NUL. We end up putting the '=' in the wrong place (possibly one element before the start of the buffer). Link: http://lkml.kernel.org/r/20200115055426.vdjwvry44nfug7yy@kili.mountain Reported-by: syzbot+e64a13c5369a194d67df@syzkaller.appspotmail.com Fixes: 095f1fc4 ("mempolicy: rework shmem mpol parsing and display") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Dmitry Vyukov <dvyukov@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Theodore Ts'o authored
commit 9803387c upstream. Instead of setting s_want_extra_size and then making sure that it is a valid value afterwards, validate the field before we set it. This avoids races and other problems when remounting the file system. Link: https://lore.kernel.org/r/20191215063020.GA11512@mit.edu Cc: stable@kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reported-and-tested-by: syzbot+4a39a025912b265cacef@syzkaller.appspotmail.com Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Dirk Behme authored
commit d7bbd6c1 upstream. Since v4.3-rc1 commit 0723c05f ("arm64: enable more compressed Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo} AArch64 images. However, the commit missed adding support for removing those images on 'make ARCH=arm64 (dist)clean'. Fix this by adding them to the target list. Make sure to match the order of the recipes in the makefile. Cc: stable@vger.kernel.org # v4.3+ Fixes: 0723c05f ("arm64: enable more compressed Image formats") Signed-off-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Vitaly Chikunov authored
commit 6c4798d3 upstream. Disable a couple of compilation warnings (which are treated as errors) on strlcpy() definition and declaration, allowing users to compile perf and kernel (objtool) when: 1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and perf build fails with this (in gcc): In file included from exec-cmd.c:3: tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls] 20 | extern size_t strlcpy(char *dest, const char *src, size_t size); 2. clang ignores `-Wredundant-decls', but produces another warning when building perf: CC util/string.o ../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] size_t __weak strlcpy(char *dest, const char *src, size_t size) ../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak' # define __weak __attribute__((weak)) /usr/include/bits/string_fortified.h:151:8: note: previous definition is here __NTH (strlcpy (char *__restrict __dest, const char *__restrict __src, Committer notes: The #pragma GCC diagnostic directive was introduced in gcc 4.6, so check for that as well. Fixes: ce990917 ("perf tools: Move strlcpy() from perf to tools/lib/string.c") Fixes: 0215d59b ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__") Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481Signed-off-by:
Vitaly Chikunov <vt@altlinux.org> Reviewed-by:
Dmitry Levin <ldv@altlinux.org> Cc: Dmitry Levin <ldv@altlinux.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: kbuild test robot <lkp@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: Vineet Gupta <vineet.gupta1@synopsys.com> Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.orgSigned-off-by:
-
Chanwoo Choi authored
commit 2fee1a7c upstream. The commit 4585fbcb ("PM / devfreq: Modify the device name as devfreq(X) for sysfs") changed the node name to devfreq(x). After this commit, it is not possible to get the device name through /sys/class/devfreq/devfreq(X)/*. Add new name attribute in order to get device name. Cc: stable@vger.kernel.org Fixes: 4585fbcb ("PM / devfreq: Modify the device name as devfreq(X) for sysfs") Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Andres Freund authored
commit c1c8013e upstream. Commit 722ddfde ("perf tools: Fix time sorting") changed - correctly so - hist_entry__sort to return int64. Unfortunately several of the builtin-c2c.c comparison routines only happened to work due the cast caused by the wrong return type. This causes meaningless ordering of both the cacheline list, and the cacheline details page. E.g a simple: perf c2c record -a sleep 3 perf c2c report will result in cacheline table like ================================================= Shared Data Cache Line Table ================================================= # # ------- Cacheline ---------- Total Tot - LLC Load Hitm - - Store Reference - - Load Dram - LLC Total - Core Load Hit - - LLC Load Hit - # Index Address Node PA cnt records Hitm Total Lcl Rmt Total L1Hit L1Miss Lcl Rmt Ld Miss Loads FB L1 L2 Llc Rmt # ..... .............. .... ...... ....... ...... ..... ..... ... .... ..... ...... ...... .... ...... ..... ..... ..... ... .... ....... 0 0x7f0d27ffba00 N/A 0 52 0.12% 13 6 7 12 12 0 0 7 14 40 4 16 0 0 0 1 0x7f0d27ff61c0 N/A 0 6353 14.04% 1475 801 674 779 779 0 0 718 1392 5574 1299 1967 0 115 0 2 0x7f0d26d3ec80 N/A 0 71 0.15% 16 4 12 13 13 0 0 12 24 58 1 20 0 9 0 3 0x7f0d26d3ec00 N/A 0 98 0.22% 23 17 6 19 19 0 0 6 12 79 0 40 0 10 0 i.e. with the list not being ordered by Total Hitm. Fixes: 722ddfde ("perf tools: Fix time sorting") Signed-off-by:
Andres Freund <andres@anarazel.de> Tested-by:
Michael Petlan <mpetlan@redhat.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org # v3.16+ Link: http://lore.kernel.org/lkml/20200109043030.233746-1-andres@anarazel.deSigned-off-by:
-
Johan Hovold authored
[ Upstream commit e93cd351 ] Make sure to stop both URBs before returning after failed probe as well as on disconnect to avoid use-after-free in the completion handler. Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com Fixes: a4302bff ("rsi: add bluetooth rx endpoint") Fixes: dad0d04f ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Siva Rebbagondla authored
[ Upstream commit cbde979b ] As we missed to detach HCI, while entering power off or hibernation, an extra hci interface gets created whenever system is woken up, to avoid this we added hci_detach() in rsi_disconnect(), rsi_freeze(), and rsi_shutdown() functions which are invoked for these tests. This patch fixes the issue Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 07bfd9bd ] On module unload of pcrypt we must unregister the crypto algorithms first and then tear down the padata structure. As otherwise the crypto algorithms are still alive and can be used while the padata structure is being freed. Fixes: 5068c7a8 ("crypto: pcrypt - Add pcrypt crypto...") Cc: <stable@vger.kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Xiaochen Shen authored
commit 334b0f4e upstream. There is a race condition which results in a deadlock when rmdir and mkdir execute concurrently: $ ls /sys/fs/resctrl/c1/mon_groups/m1/ cpus cpus_list mon_data tasks Thread 1: rmdir /sys/fs/resctrl/c1 Thread 2: mkdir /sys/fs/resctrl/c1/mon_groups/m1 3 locks held by mkdir/48649: #0: (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50 #1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c13b>] filename_create+0x7b/0x170 #2: (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70 4 locks held by rmdir/48652: #0: (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50 #1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c3cf>] do_rmdir+0x13f/0x1e0 #2: (&type->i_mutex_dir_key#8){++++}, at: [<ffffffffb4c86d5d>] vfs_rmdir+0x4d/0x120 #3: (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70 Thread 1 is deleting control group "c1". Holding rdtgroup_mutex, kernfs_remove() removes all kernfs nodes under directory "c1" recursively, then waits for sub kernfs node "mon_groups" to drop active reference. Thread 2 is trying to create a subdirectory "m1" in the "mon_groups" directory. The wrapper kernfs_iop_mkdir() takes an active reference to the "mon_groups" directory but the code drops the active reference to the parent directory "c1" instead. As a result, Thread 1 is blocked on waiting for active reference to drop and never release rdtgroup_mutex, while Thread 2 is also blocked on trying to get rdtgroup_mutex. Thread 1 (rdtgroup_rmdir) Thread 2 (rdtgroup_mkdir) (rmdir /sys/fs/resctrl/c1) (mkdir /sys/fs/resctrl/c1/mon_groups/m1) ------------------------- ------------------------- kernfs_iop_mkdir /* * kn: "m1", parent_kn: "mon_groups", * prgrp_kn: parent_kn->parent: "c1", * * "mon_groups", parent_kn->active++: 1 */ kernfs_get_active(parent_kn) kernfs_iop_rmdir /* "c1", kn->active++ */ kernfs_get_active(kn) rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) /* "c1", kn->active-- */ kernfs_break_active_protection(kn) mutex_lock rdtgroup_rmdir_ctrl free_all_child_rdtgrp sentry->flags = RDT_DELETED rdtgroup_ctrl_remove rdtgrp->flags = RDT_DELETED kernfs_get(kn) kernfs_remove(rdtgrp->kn) __kernfs_remove /* "mon_groups", sub_kn */ atomic_add(KN_DEACTIVATED_BIAS, &sub_kn->active) kernfs_drain(sub_kn) /* * sub_kn->active == KN_DEACTIVATED_BIAS + 1, * waiting on sub_kn->active to drop, but it * never drops in Thread 2 which is blocked * on getting rdtgroup_mutex. */ Thread 1 hangs here ----> wait_event(sub_kn->active == KN_DEACTIVATED_BIAS) ... rdtgroup_mkdir rdtgroup_mkdir_mon(parent_kn, prgrp_kn) mkdir_rdt_prepare(parent_kn, prgrp_kn) rdtgroup_kn_lock_live(prgrp_kn) atomic_inc(&rdtgrp->waitcount) /* * "c1", prgrp_kn->active-- * * The active reference on "c1" is * dropped, but not matching the * actual active reference taken * on "mon_groups", thus causing * Thread 1 to wait forever while * holding rdtgroup_mutex. */ kernfs_break_active_protection( prgrp_kn) /* * Trying to get rdtgroup_mutex * which is held by Thread 1. */ Thread 2 hangs here ----> mutex_lock ... The problem is that the creation of a subdirectory in the "mon_groups" directory incorrectly releases the active protection of its parent directory instead of itself before it starts waiting for rdtgroup_mutex. This is triggered by the rdtgroup_mkdir() flow calling rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() with kernfs node of the parent control group ("c1") as argument. It should be called with kernfs node "mon_groups" instead. What is currently missing is that the kn->priv of "mon_groups" is NULL instead of pointing to the rdtgrp. Fix it by pointing kn->priv to rdtgrp when "mon_groups" is created. Then it could be passed to rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() instead. And then it operates on the same rdtgroup structure but handles the active reference of kernfs node "mon_groups" to prevent deadlock. The same changes are also made to the "mon_data" directories. This results in some unused function parameters that will be cleaned up in follow-up patch as the focus here is on the fix only in support of backporting efforts. Backporting notes: Since upstream commit fa7d9493 ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c for older stable trees. Fixes: c7d9aac6 ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring") Suggested-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1578500886-21771-4-git-send-email-xiaochen.shen@intel.comSigned-off-by:
-
Xiaochen Shen authored
commit 074fadee upstream. There is a race condition in the following scenario which results in an use-after-free issue when reading a monitoring file and deleting the parent ctrl_mon group concurrently: Thread 1 calls atomic_inc() to take refcount of rdtgrp and then calls kernfs_break_active_protection() to drop the active reference of kernfs node in rdtgroup_kn_lock_live(). In Thread 2, kernfs_remove() is a blocking routine. It waits on all sub kernfs nodes to drop the active reference when removing all subtree kernfs nodes recursively. Thread 2 could block on kernfs_remove() until Thread 1 calls kernfs_break_active_protection(). Only after kernfs_remove() completes the refcount of rdtgrp could be trusted. Before Thread 1 calls atomic_inc() and kernfs_break_active_protection(), Thread 2 could call kfree() when the refcount of rdtgrp (sentry) is 0 instead of 1 due to the race. In Thread 1, in rdtgroup_kn_unlock(), referring to earlier rdtgrp memory (rdtgrp->waitcount) which was already freed in Thread 2 results in use-after-free issue. Thread 1 (rdtgroup_mondata_show) Thread 2 (rdtgroup_rmdir) -------------------------------- ------------------------- rdtgroup_kn_lock_live /* * kn active protection until * kernfs_break_active_protection(kn) */ rdtgrp = kernfs_to_rdtgroup(kn) rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_rmdir_ctrl free_all_child_rdtgrp /* * sentry->waitcount should be 1 * but is 0 now due to the race. */ kfree(sentry)*[1] /* * Only after kernfs_remove() * completes, the refcount of * rdtgrp could be trusted. */ atomic_inc(&rdtgrp->waitcount) /* kn->active-- */ kernfs_break_active_protection(kn) rdtgroup_ctrl_remove rdtgrp->flags = RDT_DELETED /* * Blocking routine, wait for * all sub kernfs nodes to drop * active reference in * kernfs_break_active_protection. */ kernfs_remove(rdtgrp->kn) rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test( &rdtgrp->waitcount) && (flags & RDT_DELETED) kernfs_unbreak_active_protection(kn) kfree(rdtgrp) mutex_lock mon_event_read rdtgroup_kn_unlock mutex_unlock /* * Use-after-free: refer to earlier rdtgrp * memory which was freed in [1]. */ atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) /* kn->active++ */ kernfs_unbreak_active_protection(kn) kfree(rdtgrp) Fix it by moving free_all_child_rdtgrp() to after kernfs_remove() in rdtgroup_rmdir_ctrl() to ensure it has the accurate refcount of rdtgrp. Backporting notes: Since upstream commit fa7d9493 ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c for older stable trees. Fixes: f3cbeaca ("x86/intel_rdt/cqm: Add rmdir support") Suggested-by:
-
Xiaochen Shen authored
commit b8511ccc upstream. A resource group (rdtgrp) contains a reference count (rdtgrp->waitcount) that indicates how many waiters expect this rdtgrp to exist. Waiters could be waiting on rdtgroup_mutex or some work sitting on a task's workqueue for when the task returns from kernel mode or exits. The deletion of a rdtgrp is intended to have two phases: (1) while holding rdtgroup_mutex the necessary cleanup is done and rdtgrp->flags is set to RDT_DELETED, (2) after releasing the rdtgroup_mutex, the rdtgrp structure is freed only if there are no waiters and its flag is set to RDT_DELETED. Upon gaining access to rdtgroup_mutex or rdtgrp, a waiter is required to check for the RDT_DELETED flag. When unmounting the resctrl file system or deleting ctrl_mon groups, all of the subdirectories are removed and the data structure of rdtgrp is forcibly freed without checking rdtgrp->waitcount. If at this point there was a waiter on rdtgrp then a use-after-free issue occurs when the waiter starts running and accesses the rdtgrp structure it was waiting on. See kfree() calls in [1], [2] and [3] in these two call paths in following scenarios: (1) rdt_kill_sb() -> rmdir_all_sub() -> free_all_child_rdtgrp() (2) rdtgroup_rmdir() -> rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp() There are several scenarios that result in use-after-free issue in following: Scenario 1: ----------- In Thread 1, rdtgroup_tasks_write() adds a task_work callback move_myself(). If move_myself() is scheduled to execute after Thread 2 rdt_kill_sb() is finished, referring to earlier rdtgrp memory (rdtgrp->waitcount) which was already freed in Thread 2 results in use-after-free issue. Thread 1 (rdtgroup_tasks_write) Thread 2 (rdt_kill_sb) ------------------------------- ---------------------- rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_move_task __rdtgroup_move_task /* * Take an extra refcount, so rdtgrp cannot be freed * before the call back move_myself has been invoked */ atomic_inc(&rdtgrp->waitcount) /* Callback move_myself will be scheduled for later */ task_work_add(move_myself) rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) mutex_lock rmdir_all_sub /* * sentry and rdtgrp are freed * without checking refcount */ free_all_child_rdtgrp kfree(sentry)*[1] kfree(rdtgrp)*[2] mutex_unlock /* * Callback is scheduled to execute * after rdt_kill_sb is finished */ move_myself /* * Use-after-free: refer to earlier rdtgrp * memory which was freed in [1] or [2]. */ atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp) Scenario 2: ----------- In Thread 1, rdtgroup_tasks_write() adds a task_work callback move_myself(). If move_myself() is scheduled to execute after Thread 2 rdtgroup_rmdir() is finished, referring to earlier rdtgrp memory (rdtgrp->waitcount) which was already freed in Thread 2 results in use-after-free issue. Thread 1 (rdtgroup_tasks_write) Thread 2 (rdtgroup_rmdir) ------------------------------- ------------------------- rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_move_task __rdtgroup_move_task /* * Take an extra refcount, so rdtgrp cannot be freed * before the call back move_myself has been invoked */ atomic_inc(&rdtgrp->waitcount) /* Callback move_myself will be scheduled for later */ task_work_add(move_myself) rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_rmdir_ctrl free_all_child_rdtgrp /* * sentry is freed without * checking refcount */ kfree(sentry)*[3] rdtgroup_ctrl_remove rdtgrp->flags = RDT_DELETED rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test( &rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp) /* * Callback is scheduled to execute * after rdt_kill_sb is finished */ move_myself /* * Use-after-free: refer to earlier rdtgrp * memory which was freed in [3]. */ atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp) If CONFIG_DEBUG_SLAB=y, Slab corruption on kmalloc-2k can be observed like following. Note that "0x6b" is POISON_FREE after kfree(). The corrupted bits "0x6a", "0x64" at offset 0x424 correspond to waitcount member of struct rdtgroup which was freed: Slab corruption (Not tainted): kmalloc-2k start=ffff9504c5b0d000, len=2048 420: 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkjkkkkkkkkkkk Single bit error detected. Probably bad RAM. Run memtest86+ or a similar memory test tool. Next obj: start=ffff9504c5b0d800, len=2048 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Slab corruption (Not tainted): kmalloc-2k start=ffff9504c58ab800, len=2048 420: 6b 6b 6b 6b 64 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkdkkkkkkkkkkk Prev obj: start=ffff9504c58ab000, len=2048 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Fix this by taking reference count (waitcount) of rdtgrp into account in the two call paths that currently do not do so. Instead of always freeing the resource group it will only be freed if there are no waiters on it. If there are waiters, the resource group will have its flags set to RDT_DELETED. It will be left to the waiter to free the resource group when it starts running and finding that it was the last waiter and the resource group has been removed (rdtgrp->flags & RDT_DELETED) since. (1) rdt_kill_sb() -> rmdir_all_sub() -> free_all_child_rdtgrp() (2) rdtgroup_rmdir() -> rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp() Backporting notes: Since upstream commit fa7d9493 ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c in older stable trees. Fixes: f3cbeaca ("x86/intel_rdt/cqm: Add rmdir support") Fixes: 60cf5e10 ("x86/intel_rdt: Add mkdir to resctrl file system") Suggested-by:
-
Al Viro authored
commit 6404674a upstream. Brown paperbag time: fetching ->i_uid/->i_mode really should've been done from nd->inode. I even suggested that, but the reason for that has slipped through the cracks and I went for dir->d_inode instead - made for more "obvious" patch. Analysis: - at the entry into do_last() and all the way to step_into(): dir (aka nd->path.dentry) is known not to have been freed; so's nd->inode and it's equal to dir->d_inode unless we are already doomed to -ECHILD. inode of the file to get opened is not known. - after step_into(): inode of the file to get opened is known; dir might be pointing to freed memory/be negative/etc. - at the call of may_create_in_sticky(): guaranteed to be out of RCU mode; inode of the file to get opened is known and pinned; dir might be garbage. The last was the reason for the original patch. Except that at the do_last() entry we can be in RCU mode and it is possible that nd->path.dentry->d_inode has already changed under us. In that case we are going to fail with -ECHILD, but we need to be careful; nd->inode is pointing to valid struct inode and it's the same as nd->path.dentry->d_inode in "won't fail with -ECHILD" case, so we should use that. Reported-by:
"Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com> Reported-by: syzbot+190005201ced78a74ad6@syzkaller.appspotmail.com Wearing-brown-paperbag: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Fixes: d0cb5018 ("do_last(): fetch directory ->i_mode and ->i_uid before it's too late") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 01 Feb, 2020 1 commit
-
-
Greg Kroah-Hartman authored
-
