- 02 Oct, 2020 4 commits
-
-
Felipe Balbi authored
Coccinelle suggests using PTR_ERR_OR_ZERO(). Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Sandeep Maheswaram authored
Add interconnect support in dwc3-qcom driver to vote for bus bandwidth. This requires for two different paths - from USB to DDR. The other is from APPS to USB. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Linus Walleij authored
The UDC NET2272 driver includes <linux/gpio.h> but does not use any symbols from this file, so drop the include. Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Peter Chen authored
Add Cadence USB3 DRD IP driver entry Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
- 24 Sep, 2020 14 commits
-
-
Cristian Birsan authored
Enable usb device for sam9x60ek board. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Cristian Birsan authored
The DPRAM memory from the USB High Speed Device Port (UDPHS) hardware block was increased. This patch updates the endpoint allocation for sam9x60 to take advantage of this larger memory. At the same time the constraint to allocate the endpoints in order was lifted. To handle old and new hardware in the same driver the ep_prealloc was added. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Cristian Birsan authored
Use 1 bank endpoints for control transfers Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Cristian Birsan authored
Simplify the endpoint allocation and cleanup the code. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Cristian Birsan authored
Add sam9x60 binding. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Claudiu Beznea authored
Instead of trying to match every possible compatible use of_find_matching_node_and_match() and pass the compatible array. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Martin Blumenstingl authored
Call dwc2_debugfs_exit() and dwc2_hcd_remove() (if the HCD was enabled earlier) when usb_add_gadget_udc() has failed. This ensures that the debugfs entries created by dwc2_debugfs_init() as well as the HCD are cleaned up in the error path. Fixes: 207324a3 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Thinh Nguyen authored
The user may have more information to override the HW parameter to specify the maximum_speed. However, if the user specifies a maximum_speed that the controller doesn't support, print out a warning. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Thinh Nguyen authored
If the maximum_speed is not specified, default the device speed base on its HW capability. Don't prematurely check HW capability before validating the maximum_speed device property. The device property takes precedence in dwc->maximum_speed. Fixes: 0e1e5c47 ("usb: dwc3: add support for USB 2.0-only core configuration") Reported-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Nathan Chancellor authored
When booting up on a Raspberry Pi 4 with Control Flow Integrity checking enabled, the following warning/panic happens: [ 1.626435] CFI failure (target: dwc2_set_bcm_params+0x0/0x4): [ 1.632408] WARNING: CPU: 0 PID: 32 at kernel/cfi.c:30 __cfi_check_fail+0x54/0x5c [ 1.640021] Modules linked in: [ 1.643137] CPU: 0 PID: 32 Comm: kworker/0:1 Not tainted 5.8.0-rc6-next-20200724-00051-g89ba619726de #1 [ 1.652693] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT) [ 1.658637] Workqueue: events deferred_probe_work_func [ 1.663870] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 1.669542] pc : __cfi_check_fail+0x54/0x5c [ 1.673798] lr : __cfi_check_fail+0x54/0x5c [ 1.678050] sp : ffff8000102bbaa0 [ 1.681419] x29: ffff8000102bbaa0 x28: ffffab09e21c7000 [ 1.686829] x27: 0000000000000402 x26: ffff0000f6e7c228 [ 1.692238] x25: 00000000fb7cdb0d x24: 0000000000000005 [ 1.697647] x23: ffffab09e2515000 x22: ffffab09e069a000 [ 1.703055] x21: 4c550309df1cf4c1 x20: ffffab09e2433c60 [ 1.708462] x19: ffffab09e160dc50 x18: ffff0000f6e8cc78 [ 1.713870] x17: 0000000000000041 x16: ffffab09e0bce6f8 [ 1.719278] x15: ffffab09e1c819b7 x14: 0000000000000003 [ 1.724686] x13: 00000000ffffefff x12: 0000000000000000 [ 1.730094] x11: 0000000000000000 x10: 00000000ffffffff [ 1.735501] x9 : c932f7abfc4bc600 x8 : c932f7abfc4bc600 [ 1.740910] x7 : 077207610770075f x6 : ffff0000f6c38f00 [ 1.746317] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.751723] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.757129] x1 : ffff8000102bb7d8 x0 : 0000000000000032 [ 1.762539] Call trace: [ 1.765030] __cfi_check_fail+0x54/0x5c [ 1.768938] __cfi_check+0x5fa6c/0x66afc [ 1.772932] dwc2_init_params+0xd74/0xd78 [ 1.777012] dwc2_driver_probe+0x484/0x6ec [ 1.781180] platform_drv_probe+0xb4/0x100 [ 1.785350] really_probe+0x228/0x63c [ 1.789076] driver_probe_device+0x80/0xc0 [ 1.793247] __device_attach_driver+0x114/0x160 [ 1.797857] bus_for_each_drv+0xa8/0x128 [ 1.801851] __device_attach.llvm.14901095709067289134+0xc0/0x170 [ 1.808050] bus_probe_device+0x44/0x100 [ 1.812044] deferred_probe_work_func+0x78/0xb8 [ 1.816656] process_one_work+0x204/0x3c4 [ 1.820736] worker_thread+0x2f0/0x4c4 [ 1.824552] kthread+0x174/0x184 [ 1.827837] ret_from_fork+0x10/0x18 CFI validates that all indirect calls go to a function with the same exact function pointer prototype. In this case, dwc2_set_bcm_params is the target, which has a parameter of type 'struct dwc2_hsotg *', but it is being implicitly cast to have a parameter of type 'void *' because that is the set_params function pointer prototype. Make the function pointer protoype match the definitions so that there is no more violation. Fixes: 7de1debc ("usb: dwc2: Remove platform static params") Link: https://github.com/ClangBuiltLinux/linux/issues/1107Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Mauro Carvalho Chehab authored
This binding driver is needed for Hikey 970 to work, as otherwise a Serror is produced: [ 1.837458] SError Interrupt on CPU0, code 0xbf000002 -- SError [ 1.837462] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205 [ 1.837463] Hardware name: HiKey970 (DT) [ 1.837465] Workqueue: events deferred_probe_work_func [ 1.837467] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 1.837468] pc : _raw_spin_unlock_irqrestore+0x18/0x50 [ 1.837469] lr : regmap_unlock_spinlock+0x14/0x20 [ 1.837470] sp : ffff8000124dba60 [ 1.837471] x29: ffff8000124dba60 x28: 0000000000000000 [ 1.837474] x27: ffff0001b7e854c8 x26: ffff80001204ea18 [ 1.837476] x25: 0000000000000005 x24: ffff800011f918f8 [ 1.837479] x23: ffff800011fbb588 x22: ffff0001b7e40e00 [ 1.837481] x21: 0000000000000100 x20: 0000000000000000 [ 1.837483] x19: ffff0001b767ec00 x18: 00000000ff10c000 [ 1.837485] x17: 0000000000000002 x16: 0000b0740fdb9950 [ 1.837488] x15: ffff8000116c1198 x14: ffffffffffffffff [ 1.837490] x13: 0000000000000030 x12: 0101010101010101 [ 1.837493] x11: 0000000000000020 x10: ffff0001bf17d130 [ 1.837495] x9 : 0000000000000000 x8 : ffff0001b6938080 [ 1.837497] x7 : 0000000000000000 x6 : 000000000000003f [ 1.837500] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.837502] x3 : ffff80001096a880 x2 : 0000000000000000 [ 1.837505] x1 : ffff0001b7e40e00 x0 : 0000000100000001 [ 1.837507] Kernel panic - not syncing: Asynchronous SError Interrupt [ 1.837509] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205 [ 1.837510] Hardware name: HiKey970 (DT) [ 1.837511] Workqueue: events deferred_probe_work_func [ 1.837513] Call trace: [ 1.837514] dump_backtrace+0x0/0x1e0 [ 1.837515] show_stack+0x18/0x24 [ 1.837516] dump_stack+0xc0/0x11c [ 1.837517] panic+0x15c/0x324 [ 1.837518] nmi_panic+0x8c/0x90 [ 1.837519] arm64_serror_panic+0x78/0x84 [ 1.837520] do_serror+0x158/0x15c [ 1.837521] el1_error+0x84/0x100 [ 1.837522] _raw_spin_unlock_irqrestore+0x18/0x50 [ 1.837523] regmap_write+0x58/0x80 [ 1.837524] hi3660_reset_deassert+0x28/0x34 [ 1.837526] reset_control_deassert+0x50/0x260 [ 1.837527] reset_control_deassert+0xf4/0x260 [ 1.837528] dwc3_probe+0x5dc/0xe6c [ 1.837529] platform_drv_probe+0x54/0xb0 [ 1.837530] really_probe+0xe0/0x490 [ 1.837531] driver_probe_device+0xf4/0x160 [ 1.837532] __device_attach_driver+0x8c/0x114 [ 1.837533] bus_for_each_drv+0x78/0xcc [ 1.837534] __device_attach+0x108/0x1a0 [ 1.837535] device_initial_probe+0x14/0x20 [ 1.837537] bus_probe_device+0x98/0xa0 [ 1.837538] deferred_probe_work_func+0x88/0xe0 [ 1.837539] process_one_work+0x1cc/0x350 [ 1.837540] worker_thread+0x2c0/0x470 [ 1.837541] kthread+0x154/0x160 [ 1.837542] ret_from_fork+0x10/0x30 [ 1.837569] SMP: stopping secondary CPUs [ 1.837570] Kernel Offset: 0x1d0000 from 0xffff800010000000 [ 1.837571] PHYS_OFFSET: 0x0 [ 1.837572] CPU features: 0x240002,20882004 [ 1.837573] Memory Limit: none Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Peter Chen authored
The interrupt may occur during the gadget deletion, it fixes the below oops. [ 2394.974604] configfs-gadget gadget: suspend [ 2395.042578] configfs-gadget 5b130000.usb: unregistering UDC driver [g1] [ 2395.382562] irq 229: nobody cared (try booting with the "irqpoll" option) [ 2395.389362] CPU: 0 PID: 301 Comm: kworker/u12:6 Not tainted 5.8.0-rc3-next-20200703-00060-g2f13b83cbf30-dirty #456 [ 2395.399712] Hardware name: Freescale i.MX8QM MEK (DT) [ 2395.404782] Workqueue: 2-0051 tcpm_state_machine_work [ 2395.409832] Call trace: [ 2395.412289] dump_backtrace+0x0/0x1d0 [ 2395.415950] show_stack+0x1c/0x28 [ 2395.419271] dump_stack+0xbc/0x118 [ 2395.422678] __report_bad_irq+0x50/0xe0 [ 2395.426513] note_interrupt+0x2cc/0x38c [ 2395.430355] handle_irq_event_percpu+0x88/0x90 [ 2395.434800] handle_irq_event+0x4c/0xe8 [ 2395.438640] handle_fasteoi_irq+0xbc/0x168 [ 2395.442740] generic_handle_irq+0x34/0x48 [ 2395.446752] __handle_domain_irq+0x68/0xc0 [ 2395.450846] gic_handle_irq+0x64/0x150 [ 2395.454596] el1_irq+0xb8/0x180 [ 2395.457733] __do_softirq+0xac/0x3b8 [ 2395.461310] irq_exit+0xc0/0xe0 [ 2395.464448] __handle_domain_irq+0x6c/0xc0 [ 2395.468540] gic_handle_irq+0x64/0x150 [ 2395.472295] el1_irq+0xb8/0x180 [ 2395.475436] _raw_spin_unlock_irqrestore+0x14/0x48 [ 2395.480232] usb_gadget_disconnect+0x120/0x140 [ 2395.484678] usb_gadget_remove_driver+0xb4/0xd0 [ 2395.489208] usb_del_gadget+0x6c/0xc8 [ 2395.492872] cdns3_gadget_exit+0x5c/0x120 [ 2395.496882] cdns3_role_stop+0x60/0x90 [ 2395.500634] cdns3_role_set+0x64/0xd8 [ 2395.504301] usb_role_switch_set_role.part.0+0x3c/0x90 [ 2395.509444] usb_role_switch_set_role+0x20/0x30 [ 2395.513978] tcpm_mux_set+0x60/0xf8 [ 2395.517470] tcpm_reset_port+0xa4/0xf0 [ 2395.521222] tcpm_detach.part.0+0x44/0x50 [ 2395.525227] tcpm_state_machine_work+0x8b0/0x2360 [ 2395.529932] process_one_work+0x1c8/0x470 [ 2395.533939] worker_thread+0x50/0x420 [ 2395.537603] kthread+0x148/0x168 [ 2395.540830] ret_from_fork+0x10/0x18 [ 2395.544399] handlers: [ 2395.546671] [<000000008dea28da>] cdns3_wakeup_irq [ 2395.551375] [<000000009fee5c61>] cdns3_drd_irq threaded [<000000005148eaec>] cdns3_drd_thread_irq [ 2395.560255] Disabling IRQ #229 [ 2395.563454] configfs-gadget gadget: unbind function 'Mass Storage Function'/000000000132f835 [ 2395.563657] configfs-gadget gadget: unbind [ 2395.563917] udc 5b130000.usb: releasing '5b130000.usb' Fixes: 7733f6c3 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Thinh Nguyen authored
According the programming guide (for all DWC3 IPs), when the driver handles ClearFeature(halt) request, it should issue CLEAR_STALL command _after_ the END_TRANSFER command completes. The END_TRANSFER command may take some time to complete. So, delay the ClearFeature(halt) request control status stage and wait for END_TRANSFER command completion interrupt. Only after END_TRANSFER command completes that the driver may issue CLEAR_STALL command. Cc: stable@vger.kernel.org Fixes: cb11ea56 ("usb: dwc3: gadget: Properly handle ClearFeature(halt)") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
Thinh Nguyen authored
The function driver may queue new requests right after halting the endpoint (i.e. queue new requests while the endpoint is stalled). There's no restriction preventing it from doing so. However, dwc3 currently drops those requests after CLEAR_STALL. The driver should only drop started requests. Keep the pending requests in the pending list to resume and process them after the host issues ClearFeature(Halt) to the endpoint. Cc: stable@vger.kernel.org Fixes: cb11ea56 ("usb: dwc3: gadget: Properly handle ClearFeature(halt)") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
-
- 20 Sep, 2020 20 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull syscall tracing fix from Borislav Petkov: "Fix the seccomp syscall rewriting so that trace and audit see the rewritten syscall number, from Kees Cook" * tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: core/entry: Report syscall correctly for trace and audit
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: "Fix noreturn detection for ignored sibling functions (Josh Poimboeuf)" * tag 'objtool_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix noreturn detection for ignored functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Borislav Petkov: "Two fixes from the locking/urgent pile: - Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter Zijlstra) - Make percpu-rwsem operations on the semaphore's ->read_count IRQ-safe because it can be used in an IRQ context (Hou Tao)" * tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count locking/lockdep: Fix "USED" <- "IN-NMI" inversions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Borislav Petkov: "Ensure that the EFI bootloader control module only probes successfully on systems that support the EFI SetVariable runtime service" [ Tag and commit from Ard Biesheuvel, forwarded by Borislav ] * tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: efibc: check for efivars write capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - A defconfig fix (Daniel Díaz) - Disable relocation relaxation for the compressed kernel when not built as -pie as in that case kernels built with clang and linked with LLD fail to boot due to the linker optimizing some instructions in non-PIE form; the gory details in the commit message (Arvind Sankar) - A fix for the "bad bp value" warning issued by the frame-pointer unwinder (Josh Poimboeuf) * tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/fp: Fix FP unwinding in ret_from_fork x86/boot/compressed: Disable relocation relaxation x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A handful of fixes to address a string of mistakes in the mechanism for device-mapper to determine if its component devices are dax capable. - Fix an original bug in device-mapper table reference counting when interrogating dax capability in the component device. This bug was hidden by the following bug. - Fix device-mapper to use the proper helper (dax_supported() instead of the leaf helper generic_fsdax_supported()) to determine dax operation of a stacked block device configuration. The original implementation is only valid for one level of dax-capable block device stacking. This bug was discovered while fixing the below regression. - Fix an infinite recursion regression introduced by broken attempts to quiet the generic_fsdax_supported() path and make it bail out before logging "dax capability not found" errors" * tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix stack overflow when mounting fsdax pmem device dm: Call proper helper to determine dax support dm/dax: Fix table reference counts
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix for a lockdep issue to avoid an asserting triggering during early boot. There shouldn't be any incorrect behavior as the system isn't concurrent at the time. - The addition of a missing fence when installing early fixmap mappings. - A corretion to the K210 device tree's interrupt map. - A fix for M-mode timer handling on the K210. * tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Resurrect the MMIO timer implementation for M-mode systems riscv: Fix Kendryte K210 device tree riscv: Add sfence.vma after early page table changes RISC-V: Take text_mutex in ftrace_init_nop()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/Thunderbolt fixes from Greg KH: "Here are some small USB and one Thunderbolt driver fixes. Nothing major at all, just some fixes for reported issues, and a quirk addition: - typec fixes - UAS disconnect fix - usblp race fix - ehci-hcd modversions build fix - ignore wakeup quirk table addition - thunderbolt DROM read fix All of these have been in linux-next with no reported issues" * tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usblp: fix race between disconnect() and read() ehci-hcd: Move include to keep CRC stable usb: typec: intel_pmc_mux: Handle SCU IPC error conditions USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook USB: UAS: fix disconnect by unplugging a hub usb: typec: ucsi: Prevent mode overrun usb: typec: ucsi: acpi: Increase command completion timeout value thunderbolt: Retry DROM read once if parsing fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial/fbcon fixes from Greg KH: "Here are some small tty/serial and one more fbcon fix. They include: - serial core locking regression fixes - new device ids for 8250_pci driver - fbcon fix for syzbot found issue All have been in linux-next with no reported issues" * tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fbcon: Fix user font detection test at fbcon_resize(). serial: 8250_pci: Add Realtek 816a and 816b serial: core: fix console port-lock regression serial: core: fix port-lock initialisation
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: "Two fixes for resulting from CONFIG_DEBUG_TEST_DRIVER_REMOVE=y experiments: - complete a previous fix to reset a local structure containing scanned system data properly so that the driver rescans, as it should, on a second load. - address a refcount underflow due to not paying attention to the driver whitelest on unregister" * tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Check whether the driver is on the safe list correctly EDAC/ghes: Clear scanned data on unload
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Just a couple of driver quirks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: trackpoint - add new trackpoint variant IDs Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists
-
Linus Torvalds authored
Sedat Dilek pointed out some silly comment typo issues. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: "Fix qconf warnings and revive help message" * tag 'kbuild-fixes-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: qconf: revive help message in the info view kconfig: qconf: fix incomplete type 'struct gstr' warning kconfig: qconf: use delete[] instead of delete to free array (again)
-
Adrian Huang authored
When mounting fsdax pmem device, commit 6180bb44 ("dax: fix detection of dax support for non-persistent memory block devices") introduces the stack overflow [1][2]. Here is the call path for mounting ext4 file system: ext4_fill_super bdev_dax_supported __bdev_dax_supported dax_supported generic_fsdax_supported __generic_fsdax_supported bdev_dax_supported The call path leads to the infinite calling loop, so we cannot call bdev_dax_supported() in __generic_fsdax_supported(). The sanity checking of the variable 'dax_dev' is moved prior to the two bdev_dax_pgoff() checks [3][4]. [1] https://lore.kernel.org/linux-nvdimm/1420999447.1004543.1600055488770.JavaMail.zimbra@redhat.com/ [2] https://lore.kernel.org/linux-nvdimm/alpine.LRH.2.02.2009141131220.30651@file01.intranet.prod.int.rdu2.redhat.com/ [3] https://lore.kernel.org/linux-nvdimm/CA+RJvhxBHriCuJhm-D8NvJRe3h2MLM+ZMFgjeJjrRPerMRLvdg@mail.gmail.com/ [4] https://lore.kernel.org/linux-nvdimm/20200903160608.GU878166@iweiny-DESK2.sc.intel.com/ Fixes: 6180bb44 ("dax: fix detection of dax support for non-persistent memory block devices") Reported-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> Cc: Coly Li <colyli@suse.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: John Pittman <jpittman@redhat.com> Link: https://lore.kernel.org/r/20200917111549.6367-1-adrianhuang0701@gmail.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jan Kara authored
DM was calling generic_fsdax_supported() to determine whether a device referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that they don't have to duplicate common generic checks. High level code should call dax_supported() helper which that calls into appropriate helper for the particular device. This problem manifested itself as kernel messages: dm-3: error: dax access failed (-95) when lvm2-testsuite run in cases where a DM device was stacked on top of another DM device. Fixes: 7bf7eac8 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mike Snitzer <snitzer@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
A recent fix to the dm_dax_supported() flow uncovered a latent bug. When dm_get_live_table() fails it is still required to drop the srcu_read_lock(). Without this change the lvm2 test-suite triggers this warning: # lvm2-testsuite --only pvmove-abort-all.sh WARNING: lock held when returning to user space! 5.9.0-rc5+ #251 Tainted: G OE ------------------------------------------------ lvm/1318 is leaving the kernel with locks still held! 1 lock held by lvm/1318: #0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod] ...and later on this hang signature: INFO: task lvm:1344 blocked for more than 122 seconds. Tainted: G OE 5.9.0-rc5+ #251 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:lvm state:D stack: 0 pid: 1344 ppid: 1 flags:0x00004000 Call Trace: __schedule+0x45f/0xa80 ? finish_task_switch+0x249/0x2c0 ? wait_for_completion+0x86/0x110 schedule+0x5f/0xd0 schedule_timeout+0x212/0x2a0 ? __schedule+0x467/0xa80 ? wait_for_completion+0x86/0x110 wait_for_completion+0xb0/0x110 __synchronize_srcu+0xd1/0x160 ? __bpf_trace_rcu_utilization+0x10/0x10 __dm_suspend+0x6d/0x210 [dm_mod] dm_suspend+0xf6/0x140 [dm_mod] Fixes: 7bf7eac8 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Reported-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
-
Masahiro Yamada authored
Since commit 68fd110b ("kconfig: qconf: remove redundant help in the info view"), the help message is no longer displayed. I intended to drop duplicated "Symbol:", "Type:", but precious info about help and reverse dependencies was lost too. Revive it now. "defined at" is contained in menu_get_ext_help(), so I made sure to not display it twice. Fixes: 68fd110b ("kconfig: qconf: remove redundant help in the info view") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
"make HOSTCXX=clang++ xconfig" reports the following: HOSTCXX scripts/kconfig/qconf.o In file included from scripts/kconfig/qconf.cc:23: In file included from scripts/kconfig/lkc.h:15: scripts/kconfig/lkc_proto.h:26:13: warning: 'get_relations_str' has C-linkage specified, but returns incomplete type 'struct gstr' which could be incompatible with C [-Wreturn-type-c-linkage] struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head); ^ Currently, get_relations_str() is declared before the struct gstr definition. Move all declarations of menu.c functions below. BTW, some are declared in lkc.h and some in lkc_proto.h, but the difference is unclear. I guess some refactoring is needed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Boris Kolpackov <boris@codesynthesis.com>
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "15 patches. Subsystems affected by this patch series: mailmap, mm/hotfixes, mm/thp, mm/memory-hotplug, misc, kcsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments' fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype stackleak: let stack_erasing_sysctl take a kernel pointer buffer ftrace: let ftrace_enable_sysctl take a kernel pointer buffer mm/memory_hotplug: drain per-cpu pages again during memory offline selftests/vm: fix display of page size in map_hugetlb mm/thp: fix __split_huge_pmd_locked() for migration PMD kprobes: fix kill kprobe which has been marked as gone tmpfs: restore functionality of nr_inodes=0 mlock: fix unevictable_pgs event counts on THP mm: fix check_move_unevictable_pages() on THP mm: migration of hugetlbfs page skip memcg ksm: reinstate memcg charge on copied pages mailmap: add older email addresses for Kees Cook
-
- 19 Sep, 2020 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Another bunch of fixes for I2C. Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it will make dependency handling much easier if those two go together" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK i2c: mediatek: Send i2c master code at more than 1MHz i2c: mediatek: Fix generic definitions for bus frequency i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices() i2c: i801: Simplify the suspend callback i2c: i801: Fix resume bug i2c: aspeed: Mask IRQ status to relevant bits
-
Palmer Dabbelt authored
The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs in the NOMMU systems that means we can't use rdtime. The K210 is the only system that anyone is currently running NOMMU or M-mode on, so here we're just inlining the timer read directly. This also adds the CLINT driver as an !MMU dependency, as it's currently the only timer driver availiable for these systems and without it we get a build failure for some configurations. Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-