- 03 Feb, 2023 12 commits
-
-
Laurent Pinchart authored
Move the control update code to a separate function to group it with all the control-related code and make imx290_set_fmt() more readable. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Laurent Pinchart authored
The probe() function is large. Make it more readable by factoring the subdev initialization code out. While at it, rename the error labels as the "free_" prefix isn't accurate. No functional change intended. Signed-off-by:
-
Laurent Pinchart authored
Move functions around to group them in logical sections, in order to improve readability. As a result, the IMX290_NUM_SUPPLIES macro has to be changed. No other code change is included, only moves. Signed-off-by:
-
Guoniu.zhou authored
In commit a89f14bb ("media: ov5640: Split DVP and CSI-2 formats"), it splits format list for DVP and CSI-2 mode, but the default format defined in commit 90b0f355 ("media: ov5640: Implement init_cfg") is only supported by DVP mode, so define a new default format for CSI-2 mode. Signed-off-by:
Guoniu.zhou <guoniu.zhou@nxp.com> Reviewed-by:
Jai Luthra <j-luthra@ti.com> Reviewed-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
-
Adam Ford authored
The imx219 camera is capable of either two-lane or four-lane operation. When operating in four-lane, both the pixel rate and link frequency change. Regardless of the mode, however, both frequencies remain fixed. Helper functions are needed to read and set pixel and link frequencies which also reduces the number of fixed registers in the table of modes. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Adam Ford authored
There are four modes, and each mode has a table of registers. Some of the registers are common to all modes, so create new tables for these common registers to reduce duplicate code. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Marco Felsch authored
Using the u64 v4l2_dbg_register.val directly can lead to unexpected results depending on machine endianness. Fix this by using a local variable which is assigned afterwards. Since tc358746_read() will init the val variable to 0 we can assing it without checking the return value first. Addresses-Coverity-ID: 1527256 ("Integer handling issues") Reported-by:coverity-bot <keescook+coverity-bot@chromium.org> Fixes: 80a21da3 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Marco Felsch authored
Currently we ignore the return value of tc358746_read() and return alawys return 0 which is wrong. Fix this by returning the actual return value of the read operation which is either 0 on success or an error value. Addresses-Coverity-ID: 1527254 ("Error handling issues") Reported-by: -
Marco Felsch authored
It was intended to return an error if tc358746_update_bits() call fail. Fix this by storing the return code. Addresses-Coverity-ID: 1527252 ("Control flow issues") Reported-by: -
Shang XiaoJing authored
There is a kmemleak when testing the media/i2c/ov5675.c with bpf mock device: AssertionError: unreferenced object 0xffff888107362160 (size 16): comm "python3", pid 277, jiffies 4294832798 (age 20.722s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000abe7d67c>] __kmalloc_node+0x44/0x1b0 [<000000008a725aac>] kvmalloc_node+0x34/0x180 [<000000009a53cd11>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev] [<0000000055b46db0>] ov5675_probe+0x38b/0x897 [ov5675] [<00000000153d886c>] i2c_device_probe+0x28d/0x680 [<000000004afb7e8f>] really_probe+0x17c/0x3f0 [<00000000ff2f18e4>] __driver_probe_device+0xe3/0x170 [<000000000a001029>] driver_probe_device+0x49/0x120 [<00000000e39743c7>] __device_attach_driver+0xf7/0x150 [<00000000d32fd070>] bus_for_each_drv+0x114/0x180 [<000000009083ac41>] __device_attach+0x1e5/0x2d0 [<0000000015b4a830>] bus_probe_device+0x126/0x140 [<000000007813deaf>] device_add+0x810/0x1130 [<000000007becb867>] i2c_new_client_device+0x386/0x540 [<000000007f9cf4b4>] of_i2c_register_device+0xf1/0x110 [<00000000ebfdd032>] of_i2c_notify+0xfc/0x1f0 ov5675_init_controls() won't clean all the allocated resources in fail path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to prevent memleak. Fixes: bf27502b ("media: ov5675: Add support for OV5675 sensor") Signed-off-by:Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by:
-
Shang XiaoJing authored
There is a kmemleak when testing the media/i2c/ov2740.c with bpf mock device: unreferenced object 0xffff8881090e19e0 (size 16): comm "51-i2c-ov2740", pid 278, jiffies 4294781584 (age 23.613s) hex dump (first 16 bytes): 00 f3 7c 0b 81 88 ff ff 80 75 6a 09 81 88 ff ff ..|......uj..... backtrace: [<000000004e9fad8f>] __kmalloc_node+0x44/0x1b0 [<0000000039c802f4>] kvmalloc_node+0x34/0x180 [<000000009b8b5c63>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev] [<0000000038644056>] ov2740_probe+0x37d/0x84f [ov2740] [<0000000092489f59>] i2c_device_probe+0x28d/0x680 [<000000001038babe>] really_probe+0x17c/0x3f0 [<0000000098c7af1c>] __driver_probe_device+0xe3/0x170 [<00000000e1b3dc24>] device_driver_attach+0x34/0x80 [<000000005a04a34d>] bind_store+0x10b/0x1a0 [<00000000ce25d4f2>] drv_attr_store+0x49/0x70 [<000000007d9f4e9a>] sysfs_kf_write+0x8c/0xb0 [<00000000be6cff0f>] kernfs_fop_write_iter+0x216/0x2e0 [<0000000031ddb40a>] vfs_write+0x658/0x810 [<0000000041beecdd>] ksys_write+0xd6/0x1b0 [<0000000023755840>] do_syscall_64+0x38/0x90 [<00000000b2cc2da2>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ov2740_init_controls() won't clean all the allocated resources in fail path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to prevent memleak. Fixes: 866edc89 ("media: i2c: Add ov2740 image sensor driver") Signed-off-by: -
Shang XiaoJing authored
There is a kmemleak when testing the media/i2c/max9286.c with bpf mock device: kmemleak: 5 new suspected memory leaks (see /sys/kernel/debug/kmemleak) unreferenced object 0xffff88810defc400 (size 256): comm "python3", pid 278, jiffies 4294737563 (age 31.978s) hex dump (first 32 bytes): 28 06 a7 0a 81 88 ff ff 00 fe 22 12 81 88 ff ff (........."..... 10 c4 ef 0d 81 88 ff ff 10 c4 ef 0d 81 88 ff ff ................ backtrace: [<00000000191de6a7>] __kmalloc_node+0x44/0x1b0 [<000000002f4912b7>] kvmalloc_node+0x34/0x180 [<0000000057dc4cae>] v4l2_ctrl_new+0x325/0x10f0 [videodev] [<0000000026030272>] v4l2_ctrl_new_std+0x16f/0x210 [videodev] [<00000000f0d9ea2f>] max9286_probe+0x76e/0xbff [max9286] [<00000000ea8f6455>] i2c_device_probe+0x28d/0x680 [<0000000087529af3>] really_probe+0x17c/0x3f0 [<00000000b08be526>] __driver_probe_device+0xe3/0x170 [<000000004382edea>] driver_probe_device+0x49/0x120 [<000000007bde528a>] __device_attach_driver+0xf7/0x150 [<000000009f9c6ab4>] bus_for_each_drv+0x114/0x180 [<00000000c8aaf588>] __device_attach+0x1e5/0x2d0 [<0000000041cc06b9>] bus_probe_device+0x126/0x140 [<000000002309860d>] device_add+0x810/0x1130 [<000000002827bf98>] i2c_new_client_device+0x359/0x4f0 [<00000000593bdc85>] of_i2c_register_device+0xf1/0x110 max9286_v4l2_register() calls v4l2_ctrl_new_std(), but won't free the created v412_ctrl when fwnode_graph_get_endpoint_by_id() failed, which causes the memleak. Call v4l2_ctrl_handler_free() to free the v412_ctrl. Fixes: 66d8c9d2 ("media: i2c: Add MAX9286 driver") Signed-off-by:
-
- 22 Jan, 2023 28 commits
-
-
Hans Verkuil authored
The tm6000 driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
The vpfe_capture drivers do not use the vb2 framework for streaming video, instead they use the old vb1 framework and nobody stepped in to convert these drivers to vb2. The hardware is very old, so the decision was made to remove them altogether since we want to get rid of the old vb1 framework. Signed-off-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The zr364xx driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by:
-
Hans Verkuil authored
The stkwebcam driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by:
-
Hans Verkuil authored
The fsl-viu driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by:
-
Hans Verkuil authored
The cpia2 driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by:
-
Hans Verkuil authored
The meye driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by:
-
Sakari Ailus authored
Document how streams interacts with formats and selections. Update documentation in respect to what is allowed, in particular streams are only supported via full routes, source-only routes are not supported right now. The centerpiece of the API additions are streams. Albeit routes are configured via S_ROUTING IOCTL that also declares streams, it is streams that are accessed through other APIs. Thus refer to streams instead of routes in documentation. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
The stream field identifies the stream this frame descriptor applies to in routing configuration across a multiplexed link. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Laurent Pinchart authored
The v4l2_subdev_s_stream_helper() helper can be used by subdevs that implement the stream-aware .enable_streams() and .disable_streams() operations to implement .s_stream(). This is limited to subdevs that have a single source pad. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Laurent Pinchart authored
Add two new subdev pad operations, .enable_streams() and .disable_streams(), to allow control of individual streams per pad. This is a superset of what the video .s_stream() operation implements. To help with handling of backward compatibility, add two wrapper functions around those operations, and require their usage in drivers. Signed-off-by:
-
Laurent Pinchart authored
Add a helper function to translate streams between two pads of a subdev, using the subdev's internal routing table. Signed-off-by:
-
Laurent Pinchart authored
Add a v4l2_subdev_routing_validate() helper for verifying routing for common cases like only allowing non-overlapping 1-to-1 streams. Signed-off-by:
-
Tomi Valkeinen authored
v4l2_subdev_set_routing_with_fmt() is the same as v4l2_subdev_set_routing(), but additionally initializes all the streams with the given format. Signed-off-by:
-
Tomi Valkeinen authored
Add streams support to v4l2_subdev_get_fmt() helper function. Subdev drivers that do not need to do anything special in their get_fmt op can use this helper directly for v4l2_subdev_pad_ops.get_fmt. Signed-off-by:
-
Tomi Valkeinen authored
Add two helper functions to make dealing with streams easier: v4l2_subdev_routing_find_opposite_end - given a routing table and a pad + stream, return the pad + stream on the opposite side of the subdev. v4l2_subdev_state_get_opposite_stream_format - return a pointer to the format on the pad + stream on the opposite side from the given pad + stream. Signed-off-by:
-
Tomi Valkeinen authored
Update v4l2_subdev_link_validate() to use routing and streams for validation. Instead of just looking at the format on the pad on both ends of the link, the routing tables are used to collect all the streams going from the source to the sink over the link, and the streams' formats on both ends of the link are verified. Signed-off-by:
-
Tomi Valkeinen authored
Add support to manage configurations (format, crop, compose) per stream, instead of per pad. This is accomplished with data structures that hold an array of all subdev's stream configurations. The number of streams can vary at runtime based on routing. Every time the routing is changed, the stream configurations need to be re-initialized. Signed-off-by:
-
Tomi Valkeinen authored
Add documentation related to multiplexed streams. Signed-off-by:
-
Jacopo Mondi authored
Add a for_each_active_route() macro to replace the repeated pattern of iterating on the active routes of a routing table. Signed-off-by:
-
Tomi Valkeinen authored
Add a helper function to set the subdev routing. The helper can be used from subdev driver's set_routing op to store the routing table. Signed-off-by:
-
Tomi Valkeinen authored
Add a v4l2_subdev_has_pad_interdep() helper function which can be used for media_entity_operations.has_pad_interdep op. It considers two pads interdependent if there is an active route between pad0 and pad1. Signed-off-by:
-
Tomi Valkeinen authored
The Streams API is an experimental feature. To use the Streams API, the user needs to change a variable in v4l2-subdev.c and recompile the kernel. This commit should be reverted when the Streams API is deemed ready for production use. Signed-off-by:
-
Laurent Pinchart authored
Add support for subdev internal routing. A route is defined as a single stream from a sink pad to a source pad. The userspace can configure the routing via two new ioctls, VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING, and subdevs can implement the functionality with v4l2_subdev_pad_ops.set_routing(). - Add sink and source streams for multiplexed links - Copy the argument back in case of an error. This is needed to let the caller know the number of routes. - Expand and refine documentation. - Make the 'routes' pointer a __u64 __user pointer so that a compat32 version of the ioctl is not required. - Add struct v4l2_subdev_krouting to be used for subdevice operations. - Fix typecasing warnings - Check sink & source pad types - Add 'which' field - Routing to subdev state - Dropped get_routing subdev op Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Jacopo Mondi authored
Add documentation for VIDIOC_SUBDEV_G/S_ROUTING ioctl and add description of multiplexed media pads and internal routing to the V4L2-subdev documentation section. Signed-off-by:
-
Tomi Valkeinen authored
Add a subdev capability flag to expose to userspace if a subdev supports multiplexed streams. Signed-off-by:
-
Tomi Valkeinen authored
Add subdev flag V4L2_SUBDEV_FL_STREAMS. It is used to indicate that the subdev supports the new API with multiplexed streams (routing, stream configs). Signed-off-by:
-
Tomi Valkeinen authored
Sort the includes alphabetically. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
