- 06 Nov, 2019 21 commits
-
-
Pawan Gupta authored
commit c2955f27 upstream Transactional Synchronization Extensions (TSX) may be used on certain processors as part of a speculative side channel attack. A microcode update for existing processors that are vulnerable to this attack will add a new MSR - IA32_TSX_CTRL to allow the system administrator the option to disable TSX as one of the possible mitigations. The CPUs which get this new MSR after a microcode upgrade are the ones which do not set MSR_IA32_ARCH_CAPABILITIES.MDS_NO (bit 5) because those CPUs have CPUID.MD_CLEAR, i.e., the VERW implementation which clears all CPU buffers takes care of the TAA case as well. [ Note that future processors that are not vulnerable will also support the IA32_TSX_CTRL MSR. ] Add defines for the new IA32_TSX_CTRL MSR and its bits. TSX has two sub-features: 1. Restricted Transactional Memory (RTM) is an explicitly-used feature where new instructions begin and end TSX transactions. 2. Hardware Lock Elision (HLE) is implicitly used when certain kinds of "old" style locks are used by software. Bit 7 of the IA32_ARCH_CAPABILITIES indicates the presence of the IA32_TSX_CTRL MSR. There are two control bits in IA32_TSX_CTRL MSR: Bit 0: When set, it disables the Restricted Transactional Memory (RTM) sub-feature of TSX (will force all transactions to abort on the XBEGIN instruction). Bit 1: When set, it disables the enumeration of the RTM and HLE feature (i.e. it will make CPUID(EAX=7).EBX{bit4} and CPUID(EAX=7).EBX{bit11} read as 0). The other TSX sub-feature, Hardware Lock Elision (HLE), is unconditionally disabled by the new microcode but still enumerated as present by CPUID(EAX=7).EBX{bit4}, unless disabled by IA32_TSX_CTRL_MSR[1] - TSX_CTRL_CPUID_CLEAR. Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Neelima Krishnan <neelima.krishnan@intel.com> Reviewed-by:
Mark Gross <mgross@linux.intel.com> Reviewed-by:
Tony Luck <tony.luck@intel.com> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> CVE-2019-11135 Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Paolo Bonzini authored
Similar to AMD bits, set the Intel bits from the vendor-independent feature and bug flags, because KVM_GET_SUPPORTED_CPUID does not care about the vendor and they should be set on AMD processors as well. Suggested-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> CVE-2019-11135 (backported from commit 0c54914d) Signed-off-by:
-
Sean Christopherson authored
The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES regardless of hardware support under the pretense that KVM fully emulates MSR_IA32_ARCH_CAPABILITIES. Unfortunately, only VMX hosts handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts). Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so that it's emulated on AMD hosts. Fixes: 1eaafe91 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported") Cc: stable@vger.kernel.org Reported-by:
Xiaoyao Li <xiaoyao.li@linux.intel.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Imre Deak authored
In some circumstances the RC6 context can get corrupted. We can detect this and take the required action, that is disable RC6 and runtime PM. The HW recovers from the corrupted state after a system suspend/resume cycle, so detect the recovery and re-enable RC6 and runtime PM. v2: rebase (Mika) v3: - Move intel_suspend_gt_powersave() to the end of the GEM suspend sequence. - Add commit message. v4: - Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API change. v5: - Rebased on latest upstream gt_pm refactoring. Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> CVE-2019-0154 Signed-off-by:
-
Imre Deak authored
In some circumstances the RC6 context can get corrupted. We can detect this and take the required action, that is disable RC6 and runtime PM. The HW recovers from the corrupted state after a system suspend/resume cycle, so detect the recovery and re-enable RC6 and runtime PM. v2: rebase (Mika) v3: - Move intel_suspend_gt_powersave() to the end of the GEM suspend sequence. - Add commit message. v4: - Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API change. v5: - Rebased on latest upstream gt_pm refactoring. Signed-off-by:
Timo Aaltonen <timo.aaltonen@canonical.com> Signed-off-by:
-
Uma Shankar authored
In BXT/APL, device 2 MMIO reads from MIPI controller requires its PLL to be turned ON. When MIPI PLL is turned off (MIPI Display is not active or connected), and someone (host or GT engine) tries to read MIPI registers, it causes hard hang. This is a hardware restriction or limitation. Driver by itself doesn't read MIPI registers when MIPI display is off. But any userspace application can submit unprivileged batch buffer for execution. In that batch buffer there can be mmio reads. And these reads are allowed even for unprivileged applications. If these register reads are for MIPI DSI controller and MIPI display is not active during that time, then the MMIO read operation causes system hard hang and only way to recover is hard reboot. A genuine process/application won't submit batch buffer like this and doesn't cause any issue. But on a compromised system, a malign userspace process/app can generate such batch buffer and can trigger system hard hang (denial of service attack). The fix is to lower the internal MMIO timeout value to an optimum value of 950us as recommended by hardware team. If the timeout is beyond 1ms (which will hit for any value we choose if MMIO READ on a DSI specific register is performed without PLL ON), it causes the system hang. But if the timeout value is lower than it will be below the threshold (even if timeout happens) and system will not get into a hung state. This will avoid a system hang without losing any programming or GT interrupts, taking the worst case of lowest CDCLK frequency and early DC5 abort into account. Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Jon Bloomfield <jon.bloomfield@intel.com> CVE-2019-0154 [tjaalton: backport to i915_bpo - Use type safe register definitions.] Signed-off-by:
-
Jon Bloomfield authored
Some of the gen instruction macros (e.g. MI_DISPLAY_FLIP) have the length directly encoded in them. Since these are used directly in the tables, the Length becomes part of the comparison used for matching during parsing. Thus, if the cmd being parsed has a different length to that in the table, it is not matched and the cmd is accepted via the default variable length path. Fix by masking out everything except the Opcode in the cmd tables Signed-off-by:
-
Jon Bloomfield authored
To keep things manageable, the pre-gen9 cmdparser does not attempt to track any form of nested BB_START's. This did not prevent usermode from using nested starts, or even chained batches because the cmdparser is not strictly enforced pre gen9. Instead, the existence of a nested BB_START would cause the batch to be emitted in insecure mode, and any privileged capabilities would not be available. For Gen9, the cmdparser becomes mandatory (for BCS at least), and so not providing any form of nested BB_START support becomes overly restrictive. Any such batch will simply not run. We make heavy use of backward jumps in igt, and it is much easier to add support for this restricted subset of nested jumps, than to rewrite the whole of our test suite to avoid them. Add the required logic to support limited backward jumps, to instructions that have already been validated by the parser. Note that it's not sufficient to simply approve any BB_START that jumps backwards in the buffer because this would allow an attacker to embed a rogue instruction sequence within the operand words of a harmless instruction (say LRI) and jump to that. We introduce a bit array to track every instr offset successfully validated, and test the target of BB_START against this. If the target offset hits, it is re-written to the same offset in the shadow buffer and the BB_START cmd is allowed. Note: This patch deliberately ignores checkpatch issues in the cmdtables, in order to match the style of the surrounding code. We'll correct the entire file in one go in a later patch. v2: set dispatch secure late (Mika) v3: rebase (Mika) v4: Clear whitelist on each parse Minor review updates (Chris) v5: Correct backward jump batching v6: fix compilation error due to struct eb shuffle (Mika) Signed-off-by:
-
Jon Bloomfield authored
For gen9 we enable cmdparsing on the BCS ring, specifically to catch inadvertent accesses to sensitive registers Unlike gen7/hsw, we use the parser only to block certain registers. We can rely on h/w to block restricted commands, so the command tables only provide enough info to allow the parser to delineate each command, and identify commands that access registers. Note: This patch deliberately ignores checkpatch issues in favour of matching the style of the surrounding code. We'll correct the entire file in one go in a later patch. Signed-off-by:
-
Jon Bloomfield authored
In "drm/i915: Add support for mandatory cmdparsing" we introduced the concept of mandatory parsing. This allows the cmdparser to be invoked even when user passes batch_len=0 to the execbuf ioctl's. However, the cmdparser needs to know the extents of the buffer being scanned. Refactor the code to ensure the cmdparser uses the actual object size, instead of the incoming length, if user passes 0. Signed-off-by:
-
Jon Bloomfield authored
For Gen7, the original cmdparser motive was to permit limited use of register read/write instructions in unprivileged BB's. This worked by copying the user supplied bb to a kmd owned bb, and running it in secure mode, from the ggtt, only if the scanner finds no unsafe commands or registers. For Gen8+ we can't use this same technique because running bb's from the ggtt also disables access to ppgtt space. But we also do not actually require 'secure' execution since we are only trying to reduce the available command/register set. Instead we will copy the user buffer to a kmd owned read-only bb in ppgtt, and run in the usual non-secure mode. Note that ro pages are only supported by ppgtt (not ggtt), but luckily that's exactly what we need. Add the required paths to map the shadow buffer to ppgtt ro for Gen8+ Signed-off-by:
-
Jon Bloomfield authored
The existing cmdparser for gen7 can be bypassed by specifying batch_len=0 in the execbuf call. This is safe because bypassing simply reduces the cmd-set available. In a later patch we will introduce cmdparsing for gen9, as a security measure, which must be strictly enforced since without it we are vulnerable to DoS attacks. Introduce the concept of 'required' cmd parsing that cannot be bypassed by submitting zero-length bb's. Signed-off-by:
-
Jon Bloomfield authored
The previous patch has killed support for secure batches on gen6+, and hence the cmdparsers master tables are now dead code. Remove them. Signed-off-by:
-
Michal Srb authored
The find_reg function was assuming that there is always at least one table in reg_tables. It is not always true. In case of VCS or VECS, the reg_tables is NULL and reg_table_count is 0, implying that no register-accessing commands are allowed. However, the command tables include commands such as MI_STORE_REGISTER_MEM. When trying to check such command, the find_reg would dereference NULL pointer. Now it will just return NULL meaning that the register was not found and the command will be rejected. Fixes: 76ff480e ("drm/i915/cmdparser: Use binary search for faster register lookup") Signed-off-by:
Michal Srb <msrb@suse.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205142916.27092-2-msrb@suse.com Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
A significant proportion of the cmdparsing time for some batches is the cost to find the register in the mmiotable. We ensure that those tables are in ascending order such that we could do a binary search if it was ever merited. It is. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-38-chris@chris-wilson.co.uk CVE-2019-0155 (cherry picked from commit 76ff480e) Signed-off-by:
-
Jon Bloomfield authored
Retroactively stop reporting support for secure batches through the api for gen6+ so that older binaries trigger the fallback path instead. Older binaries use secure batches pre gen6 to access resources that are not available to normal usermode processes. However, all known userspace explicitly checks for HAS_SECURE_BATCHES before relying on the secure batch feature. Since there are no known binaries relying on this for newer gens we can kill secure batches from gen6, via I915_PARAM_HAS_SECURE_BATCHES. Signed-off-by:
-
Jon Bloomfield authored
We're about to introduce some new tables for later gens, and the current naming for the gen7 tables will no longer make sense. Signed-off-by:
-
Chris Wilson authored
GVT is not propagating the PTE bits, and is always setting the read-write bit, thus breaking read-only support. Signed-off-by:
-
Jon Bloomfield authored
Hook up the flags to allow read-only ppGTT mappings for gen8+ v2: Include a selftest to check that writes to a readonly PTE are dropped v3: Don't duplicate cpu_check() as we can just reuse it, and even worse don't wholesale copy the theory-of-operation comment from igt_ctx_exec without changing it to explain the intention behind the new test! v4: Joonas really likes magic mystery values Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-2-chris@chris-wilson.co.uk (backported from commit 250f8c81) CVE-2019-0155 [tjaalton: backport to i915_bpo - ggtt_vm doesn't exist, use ggtt->base - dev_priv doesn't have gtt, use ggtt instead] Signed-off-by:
-
Jon Bloomfield authored
We can set a bit inside the ppGTT PTE to indicate a page is read-only; writes from the GPU will be discarded. We can use this to protect pages and in particular support read-only userptr mappings (necessary for importing PROT_READ vma). Signed-off-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 21 Oct, 2019 19 commits
-
-
Khalid Elmously authored
Signed-off-by:Khalid Elmously <khalid.elmously@canonical.com>
-
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1848780 This driver was removed in Ubuntu commit 74fb80c7f1b7 ("USB: rio500: Remove Rio 500 kernel driver"). Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
-
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1849051 Properties: no-test-build Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by: -
Tyler Hicks authored
Nicolas Waisman noticed that even though noa_len is checked for a compatible length it's still possible to overrun the buffers of p2pinfo since there's no check on the upper bound of noa_num. Bounds check noa_num against P2P_MAX_NOA_NUM using the minimum of the two. CVE-2019-17666 Reported-by:
Nicolas Waisman <nico@semmle.com> Suggested-by:
Ping-Ke Shih <pkshih@realtek.com> [tyhicks: Reuse nearly all of a commit message written by Laura Abbott] Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1848780Signed-off-by:
-
Janakarajan Natarajan authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 454de1e7 upstream. As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf. Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0. This hasn't had any implications so far because setting reserved bits in EAX is simply ignored by the CPU. [ bp: Fixup comment in delay_mwaitx() and massage. ] Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 194c2c74 upstream. As instances may have different tracers available, we need to look at the trace_array descriptor that shows the list of the available tracers for the instance. But there's a race between opening the file and an admin deleting the instance. The trace_array_get() needs to be called before accessing the trace_array. Cc: stable@vger.kernel.org Fixes: 607e2ea1 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 30045f21 upstream. Since commit c2b71462 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Note that runtime PM has never actually been enabled for this driver since the support_autosuspend flag in its usb_driver struct is not set. Fixes: c2b71462 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Acked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191001084908.2003-5-johan@kernel.orgSigned-off-by:
-
Pavel Shilovsky authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit c82e5ac7 ] Currently the client indicates that a dentry is stale when inode numbers or type types between a local inode and a remote file don't match. If this is the case attributes is not being copied from remote to local, so, it is already known that the local copy has stale metadata. That's why the inode needs to be marked for revalidation in order to tell the VFS to lookup the dentry again before openning a file. This prevents unexpected stale errors to be returned to the user space when openning a file. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Ross Lagerwall authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit a108471b ] Commit 7196ac11 ("Fix to check Unique id and FileType when client refer file directly.") checks whether the uniqueid of an inode has changed when getting the inode info, but only when using the UNIX extensions. Add a similar check for SMB2+, since this can be done without an extra network roundtrip. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1848780 [ Upstream commit 5bdea606 ] In fbtft_framebuffer_alloc the error handling path should take care of releasing frame buffer after it is allocated via framebuffer_alloc, too. Therefore, in two failure cases the goto destination is changed to address this issue. Fixes: c296d5f9 ("staging: fbtft: core support") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190930030949.28615-1-navid.emamdoost@gmail.comSigned-off-by:
-
Suzuki K Poulose authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 28c5dcb2 upstream Now that we have a clear understanding of the sign of a feature, rename the routines to reflect the sign, so that it is not misused. The cpuid_feature_extract_field() now accepts a 'sign' parameter. This makes sure that the arm64_ftr_value() extracts the feature field properly for signed fields. Cc: stable@vger.kernel.org # v4.4 Signed-off-by:
Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit ff96f7bc usptream Use the appropriate accessor for the feature bit by keeping track of the sign of the feature. This is a pre-requisite for the commit 28c5dcb2 upstream, which fixes the arm64_ftr_value() for signed feature fields. Cc: stable@vger.kernel.org # v4.4 Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit b0f53dbc upstream. Partially revert 16db3d3f ("kernel/sysctl.c: threads-max observe limits") because the patch is causing a regression to any workload which needs to override the auto-tuning of the limit provided by kernel. set_max_threads is implementing a boot time guesstimate to provide a sensible limit of the concurrently running threads so that runaways will not deplete all the memory. This is a good thing in general but there are workloads which might need to increase this limit for an application to run (reportedly WebSpher MQ is affected) and that is simply not possible after the mentioned change. It is also very dubious to override an admin decision by an estimation that doesn't have any direct relation to correctness of the kernel operation. Fix this by dropping set_max_threads from sysctl_max_threads so any value is accepted as long as it fits into MAX_THREADS which is important to check because allowing more threads could break internal robust futex restriction. While at it, do not use MIN_THREADS as the lower boundary because it is also only a heuristic for automatic estimation and admin might have a good reason to stop new threads to be created even when below this limit. This became more severe when we switched x86 from 4k to 8k kernel stacks. Starting since 6538b8ea ("x86_64: expand kernel stack to 16K") (3.16) we use THREAD_SIZE_ORDER = 2 and that halved the auto-tuned value. In the particular case 3.12 kernel.threads-max = 515561 4.4 kernel.threads-max = 200000 Neither of the two values is really insane on 32GB machine. I am not sure we want/need to tune the max_thread value further. If anything the tuning should be removed altogether if proven not useful in general. But we definitely need a way to override this auto-tuning. Link: http://lkml.kernel.org/r/20190922065801.GB18814@dhcp22.suse.cz Fixes: 16db3d3f ("kernel/sysctl.c: threads-max observe limits") Signed-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Pavel Shilovsky authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 0b3d0ef9 upstream. Mark inode for force revalidation if LOOKUP_REVAL flag is set. This tells the client to actually send a QueryInfo request to the server to obtain the latest metadata in case a directory or a file were changed remotely. Only do that if the client doesn't have a lease for the file to avoid unneeded round trips to the server. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 30573a82 upstream. Currently if the client identifies problems when processing metadata returned in CREATE response, the open handle is being leaked. This causes multiple problems like a file missing a lease break by that client which causes high latencies to other clients accessing the file. Another side-effect of this is that the file can't be deleted. Fix this by closing the file after the client hits an error after the file was opened and the open descriptor wasn't returned to the user space. Also convert -ESTALE to -EOPENSTALE to allow the VFS to revalidate a dentry and retry the open. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ian Rogers authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 7d4c85b7 upstream. The 'test_dir' variable is assigned to the 'release' array which is out-of-scope 3 lines later. Extend the scope of the 'release' array so that an out-of-scope array isn't accessed. Bug detected by clang's address sanitizer. Fixes: 07bc5c69 ("perf tools: Make fetch_kernel_version() publicly available") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20190926220018.25402-1-irogers@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
David Frey authored
BugLink: https://bugs.launchpad.net/bugs/1848780 commit 82f30156 upstream. When an end-of-conversion interrupt is received after performing a single-shot reading of the light sensor, the driver was waking up the result ready queue before checking opt->ok_to_ignore_lock to determine if it should unlock the mutex. The problem occurred in the case where the other thread woke up and changed the value of opt->ok_to_ignore_lock to false prior to the interrupt thread performing its read of the variable. In this case, the mutex would be unlocked twice. Signed-off-by:
David Frey <dpfrey@gmail.com> Reviewed-by:
Andreas Dannenberg <dannenberg@ti.com> Fixes: 94a9b7b1 ("iio: light: add support for TI's opt3001 light sensor") Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
