Merge tag 'omap-for-v4.8/dt-part1-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.8 merge window:

- PWM binding updates and related dts changes
- OCM RAM updates for dra7
- Enable n900 lirc-rx51 driver
- omap3-gta04 updates for backlight, bma180, itg3200, hmc5843 and wifi
- am335x, am437x and am57xx operating point updates and additions
- am335x-icev2 pca9536 node
- dra72-evm regulator updates
- edma spelling fixes
- am335x and am437x ethernet phy update
- a series of mcbsp updates
- omap3-gta04 eeprom
- dra7 PCIe unit address fix
- stdout-path for beaglebone variants
- crypto accelerator nodes for am335x, am437x and dra7

* tag 'omap-for-v4.8/dt-part1-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (42 commits)
  ARM: dts: AM43xx: Add node for RNG
  ARM: dts: AM43xx: clk: Add RNG clk node
  ARM: dts: DRA7: Add DT node for RNG IP
  ARM: dts: DRA7: Add support for SHA IP
  ARM: dts: DRA7: Add DT nodes for AES IP
  ARM: dts: DRA7: Add DT node for DES IP
  ARM: dts: am335x-bone-common: use stdout-path in Beaglebone boards.
  ARM: dts: DRA7: fix unit address of second PCIe instance
  ARM: dts: omap3-gta04: Add RFID eeprom node
  ARM: dts: omap4-duovero: Add pdmclk binding for audio
  ARM: dts: omap4-var-som-om44: Add pdmclk binding for audio
  ARM: dts: omap4-sdp: Add pdmclk binding for audio
  ARM: dts: omap4-panda-common: Add pdmclk binding for audio
  ARM: dts: omap5-board-common: Add pdmclk binding for audio
  ARM: dts: omap3: Add clocks to McBSP nodes
  ARM: dts: am335x-bone-common: Mark MAC as having only one PHY
  ARM: dts: am437x-idk-evm: Mark MAC as having only one PHY
  ARM: dts: Correct misspelling, "emda3" -> "edma3"
  ARM: dts: dra72-evm: Rename 3.3V regulator tag
  ARM: dts: am335x-icev2: Add DT node for TI PCA9536
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.8-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT Changes for 4.8 #2:
 - New board: at91sam9260ek
 - Fixes for the sam9_l9260
 - Sama5d2 Xplained PMIC fix
 - Addition of the PMU node for the sama5d2

* tag 'at91-ab-4.8-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: sama5d2_xplained: Update the pmic node
  ARM: dts: at91: sama5d2: add PMU node
  ARM: dts: at91: sam9_l9260: Modify information in LED nodes.
  ARM: dts: at91: sam9_l9260: Add pinctrl information to ethernet node.
  ARM: dts: at91: add at91sam9260ek board DT
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone_dts_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

ARM: Keystone DTS update for 4.8

	- Pinmux entries for K2G
	- PCI DTS entry fixup

* tag 'keystone_dts_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: k2g-evm: Add pinmuxing for UART0
  ARM: dts: keystone: Header file for pinctrl constants
  ARM: dts: k2g: Add pinctrl support
  ARM: dts: keystone-k2l: Add pinctrl node
  ARM: dts: keystone: add interrupt property to PCI controller bindings
  ARM: dts: keystone: remove bogus IO resource entry from PCI binding
Signed-off-by: Olof Johansson <olof@lixom.net>

Due to introducing the new driver - ACT8945A MFD drive,
change the pmic device node to align with the ACT8945A
regulator and charger drivers.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add node to support SAMA5D2 Performance Monitor Unit.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add power led node and rename status led node.
Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com>
Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add missing pinctrl information to ethernet node.
Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com>
Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add Device Tree source file for at91sam9260ek board. This official Atmel
Evaluation Kit is designed around a SoC based on a ARM 926 core the
at91sam9260.

The board is also added to the dts Makefile.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Adding DT node for hardware random number generator.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add clk node for RNG module.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adding dt node for hardware random number generator IP.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

DRA7 SoC has the same SHA IP as OMAP5. Add DT entry for the same.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: changed SHA to use EDMA instead of SDMA]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

DRA7 SoC has the same AES IP as OMAP4. Add DT entries for both AES cores.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: squashed in the change to use EDMA, squashed in
                  support for two AES cores]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

DRA7xx SoCs have a DES3DES IP. Add DT data for the same.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This commit adds the stdout-path propety in /chosen for all Beaglebone
boards.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This pull request contains Device Tree changes for Broadcom ARM-based SoCs:

- Chris provides documentation and DTS fixes for the bcm11351 CPU enable-method in preparation
  for adding support for the BCM23550 SoC and its corresponding documentation, SoC dtsi
  and the Sparrow board DTS file

- Jon adds MSI support to the PCI nodes, updates the secondary cores boot address for the B0
  production revision of the Northstar Plus SoC, adds a DTS for the BCM958625HR board, another
  one for the BCM958525XMC board, and finally adds the PL330 DMA controller to the NSP DTS

- Rafal enables the SPI NOR flash on dual flash systems (NAND + SPI) on the BCM5301x SoCs
  and devices

- Florian adds support for the BCM5301x built-in Ethernet switch by adding nodes for the
  Gigabit MAC controllers and the Switch Register Access block, and finally updates the
  SmartRG SR-400AC board with its switch port layout

* tag 'arm-soc/for-4.8/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC
  ARM: dts: BCM5301X: Add SRAB interrupts
  ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
  ARM: dts: NSP: Add PL330 support
  ARM: dts: NSP: Add XMC board support
  ARM: dts: bcm23550: Add device tree files
  Documentation: devicetree: Document BCM23550 bindings
  ARM: BCM5301X: Enable SPI-NOR on dual flash devices
  ARM: dts: NSP: Add new DT file for bcm958625hr
  ARM: dts: NSP: modify second CPU address
  ARM: dts: NSP: Add MSI support on PCI
  ARM: BCM: modify Broadcom CPU enable method
  ARM: dts: fix use of bcm11351 enable method
  Documentation: Binding docs for bcm11351 enable method
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic DT changes for v4.8
- add reset driver for meson8b

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: amlogic: Enable Reset Controller on Meson8b platforms
Signed-off-by: Olof Johansson <olof@lixom.net>

Update DTSI file to add the reset controller node.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

On these two boards, the serial0 is used for inter-chip connection,
so cannot be used for login console.  The serial2 is used instead
for them, but it is tedious to use because upper level deployment
projects must switch login console per board.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This node consists of various system-level configuration registers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This pin-muxing is needed to get access to the UniPhier System Bus.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT Changes for 4.8:
 - New board: Olimex SAM9-L9260
 - Fix crystal definitions for Denx ma5d4
 - Remove leftover clock definitions
 - Add stdout-path for usb_a9260/a9g20

* tag 'at91-ab-4.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: calao: remove leftovers clock definition
  ARM: dts: at91: pm9g45: remove leftovers clock definition
  ARM: dts: at91: mpa1600: remove leftovers clock definition
  ARM: dts: at91: ge863-pro3: remove leftovers clock definition
  ARM: dts: at91: at91-foxg20: remove leftovers clock definition
  ARM: dts: at91: at91-cosino: remove leftovers clock definition
  ARM: dts: at91: at91-ariag25: remove leftovers clock definition
  ARM: dts: at91: animeo_ip: remove leftovers clock definition
  ARM: dts: at91: ma5d4: properly define crystals frequencies
  ARM: dts: at91: usb_a9g20: use stdout-path
  ARM: dts: at91: Add DT support for Olimex SAM9-L9260 board.
  ARM: dts: at91: at91sam9260: Remove leading zeros in OHCI node.
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_updates_v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS updates for v4.8
- Update Arria10 ECC manager
- Add ethernet alias for Arria10
- Update serial alias for Arria10

* tag 'socfpga_updates_v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: fix definitions of serial console
  ARM: dts: socfpga: add ethernet alias on Arria10
  ARM: dts: Move Arria10 SDRAM as child of ECC Manager
  ARM: dts: Arria10 ECC Manager IRQ controller changes
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-dt-asoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Ux500 devicetree patches:
- Move the ab8500 compatible string from the board to the
  chipset.
- Define GPIO line names for the boards.

* tag 'ux500-dt-asoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: UX500: name the GPIO lines on HREFv60plus
  ARM: dts: Ux500: name the GPIO lines on Snowball
  ARM: dts: Ux500: move compatible string to chipset
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Updates for v4.8

* Fix W=1 dtc warnings
* Reverence both DMA controllers on R-Car Gen 2 SoCs
* Remove nonexistent thermal sensor clock from r8a7794 SoC
* Correct unit names for cpu nodes on r8a7790 SoC
* Add MMCIF0 to r8a7793 SoC
* RTS/CTS hardware flow control for kzm9g and bockw boards

* tag 'renesas-dt-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (30 commits)
  ARM: dts: silk: Fix W=1 dtc warnings
  ARM: dts: porter: Fix W=1 dtc warnings
  ARM: dts: marzen: Fix W=1 dtc warnings
  ARM: dts: lager: Fix W=1 dtc warnings
  ARM: dts: kzm9g: Fix W=1 dtc warnings
  ARM: dts: kzm9d: Fix W=1 dtc warnings
  ARM: dts: koelsch: Fix W=1 dtc warnings
  ARM: dts: gose: Fix W=1 dtc warnings
  ARM: dts: genmai: Fix W=1 dtc warnings
  ARM: dts: bockw: Fix W=1 dtc warnings
  ARM: dts: armadillo800eva: Fix W=1 dtc warnings
  ARM: dts: ape6evm: Fix W=1 dtc warnings
  ARM: dts: sh73a0: Fix W=1 dtc warnings
  ARM: dts: r8a7794: Fix W=1 dtc warnings
  ARM: dts: r8a7793: Fix W=1 dtc warnings
  ARM: dts: r8a7791: Fix W=1 dtc warnings
  ARM: dts: r8a7790: Fix W=1 dtc warnings
  ARM: dts: r8a7778: Fix W=1 dtc warnings
  ARM: dts: r8a7740: Fix W=1 dtc warnings
  ARM: dts: r8a73a4: Fix W=1 dtc warnings
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-odroid-xu-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Topic branch for adding Exynos 5410 Odroid XU board for v4.8.

This brings support for Hardkernel's Odroid XU board.  It was the first
design with big.LITTLE SoC from Samsung: Exynos5410.  The board is not
very popular.  Newer XU3 and XU4 got more attention.

Board details:
1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is
   enabled),
2. 2 GB DDR3 RAM,
3. PowerVR SGX544MP3 GPU (not enabled in DTS),
4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4,
5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of
   revisions though),
6. eMMC 4.5 and microSD slots.

* tag 'samsung-dt-odroid-xu-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (28 commits)
  ARM: dts: exynos: Add watchdog and Security SubSystem to Exynos5410
  ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board
  ARM: dts: exynos: Add Thermal Management Unit to Exynos5410
  ARM: dts: exynos: Interrupt for USB DWC3-1 differs between Exynos5420 and 5410
  dt-bindings: clock: Add watchdog and SSS clock IDs to Exynos5410
  dt-bindings: clock: Add TMU clock ID to Exynos5410
  ARM: dts: exynos: Add RTC and I2C to Exynos5410
  ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
  ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
  ARM: dts: exynos: Add initial support for Odroid XU board
  ARM: dts: exynos: Add USB to Exynos5410
  ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
  ARM: dts: exynos: Enable UART3 on Exynos5410
  ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc
  ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  ARM: dts: exynos: Move common nodes to exynos5.dtsi
  ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Samsung DeviceTree update for v4.8:
1. Add missing async bridge for MFC power domain on Exynos5420.
   This fixes imprecise abort on s5p-mfc re-bind.
2. Define regulator supplies for MMC nodes on Exynos4412 Odroid boards
   and for TMU on Exynos542x Peach boards.
3. Thermal cleanups on Odroid XU3-family (Exynos5422).
4. Enable AX88760 USB hub on Origen board (Exynos4412).
5. Minor cleanups.

* tag 'samsung-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: No need to enable TMU nodes on Odroid XU3 family
  ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
  ARM: dts: exynos: Use new compatible string for thermistors in Trats2
  ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards
  ARM: dts: exynos: Enable AX88760 USB hub on Origen board
  ARM: dts: exynos: Only Odroid XU3-family boards use DTSI with CPU thermal nodes
  ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3
  ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3
  ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3
  ARM: dts: exynos: Add async-bridge clock to MFC power domain for Exynos5420
Signed-off-by: Olof Johansson <olof@lixom.net>

Define the port mapping for the SmartRG SR400ACE device.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Add interrupt mapping for the Switch Register Access Block. Only 12
interrupts are usable at the moment even though up to 32 are dedicated
to the SRAB.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Add the Switch Register Access Block which is a special piece of
hardware allowing us to perform indirect read/writes towards the
integrated BCM5301X Ethernet switch.

We also add the 4 Gigabit MAC Device Tree nodes within the brcm,bus-axi
bus node to get proper binding between the BCMA instantiated core and
the Device Tree nodes. We will need that to be able to reference
Ethernet Device Tree nodes in a future patch adding the switch ports
layout.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Pull thermal management fixes from Zhang Rui:

 - fix an ordering issue in cpu cooling that cooling device is
   registered before it's ready (freq_table being populated).
   (Lukasz Luba)

 - fix a missing comment update (Caesar Wang)

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: add the note for set_trip_temp
  thermal: cpu_cooling: fix improper order during initialization

Pull block layer fixes from Jens Axboe:
 "A small collection of fixes for the current series.  This contains:

   - Two fixes for xen-blkfront, from Bob Liu.

   - A bug fix for NVMe, releasing only the specific resources we
     requested.

   - Fix for a debugfs flags entry for nbd, from Josef.

   - Plug fix from Omar, fixing up a case of code being switched between
     two functions.

   - A missing bio_put() for the new discard callers of
     submit_bio_wait(), fixing a regression causing a leak of the bio.
     From Shaun.

   - Improve dirty limit calculation precision in the writeback code,
     fixing a case where setting a limit lower than 1% of memory would
     end up being zero.  From Tejun"

* 'for-linus' of git://git.kernel.dk/linux-block:
  NVMe: Only release requested regions
  xen-blkfront: fix resume issues after a migration
  xen-blkfront: don't call talk_to_blkback when already connected to blkback
  nbd: pass the nbd pointer for flags debugfs
  block: missing bio_put following submit_bio_wait
  blk-mq: really fix plug list flushing for nomerge queues
  writeback: use higher precision calculation in domain_dirty_limits()

Pull GPIO fixes from Linus Walleij:
 "A new bunch of GPIO fixes for v4.7.

  This time I am very grateful that Ricardo Ribalda Delgado went in and
  fixed my stupid refcounting mistakes in the removal path for GPIO
  chips.  I had a feeling something was wrong here and so it was.  It
  exploded on OMAP and it fixes their problem.  Now it should be (more)
  solid.

  The rest i compilation, Kconfig and driver fixes.  Some tagged for
  stable.

  Summary:

   - Fix a NULL pointer dereference when we are searching the GPIO
     device list but one of the devices have been removed (struct
     gpio_chip pointer is NULL).

   - Fix unaligned reference counters: we were ending on +3 after all
     said and done.  It should be 0.  Remove an extraneous get_device(),
     and call cdev_del() followed by device_del() in gpiochip_remove()
     instead and the count goes to zero and calls the release() function
     properly.

   - Fix a compile warning due to a missing #include in the OF/device
     tree portions.

   - Select ANON_INODES for GPIOLIB, we're using that for our character
     device.  Some randconfig tests disclosed the problem.

   - Make sure the Zynq driver clock runs also without CONFIG_PM enabled

   - Fix an off-by-one error in the 104-DIO-48E driver

   - Fix warnings in bcm_kona_gpio_reset()"

* tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
  gpio: select ANON_INODES
  gpio: include <linux/io-mapping.h> in gpiolib-of
  gpiolib: Fix unaligned used of reference counters
  gpiolib: Fix NULL pointer deference
  gpio: zynq: initialize clock even without CONFIG_PM
  gpio: 104-dio-48e: Fix control port offset computation off-by-one error

Pull SCSI fixes from James Bottomley:
 "Two current fixes:

   - one affects Qemu CD ROM emulation, which stopped working after the
     updates in SCSI to require VPD pages from all conformant devices.

     Fix temporarily by blacklisting Qemu (we can relax later when they
     come into compliance).

   - The other is a fix to the optimal transfer size.  We set up a
     minefield for ourselves by being confused about whether the limits
     are in bytes or sectors (SCSI optimal is in blocks and the queue
     parameter is in bytes).

     This tries to fix the problem (wrong setting for queue limits
     max_sectors) and make the problem more obvious by introducing a
     wrapper function"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  sd: Fix rw_max for devices that report an optimal xfer size
  scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist

Pull i2c fixes from Wolfram Sang:

 - a bigger fix for i801 to finally be able to be loaded on some
   machines again

 - smaller driver fixes

 - documentation update because of a renamed file

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mux: reg: Provide of_match_table
  i2c: mux: refer to i2c-mux.txt
  i2c: octeon: Avoid printk after too long SMBUS message
  i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
  i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR

Pull DeviceTree fixes from Rob Herring:

 - fix unflatten_dt_nodes when dad parameter is set.

 - add vendor prefixes for TechNexion and UniWest

 - documentation fix for Marvell BT

 - OF IRQ kerneldoc fixes

 - restrict CMA alignment adjustments to non dma-coherent

 - a couple of warning fixes in reserved-memory code

 - DT maintainers updates

* tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch
  drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes()
  drivers: of: Fix of_pci.h header guard
  dt-bindings: Add vendor prefix for TechNexion
  of: add vendor prefix for UniWest
  dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device
  of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF
  of: silence warnings due to max() usage
  drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent
  of: irq: fix of_irq_get[_byname]() kernel-doc
  MAINTAINERS: DeviceTree maintainer updates

Merge tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux

Pull uvc compat XU ioctl fixes from Andy Lutomirski:
 "uvc's compat XU ioctls go through tons of potentially buggy
  indirection.  The first patch removes the indirection.  The second one
  cleans up the code.

  Compile-tested only.  I have the hardware, but I have absolutely no
  idea what XU does, how to use it, what software to recompile as
  32-bit, or what to test in that software"

* tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
  uvc_v4l2: Simplify compat ioctl implementation
  uvc: Forward compat ioctls to their handlers directly

The uvc compat ioctl implementation seems to have copied user data
for no good reason.  Remove a bunch of copies.
Signed-off-by: Andy Lutomirski <luto@kernel.org>

The current code goes through a lot of indirection just to call a
known handler.  Simplify it: just call the handlers directly.

Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>