Skip to content

L
linux
Switch branch/tag
  1. 31 Aug, 2024 1 commit
    • Linus Torvalds's avatar
      Merge tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux · ad246d9f
      Linus Torvalds authored 
      Pull io_uring fixes from Jens Axboe:

 - A fix for a regression that happened in 6.11 merge window, where the
   copying of iovecs for compat mode applications got broken for certain
   cases.

 - Fix for a bug introduced in 6.10, where if using recv/send bundles
   with classic provided buffers, the recv/send would fail to set the
   right iovec count. This caused 0 byte send/recv results. Found via
   code coverage testing and writing a test case to exercise it.

* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
  io_uring/kbuf: return correct iovec count from classic buffer peek
  io_uring/rsrc: ensure compat iovecs are copied correctly
      ad246d9f
  3. 30 Aug, 2024 13 commits
  5. 29 Aug, 2024 26 commits
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2024-08-29' of... · 9941b5bc
      Dave Airlie authored 
      Merge tag 'drm-intel-fixes-2024-08-29' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes

- Fix #11195: The external display connect via USB type-C dock stays blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
. Move ARL GuC firmware to correct version
-
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtAd8WTw1xiSu_TS@jlahtine-mobl.ger.corp.intel.com
      9941b5bc
    • Linus Torvalds's avatar
      Merge tag 'hwmon-for-v6.11-rc6' of... · 3b9dfd9e
      Linus Torvalds authored 
      Merge tag 'hwmon-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - pt5161l: Fix invalid temperature reading of bad ADC values

 - asus-ec-sensors: Remove unsupported VRM temperature from X570-E
   GAMING

* tag 'hwmon-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pt5161l) Fix invalid temperature reading
  hwmon: (asus-ec-sensors) remove VRM temp X570-E GAMING
      3b9dfd9e
    • Linus Torvalds's avatar
      Merge tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 0dd5dd63
      Linus Torvalds authored 
      Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth, wireless and netfilter.

  No known outstanding regressions.

  Current release - regressions:

   - wifi: iwlwifi: fix hibernation

   - eth: ionic: prevent tx_timeout due to frequent doorbell ringing

  Previous releases - regressions:

   - sched: fix sch_fq incorrect behavior for small weights

   - wifi:
      - iwlwifi: take the mutex before running link selection
      - wfx: repair open network AP mode

   - netfilter: restore IP sanity checks for netdev/egress

   - tcp: fix forever orphan socket caused by tcp_abort

   - mptcp: close subflow when receiving TCP+FIN

   - bluetooth: fix random crash seen while removing btnxpuart driver

  Previous releases - always broken:

   - mptcp: more fixes for the in-kernel PM

   - eth: bonding: change ipsec_lock from spin lock to mutex

   - eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response

  Misc:

   - documentation: drop special comment style for net code"

* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  nfc: pn533: Add poll mod list filling check
  mailmap: update entry for Sriram Yagnaraman
  selftests: mptcp: join: check re-re-adding ID 0 signal
  mptcp: pm: ADD_ADDR 0 is not a new address
  selftests: mptcp: join: validate event numbers
  mptcp: avoid duplicated SUB_CLOSED events
  selftests: mptcp: join: check re-re-adding ID 0 endp
  mptcp: pm: fix ID 0 endp usage after multiple re-creations
  mptcp: pm: do not remove already closed subflows
  selftests: mptcp: join: no extra msg if no counter
  selftests: mptcp: join: check re-adding init endp with != id
  mptcp: pm: reset MPC endp ID when re-added
  mptcp: pm: skip connecting to already established sf
  mptcp: pm: send ACK on an active subflow
  selftests: mptcp: join: check removing ID 0 endpoint
  mptcp: pm: fix RM_ADDR ID for the initial subflow
  mptcp: pm: reuse ID 0 after delete and re-add
  net: busy-poll: use ktime_get_ns() instead of local_clock()
  sctp: fix association labeling in the duplicate COOKIE-ECHO case
  mptcp: pr_debug: add missing \n at the end
  ...
      0dd5dd63
    • Karthik Poosa's avatar
      drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16 · 59d237c8
      Karthik Poosa authored 
      WRITE_I1 sub-command of the POWER_SETUP pcode command accepts a u16
parameter instead of u32. This change prevents potential illegal
sub-command errors.

v2: Mask uval instead of changing the prototype. (Badal)

v3: Rephrase commit message. (Badal)
Signed-off-by: default avatarKarthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a42 ("drm/xe/hwmon: Expose card reactive critical power")
Reviewed-by: default avatarBadal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827155301.183383-1-karthik.poosa@intel.comSigned-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a7f65709)
Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
      59d237c8
    • Aleksandr Mishin's avatar
      nfc: pn533: Add poll mod list filling check · febccb39
      Aleksandr Mishin authored 
      In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.

Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
  nfc_start_poll()
    ->start_poll()
    pn533_start_poll()

Add poll mod list filling check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: dfccd0f5 ("NFC: pn533: Add some polling entropy")
Signed-off-by: default avatarAleksandr Mishin <amishin@t-argos.ru>
Acked-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ruSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      febccb39
    • Paolo Abeni's avatar
      Merge tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf · 0240bceb
      Paolo Abeni authored 
      Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes
payload from netdev/egress by subtracting skb_network_offset() when
validating IPv4 packet length, otherwise 'meta l4proto udp' never
matches.

Patch #2 subtracts skb_network_offset() when validating IPv6 packet
length for netdev/egress.

netfilter pull request 24-08-28

* tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation
  netfilter: nf_tables: restore IP sanity checks for netdev/egress
====================

Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.orgSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      0240bceb
    • Sriram Yagnaraman's avatar
      mailmap: update entry for Sriram Yagnaraman · 6213dcc7
      Sriram Yagnaraman authored 
      Link my old est.tech address to my active mail address
Signed-off-by: default avatarSriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Reviewed-by: Kurt Kanzenbach's avatarKurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      6213dcc7
    • Paolo Abeni's avatar
      Merge branch 'mptcp-more-fixes-for-the-in-kernel-pm' · b666a651
      Paolo Abeni authored 
      Matthieu Baerts says:

====================
mptcp: more fixes for the in-kernel PM

Here is a new batch of fixes for the MPTCP in-kernel path-manager:

Patch 1 ensures the address ID is set to 0 when the path-manager sends
an ADD_ADDR for the address of the initial subflow. The same fix is
applied when a new subflow is created re-using this special address. A
fix for v6.0.

Patch 2 is similar, but for the case where an endpoint is removed: if
this endpoint was used for the initial address, it is important to send
a RM_ADDR with this ID set to 0, and look for existing subflows with the
ID set to 0. A fix for v6.0 as well.

Patch 3 validates the two previous patches.

Patch 4 makes the PM selecting an "active" path to send an address
notification in an ACK, instead of taking the first path in the list. A
fix for v5.11.

Patch 5 fixes skipping the establishment of a new subflow if a previous
subflow using the same pair of addresses is being closed. A fix for
v5.13.

Patch 6 resets the ID linked to the initial subflow when the linked
endpoint is re-added, possibly with a different ID. A fix for v6.0.

Patch 7 validates the three previous patches.

Patch 8 is a small fix for the MPTCP Join selftest, when being used with
older subflows not supporting all MIB counters. A fix for a commit
introduced in v6.4, but backported up to v5.10.

Patch 9 avoids the PM to try to close the initial subflow multiple
times, and increment counters while nothing happened. A fix for v5.10.

Patch 10 stops incrementing local_addr_used and add_addr_accepted
counters when dealing with the address ID 0, because these counters are
not taking into account the initial subflow, and are then not
decremented when the linked addresses are removed. A fix for v6.0.

Patch 11 validates the previous patch.

Patch 12 avoids the PM to send multiple SUB_CLOSED events for the
initial subflow. A fix for v5.12.

Patch 13 validates the previous patch.

Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it
in order to re-create the initial subflow if it has been closed, even if
the limit for *new* addresses -- not taking into account the address of
the initial subflow -- has been reached. A fix for v5.10.

Patch 15 validates the previous patch.
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
---
Matthieu Baerts (NGI0) (15):
      mptcp: pm: reuse ID 0 after delete and re-add
      mptcp: pm: fix RM_ADDR ID for the initial subflow
      selftests: mptcp: join: check removing ID 0 endpoint
      mptcp: pm: send ACK on an active subflow
      mptcp: pm: skip connecting to already established sf
      mptcp: pm: reset MPC endp ID when re-added
      selftests: mptcp: join: check re-adding init endp with != id
      selftests: mptcp: join: no extra msg if no counter
      mptcp: pm: do not remove already closed subflows
      mptcp: pm: fix ID 0 endp usage after multiple re-creations
      selftests: mptcp: join: check re-re-adding ID 0 endp
      mptcp: avoid duplicated SUB_CLOSED events
      selftests: mptcp: join: validate event numbers
      mptcp: pm: ADD_ADDR 0 is not a new address
      selftests: mptcp: join: check re-re-adding ID 0 signal

 net/mptcp/pm.c                                  |   4 +-
 net/mptcp/pm_netlink.c                          |  87 ++++++++++----
 net/mptcp/protocol.c                            |   6 +
 net/mptcp/protocol.h                            |   5 +-
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++----
 tools/testing/selftests/net/mptcp/mptcp_lib.sh  |   4 +
 6 files changed, 209 insertions(+), 50 deletions(-)
---
base-commit: 3a0504d5
change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817

Best regards,
====================

Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.orgSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      b666a651
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: check re-re-adding ID 0 signal · f18fa2ab
      Matthieu Baerts (NGI0) authored 
      This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      f18fa2ab
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: ADD_ADDR 0 is not a new address · 57f86203
      Matthieu Baerts (NGI0) authored 
      The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.

When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.

Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.

Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      57f86203
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: validate event numbers · 20ccc7c5
      Matthieu Baerts (NGI0) authored 
      This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.

A new helper has been introduced to easily check these events. The
missing events have been added to the lib.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: b911c97c ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      20ccc7c5
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: avoid duplicated SUB_CLOSED events · d82809b6
      Matthieu Baerts (NGI0) authored 
      The initial subflow might have already been closed, but still in the
connection list. When the worker is instructed to close the subflows
that have been marked as closed, it might then try to close the initial
subflow again.

 A consequence of that is that the SUB_CLOSED event can be seen twice:

  # ip mptcp endpoint
  1.1.1.1 id 1 subflow dev eth0
  2.2.2.2 id 2 subflow dev eth1

  # ip mptcp monitor &
  [         CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
  [     ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
  [  SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9

  # ip mptcp endpoint delete id 1
  [       SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
  [       SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9

The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the
second one from __mptcp_close_subflow().

To avoid doing the post-closed processing twice, the subflow is now
marked as closed the first time.

Note that it is not enough to check if we are dealing with the first
subflow and check its sk_state: the subflow might have been reset or
closed before calling mptcp_close_ssk().

Fixes: b911c97c ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Tested-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      d82809b6
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: check re-re-adding ID 0 endp · d397d724
      Matthieu Baerts (NGI0) authored 
      This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.

Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      d397d724
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: fix ID 0 endp usage after multiple re-creations · 9366922a
      Matthieu Baerts (NGI0) authored 
      'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".

It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once.
Reported-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512
Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com
Cc: stable@vger.kernel.org
Tested-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      9366922a
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: do not remove already closed subflows · 58e1b66b
      Matthieu Baerts (NGI0) authored 
      It is possible to have in the list already closed subflows, e.g. the
initial subflow has been already closed, but still in the list. No need
to try to close it again, and increments the related counters again.

Fixes: 0ee4261a ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      58e1b66b
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: no extra msg if no counter · 76a2d839
      Matthieu Baerts (NGI0) authored 
      The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.

While at it, fix the indentation around, which is wrong since the same
commit.

Fixes: 47867f0a ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarGeliang Tang <geliang@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      76a2d839
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: check re-adding init endp with != id · 1c2326fc
      Matthieu Baerts (NGI0) authored 
      The initial subflow has a special local ID: 0. It is specific per
connection.

When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.

This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.

Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      1c2326fc
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: reset MPC endp ID when re-added · dce1c6d1
      Matthieu Baerts (NGI0) authored 
      The initial subflow has a special local ID: 0. It is specific per
connection.

When a global endpoint is deleted and re-added later, it can have a
different ID -- most services managing the endpoints automatically don't
force the ID to be the same as before. It is then important to track
these modifications to be consistent with the ID being used for the
address used by the initial subflow, not to confuse the other peer or to
send the ID 0 for the wrong address.

Now when removing an endpoint, msk->mpc_endpoint_id is reset if it
corresponds to this endpoint. When adding a new endpoint, the same
variable is updated if the address match the one of the initial subflow.

Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      dce1c6d1
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: skip connecting to already established sf · bc19ff57
      Matthieu Baerts (NGI0) authored 
      The lookup_subflow_by_daddr() helper checks if there is already a
subflow connected to this address. But there could be a subflow that is
closing, but taking time due to some reasons: latency, losses, data to
process, etc.

If an ADD_ADDR is received while the endpoint is being closed, it is
better to try connecting to it, instead of rejecting it: the peer which
has sent the ADD_ADDR will not be notified that the ADD_ADDR has been
rejected for this reason, and the expected subflow will not be created
at the end.

This helper should then only look for subflows that are established, or
going to be, but not the ones being closed.

Fixes: d84ad049 ("mptcp: skip connecting the connected address")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      bc19ff57
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: send ACK on an active subflow · c07cc3ed
      Matthieu Baerts (NGI0) authored 
      Taking the first one on the list doesn't work in some cases, e.g. if the
initial subflow is being removed. Pick another one instead of not
sending anything.

Fixes: 84dfe367 ("mptcp: send out dedicated ADD_ADDR packet")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      c07cc3ed
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: check removing ID 0 endpoint · 5f94b08c
      Matthieu Baerts (NGI0) authored 
      Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.

Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      5f94b08c
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: fix RM_ADDR ID for the initial subflow · 87b5896f
      Matthieu Baerts (NGI0) authored 
      The initial subflow has a special local ID: 0. When an endpoint is being
deleted, it is then important to check if its address is not linked to
the initial subflow to send the right ID.

If there was an endpoint linked to the initial subflow, msk's
mpc_endpoint_id field will be set. We can then use this info when an
endpoint is being removed to see if it is linked to the initial subflow.

So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(),
it is no longer needed to use mptcp_local_id_match().

Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      87b5896f
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: reuse ID 0 after delete and re-add · 8b8ed1b4
      Matthieu Baerts (NGI0) authored 
      When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.

Note that the endpoint should then need to be re-added reusing the same
ID.

Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      8b8ed1b4
    • Dave Airlie's avatar
      Merge tag 'amd-drm-fixes-6.11-2024-08-28' of... · bd3755c1
      Dave Airlie authored 
      Merge tag 'amd-drm-fixes-6.11-2024-08-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.11-2024-08-28:

amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828184908.125387-1-alexander.deucher@amd.com
      bd3755c1
    • Linus Torvalds's avatar
      Merge tag 'random-6.11-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random · d5d547aa
      Linus Torvalds authored 
      Pull random number generator fix from Jason Donenfeld:
 "Reject invalid flags passed to vgetrandom() in the same way that
  getrandom() does, so that the behavior is the same, from Yann.

  The flags argument to getrandom() only has a behavioral effect on the
  function if the RNG isn't initialized yet, so vgetrandom() falls back
  to the syscall in that case. But if the RNG is initialized, all of the
  flags behave the same way, so vgetrandom() didn't bother checking
  them, and just ignored them entirely.

  But that doesn't account for invalid flags passed in, which need to be
  rejected so we can use them later"

* tag 'random-6.11-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: vDSO: reject unknown getrandom() flags
      d5d547aa
    • Eric Dumazet's avatar
      net: busy-poll: use ktime_get_ns() instead of local_clock() · 0870b0d8
      Eric Dumazet authored 
      Typically, busy-polling durations are below 100 usec.

When/if the busy-poller thread migrates to another cpu,
local_clock() can be off by +/-2msec or more for small
values of HZ, depending on the platform.

Use ktimer_get_ns() to ensure deterministic behavior,
which is the whole point of busy-polling.

Fixes: 06021292 ("net: add low latency socket poll")
Fixes: 9a3c71aa ("net: convert low latency sockets to sched_clock()")
Fixes: 37089834 ("sched, net: Fixup busy_loop_us_clock()")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: default avatarJoe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0870b0d8
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7