Make sure kernel reads full size of elf data.  Error out if mmap fails
when mapping any sections of the executable.  Make sure interpreter
string is NULL terminated. 
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On Tue, Nov 09, 2004 at 01:38:11PM -0600, Jason.Jorgensen@comtrol.com wrote:
     On Tuesday, November 09, 2004 10:58 AM, Theodore Ts'o <tytso@mit.edu> wrote:
    > I developed the Rocketport device driver under contract of Comtrol,
    > with the understanding that the resulting device driver would be
    > released under the GPL.  So I believe the correct way of resolving the
    > conflicting copyright statements is to delete the following lines.
    > 
    > It would be good to get positive confirmation from Comtrol as well
    > that this is their understanding as well. 
   
     You are absolutely correct. That notice slipped by us and should not be in
     there. 
   
     If someone with access to the mainline source could remove that for us we
     would appreciate it.

Cc: Keith.Hammerbeck@comtrol.com, Steve.Erler@comtrol.com
Acked-by: Jason.Jorgensen@comtrol.com
Signed-off-by: "Theodore Ts'o" <tytso@thunk.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Only set the flag in the cases when the exit state is not either
TASK_DEAD or TASK_ZOMBIE.

(TASK_DEAD or TASK_ZOMBIE will either race or we'll return the 
information, so no need to note them).

I confirmed that this fixes the problem and I also ran some LTP tests
Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into cantab.net:/home/src/ntfs-2.6-devel

into cantab.net:/home/src/ntfs-2.6-devel

- Cleanup fs/ntfs/aops.c::ntfs_{read,write}page() since we know that a
  resident attribute will be smaller than a page which makes the code
  simpler.  Also make the code more tolerant to concurrent ->truncate.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>

into flatcap.org:/home/flatcap/backup/bk/ntfs-2.6-devel

      fs/ntfs/aops.c::ntfs_prepare_write() for now as it is not safe.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>

        Cannot just call fs/ntfs/aops.c::mark_ntfs_record_dirty() since
        this also marks the page dirty so we create the buffers by hand
        and set them uptodate.
      - Revert the removal of the page uptodate check from
        fs/ntfs/aops.c::mark_ntfs_record_dirty() as it is no longer called
        from fs/ntfs/mft.c::ntfs_sync_mft_mirror().
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Because reference of fls becomes error.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Eliminate useless clobber.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Kernel startup code specific to the Coldfire 5272 based CANcam board.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move the ColdFire 5282 specific register definitions into a common
528x definition include. They can be used for all members of the
528x CPU family.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The ColdFire 527x and 528x use the same FEC ethernet register offsets.
Conditionally use the correct structure.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove unused include of asm/delay.h from ColdFire 5407 configuration
code.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move the M5282EVB kernel startup code from the 5282 specific platform
directory to a common 528x platform directory. All ColdFire 582x
CPU cores are the same, just minor peripheral differences. Renaming
the sub-directory to match the proper board name (M5282EVB), not
use the generic MOTOROLA.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move the ColdFire 5282 specific platform Makefile into the common
528x CPU platform directory.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move the ColdFire 5282 specific CPU configuration code into the common
528x CPU platform directory. It can be used for all members of the
528x CPU family.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add kernel startup code for the Freescale 5275EVB board.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

        fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(),
        and write_mft_record_nolock().  From now on we require that the
        complete runlist for the mft mirror is always mapped into memory.
      - Add creation of buffers to fs/ntfs/mft.c::ntfs_sync_mft_mirror().
      - Do not check for the page being uptodate in mark_ntfs_record_dirty()
        as we now call this after marking the page not uptodate during mft
        mirror synchronisation (fs/ntfs/mft.c::ntfs_sync_mft_mirror()).
      - Improve error handling in fs/ntfs/aops.c::ntfs_{read,write}_block().
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>

into cantab.net:/home/src/ntfs-2.6-devel

Create basic hardware configuration and setup code for the newly
added Freescale 527x family of CPU's (5270/5271/5274/5275).
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Determine the DRAM size dynamically for the MOTOROLA 5206e platform.
We can just read back the SDRAM register configuration bits to 
determine what the RAM size really is.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Removed unused include of asm/delay.h.
Add support for getting boot args from dedicated flash segment
on the SCALES and CANcam boards.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Include linux/delay.h instead of asm/delay.h in ColdFire vector
handling code.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Build the PIT timer code in for 528x and 527x CPU targets.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Makefile to support building the Freescale 527x platform support.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Updated default configuration for the m68knommu architectures.
Adds newly created CPU and clock configurations.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Kernel startup code specific to the Freescale M5271EVB board.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A big update to the ColdFire FEC ethernet driver.
This has been in the works for a while (and thus tested for
a while too). Fundamentally through there is 3 important
changes:

. support 528x and 527x device families
. allow for multiple FEC devices to be present (for example 2 on the 5274/5)
. support the Kendein 8721 PHY
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move the PIT timer code from the 5282 specific platform directory
to the common ColdFire platform code directory (5307). Freescale
are using the PIT timer on other devices now (at least the 523x and
527x families), so put it near the other common timer code so they
can all use it easily.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Sun tells me:

  For many years both Solaris x86 and Linux have used the same fdisk
  partition id of 0x82.  Solaris uses that identifier to allocate disk
  space which is then further subdivided by the Solaris VTOC (Volume
  Table of Contents) and Linux uses that id as the identifier for its
  swap partition.

  The new release of Solaris should be out early next year. Solaris
  will begin using a partition id of 0xbf.  We will continue to support
  the older partition id value of 0x82 for compatibility reasons.

  Solaris's fdisk program has been enhanced to allow system administrators
  to switch back and forth between the new and old identifier without any
  loss of data.

So, this may be useful to some people a few months from now.

Not surprisingly, the ext3 code crashes in the same way
the ext2 code does when dividing by zero.

I have directories full of typo corrections - don't know
whether you want them. Below some wierds.

Added the hp and 5xbsd flavors of ufstype.