- 05 Dec, 2022 3 commits
-
-
Marc Zyngier authored
* kvm-arm64/selftest/s2-faults: : . : New KVM/arm64 selftests exercising various sorts of S2 faults, courtesy : of Ricardo Koller. From the cover letter: : : "This series adds a new aarch64 selftest for testing stage 2 fault handling : for various combinations of guest accesses (e.g., write, S1PTW), backing : sources (e.g., anon), and types of faults (e.g., read on hugetlbfs with a : hole, write on a readonly memslot). Each test tries a different combination : and then checks that the access results in the right behavior (e.g., uffd : faults with the right address and write/read flag). [...]" : . KVM: selftests: aarch64: Add mix of tests into page_fault_test KVM: selftests: aarch64: Add readonly memslot tests into page_fault_test KVM: selftests: aarch64: Add dirty logging tests into page_fault_test KVM: selftests: aarch64: Add userfaultfd tests into page_fault_test KVM: selftests: aarch64: Add aarch64/page_fault_test KVM: selftests: Use the right memslot for code, page-tables, and data allocations KVM: selftests: Fix alignment in virt_arch_pgd_alloc() and vm_vaddr_alloc() KVM: selftests: Add vm->memslots[] and enum kvm_mem_region_type KVM: selftests: Stash backing_src_type in struct userspace_mem_region tools: Copy bitfield.h from the kernel sources KVM: selftests: aarch64: Construct DEFAULT_MAIR_EL1 using sysreg.h macros KVM: selftests: Add missing close and munmap in __vm_mem_region_delete() KVM: selftests: aarch64: Add virt_get_pte_hva() library function KVM: selftests: Add a userfaultfd library Signed-off-by:Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
* kvm-arm64/selftest/linked-bps: : . : Additional selftests for the arm64 breakpoints/watchpoints, : courtesy of Reiji Watanabe. From the cover letter: : : "This series adds test cases for linked {break,watch}points to the : debug-exceptions test, and expands {break,watch}point tests to : use non-zero {break,watch}points (the current test always uses : {break,watch}point#0)." : . KVM: arm64: selftests: Test with every breakpoint/watchpoint KVM: arm64: selftests: Add a test case for a linked watchpoint KVM: arm64: selftests: Add a test case for a linked breakpoint KVM: arm64: selftests: Change debug_version() to take ID_AA64DFR0_EL1 KVM: arm64: selftests: Stop unnecessary test stage tracking of debug-exceptions KVM: arm64: selftests: Add helpers to enable debug exceptions KVM: arm64: selftests: Remove the hard-coded {b,w}pn#0 from debug-exceptions KVM: arm64: selftests: Add write_dbg{b,w}{c,v}r helpers in debug-exceptions KVM: arm64: selftests: Use FIELD_GET() to extract ID register fields Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/selftest/memslot-fixes: : . : KVM memslot selftest fixes for non-4kB page sizes, courtesy : of Gavin Shan. From the cover letter: : : "kvm/selftests/memslots_perf_test doesn't work with 64KB-page-size-host : and 4KB-page-size-guest on aarch64. In the implementation, the host and : guest page size have been hardcoded to 4KB. It's ovbiously not working : on aarch64 which supports 4KB, 16KB, 64KB individually on host and guest. : : This series tries to fix it. After the series is applied, the test runs : successfully with 64KB-page-size-host and 4KB-page-size-guest." : . KVM: selftests: memslot_perf_test: Report optimal memory slots KVM: selftests: memslot_perf_test: Consolidate memory KVM: selftests: memslot_perf_test: Support variable guest page size KVM: selftests: memslot_perf_test: Probe memory slots for once KVM: selftests: memslot_perf_test: Consolidate loop conditions in prepare_vm() KVM: selftests: memslot_perf_test: Use data->nslots in prepare_vm() Signed-off-by:
-
- 10 Nov, 2022 29 commits
-
-
Ricardo Koller authored
Add some mix of tests into page_fault_test: memory regions with all the pairwise combinations of read-only, userfaultfd, and dirty-logging. For example, writing into a read-only region which has a hole handled with userfaultfd. Signed-off-by:
Ricardo Koller <ricarkol@google.com> Signed-off-by:
-
Ricardo Koller authored
Add some readonly memslot tests into page_fault_test. Mark the data and/or page-table memory regions as readonly, perform some accesses, and check that the right fault is triggered when expected (e.g., a store with no write-back should lead to an mmio exit). Signed-off-by:
-
Ricardo Koller authored
Add some dirty logging tests into page_fault_test. Mark the data and/or page-table memory regions for dirty logging, perform some accesses, and check that the dirty log bits are set or clean when expected. Signed-off-by:
-
Ricardo Koller authored
Add some userfaultfd tests into page_fault_test. Punch holes into the data and/or page-table memslots, perform some accesses, and check that the faults are taken (or not taken) when expected. Signed-off-by:
-
Ricardo Koller authored
Add a new test for stage 2 faults when using different combinations of guest accesses (e.g., write, S1PTW), backing source type (e.g., anon) and types of faults (e.g., read on hugetlbfs with a hole). The next commits will add different handling methods and more faults (e.g., uffd and dirty logging). This first commit starts by adding two sanity checks for all types of accesses: AF setting by the hw, and accessing memslots with holes. Signed-off-by:
-
Ricardo Koller authored
Now that kvm_vm allows specifying different memslots for code, page tables, and data, use the appropriate memslot when making allocations in common/libraty code. Change them accordingly: - code (allocated by lib/elf) use the CODE memslot - stacks, exception tables, and other core data pages (like the TSS in x86) use the DATA memslot - page tables and the PGD use the PT memslot - test data (anything allocated with vm_vaddr_alloc()) uses the TEST_DATA memslot No functional change intended. All allocators keep using memslot #0. Cc: Sean Christopherson <seanjc@google.com> Cc: Andrew Jones <andrew.jones@linux.dev> Signed-off-by:
Sean Christopherson <seanjc@google.com> Reviewed-by:
Andrew Jones <andrew.jones@linux.dev> Signed-off-by:
-
Ricardo Koller authored
Refactor virt_arch_pgd_alloc() and vm_vaddr_alloc() in both RISC-V and aarch64 to fix the alignment of parameters in a couple of calls. This will make it easier to fix the alignment in a future commit that adds an extra parameter (that happens to be very long). No functional change intended. Suggested-by:
-
Ricardo Koller authored
The vm_create() helpers are hardcoded to place most page types (code, page-tables, stacks, etc) in the same memslot #0, and always backed with anonymous 4K. There are a couple of issues with that. First, tests willing to differ a bit, like placing page-tables in a different backing source type must replicate much of what's already done by the vm_create() functions. Second, the hardcoded assumption of memslot #0 holding most things is spread everywhere; this makes it very hard to change. Fix the above issues by having selftests specify how they want memory to be laid out. Start by changing ____vm_create() to not create memslot #0; a test (to come) will specify all memslots used by the VM. Then, add the vm->memslots[] array to specify the right memslot for different memory allocators, e.g.,: lib/elf should use the vm->[MEM_REGION_CODE] memslot. This will be used as a way to specify the page-tables memslots (to be backed by huge pages for example). There is no functional change intended. The current commit lays out memory exactly as before. A future commit will change the allocators to get the region they should be using, e.g.,: like the page table allocators using the pt memslot. Cc: Sean Christopherson <seanjc@google.com> Cc: Andrew Jones <andrew.jones@linux.dev> Signed-off-by:
-
Ricardo Koller authored
Add the backing_src_type into struct userspace_mem_region. This struct already stores a lot of info about memory regions, except the backing source type. This info will be used by a future commit in order to determine the method for punching a hole. Reviewed-by:
Oliver Upton <oliver.upton@linux.dev> Signed-off-by:
-
Ricardo Koller authored
Copy bitfield.h from include/linux/bitfield.h. A subsequent change will make use of some FIELD_{GET,PREP} macros defined in this header. The header was copied as-is, no changes needed. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by:Oliver Upton <oupton@google.com> Signed-off-by:
-
Ricardo Koller authored
Define macros for memory type indexes and construct DEFAULT_MAIR_EL1 with macros from asm/sysreg.h. The index macros can then be used when constructing PTEs (instead of using raw numbers). Reviewed-by:
-
Ricardo Koller authored
Deleting a memslot (when freeing a VM) is not closing the backing fd, nor it's unmapping the alias mapping. Fix by adding the missing close and munmap. Reviewed-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
-
Ricardo Koller authored
Add a library function to get the PTE (a host virtual address) of a given GVA. This will be used in a future commit by a test to clear and check the access flag of a particular page. Reviewed-by:
-
Ricardo Koller authored
Move the generic userfaultfd code out of demand_paging_test.c into a common library, userfaultfd_util. This library consists of a setup and a stop function. The setup function starts a thread for handling page faults using the handler callback function. This setup returns a uffd_desc object which is then used in the stop function (to wait and destroy the threads). Reviewed-by:
-
Reiji Watanabe authored
Currently, the debug-exceptions test always uses only {break,watch}point#0 and the highest numbered context-aware breakpoint. Modify the test to use all {break,watch}points and context-aware breakpoints supported on the system. Signed-off-by:Reiji Watanabe <reijiw@google.com> Signed-off-by:
-
Reiji Watanabe authored
Currently, the debug-exceptions test doesn't have a test case for a linked watchpoint. Add a test case for the linked watchpoint to the test. The new test case uses the highest numbered context-aware breakpoint (for Context ID match), and the watchpoint#0, which is linked to the context-aware breakpoint. Signed-off-by:
-
Reiji Watanabe authored
Currently, the debug-exceptions test doesn't have a test case for a linked breakpoint. Add a test case for the linked breakpoint to the test. The new test case uses a pair of breakpoints. One is the higiest numbered context-aware breakpoint (for Context ID match), and the other one is the breakpoint#0 (for Address Match), which is linked to the context-aware breakpoint. Signed-off-by:
-
Reiji Watanabe authored
Change debug_version() to take the ID_AA64DFR0_EL1 value instead of vcpu as an argument, and change its callsite to read ID_AA64DFR0_EL1 (and pass it to debug_version()). Subsequent patches will reuse the register value in the callsite. No functional change intended. Signed-off-by:
-
Reiji Watanabe authored
Currently, debug-exceptions test unnecessarily tracks some test stages using GUEST_SYNC(). The code for it needs to be updated as test cases are added or removed. Stop doing the unnecessary stage tracking, as they are not so useful and are a bit pain to maintain. Signed-off-by:
-
Reiji Watanabe authored
Add helpers to enable breakpoint and watchpoint exceptions. No functional change intended. Signed-off-by:
-
Reiji Watanabe authored
Remove the hard-coded {break,watch}point #0 from the guest_code() in debug-exceptions to allow {break,watch}point number to be specified. Change reset_debug_state() to zeroing all dbg{b,w}{c,v}r_el0 registers so that guest_code() can use the function to reset those registers even when non-zero {break,watch}points are specified for guest_code(). Subsequent patches will add test cases for non-zero {break,watch}points. Signed-off-by: -
Reiji Watanabe authored
Introduce helpers in the debug-exceptions test to write to dbg{b,w}{c,v}r registers. Those helpers will be useful for test cases that will be added to the test in subsequent patches. No functional change intended. Signed-off-by: -
Reiji Watanabe authored
Use FIELD_GET() macro to extract ID register fields for existing aarch64 selftests code. No functional change intended. Signed-off-by:
-
Gavin Shan authored
The memory area in each slot should be aligned to host page size. Otherwise, the test will fail. For example, the following command fails with the following messages with 64KB-page-size-host and 4KB-pae-size-guest. It's not user friendly to abort the test. Lets do something to report the optimal memory slots, instead of failing the test. # ./memslot_perf_test -v -s 1000 Number of memory slots: 999 Testing map performance with 1 runs, 5 seconds each Adding slots 1..999, each slot with 8 pages + 216 extra pages last ==== Test Assertion Failure ==== lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages pid=19872 tid=19872 errno=0 - Success 1 0x00000000004065b3: vm_userspace_mem_region_add at kvm_util.c:822 2 0x0000000000401d6b: prepare_vm at memslot_perf_test.c:273 3 (inlined by) test_execute at memslot_perf_test.c:756 4 (inlined by) test_loop at memslot_perf_test.c:994 5 (inlined by) main at memslot_perf_test.c:1073 6 0x0000ffff7ebb4383: ?? ??:0 7 0x00000000004021ff: _start at :? Number of guest pages is not compatible with the host. Try npages=16 Report the optimal memory slots instead of failing the test when the memory area in each slot isn't aligned to host page size. With this applied, the optimal memory slots is reported. # ./memslot_perf_test -v -s 1000 Number of memory slots: 999 Testing map performance with 1 runs, 5 seconds each Memslot count too high for this test, decrease the cap (max is 514) Signed-off-by:Gavin Shan <gshan@redhat.com> Reviewed-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by:
-
Gavin Shan authored
The addresses and sizes passed to vm_userspace_mem_region_add() and madvise() should be aligned to host page size, which can be 64KB on aarch64. So it's wrong by passing additional fixed 4KB memory area to various tests. Fix it by passing additional fixed 64KB memory area to various tests. We also add checks to ensure that none of host/guest page size exceeds 64KB. MEM_TEST_MOVE_SIZE is fixed up to 192KB either. With this, the following command works fine on 64KB-page-size-host and 4KB-page-size-guest. # ./memslot_perf_test -v -s 512 Signed-off-by:
-
Gavin Shan authored
The test case is obviously broken on aarch64 because non-4KB guest page size is supported. The guest page size on aarch64 could be 4KB, 16KB or 64KB. This supports variable guest page size, mostly for aarch64. - The host determines the guest page size when virtual machine is created. The value is also passed to guest through the synchronization area. - The number of guest pages are unknown until the virtual machine is to be created. So all the related macros are dropped. Instead, their values are dynamically calculated based on the guest page size. - The static checks on memory sizes and pages becomes dependent on guest page size, which is unknown until the virtual machine is about to be created. So all the static checks are converted to dynamic checks, done in check_memory_sizes(). - As the address passed to madvise() should be aligned to host page, the size of page chunk is automatically selected, other than one page. - MEM_TEST_MOVE_SIZE has fixed and non-working 64KB. It will be consolidated in next patch. However, the comments about how it's calculated has been correct. - All other changes included in this patch are almost mechanical replacing '4096' with 'guest_page_size'. Signed-off-by: -
Gavin Shan authored
prepare_vm() is called in every iteration and run. The allowed memory slots (KVM_CAP_NR_MEMSLOTS) are probed for multiple times. It's not free and unnecessary. Move the probing logic for the allowed memory slots to parse_args() for once, which is upper layer of prepare_vm(). No functional change intended. Signed-off-by:
-
Gavin Shan authored
There are two loops in prepare_vm(), which have different conditions. 'slot' is treated as meory slot index in the first loop, but index of the host virtual address array in the second loop. It makes it a bit hard to understand the code. Change the usage of 'slot' in the second loop, to treat it as the memory slot index either. No functional change intended. Signed-off-by:
-
Gavin Shan authored
In prepare_vm(), 'data->nslots' is assigned with 'max_mem_slots - 1' at the beginning, meaning they are interchangeable. Use 'data->nslots' isntead of 'max_mem_slots - 1'. With this, it becomes easier to move the logic of probing number of slots into upper layer in subsequent patches. No functional change intended. Signed-off-by:
-
- 06 Nov, 2022 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds authored
Pull cxl fixes from Dan Williams: "Several fixes for CXL region creation crashes, leaks and failures. This is mainly fallout from the original implementation of dynamic CXL region creation (instantiate new physical memory pools) that arrived in v6.0-rc1. Given the theme of "failures in the presence of pass-through decoders" this also includes new regression test infrastructure for that case. Summary: - Fix region creation crash with pass-through decoders - Fix region creation crash when no decoder allocation fails - Fix region creation crash when scanning regions to enforce the increasing physical address order constraint that CXL mandates - Fix a memory leak for cxl_pmem_region objects, track 1:N instead of 1:1 memory-device-to-region associations. - Fix a memory leak for cxl_region objects when regions with active targets are deleted - Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window) emulated proximity domains. - Fix region creation failure for switch attached devices downstream of a single-port host-bridge - Fix false positive memory leak of cxl_region objects by recycling recently used region ids rather than freeing them - Add regression test infrastructure for a pass-through decoder configuration - Fix some mailbox payload handling corner cases" * tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/region: Recycle region ids cxl/region: Fix 'distance' calculation with passthrough ports tools/testing/cxl: Add a single-port host-bridge regression config tools/testing/cxl: Fix some error exits cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak cxl/region: Fix cxl_region leak, cleanup targets at region delete cxl/region: Fix region HPA ordering validation cxl/pmem: Use size_add() against integer overflow cxl/region: Fix decoder allocation crash ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA. cxl/region: Fix null pointer dereference due to pass through decoder commit cxl/mbox: Add a check on input payload size -
Linus Torvalds authored
Merge tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix two regressions: - Commit 54cc3dbf ("hwmon: (pmbus) Add regulator supply into macro") resulted in regulator undercount when disabling regulators. Revert it. - The thermal subsystem rework caused the scmi driver to no longer register with the thermal subsystem because index values no longer match. To fix the problem, the scmi driver now directly registers with the thermal subsystem, no longer through the hwmon core" * tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: Revert "hwmon: (pmbus) Add regulator supply into macro" hwmon: (scmi) Register explicitly with Thermal Framework
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Add Cooper Lake's stepping to the PEBS guest/host events isolation fixed microcode revisions checking quirk - Update Icelake and Sapphire Rapids events constraints - Use the standard energy unit for Sapphire Rapids in RAPL - Fix the hw_breakpoint test to fail more graciously on !SMP configs * tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[] perf/x86/intel: Fix pebs event constraints for SPR perf/x86/intel: Fix pebs event constraints for ICL perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain perf/hw_breakpoint: test: Skip the test if dependencies unmet
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Add new Intel CPU models - Enforce that TDX guests are successfully loaded only on TDX hardware where virtualization exception (#VE) delivery on kernel memory is disabled because handling those in all possible cases is "essentially impossible" - Add the proper include to the syscall wrappers so that BTF can see the real pt_regs definition and not only the forward declaration * tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add several Intel server CPU model numbers x86/tdx: Panic on bad configs that #VE on "private" memory access x86/tdx: Prepare for using "INFO" call for a second purpose x86/syscall: Include asm/ptrace.h in syscall_wrapper header
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Use POSIX-compatible grep options - Document git-related tips for reproducible builds - Fix a typo in the modpost rule - Suppress SIGPIPE error message from gcc-ar and llvm-ar - Fix segmentation fault in the menuconfig search * tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: fix segmentation fault in menuconfig search kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar kbuild: fix typo in modpost Documentation: kbuild: Add description of git for reproducible builds kbuild: use POSIX-compatible grep option
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Fix the pKVM stage-1 walker erronously using the stage-2 accessor - Correctly convert vcpu->kvm to a hyp pointer when generating an exception in a nVHE+MTE configuration - Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them - Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE - Document the boot requirements for FGT when entering the kernel at EL1 x86: - Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit() - Make argument order consistent for kvcalloc() - Userspace API fixes for DEBUGCTL and LBRs" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix a typo about the usage of kvcalloc() KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit() KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl() KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs arm64: booting: Document our requirements for fine grained traps with SME KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them KVM: arm64: Fix bad dereference on MTE-enabled systems KVM: arm64: Use correct accessor to parse stage-1 PTEs -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "One fix for silencing a smatch warning, and a small cleanup patch" * tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: simplify sysenter and syscall setup x86/xen: silence smatch warning in pmu_msr_chk_emulated()
-
