Convert current looping-based implementation into bit operation,
which can bring improvement for:

1) bitops is more efficient for its arch-level optimization.

2) Given that blksize_bits() is inline, _if_ @size is compile-time
constant, it's possible that order_base_2() _may_ make output
compile-time evaluated, depending on code context and compiler behavior.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/TYCP286MB23238842958D7C083D6B67CECA349@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COMSigned-off-by: Jens Axboe <axboe@kernel.dk>

David Jeffery found one double ->queue_rq() issue, so far it can
be triggered in VM use case because of long vmexit latency or preempt
latency of vCPU pthread or long page fault in vCPU pthread, then block
IO req could be timed out before queuing the request to hardware but after
calling blk_mq_start_request() during ->queue_rq(), then timeout handler
may handle it by requeue, then double ->queue_rq() is caused, and kernel
panic.

So far, it is driver's responsibility to cover the race between timeout
and completion, so it seems supposed to be solved in driver in theory,
given driver has enough knowledge.

But it is really one common problem, lots of driver could have similar
issue, and could be hard to fix all affected drivers, even it isn't easy
for driver to handle the race. So David suggests this patch by draining
in-progress ->queue_rq() for solving this issue.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: virtualization@lists.linux-foundation.org
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221026051957.358818-1-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This patch removes a conditional jump from get_max_segment_size(). The
x86-64 assembler code for this function without this patch is as follows:

206             return min_not_zero(mask - offset + 1,
   0x0000000000000118 <+72>:    not    %rax
   0x000000000000011b <+75>:    and    0x8(%r10),%rax
   0x000000000000011f <+79>:    add    $0x1,%rax
   0x0000000000000123 <+83>:    je     0x138 <bvec_split_segs+104>
   0x0000000000000125 <+85>:    cmp    %rdx,%rax
   0x0000000000000128 <+88>:    mov    %rdx,%r12
   0x000000000000012b <+91>:    cmovbe %rax,%r12
   0x000000000000012f <+95>:    test   %rdx,%rdx
   0x0000000000000132 <+98>:    mov    %eax,%edx
   0x0000000000000134 <+100>:   cmovne %r12d,%edx

With this patch applied:

206             return min(mask - offset, (unsigned long)lim->max_segment_size - 1) + 1;
   0x000000000000003f <+63>:    mov    0x28(%rdi),%ebp
   0x0000000000000042 <+66>:    not    %rax
   0x0000000000000045 <+69>:    and    0x8(%rdi),%rax
   0x0000000000000049 <+73>:    sub    $0x1,%rbp
   0x000000000000004d <+77>:    cmp    %rbp,%rax
   0x0000000000000050 <+80>:    cmova  %rbp,%rax
   0x0000000000000054 <+84>:    add    $0x1,%eax
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-4-bvanassche@acm.orgReviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Document which functions do not modify the queue limits.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-3-bvanassche@acm.orgReviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit c75e707f ("block: remove the per-bio/request write hint")
removed all code that uses the struct request write_hint member. Hence
also remove 'write_hint' itself.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-2-bvanassche@acm.orgReviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio_start_io_acct_time is not actually used anywhere, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221025155916.270303-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Now that blk_mq_destroy_queue does not release the queue reference, there
is no need for a second admin queue reference to be held by the
apple_nvme structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Now that blk_mq_destroy_queue does not release the queue reference, there
is no need for a second admin queue reference to be held by the nvme_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Now that blk_mq_destroy_queue does not release the queue reference, there
is no need for a second queue reference to be held by the scsi_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The fact that blk_mq_destroy_queue also drops a queue reference leads
to various places having to grab an extra reference.  Move the call to
blk_put_queue into the callers to allow removing the extra references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-2-hch@lst.de
[axboe: fix fabrics_q vs admin_q conflict in nvme core.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The current reference management logic of io scheduler modules contains
refcnt problems. For example, blk_mq_init_sched may fail before or after
the calling of e->ops.init_sched. If it fails before the calling, it does
nothing to the reference to the io scheduler module. But if it fails after
the calling, it releases the reference by calling kobject_put(&eq->kobj).

As the callers of blk_mq_init_sched can't know exactly where the failure
happens, they can't handle the reference to the io scheduler module
properly: releasing the reference on failure results in double-release if
blk_mq_init_sched has released it, and not releasing the reference results
in ghost reference if blk_mq_init_sched did not release it either.

The same problem also exists in io schedulers' init_sched implementations.

We can address the problem by adding releasing statements to the error
handling procedures of blk_mq_init_sched and init_sched implementations.
But that is counterintuitive and requires modifications to existing io
schedulers.

Instead, We make elevator_alloc get the io scheduler module references
that will be released by elevator_release. And then, we match each
elevator_get with an elevator_put. Therefore, each reference to an io
scheduler module explicitly has its own getter and releaser, and we no
longer need to worry about the refcnt problems.

The bugs and the patch can be validated with tools here:
https://github.com/nickyc975/linux_elv_refcnt_bug.git

[hch: split out a few bits into separate patches, use a non-try
      module_get in elevator_alloc]
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

No need to find the actual elevator_type struct for this comparism,
the name is all that is needed.
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The stripped name should also be used for the none check.  To do so
strip it in the caller and pass in the sanitized name.  Drop the pointless
__ prefix in the function name while we're at it.

Based on a patch from Jinlong Chen <nickyc975@zju.edu.cn>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Make sure we have helpers for all relevant module refcount operations on
the elevator_type in elevator.h, and use them.  Move the call to the get
helper in blk_mq_elv_switch_none a bit so that it is obvious with a less
verbose comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit b5dc5d4d ("block,bfq: Disable writeback throttling") tries to
disable wbt for bfq, it's done by calling wbt_disable_default() in
bfq_init_queue(). However, wbt is still enabled if default elevator is
bfq:

device_add_disk
 elevator_init_mq
  bfq_init_queue
   wbt_disable_default -> done nothing

 blk_register_queue
  wbt_enable_default -> wbt is enabled

Fix the problem by adding a new flag ELEVATOR_FLAG_DISBALE_WBT, bfq
will set the flag in bfq_init_queue, and following wbt_enable_default()
won't enable wbt while the flag is set.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-7-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

There are only one flag to indicate that elevator is registered currently,
prepare to add a flag to disable wbt if default elevator is bfq.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-6-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Currently, if wbt is initialized and then disabled by
wbt_disable_default(), sysfs will still show valid wbt_lat_usec, which
will confuse users that wbt is still enabled.

This patch shows wbt_lat_usec as zero if it's disabled.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reported-and-tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-5-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Currently, if user disable wbt through sysfs, 'enable_state' will be
'WBT_STATE_ON_MANUAL', which will be confusing. Add a new state
'WBT_STATE_OFF_MANUAL' to cover that case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-4-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

If CONFIG_BLK_WBT_MQ is disabled, wbt_init() won't do anything.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019121518.3865235-3-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

"elevator_queue *e" is already declared and initialized in the beginning
of elv_unregister_queue().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221019121518.3865235-2-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

'ioc->params' is updated in ioc_refresh_params(), which is proteced by
'ioc->lock', however, ioc_timer_fn() read params outside the lock.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-5-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This won't cause any severe problem currently, however, this doesn't
seems appropriate:

1) 'ioc->params' is read from multiple places without holding
'ioc->lock', unexpected value might be read if writing it concurrently.

2) If configuration is changed while io is throttling, the functionality
might be affected. For example, if module params is updated and cost
becomes smaller, waiting for timer that is caculated under old
configuration is not appropriate.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-4-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

ioc_qos_write() and ioc_cost_model_write() are the same:

1) hold lock to read 'ioc->params' to local variable;
2) update params to local variable without lock;
3) hold lock to write local variable to 'ioc->params';

In theroy, if user updates params concurrenty, the params might be lost:

t1: update params a		t2: update params b
spin_lock_irq(&ioc->lock);
memcpy(qos, ioc->params.qos, sizeof(qos))
spin_unlock_irq(&ioc->lock);

qos[a] = xxx;

				spin_lock_irq(&ioc->lock);
				memcpy(qos, ioc->params.qos, sizeof(qos))
				spin_unlock_irq(&ioc->lock);

				qos[b] = xxx;

spin_lock_irq(&ioc->lock);
memcpy(ioc->params.qos, qos, sizeof(qos));
ioc_refresh_params(ioc, true);
spin_unlock_irq(&ioc->lock);

				spin_lock_irq(&ioc->lock);
				// updates of a will be lost
				memcpy(ioc->params.qos, qos, sizeof(qos));
				ioc_refresh_params(ioc, true);
				spin_unlock_irq(&ioc->lock);

Althrough this is not common case, the problem can by fixed easily by
holding the lock through the read, update, write process.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-3-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit b5dc5d4d ("block,bfq: Disable writeback throttling") disable
wbt for bfq, because different write-throttling heuristics should not
work together.

For the same reason, wbt and iocost should not work together as well,
unless admin really want to do that, dispite that performance is
affected.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221012094035.390056-2-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull kvm fixes from Paolo Bonzini:
 "RISC-V:

   - Fix compilation without RISCV_ISA_ZICBOM

   - Fix kvm_riscv_vcpu_timer_pending() for Sstc

  ARM:

   - Fix a bug preventing restoring an ITS containing mappings for very
     large and very sparse device topology

   - Work around a relocation handling error when compiling the nVHE
     object with profile optimisation

   - Fix for stage-2 invalidation holding the VM MMU lock for too long
     by limiting the walk to the largest block mapping size

   - Enable stack protection and branch profiling for VHE

   - Two selftest fixes

  x86:

   - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl

  selftests:

   - synchronize includes between include/uapi and tools/include/uapi"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools: include: sync include/api/linux/kvm.h
  KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
  KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
  kvm: Add support for arch compat vm ioctls
  RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
  RISC-V: Fix compilation without RISCV_ISA_ZICBOM
  KVM: arm64: vgic: Fix exit condition in scan_its_table()
  KVM: arm64: nvhe: Fix build with profile optimization
  KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
  KVM: arm64: selftests: Fix multiple versions of GIC creation
  KVM: arm64: Enable stack protection and branch profiling for VHE
  KVM: arm64: Limit stage2_apply_range() batch size to largest block
  KVM: arm64: Work out supported block level at compile time

This reverts commit 72a95859.

It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver.  Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.

Fixes: 72a95859 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.

Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c.  But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes: bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Borislav Petkov:

 - Fix raw data handling when perf events are used in bpf

 - Rework how SIGTRAPs get delivered to events to address a bunch of
   problems with it. Add a selftest for that too

* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bpf: Fix sample_flags for bpf_perf_event_output
  selftests/perf_events: Add a SIGTRAP stress test with disables
  perf: Fix missing SIGTRAPs

Pull scheduler fixes from Borislav Petkov:

 - Adjust code to not trip up CFI

 - Fix sched group cookie matching

* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Introduce struct balance_callback to avoid CFI mismatches
  sched/core: Fix comparison in sched_group_cookie_match()

Pull objtool fix from Borislav Petkov:

 - Fix ORC stack unwinding when GCOV is enabled

* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix unreliable stack dump with gcov

Pull x86 fixes from Borislav Petkov:
 "As usually the case, right after a major release, the tip urgent
  branches accumulate a couple more fixes than normal. And here is the
  x86, a bit bigger, urgent pile.

   - Use the correct CPU capability clearing function on the error path
     in Intel perf LBR

   - A CFI fix to ftrace along with a simplification

   - Adjust handling of zero capacity bit mask for resctrl cache
     allocation on AMD

   - A fix to the AMD microcode loader to attempt patch application on
     every logical thread

   - A couple of topology fixes to handle CPUID leaf 0x1f enumeration
     info properly

   - Drop a -mabi=ms compiler option check as both compilers support it
     now anyway

   - A couple of fixes to how the initial, statically allocated FPU
     buffer state is setup and its interaction with dynamic states at
     runtime"

* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
  perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
  ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
  x86/ftrace: Remove ftrace_epilogue()
  x86/resctrl: Fix min_cbm_bits for AMD
  x86/microcode/AMD: Apply the patch early on every logical thread
  x86/topology: Fix duplicated core ID within a package
  x86/topology: Fix multiple packages shown on a single-package system
  hwmon/coretemp: Handle large core ID value
  x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
  x86/fpu: Exclude dynamic states from init_fpstate
  x86/fpu: Fix the init_fpstate size check with the actual size
  x86/fpu: Configure init_fpstate attributes orderly

Pull io_uring follow-up from Jens Axboe:
 "Currently the zero-copy has automatic fallback to normal transmit, and
  it was decided that it'd be cleaner to return an error instead if the
  socket type doesn't support it.

  Zero-copy does work with UDP and TCP, it's more of a future proofing
  kind of thing (eg for samba)"

* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
  io_uring/net: fail zc sendmsg when unsupported by socket
  io_uring/net: fail zc send when unsupported by socket
  net: flag sockets supporting msghdr originated zerocopy

Merge tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - corsair-psu: Fix typo in USB id description, and add USB ID for new
   PSU

 - pwm-fan: Fix fan power handling when disabling fan control

* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (corsair-psu) Add USB id of the new HX1500i psu
  hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
  hwmon: (corsair-psu) fix typo in USB id description

Pull i2c fixes from Wolfram Sang:
 "RPM fix for qcom-cci, platform module alias for xiic, build warning
  fix for mlxbf, typo fixes in comments"

* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxbf: depend on ACPI; clean away ifdeffage
  i2c: fix spelling typos in comments
  i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
  i2c: xiic: Add platform module alias

Pull pci fixes from Bjorn Helgaas:

 - Revert a simplification that broke pci-tegra due to a masking error

 - Update MAINTAINERS for Kishon's email address change and TI
   DRA7XX/J721E maintainer change

* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
  MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
  Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"

Pull missed media updates from Mauro Carvalho Chehab:
 "It seems I screwed-up my previous pull request: it ends up that only
  half of the media patches that were in linux-next got merged in -rc1.

  The script which creates the signed tags silently failed due to
  5.19->6.0 so it ended generating a tag with incomplete stuff.

  So here are the missing parts:

   - a DVB core security fix

   - lots of fixes and cleanups for atomisp staging driver

   - old drivers that are VB1 are being moved to staging to be
     deprecated

   - several driver updates - mostly for embedded systems, but there are
     also some things addressing issues with some PC webcams, in the UVC
     video driver"

* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
  media: sun6i-csi: Move csi buffer definition to main header file
  media: sun6i-csi: Introduce and use video helper functions
  media: sun6i-csi: Add media ops with link notify callback
  media: sun6i-csi: Remove controls handler from the driver
  media: sun6i-csi: Register the media device after creation
  media: sun6i-csi: Pass and store csi device directly in video code
  media: sun6i-csi: Tidy up video code
  media: sun6i-csi: Tidy up v4l2 code
  media: sun6i-csi: Tidy up Kconfig
  media: sun6i-csi: Use runtime pm for clocks and reset
  media: sun6i-csi: Define and use variant to get module clock rate
  media: sun6i-csi: Always set exclusive module clock rate
  media: sun6i-csi: Tidy up platform code
  media: sun6i-csi: Refactor main driver data structures
  media: sun6i-csi: Define and use driver name and (reworked) description
  media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  ...

The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>