Lifetime of some of the devlink objects, like regions, is currently
forced to be different for devlink instance and devlink port instance
(per-port regions). The reason is that for devlink ports, the internal
structures initialization happens only after devlink_port_register() is
called.

To resolve this inconsistency, introduce new set of helpers to allow
driver to initialize devlink pointer and region list before
devlink_register() is called. That allows port regions to be created
before devlink port registration and destroyed after devlink
port unregistration.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of relying on devlink pointer not being initialized, introduce
an extra flag to indicate if devlink port is registered. This is needed
as later on devlink pointer is going to be initialized even in case
devlink port is not registered yet.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of checking devlink_port->devlink pointer for not being NULL
which indicates that devlink port is registered, put this check to new
pair of helpers similar to what we have for devlink and use them in
other functions.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

rtl_disable_rxdvgate() is used for disable RXDV_GATE. It is opposite function
of rtl_enable_rxdvgate().

Disable RXDV_GATE does not have to delay. So in this patch, also remove the
delay after disale RXDV_GATE.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20220928171356.3951-1-hau@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
bluetooth-next pull request for net-next

 - Add RTL8761BUV device (Edimax BT-8500)
 - Add a new PID/VID 13d3/3583 for MT7921
 - Add Realtek RTL8852C support ID 0x13D3:0x3592
 - Add VID/PID 0489/e0e0 for MediaTek MT7921
 - Add a new VID/PID 0e8d/0608 for MT7921
 - Add a new PID/VID 13d3/3578 for MT7921
 - Add BT device 0cb8:c549 from RTW8852AE
 - Add support for Intel Magnetor

* tag 'for-net-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (49 commits)
  Bluetooth: hci_sync: Fix not indicating power state
  Bluetooth: L2CAP: Fix user-after-free
  Bluetooth: Call shutdown for HCI_USER_CHANNEL
  Bluetooth: Prevent double register of suspend
  Bluetooth: hci_core: Fix not handling link timeouts propertly
  Bluetooth: hci_event: Make sure ISO events don't affect non-ISO connections
  Bluetooth: hci_debugfs: Fix not checking conn->debugfs
  Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
  Bluetooth: MGMT: fix zalloc-simple.cocci warnings
  Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure
  Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works
  Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
  Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release
  Bluetooth: hci_sync: allow advertise when scan without RPA
  Bluetooth: btusb: Add a new VID/PID 0e8d/0608 for MT7921
  Bluetooth: btusb: Add a new PID/VID 13d3/3583 for MT7921
  Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev()
  Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk
  Bluetooth: btintel: Add support for Magnetor
  Bluetooth: btusb: Add a new PID/VID 13d3/3578 for MT7921
  ...
====================

Link: https://lore.kernel.org/r/20221001004602.297366-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 9c5d03d3 ("genetlink: start to validate reserved header bytes")
introduced extra validation for genetlink headers. We had to gate it
to only apply to new commands, to maintain bug-wards compatibility.
Use this opportunity (before the new checks make it to Linus's tree)
to add more conditions.

Validate that Generic Netlink families do not use nlmsg_flags outside
of the well-understood set.

Link: https://lore.kernel.org/all/20220928073709.1b93b74a@kernel.org/Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20220929142809.1167546-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When setting power state using legacy/non-mgmt API
(e.g hcitool hci0 up) the likes of mgmt_set_powered_complete won't be
called causing clients of the MGMT API to not be notified of the change
of the state.

Fixes: cf75ad8b ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>

Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.1

Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.

Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.

Major changes:

mac80211

 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
  feature continues

brcmfmac

 - support CYW43439 SDIO chipset

 - support BCM4378 on Apple platforms

 - support CYW89459 PCIe chipset

rtw89

 - more work to get rtw8852c supported

 - P2P support

 - support for enabling and disabling MSDU aggregation via nl80211

mt76

 - tx status reporting improvements

ath11k

 - cold boot calibration support on WCN6750

 - Target Wake Time (TWT) debugfs support for STA interface

 - support to connect to a non-transmit MBSSID AP profile

 - enable remain-on-channel support on WCN6750

 - implement SRAM dump debugfs interface

 - enable threaded NAPI on all hardware

 - WoW support for WCN6750

 - support to provide transmit power from firmware via nl80211

 - support to get power save duration for each client

 - spectral scan support for 160 MHz

wcn36xx

 - add SNR from a received frame as a source of system entropy

* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
  wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
  wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
  wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
  wifi: rtw89: 8852b: configure DLE mem
  wifi: rtw89: check DLE FIFO size with reserved size
  wifi: rtw89: mac: correct register of report IMR
  wifi: rtw89: pci: set power cut closed for 8852be
  wifi: rtw89: pci: add to do PCI auto calibration
  wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
  wifi: rtw89: add DMA busy checking bits to chip info
  wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
  wifi: rtw89: pci: mask out unsupported TX channels
  iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
  ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  wifi: iwlwifi: Track scan_cmd allocation size explicitly
  brcmfmac: Remove the call to "dtim_assoc" IOVAR
  brcmfmac: increase dcmd maximum buffer size
  brcmfmac: Support 89459 pcie
  brcmfmac: increase default max WOWL patterns to 16
  cw1200: fix incorrect check to determine if no element is found in list
  ...
====================

Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 xsk updates part2 2022-09-28

XSK buffer improvements, This is part #2 of 4 parts series.

 1) Expose xsk min chunk size to drivers, to allow the driver to adjust to a
   better buffer stride size

 2) Adjust MTT page size to the XSK frame size, to avoid umem overrun in
  certain situations.

 3) Use xsk frame size as the striding RQ page size for XSK RQs

 4) KSM for unaligned XSK, KSM allows arbitrary buffer chunk lengths
    registration in HW, which makes more sense for unaligned XSK.

 4) More cleanups and optimizations in preparation for next improvements
    in part3

part 1: https://lore.kernel.org/netdev/20220927203611.244301-1-saeed@kernel.org/
====================

Link: https://lore.kernel.org/r/20220929072156.93299-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Although mlx5e_rq_free_shampo can be called unconditionally, it belongs
to case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ. Move it there to allow to
add more init/cleanup actions to the striding RQ case.

If xdp_rxq_info_reg_mem_model fails, don't forget to destroy the page
pool.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The same clear_bit is called in both error and success flows. Move the
call to do it only once and remove the out label.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To decrease the nesting level and reduce duplication of code, create
functions to redirect direct RQTs to the actual RQs or drop_rq, which
are used in the activation and deactivation flows of channels.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5e_xsk_page_alloc_pool became a thin wrapper around xsk_buff_alloc.
Drop it and call xsk_buff_alloc directly.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

struct mlx5e_alloc_unit consists of a single union. Convert it to a
union itself to simplify casting it to struct xdp_buff *, which will be
used to implement XSK batching on striding RQ.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5e_alloc_unit stores the DMA address and a pointer to either struct
page (regular RQ) or struct xdp_buff (XSK RQ). This DMA address is
redundant, because when a page or an XSK frame is allocated, the same
address is also stored there. Some flows take the address from struct
mlx5e_alloc_unit, and some take it from struct page or xdp_buff.

This commit removes the address from struct mlx5e_alloc_unit, which
makes it twice as small and improves locality (this struct is used in an
array), also saving on unnecessary stores to the addr field. Almost all
flows know unambiguously whether the DMA address should be taken from
page or from xdp_buff. The exception is the allocation flows, where a
new branch appeared, which will be optimized out in the next commits.

struct mlx5e_alloc_unit used to be called mlx5e_dma_info.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The next commit will remove the DMA address from the struct currently
called mlx5e_dma_info, because the same value can be retrieved with
page_pool_get_dma_addr(page) in almost all cases, with the notable
exception of SHAMPO (HW GRO implementation) that modifies this address
on the fly, after the initial allocation.

To keep the SHAMPO logic intact, struct mlx5e_dma_info remains in the
SHAMPO code, consisting of addr and page (XSK is not compatible with
SHAMPO). The struct used in all other places is renamed to
mlx5e_alloc_unit, allowing the next commit to remove the addr field
without affecting SHAMPO.

The new name means "allocation unit", and it's more appropriate after
the field with the DMA address gets removed.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

RX page cache stores dma_info structs, that consist of a pointer to
struct page and a DMA address. In fact, the DMA address is extracted
from struct page using page_pool_get_dma_addr when a page is pushed to
the cache. By moving this call to the point when a page is popped from
the cache, we can avoid storing the DMA address in the cache,
effectively reducing its size by two times without losing any
functionality.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

WQEs must not cross page boundaries, they are padded with NOPs if they
don't fit the page. mlx5e_mpwrq_total_umr_wqebbs doesn't take into
account this padding, risking reserving not enough space.

The padding is not straightforward to add to this calculation, because
WQEs of different sizes may be mixed together in the queue. If each page
ends with a big WQE that doesn't fit and requires at most its size minus
1 WQEBB of padding, the total space can be much bigger than in case when
smaller WQEs take advantage of this padding.

Replace the wrong exact calculation by the following estimation. Each
padding can be at most the size of the maximum WQE used in the queue
minus one WQEBB. Let's call the rest of the page "useful space". If we
divide the total size of all needed WQEs by this useful space, rounding
up, we'll get the number of pages, which is enough to contain all these
WQEs. It's correct, because every WQE that appeared on the boundary
between two blocks of useful space would start in the useful space of
one page and end in the padding of the same page, while our estimation
reserved space for its tail in the next space, making the estimation not
smaller than the real space occupied in the queue.

The code actually uses a looser estimation: instead of taking the
maximum size of all used WQE types minus 1 WQEBB, it takes the maximum
hardware size of a WQE. It's made for simplicity and extensibility.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The previous commit removed the last usage of xsk_buff_discard in mlx5e,
so the function that is no longer used can be removed.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
CC: "Björn Töpel" <bjorn@kernel.org>
CC: Magnus Karlsson <magnus.karlsson@intel.com>
CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

UMR MTTs used in striding RQ have certain alignment requirements. While
it's guaranteed to work when UMR pages are aligned to the UMR page size,
in practice it works then UMR pages are aligned to 8 bytes. However,
it's still not enough flexibility for the unaligned mode of XSK. This
patch leverages KSM to map UMR pages without alignment requirements,
when unaligned XSK is active. The downside is that KSM entries are twice
as big as MTTs, which limits the maximum WQE size, so regular RQs and
aligned XSK continue using MTTs.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Some commands use a flexible array after a common header. Add a macro to
safely calculate the total input length of the command, detecting
overflows and printing errors with specific values when such overflows
happen.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, rq->mkey_be keeps a big-endian value of either the PA MKey
(for legacy RQ, no address translation) or MTT MKey (for striding RQ,
direct address translation). Striding RQ stores the same value in
rq->umr_mkey in the native endianness.

The next commit will make striding RQ use KSM MKey (indirect address
translation) for the unaligned mode of XSK, which will require storing
both KSM MKey and PA MKey in the RQ struct. This commit optimizes fields
of mlx5e_rq: umr_mkey is removed (it's redundant), mkey_be always points
to the PA MKey, and mpwqe.umr_mkey_be points to the MTT MKey (or to the
KSM MKey, starting from the next commit).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

XSK RQs support striding RQ linear mode, but the stride size is always
set to PAGE_SIZE. It may be larger than the XSK frame size,
unnecessarily reducing the useful space in a WQE, but more importantly
causing UMEM data corruption in certain cases.

Normally, stride size bigger than XSK frame size is not a problem if the
hardware enforces the MTU. However, traffic between vports skips the
hardware MTU check, and oversized packets may be received.

If an oversized packet is bigger than the XSK frame but not bigger than
the stride, it will cause overwriting of the adjacent UMEM region. If
the packet takes more than one stride, they can be recycled for reuse
so it's not a problem when the XSK frame size matches the stride size.

To reduce the impact of the above issue, attempt to use the MTT page
size for striding RQ that matches the XSK frame size, allowing to safely
use 2048-byte frames on an up-to-date firmware.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This commit allows striding RQ to determine MTT page size at runtime,
instead of sticking to the compile-time PAGE_SIZE. This functionality
will be used by a following commit that adjusts the MTT page size to the
XSK frame size.

Stick with PAGE_SIZE for XSK on legacy RQ, as frag_stride is not used in
data path, it only helps calculate how pages are partitioned into
fragments, and PAGE_SIZE will ensure each fragment starts at the
beginning of a new allocation unit (XSK frame).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Drivers should be aware of the range of valid UMEM chunk sizes to be
able to allocate their internal structures of an appropriate size. It
will be used by mlx5e in the following patches.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
CC: "Björn Töpel" <bjorn@kernel.org>
CC: Magnus Karlsson <magnus.karlsson@intel.com>
CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There should be no space before the comma
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jianguo Zhang says:

====================
Mediatek ethernet patches for mt8188

Changes in v7:

v7:
1) Add 'Reviewed-by: AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>' info in commit message of
patch 'dt-bindings: net: snps,dwmac: add new property snps,clk-csr',
'arm64: dts: mediatek: mt2712e: Update the name of property 'clk_csr''
and 'net: stmmac: add a parse for new property 'snps,clk-csr''.

v6:
1) Update commit message of patch 'dt-bindings: net: snps,dwmac: add new property snps,clk-csr'
2) Add a parse for new property 'snps,clk-csr' in patch
'net: stmmac: add a parse for new property 'snps,clk-csr''

v5:
1) Rename the property 'clk_csr' as 'snps,clk-csr' in binding
file as Krzysztof Kozlowski'comment.
2) Add DTS patch 'arm64: dts: mediatek: mt2712e: Update the name of property 'clk_csr''
as Krzysztof Kozlowski'comment.
3) Add driver patch 'net: stmmac: Update the name of property 'clk_csr''
as Krzysztof Kozlowski'comment.

v4:
1) Update the commit message of patch 'dt-bindings: net: snps,dwmac: add clk_csr property'
as Krzysztof Kozlowski'comment.

v3:
1) List the names of SoCs mt8188 and mt8195 in correct order as
AngeloGioacchino Del Regno's comment.
2) Add patch version info as Krzysztof Kozlowski'comment.

v2:
1) Delete patch 'stmmac: dwmac-mediatek: add support for mt8188' as
Krzysztof Kozlowski's comment.
2) Update patch 'dt-bindings: net: mediatek-dwmac: add support for
mt8188' as Krzysztof Kozlowski's comment.
3) Add clk_csr property to fix warning ('clk_csr' was unexpected) when
runnig 'make dtbs_check'.

v1:
1) Add ethernet driver entry for mt8188.
2) Add binding document for ethernet on mt8188.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Parse new property 'snps,clk-csr' firstly because the new property
is documented in binding file, if failed, fall back to old property
'clk_csr' for legacy case
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the name of property 'clk_csr' as 'snps,clk-csr' to align with
the property name in the binding file.
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add description for new property snps,clk-csr in binding file
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add binding document for the ethernet on mt8188
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a devlink_health_report message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a literal string in the array
bnad_net_stats_strings. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement channel management functions to allow dynamic addition and
removal of transmit queues. The `ethtool --show-channels` and
`ethtool --set-channels` commands can be used to get and set the
number of queues, respectively. Allow the ability to add as many
transmit queues as available processors but never allow more than the
hard maximum of 16. The number of receive queues is one and cannot be
modified.

Depending on whether the requested number of queues is larger or
smaller than the current value, either allocate or free long term
buffers. Since long term buffer construction and destruction can
occur in two different areas, from either channel set requests or
device open/close, define functions for performing this work. If
allocation of a new buffer fails, then attempt to revert back to the
previous number of queues.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The `ndo_start_xmit` function is protected by a spinlock on the tx queue
being used to transmit the skb. Allow concurrent calls to
`ndo_start_xmit` by using more than one tx queue. This allows for
greater throughput when several jobs are trying to transmit data.

Introduce 16 tx queues (leave single rx queue as is) which each
correspond to one DMA mapped long term buffer.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than DMA mapping and unmapping every outgoing skb, copy the skb
into a buffer that was mapped during the drivers open function. Copying
the skb and its frags have proven to be more time efficient than
mapping and unmapping. As an effect, performance increases by 3-5
Gbits/s.

Allocate and DMA map one continuous 64KB buffer at `ndo_open`. This
buffer is maintained until `ibmveth_close` is called. This buffer is
large enough to hold the largest possible linnear skb. During
`ndo_start_xmit`, copy the skb and all of it's frags into the continuous
buffer. By manually linnearizing all the socket buffers, time is saved
during memcpy as well as more efficient handling in FW.
As a result, we no longer need to worry about the firmware limitation
of handling a max of 6 frags. So, we only need to maintain 1 descriptor
instead of 6 and can hardcode 0 for the other 5 descriptors during
h_send_logical_lan.

Since, DMA allocation/mapping issues can no longer arise in xmit
functions, we can further reduce code size by removing the need for a
bounce buffer on DMA errors.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are spelling mistakes in two literal strings. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As 2.5G, 5G ethernet ports are more common and affordable,
these ports are being used in LAN bridge devices.
STP port_cost() is missing path_cost assignment for these link speeds,
causes highest cost 100 being used.
This result in lower speed port being picked
when there is loop between 5G and 1G ports.

Original path_cost: 10G=2, 1G=4, 100m=19, 10m=100
Adjusted path_cost: 10G=2, 5G=3, 2.5G=4, 1G=5, 100m=19, 10m=100
                    speed greater than 10G = 1
Signed-off-by: Steven Hsieh <steven.hsieh@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a netdev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>