- 19 Apr, 2020 40 commits
-
-
Jonathan Cameron authored
regmap_bulk_read takes a void * for its val parameter. It certainly makes no sense to cast to a (u8 *) + no need to explicitly cast at all when converting another pointer type to void *. Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com>
-
Lorenzo Bianconi authored
st_lsm6dsx is a standalone driver for STM IMU sensors and does not rely on st_sensor common framework, so it does not include st_sensor common definitions. In st_lsm6dsx_shub driver st_sensors.h is used just to introduce the default wai address for LIS3MDL sensor. Drop this largely unconnected include file and introduce the default wai address for LIS3MDL in st_lsm6dsx_ext_dev_settings register map Reviewed-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. This is the last user of 'devm_iio_device_match()', so it can be removed as well in this patch. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
Moves this to be the first check, as it's very simple and fails the registration earlier, instead of potentially initializing the 'indio_dev->label' and checking for duplicate indexes, and then failing with this simple-check. This is a minor optimization, since '__iio_device_register()' will waste fewer validation cycles in case 'indio_dev->info' is NULL. Signed-off-by:
-
Alexandru Ardelean authored
This field doesn't seem used. It seems that only 'buffer->attrs' was ever used to extend sysfs attributes for an IIO buffer. Moving forward, it may not make sense to keep it. This patch removes the field and it's initialization code. Since we want to rework IIO buffer, to be able to add more buffers per IIO device, we will merge [somehow] the 'buffer' & 'scan_elements' groups, and we will continue to add the attributes to the 'buffer' group. Removing it here, will also make the rework here a bit smaller, since this code will not be present. Signed-off-by:
-
Christophe JAILLET authored
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'. Fixes: 1fd45670 ("iio: imu: adis: add support product ID check in adis_initial_startup") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Lars-Peter Clausen authored
Fix a typo. 'at the a time' -> 'at a time'. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Johan Jonker authored
The description below is already in use for px30.dtsi, but was somehow never added to a document, so add "rockchip,px30-saradc", "rockchip,rk3399-saradc" for saradc nodes on a px30 platform to rockchip-saradc.yaml. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Jonker authored
The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-saradc", "rockchip,rk3399-saradc" for saradc nodes on a rk3308 platform to rockchip-saradc.yaml. Signed-off-by:
-
Johan Jonker authored
Current dts files with 'saradc' nodes are manually verified. In order to automate this process rockchip-saradc.txt has to be converted to yaml. Signed-off-by:
-
Lars-Peter Clausen authored
The IIO DMA buffer is a DMA buffer implementation. As such it should include buffer_impl.h rather than buffer.h. The include to buffer.h in buffer-dma.h should be buffer_impl.h so it has access to the struct iio_buffer definition. The code currently only works because all places that use buffer-dma.h include buffer_impl.h before it. The include to buffer.h in industrialio-buffer-dma.c can be removed since those file does not reference any of buffer consumer functions. Signed-off-by:
-
Alexandru Lazar authored
Add driver for the Maxim MAX1241 12-bit, single-channel ADC. Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdfReviewed-by:
Alexandru Lazar <alazar@startmail.com> Reviewed-by:
-
Alexandru Lazar authored
Add device-tree bindings documentation for the MAX1241 device driver. Signed-off-by:
-
Gaëtan André authored
Add support for STMicroelectronics LISHH12 accelerometer in st_accel framework. https://www.st.com/resource/en/datasheet/lis2hh12.pdfSigned-off-by:
Gaëtan André <rvlander@gaetanandre.eu> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Gaëtan André authored
Add LIS2HH12 compatible entry. Signed-off-by:
-
Jimmy Assarsson authored
Add LIS3MDL register map to sensor hub device table. Tested with LSM6DSM. Signed-off-by:
Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by:
-
Jimmy Assarsson authored
Support for sensor with up to 8 different ODR settings. Required for supporting LIS3MDL as sensor hub slave device. Signed-off-by:
-
Rohit Sarkar authored
debugfs_create_file_unsafe does not protect the fops handed to it against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of the file lifetime and thus protects it against removal. Signed-off-by:
Rohit Sarkar <rohitsarkar5398@gmail.com> Tested-by Nuno Sá <nuno.sa@analog.com> Signed-off-by:
-
Rohit Sarkar authored
debugfs_create_file_unsafe does not protect the fops handed to it against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of the file lifetime and thus protects it against removal. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce st_lsm6dsx_shub_set_full_scale routine in order to configure the i2c slave device sensitivity Tested-by:
-
Fabrice Gasnier authored
Convert the STM32 DAC binding to DT schema format using json-schema Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by:
-
Nishant Malpani authored
Convert the TSL2563 device tree bindings to the new YAML format. Signed-off-by:
Nishant Malpani <nish.malpani25@gmail.com> Reviewed-by:
-
Alexandru Ardelean authored
This change adds the binding doc for the AD9467 ADC. Signed-off-by:
-
Michael Hennerich authored
The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital converter (ADC). It is optimized for high performanceover wide bandwidths and ease of use. The product operates at a 250 MSPS conversion rate and is designed for wireless receivers, instrumentation, and test equipment that require a high dynamic range. The ADC requires 1.8 V and 3.3 V power supplies and a low voltage differential input clock for full performance operation. No external reference or driver components are required for many applications. Data outputs are LVDS compatible (ANSI-644 compatible) and include the means to reduce the overall current needed for short trace distances. Since the chip can operate at such high sample-rates (much higher than classical interfaces), it requires that a DMA controller be used to interface directly to the chip and push data into memory. Typically, the AXI ADC IP core is used to interface with it. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdfSigned-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Alexandru Ardelean authored
This change adds the bindings documentation for the AXI ADC driver. Reviewed-by:
-
Michael Hennerich authored
This change adds support for the Analog Devices Generic AXI ADC IP core. The IP core is used for interfacing with analog-to-digital (ADC) converters that require either a high-speed serial interface (JESD204B/C) or a source synchronous parallel interface (LVDS/CMOS). Usually, some other interface type (i.e SPI) is used as a control interface for the actual ADC, while the IP core (controlled via this driver), will interface to the data-lines of the ADC and handle the streaming of data into memory via DMA. Because of this, the AXI ADC driver needs the other SPI-ADC driver to register with it. The SPI-ADC needs to be register via the SPI framework, while the AXI ADC registers as a platform driver. The two cannot be ordered in a hierarchy as both drivers have their own registers, and trying to organize this [in a hierarchy becomes] problematic when trying to map memory/registers. There are some modes where the AXI ADC can operate as standalone ADC, but those will be implemented at a later point in time. DocLink: https://wiki.analog.com/resources/fpga/docs/axi_adc_ipSigned-off-by:
-
Alexandru Ardelean authored
Currently, when using a 'iio_dmaengine_buffer_alloc()', an matching call to 'iio_dmaengine_buffer_free()' must be made. With this change, this can be avoided by using 'devm_iio_dmaengine_buffer_alloc()'. The buffer will get free'd via the device's devres handling. Signed-off-by:
-
Alexandru Ardelean authored
The 'size_t' type behaves differently on 64-bit architectures, and causes compiler a warning of the sort "format '%u' expects argument of type 'unsigned int', but argument 3 has type 'size_t {aka long unsigned int}'". This change adds the correct specifier for the 'align' field. Fixes: 4538c185 ("iio: buffer-dmaengine: Report buffer length requirements") Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
-
Alexandru Ardelean authored
The format for all ADI AXI IP cores is the same. i.e. 'major.minor.patch'. This patch adds the helper macros to be re-used in ADI AXI drivers. Acked-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Alexandru Ardelean authored
The initial version use a tab between '#define' & 'ADI_AXI_REG_VERSION'. This changes it to space. The change is purely cosmetic. Acked-by:
-
Alexandru Ardelean authored
This seems like a left-over from a7348347 ("staging:iio: Add polling of events on the ring access chrdev."). Then it was moved into the sca3000 driver around 9dd4694d ("iio: staging: sca3000: hide stufftoread logic"), and that one seemed to be the only user of this. Then it eventually was no longer used after 152a6a88 ("staging:iio:accel:sca3000 move to hybrid hard / soft buffer design.") Signed-off-by:
-
Rohit Sarkar authored
Remove redundant comparison to a boolean variable. Fixes coccinelle warning: drivers/iio/temperature//ltc2983.c:393:20-32: WARNING: Comparison to bool drivers/iio/temperature//ltc2983.c:394:20-32: WARNING: Comparison to bool Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Signed-off-by:
-
Rohit Sarkar authored
The debugfs interface provides direct access to read and write device registers if debugfs is enabled. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by:
-
