While there is a need to go from a LIBNVDIMM 'struct nvdimm' to a CXL
'struct cxl_nvdimm', there is no use case to go the other direction.
Likely this is a leftover from an early version of the referenced commit
before it implemented devm for releasing the created nvdimm.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220624041950.559155-19-dan.j.williams@intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Unless and until accelerator (type-2) drivers start registering for
CXL.mem mapping services from the CXL subsystem core, initialize idle
HDM decoders to the "expander" type. I.e. the only CXL devices using the
CXL core presently are those implementing the CXL 2.0 Type-3 memory
expander device class code that the cxl_pci driver claims.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220624041950.559155-6-dan.j.williams@intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Region creation has need for checking host-bridge connectivity when
adding endpoints to regions. Record, at port creation time, the
host-bridge to provide a useful shortcut from any location in the
topology to the most-significant ancestor.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220624041950.559155-4-dan.j.williams@intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

The 'enabled' state is reserved for committed decoders. By default,
cxl_test decoders are uncommitted at init time.

Fixes: 7c7d68db ("tools/testing/cxl: Enumerate mock decoders")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603888091.551046.6312322707378021172.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In support of testing DPA allocation mechanisms in the CXL core, the
cxl_test environment needs to support establishing and retrieving the
'pmem partition boundary.

Replace the platform_device_add_resources() method for delineating DPA
within an endpoint with an emulated DEV_SIZE amount of partitionable
capacity. Set DEV_SIZE such that an endpoint has enough capacity to
simultaneously participate in 8 distinct regions.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603887411.551046.13234212587991192347.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

For the x2 host-bridge interleave windows, allow for a
x8-endpoint-interleave configuration per memory-type with each device
contributing the minimum 256MB extent. Similarly, for the x1 host-bridge
interleave windows, allow for a x4-endpoint-interleave configuration per
memory-type.

Bump up the number of decoders per-port to support hosting 8 regions.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603886721.551046.8682583835505795210.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

A recent QEMU upgrade resulted in collisions between QEMU's chosen
location for PCI MMIO and cxl_test's fake address location for emulated
CXL purposes. This was great for testing resource collisions, but not so
great for continuing to test the nominal cases. Move cxl_test to the
top-of-memory where it is less likely to collide with other resources.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603886021.551046.12395967874222763381.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Dump the device-physical-address map for a CXL expander in /proc/iomem
style format. E.g.:

  cat /sys/kernel/debug/cxl/mem1/dpamem
  00000000-0fffffff : ram
  10000000-1fffffff : pmem
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603885318.551046.8308248564880066726.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In preparation for a new cxl debugfs file, move 'cxl' directory
establishment and teardown to the core and let subsequent init routines
reference that setup.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603884654.551046.4962104601691723080.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Clarify the access permission of CXL sysfs attributes in the
documentation to help development of userspace tooling.
Reported-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603881198.551046.12893348287451903699.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In preparation for region provisioning all device decoders need to be
enumerated since DPA allocations are calculated by summing the
capacities of all decoders in a set. I.e. the programming for decoder[N]
depends on the state of decoder[N-1], so skipping over decoders that
fail to initialize prevents accurate DPA accounting.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
[djbw: reword changelog]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603879664.551046.6863805202478861026.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

To date the per-device-partition DPA range information has only been
used for enumeration purposes. In preparation for allocating regions
from available DPA capacity, convert those ranges into DPA-type resource
trees.

With resources and the new add_dpa_res() helper some open coded end
address calculations and debug prints can be cleaned.

The 'cxlds->pmem_res' and 'cxlds->ram_res' resources are child resources
of the total-device DPA space and they in turn will host DPA allocations
from cxl_endpoint_decoder instances (tracked by cxled->dpa_res).

Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603878921.551046.8127845916514734142.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Interleave granularity and ways have CXL specification defined encodings.
Promote the conversion helpers to a common header, and use them to
replace other open-coded instances.

Force caller to consider the error case of the conversion similarly to
other conversion helpers like kstrto*().
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603875016.551046.17236943065932132355.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

This helper was only used to identify the object type for lockdep
purposes. Now that lockdep support is done with explicit lock classes,
this helper can be dropped.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603874340.551046.15491766127759244728.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Root decoders are responsible for hosting the available host address
space for endpoints and regions to claim. The tracking of that available
capacity can be done in iomem_resource directly. As a result, root
decoders no longer need to host their own resource tree. The
current ->platform_res attribute was added prematurely.

Otherwise, ->hpa_range fills the role of conveying the current decode
range of the decoder.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603873619.551046.791596854070136223.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In preparation for growing a ->dpa_range attribute for endpoint
decoders, rename the current ->decoder_range to the more descriptive
->hpa_range.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603872867.551046.2170426227407458814.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Save a few characters and use the already initialized local variable.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603872171.551046.913207574344536475.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

The upcoming region provisioning implementation has a need to
dereference port->uport during the port unregister flow. Specifically,
endpoint decoders need to be able to lookup their corresponding memdev
via port->uport.

The existing ->dead flag was added for cases where the core was
committed to tearing down the port, but needed to drop locks before
calling device_unregister(). Reuse that flag to indicate to
delete_endpoint() that it has no "release action" work to do as
unregister_port() will handle it.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603871491.551046.6682199179541194356.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

This failing signature:

[    8.392669] cxl_bus_probe: cxl_port endpoint2: probe: 970997760
[    8.392670] cxl_port: probe of endpoint2 failed with error 970997760
[    8.392719] create_endpoint: cxl_mem mem0: add: endpoint2
[    8.392721] cxl_mem mem0: endpoint2 failed probe
[    8.392725] cxl_bus_probe: cxl_mem mem0: probe: -6

...shows cxl_hdm_decode_init() resulting in a return code ("970997760")
that looks like stack corruption. The problem goes away if
cxl_hdm_decode_init() is not mocked via __wrap_cxl_hdm_decode_init().

The corruption results from the mismatch that the calling convention for
cxl_hdm_decode_init() is:

int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)

...and __wrap_cxl_hdm_decode_init() is:

bool __wrap_cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm)

...i.e. an int is expected but __wrap_hdm_decode_init() returns bool.

Fix the convention and cleanup the organization to match
__wrap_cxl_await_media_ready() as the difference was a red herring that
distracted from finding the bug.

Fixes: 92804edb ("cxl/pci: Drop @info argument to cxl_hdm_decode_init()")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603870776.551046.8709990108936497723.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

The conversion of command sizes to unsigned missed a couple of checks
against variable size payloads during command validation, which made all
variable payload commands unconditionally fail. Add the checks back using
the new CXL_VARIABLE_PAYLOAD scheme.

Fixes: 26f89535 ("cxl/mbox: Use type __u32 for mailbox payload sizes")
Cc: <stable@vger.kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Reported-by: Abhi Cs <abhi.cs@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20220628220109.633564-1-vishal.l.verma@intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

In the CONFIG_MEMREGION=n case, memregion_free() is meant to be a static
inline. 0day reports:

    In file included from drivers/cxl/core/port.c:4:
    include/linux/memregion.h:19:6: warning: no previous prototype for
    function 'memregion_free' [-Wmissing-prototypes]

Mark memregion_free() static.

Fixes: 33dd7075 ("lib: Uplevel the pmem "region" ida to a global allocator")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/165601455171.4042645.3350844271068713515.stgit@dwillia2-xfhSigned-off-by: Dan Williams <dan.j.williams@intel.com>

CXL specification defines these as little endian.

Fixes: 60b8f172 ("cxl/pmem: Translate NVDIMM label commands to CXL label commands")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20220225221456.1025635-1-alison.schofield@intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Save some characters and directly check decoder type rather than port
type. There's no need to check if the port is an endpoint port since, by
this point, cxl_endpoint_decoder_alloc() has a specified type.

Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The device is created, and then there is a check if a driver succesfully
bound to it. In event of failing the bind (e.g. failure in cxl_port_probe())
the device is left registered. When a bus rescan later occurs, fresh
devices are created leading to a multiple device representing the same
underlying hardware. Bad things may follow and at very least we have far too many
devices.

Fix by ensuring autoremove is registered if the device create succeeds,
but doesn't depend on sucessful binding to a driver.

Bug was observed as side effect of incorrect ownership in
[PATCH v9 6/9] cxl/port: Read CDAT table
but will result from any failure to in cxl_port_probe().

Fixes: 8dd2bc0f ("cxl/mem: Add the cxl_mem driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220609134519.11668-1-Jonathan.Cameron@huawei.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

I'm leaving Intel. Update email address to korg and add .mailmap
entries. For now, I will be taking a reduced role in CXL development,
but I still plan to spend time working on it, and I can still serve as a
good substitute if needed for maintainer responsibilities (that may
change in the future).
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20220520180059.632054-1-bwidawsk@kernel.orgSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Pull x86 fixes from Thomas Gleixner:

 - Make RESERVE_BRK() work again with older binutils. The recent
   'simplification' broke that.

 - Make early #VE handling increment RIP when successful.

 - Make the #VE code consistent vs. the RIP adjustments and add
   comments.

 - Handle load_unaligned_zeropad() across page boundaries correctly in
   #VE when the second page is shared.

* tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
  x86/tdx: Clarify RIP adjustments in #VE handler
  x86/tdx: Fix early #VE handling
  x86/mm: Fix RESERVE_BRK() for older binutils

Pull build tooling updates from Thomas Gleixner:

 - Remove obsolete CONFIG_X86_SMAP reference from objtool

 - Fix overlapping text section failures in faddr2line for real

 - Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
   with finegrained annotations so objtool can validate that code
   correctly.

* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
  faddr2line: Fix overlapping text section failures, the sequel
  objtool: Fix obsolete reference to CONFIG_X86_SMAP

Pull scheduler fix from Thomas Gleixner:
 "A single scheduler fix plugging a race between sched_setscheduler()
  and balance_push().

  sched_setscheduler() spliced the balance callbacks accross a lock
  break which makes it possible for an interleaving schedule() to
  observe an empty list"

* tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix balance_push() vs __sched_setscheduler()

Pull lockdep fix from Thomas Gleixner:
 "A RT fix for lockdep.

  lockdep invokes prandom_u32() to create cookies. This worked until
  prandom_u32() was switched to the real random generator, which takes a
  spinlock for extraction, which does not work on RT when invoked from
  atomic contexts.

  lockdep has no requirement for real random numbers and it turns out
  sched_clock() is good enough to create the cookie. That works
  everywhere and is faster"

* tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Use sched_clock() for random numbers

Pull irq fixes from Thomas Gleixner:
 "A set of interrupt subsystem updates:

  Core:

   - Ensure runtime power management for chained interrupts

  Drivers:

   - A collection of OF node refcount fixes

   - Unbreak MIPS uniprocessor builds

   - Fix xilinx interrupt controller Kconfig dependencies

   - Add a missing compatible string to the Uniphier driver"

* tag 'irq-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/loongson-liointc: Use architecture register to get coreid
  irqchip/uniphier-aidet: Add compatible string for NX1 SoC
  dt-bindings: interrupt-controller/uniphier-aidet: Add bindings for NX1 SoC
  irqchip/realtek-rtl: Fix refcount leak in map_interrupts
  irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions
  irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions
  irqchip/apple-aic: Fix refcount leak in aic_of_ic_init
  irqchip/apple-aic: Fix refcount leak in build_fiq_affinity
  irqchip/gic/realview: Fix refcount leak in realview_gic_of_init
  irqchip/xilinx: Remove microblaze+zynq dependency
  genirq: PM: Use runtime PM for chained interrupts

Merge tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes for real from Greg KH:
 "Let's tag the proper branch this time...

  Here are some small char/misc driver fixes for 5.19-rc3 that resolve
  some reported issues.

  They include:

   - mei driver fixes

   - comedi driver fix

   - rtsx build warning fix

   - fsl-mc-bus driver fix

  All of these have been in linux-next for a while with no reported
  issues"

This is what the merge in commit f0ec9c65 _should_ have merged, but
Greg fat-fingered the pull request and I got some small changes from
linux-next instead there. Credit to Nathan Chancellor for eagle-eyes.

Link: https://lore.kernel.org/all/Yqywy+Md2AfGDu8v@dev-arch.thelio-3990X/

* tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()
  mei: me: add raptor lake point S DID
  mei: hbm: drop capability response on early shutdown
  mei: me: set internal pg flag to off on hardware reset
  misc: rtsx: Fix clang -Wsometimes-uninitialized in rts5261_init_from_hw()
  comedi: vmk80xx: fix expression for tx buffer size

Pull i2c fixes from Wolfram Sang:
 "MAINTAINERS rectifications and a few minor driver fixes"

* tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
  i2c: designware: Use standard optional ref clock implementation
  MAINTAINERS: core DT include belongs to core
  MAINTAINERS: add include/dt-bindings/i2c to I2C SUBSYSTEM HOST DRIVERS
  i2c: npcm7xx: Add check for platform_driver_register
  MAINTAINERS: Update Synopsys DesignWare I2C to Supported

Pull xfs fixes from Darrick Wong:
 "There's not a whole lot this time around (I'm still on vacation) but
  here are some important fixes for new features merged in -rc1:

   - Fix a bug where inode flag changes would accidentally drop nrext64

   - Fix a race condition when toggling LARP mode"

* tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: preserve DIFLAG2_NREXT64 when setting other inode attributes
  xfs: fix variable state usage
  xfs: fix TOCTOU race involving the new logged xattrs control knob

Pull ext4 fixes from Ted Ts'o:
 "Fix a variety of bugs, many of which were found by folks using fuzzing
  or error injection.

  Also fix up how test_dummy_encryption mount option is handled for the
  new mount API.

  Finally, fix/cleanup a number of comments and ext4 Documentation
  files"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix a doubled word "need" in a comment
  ext4: add reserved GDT blocks check
  ext4: make variable "count" signed
  ext4: correct the judgment of BUG in ext4_mb_normalize_request
  ext4: fix bug_on ext4_mb_use_inode_pa
  ext4: fix up test_dummy_encryption handling for new mount API
  ext4: use kmemdup() to replace kmalloc + memcpy
  ext4: fix super block checksum incorrect after mount
  ext4: improve write performance with disabled delalloc
  ext4: fix warning when submitting superblock in ext4_commit_super()
  ext4, doc: remove unnecessary escaping
  ext4: fix incorrect comment in ext4_bio_write_page()
  fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment

Pull cifs client fixes from Steve French:
 "Two cifs debugging improvements - one found to deal with debugging a
  multichannel problem and one for a recent fallocate issue

  This does include the two larger multichannel reconnect (dynamically
  adjusting interfaces on reconnect) patches, because we recently found
  an additional problem with multichannel to one server type that I want
  to include at the same time"

* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: when a channel is not found for server, log its connection id
  smb3: add trace point for SMB2_set_eof

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220605091503.12513-1-wangxiang@cdjrlc.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.

 mkfs.ext4 /dev/sda 3G
 tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
 mount /dev/sda /mnt
 resize2fs /dev/sda 8G

 ========
 BUG: kernel NULL pointer dereference, address: 0000000000000028
 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
 ...
 RIP: 0010:ext4_flex_group_add+0xe08/0x2570
 ...
 Call Trace:
  <TASK>
  ext4_resize_fs+0xbec/0x1660
  __ext4_ioctl+0x1749/0x24e0
  ext4_ioctl+0x12/0x20
  __x64_sys_ioctl+0xa6/0x110
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f2dd739617b
 ========

The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().

Fixes: 46c116b9 ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>