- 03 Jan, 2020 16 commits
-
-
Stanley Chu authored
Add device reset vops implementation in MediaTek UFS driver. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1577683950-1702-3-git-send-email-stanley.chu@mediatek.comReviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Stanley Chu authored
Add a common header for the SiP service interface in MediaTek Chipsets. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1577683950-1702-2-git-send-email-stanley.chu@mediatek.comSigned-off-by:
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header file related to UFS Host Controller. It assigns explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Link: https://lore.kernel.org/r/5ca6287665fe52d8f40062e0eab8561d2b7a5b40.1577511720.git.nishadkamdar@gmail.comSuggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to Mylex DAC960/DAC1100 PCI RAID Controllers. It assigns explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Link: https://lore.kernel.org/r/88332ad390f985bdebb9f2adaf2d499b0a639753.1577511720.git.nishadkamdar@gmail.comSuggested-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Bart Van Assche authored
The UFS SCSI timeout handler was needed to compensate that ufshcd_queuecommand() could return SCSI_MLQUEUE_HOST_BUSY for a long time. Commit a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts") fixed this so the timeout handler is no longer necessary. See also commit f550c65b ("scsi: ufs: implement scsi host timeout handler"). Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-7-bvanassche@acm.orgReviewed-by:Can Guo <cang@codeaurora.org> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
Starting execution of a command before tracing a command may cause the completion handler to free data while it is being traced. Fix this race by tracing a command before it is submitted. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-5-bvanassche@acm.orgReviewed-by:
-
Bart Van Assche authored
Since the lrbp->cmd expression occurs multiple times, introduce a new local variable to hold that pointer. This patch does not change any functionality. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-4-bvanassche@acm.orgReviewed-by:
-
Bart Van Assche authored
Since the lrbp->cmd expression occurs multiple times, introduce a new local variable to hold that pointer. This patch does not change any functionality. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-3-bvanassche@acm.orgReviewed-by:
-
Bart Van Assche authored
Remove a space that occurs after a tab. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-2-bvanassche@acm.orgReviewed-by:
-
Stanley Chu authored
We already have ufshcd_vops_dbg_register_dump() thus all "hba->vops->dbg_register_dump" references can be replaced by it. Link: https://lore.kernel.org/r/1577192466-20762-3-git-send-email-stanley.chu@mediatek.comReviewed-by:
-
Stanley Chu authored
Currently UFS driver has ufshcd_scsi_block_requests() with reference counter mechanism to avoid possible racing of blocking and unblocking requests flow. Unify all users in UFS driver to use the same function. Link: https://lore.kernel.org/r/1577192466-20762-2-git-send-email-stanley.chu@mediatek.comReviewed-by:
-
Damien Le Moal authored
Now that the block layer implement zone checks on revalidate, sd_zbc_check_zones() is reduced getting the zone size and verifying the device capacity for device with RC_BASIS=0. Be clear about this by renaming sd_zbc_check_zones() to sd_zbc_check_capacity() and updating the function description and comments. Link: https://lore.kernel.org/r/20191220075823.400072-3-damien.lemoal@wdc.comSigned-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Damien Le Moal authored
Now that the block layer generic zone revalidation code in blk_revalidate_disk_zones() checks for power of 2 zone size, there is no need to do it in sd_zbc_check_zones(). Remove this check. Link: https://lore.kernel.org/r/20191220075823.400072-2-damien.lemoal@wdc.comSigned-off-by:
-
Bart Van Assche authored
This patch improves readability and does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20191219005050.40193-1-bvanassche@acm.orgReviewed-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
Bart Van Assche authored
Since qla82xx_get_fw_size() returns a number in CPU-endian format, change its return type from __le32 into u32. This patch does not change any functionality. Fixes: 9c2b2975 ("[SCSI] qla2xxx: Support for loading Unified ROM Image (URI) format firmware file.") Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20191219004905.39586-1-bvanassche@acm.orgReviewed-by:
-
Bart Van Assche authored
Declare qla_hw_data.flt as a qla_flt_header pointer instead of as a void pointer. Add a zero-length array at the end of struct qla_flt_header to make it clear that qla_flt_header and qla_flt_region are contiguous. This patch removes several casts but does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20191219004706.39039-1-bvanassche@acm.orgReviewed-by:
-
- 21 Dec, 2019 18 commits
-
-
John Garry authored
Currently we use a mixture of %016llx, %llx, and %16llx when printing a SAS address. Since the most significant nibble of the SAS address is always 5 - as per standard - this formatting is not so important; but some fake SAS addresses for SATA devices may not be. And we have mangled/invalid address to consider also. And it's better to be consistent in the code, so use a fixed format. The SAS address is a fixed size at 64b, so we want to 0 byte extend to 16 nibbles, so use %016llx globally. Also make some prints to be explicitly hex, and tidy some whitespace issue. Link: https://lore.kernel.org/r/1576758957-227350-1-git-send-email-john.garry@huawei.comSigned-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 12.6.0.3 Link: https://lore.kernel.org/r/20191218235808.31922-11-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Current driver code looks at iocb types and uses a "==" comparison on the flags to determine type. If another flag were set, it would disrupt the comparison. Fix by converting to a bitwise & operation. Link: https://lore.kernel.org/r/20191218235808.31922-10-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
When running Cisco-MDS diagnostics which perform driver-level frame loop back, the switch is reporting errors. Diagnostic has a limit on latency that is not being met by the driver. The requirement of Latency frames is that they should be responded back by the host with a maximum delay of few hundreds of microseconds. If the switch doesn't get response frames within this time frame, it fails the test. Test is failing as the lpfc-wq workqueue was overwhelmed by the packet rate and in some cases, the work element yielded to other kernel elements. To resolve, reduce the outstanding load allowed by the adapter. This ensures the driver spends a reasonable amount of time doing loopback and can do so such that latency values can be met. Load is managed by reducing the number of receive buffers posted such that the link can be backpressured to reduce load. Link: https://lore.kernel.org/r/20191218235808.31922-9-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
When unattaching, the driver did not unmap the DPP bar. This caused the next load of the driver, which attempts to enable wc, to not work correctly and wc to be disabled due to an address mapping overlap. Fix by unmapping on unattach. Link: https://lore.kernel.org/r/20191218235808.31922-8-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
The order of the flags/checks for adapters where FC-AL is supported erroneously excluded lpe35000 adapter models. Also noted that the G7 flags for Loop and Persistent topology are incorrect. They should follow the rules as G6. Rework the logic to enable LPe35000 FC-AL support. Collapse G7 support logic to the same rules as G6. Link: https://lore.kernel.org/r/20191218235808.31922-7-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
/sys/kernel/debug/lpfc/fn0/ras_log always shows the same ras_log even if there are link bounce events triggered via issue_lip Dynamic FW logging had logic that prematurely breaks from the buffer filling loop. Fix the check for buffer overrun by looking before copying and restricting copy length to the remaining buffer. When copying, ensure space for NULL character is left in the buffer. While in the routine - ensure the buffer is cleared before adding elements. Link: https://lore.kernel.org/r/20191218235808.31922-6-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
There are reports of multiple ports on the same system displaying different hostnames in fabric FDMI displays. Currently, the driver registers the hostname at initialization and obtains the hostname via init_utsname()->nodename queried at the time the FC link comes up. Unfortunately, if the machine hostname is updated after initialization, such as via DHCP or admin command, the value registered initially will be incorrect. Fix by having the driver save the hostname that was registered with FDMI. The driver then runs a heartbeat action that will check the hostname. If the name changes, reregister the FMDI data. The hostname is used in RSNN_NN, FDMI RPA and FDMI RHBA. Link: https://lore.kernel.org/r/20191218235808.31922-5-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
When the WriteObject mailbox response has change_status set to is 0x2 (Firmware Reset) or 0x04 (Port Migration Reset), the CSF field should also be checked to see if a fw reset is sufficient to enable all new features in the updated firmware image. If not, a fw reset would start the new firmware, but with a feature level equal to existing firmware. To enable the new features, a chip reset/pci slot reset would be required. Check the CSF bit when change_status is 0x2 or 0x4 to know whether to perform a pci bus reset or fw reset. Link: https://lore.kernel.org/r/20191218235808.31922-4-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
This patch reworks the fdmi symbolic node name data for the following two issues: - Correcting extraneous periods following the DV and HN fdmi data fields. - Avoiding buffer overflow issues when formatting the data. The fix to the fist issue is to just remove the characters. The fix to the second issue has all data being staged in temporary storage before being moved to the real buffer. Link: https://lore.kernel.org/r/20191218235808.31922-3-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
NVMe device re-discovery does not complete. Dev_loss_tmo messages seen on initiator after recovery from a link disturbance. The failing case is the following: When the driver (as a NVME target) receives a PLOGI, the driver initiates an "unreg rpi" mailbox command. While the mailbox command is in progress, the driver requests that an ACC be sent to the initiator. The target's ACC is received by the initiator and the initiator then transmits a PLOGI. The driver receives the PLOGI prior to receiving the completion for the PLOGI response WQE that sent the ACC. (Different delivery sources from the hw so the race is very possible). Given the PLOGI is prior to the ACC completion (signifying PLOGI exchange complete), the driver LS_RJT's the PRLI. The "unreg rpi" mailbox then completes. Since PRLI has been received, the driver transmits a PLOGI to restart discovery, which the initiator then ACC's. If the driver processes the (re)PLOGI ACC prior to the completing the handling for the earlier ACC it sent the intiators original PLOGI, there is no state change for completion of the (re)PLOGI. The ndlp remains in "PLOGI Sent" and the initiator continues sending PRLI's which are rejected by the target until timeout or retry is reached. Fix by: When in target mode, defer sending an ACC for the received PLOGI until unreg RPI completes. Link: https://lore.kernel.org/r/20191218235808.31922-2-jsmart2021@gmail.comSigned-off-by:
-
Himanshu Madhani authored
Link: https://lore.kernel.org/r/20191217220617.28084-15-hmadhani@marvell.comSigned-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Quinn Tran authored
MTCP dump failed due to MB Reg 10 was picking garbage data from stack memory. Fixes: 81178772 ("[SCSI] qla2xxx: Implemetation of mctp.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217220617.28084-14-hmadhani@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
Fix race condition between GNL completion processing and GNL request. Late submission of GNL request was not seen by the GNL completion thread. This patch will re-submit the GNL request for late submission fcport. Link: https://lore.kernel.org/r/20191217220617.28084-13-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
This patch fixes offset for Format-2 data structure for Report ID Acquisition. This caused driver to set remote_nport_id to 0x0000 in N2N configuration. In a scenario where initiator's WWPN is higher than target's WWPN, driver will assign 0x00 as target nport-id, which results into login failure. Link: https://lore.kernel.org/r/20191217220617.28084-12-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
Consolidate scan for fabric loop and fabric topologies into a single scan. Link: https://lore.kernel.org/r/20191217220617.28084-11-hmadhani@marvell.comSigned-off-by:
-
Shyam Sundar authored
This patch fixes some instances of FCF_ASYNC_{SENT|ACTIVE} flag setting and clearning were missing. Link: https://lore.kernel.org/r/20191217220617.28084-10-hmadhani@marvell.comSigned-off-by:Shyam Sundar <ssundar@marvell.com> Signed-off-by:
-
Quinn Tran authored
Session is stuck if driver sees FW has received a PRLI. Driver allows FW to finish with processing of PRLI by checking back with FW at a later time to see if the PRLI has finished. Instead, driver failed to push forward after re-checking PRLI completion. Fixes: ce0ba496 ("scsi: qla2xxx: Fix stuck login session") Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20191217220617.28084-9-hmadhani@marvell.comSigned-off-by:
-
- 20 Dec, 2019 6 commits
-
-
Quinn Tran authored
This patch does not change any any functionality. Link: https://lore.kernel.org/r/20191217220617.28084-8-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch adds more details when D-Port diag async event is generated by the firmware. Link: https://lore.kernel.org/r/20191217220617.28084-7-hmadhani@marvell.comSigned-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Himanshu Madhani authored
logout_on_delete flag should not be set if the topology is Loop. This patch fixes unintentional logout during loop topology. Link: https://lore.kernel.org/r/20191217220617.28084-6-hmadhani@marvell.comSigned-off-by:
-
Shyam Sundar authored
This patch removes unused qla2x00_async_logout_done from the code. Link: https://lore.kernel.org/r/20191217220617.28084-5-hmadhani@marvell.comSigned-off-by:
-
Shyam Sundar authored
This patch adds a shadow variable to hold disc_state history for the fcport and prints state transition when the logging is enabled. Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
On timeout, SRB pointer was cleared from outstanding command array and dropped. It was not allowed to go through the done process and cleanup. This patch will abort the SRB where FW will return it with an error status and resume the normal cleanup. Link: https://lore.kernel.org/r/20191217220617.28084-3-hmadhani@marvell.comSigned-off-by:
-
