- 21 Apr, 2022 3 commits
-
-
Kuninori Morimoto authored
commit cfb7b8bf ("ASoC: rsnd: tidyup rsnd_ssiu_busif_err_status_clear()") merged duplicate code, but it didn't care about default case, and causes smatch warnings. smatch warnings: sound/soc/sh/rcar/ssiu.c:112 rsnd_ssiu_busif_err_status_clear() \ error: uninitialized symbol 'offset'. sound/soc/sh/rcar/ssiu.c:114 rsnd_ssiu_busif_err_status_clear() \ error: uninitialized symbol 'shift'. This patch cares it. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r15rgn6p.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Steve Lee authored
This adds support for the reset gpio binding. Signed-off-by:
Steve Lee <steve.lee.analog@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220420044900.2989-2-steve.lee.analog@gmail.comSigned-off-by:
-
Steve Lee authored
Add reset gpio control to support RESET PIN connected to gpio. Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220420044900.2989-1-steve.lee.analog@gmail.comSigned-off-by:
-
- 20 Apr, 2022 6 commits
-
-
Minghao Chi authored
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220420030315.2575691-1-chi.minghao@zte.com.cnSigned-off-by:
-
Ajit Kumar Pandey authored
Add alsa snd_soc_pm_ops callback in ACP machine driver to support suspend and resume operation of sound card components Signed-off-by:
Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20220420094442.1352717-1-AjitKumar.Pandey@amd.comSigned-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: With additional tests with the introduction of a 'deep-buffer' PCM device mixed with the regular low-latency path, we came up with two improvements in the BE state machine and transitions. The short explanation is that the BE cannot directly use the trigger commands provided by the FE, and a translation is needed to deal with paused states.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: The INTEL_IPC4 protocol and firmware architecture will rely on different sets of firmware binary and topology files. Some platforms will only support INTEL_IPC4, some will support both INTEL_IPC4 and SOF_IPC for development, and some will stay with the existing SOF_IPC. This patchset adds new IPC definitions, and search paths for firmware and topology files, along with means to override the default IPC type and search paths for development. The firmware binary names are aligned with those used by the Intel AVS driver to avoid duplicate firmware installs, but the topology will have to differ due to driver architecture differences.
-
Mark Brown authored
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: A continuation of avs-driver initial series [1]. This chapter covers path management and topology parsing part which was ealier path of the main series. The two patches that represented these two subjects in the initial series, have been split into many to allow for easier review and discussion. AVS topology is split into two major parts: dictionaries - found within ASoC topology manifest - and path templates. Dictionaries job is to reduce the total amount of memory occupied by topology elements. Rather than having every pipeline and module carry its own information, each refers to specific entry in specific dictionary by provided (from topology file) indexes. In consequence, most struct avs_tplg_xxx are made out of pointers. Path templates are similar to path descriptions found in skylake-driver and they describe how given path shall look like in runtime - number of modules and pipelines that shape it and how they are laid out. A single path template is tied either to FE or BE and thus at most to a single, user-visible endpoint when speaking of FE. Path is a software representation of its ADSP firmware equivalent. It's a logical container for pipelines which are themselves containers - this time for modules i.e. processing units. Depending on the number of audio formats supported, each path template may carry one or more descriptions of given path. During runtime, when audio format is known, description matching said format is selected and used when instantiating path on ADSP firmware side through IPCs.
-
Mark Brown authored
Merge series from Sascha Hauer <s.hauer@pengutronix.de>: Cleanups for the fsl_micfil driver.
-
- 19 Apr, 2022 31 commits
-
-
Pierre-Louis Bossart authored
When the BE was in PAUSED state, the correct trigger is PAUSE_RELEASE. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220406190056.233481-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Commit 3aa1e96a ("ASoC: soc-pcm: fix BE handling of PAUSE_RELEASE") did not modify the existing logic and kept the same logic for the following transition play FE1 -> BE state is START pause FE1 -> BE state is PAUSED play FE2 -> BE state is START stop FE2 -> BE state is STOP <<< !! release FE1 -> BE state is START stop FE1 -> BE state is STOP At the time it was identified by reviewers that a better solution might consist in play FE1 -> BE state is START pause FE1 -> BE state is PAUSED play FE2 -> BE state is START stop FE2 -> BE state is PAUSE <<< !! release FE1 -> BE state is START stop FE1 -> BE state is STOP This patch suggest a transition to PAUSE when all the 'active' streams are paused. This would allow for a more consistent resource management for platforms where PAUSE and STOP are handled differently. To track the special case of an FE going from PAUSE_PUSH to STOP, we add a state variable for each FE context. This 'fe_pause' boolean is set on PAUSE_PUSH and cleared on either PAUSE_RELEASE and STOP triggers. Signed-off-by:
-
Richard Fitzgerald authored
SND_SOC_SOF_HDA_PROBES must be tristate because the code it builds depends on code that is tristate. If SND_SOC_SOF_HDA_PROBES is bool it leads to the following build inconsistency: SND_SOC_SOF_HDA_COMMON=m which selects SND_SOC_SOF_HDA_PROBES but since this is a bool SND_SOC_SOF_HDA_PROBES=y SND_SOC_SOF_HDA_PROBES=y selects SND_SOC_SOF_DEBUG_PROBES=y so sof-client-probes.c is built into the kernel. sof-client-probes.c calls functions in sof-client.c, but SND_SOC_SOF=m sof-client.c is built into a loadable module. Signed-off-by:Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220407153813.1231866-1-rf@opensource.cirrus.comSigned-off-by:
-
Shengjiu Wang authored
Add DSD format support in this generic dmic driver: DSD_U8, DSD_U16_LE, DSD_U32_LE, Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1650251910-8932-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Sascha Hauer authored
The micfil driver prints out the IRQ numbers for each interrupt at error level. This information is useful for debugging at best, remove it. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20220414162249.3934543-22-s.hauer@pengutronix.deSigned-off-by:
-
Sascha Hauer authored
fsl_set_clock_params() is used only once and easily be folded into its caller, do so. Signed-off-by:
-
Sascha Hauer authored
The "fsl,shared-interrupt" property is undocumented and unnecessary. Just pass IRQF_SHARED unconditionally. Signed-off-by:
-
Sascha Hauer authored
FSL_MICFIL_RATES and FSL_MICFIL_FORMATS is only used once. Drop the unnecesary indirection and use SNDRV_PCM_RATE_8000_48000 and SNDRV_PCM_FMTBIT_S16_LE directly. Signed-off-by:
-
Sascha Hauer authored
The micfil driver doesn't use anything from imx-pcm.h. Drop its inclusion. Signed-off-by:
-
Sascha Hauer authored
For the quality setting the quality setting register values are directly exposed to the kcontrol and thus to userspace. This is unfortunate because the register settings contains invalid bit combinations marked as "N/A". For userspace it doesn't make much sense to be able to set these just to see that the driver responds with "Please make sure you select a valid quality." in the kernel log. Work around this by adding get/set functions for the quality setting. Signed-off-by:
-
Sascha Hauer authored
The reference manual has this for calculating the micfil internal clock divider: MICFIL Clock rate clkdiv = ----------------- 8 * OSR * outrate (with OSR == Oversampling Rate, outrate == output sample rate) The driver first sets the MICFIL Clock rate to (outrate * 1024) and then calculates back the clkdiv value from the above calculation. Simplify this by using a fixed clkdiv value of 8 and set the MICFIL Clock rate to (outrate * clkdiv * OSR * 8). While at it drop disabling the clock before setting its rate. The MICFIL module is disabled when the rate is changed and it is also resetted before it is started again, so I doubt it's necessary to disable the clock. Signed-off-by: -
Sascha Hauer authored
get_pdm_clk() calculates the PDM clock based on the quality setting, but really the PDM clock is independent of the quality, it's always rate * 4 * micfil->osr. Just drop the function and do the calculation in the caller. Signed-off-by:
-
Sascha Hauer authored
The OSR (OverSampling Rate) setting is set once to the default value and never changed throughout the driver. Nevertheless the value is read back from the register for further calculations. Just use the default value because we know what we have written. Signed-off-by:
-
Sascha Hauer authored
The micfil hardware provides the microphone data on multiple successive FIFO registers, one register per stereo pair. Also to work properly the SDMA_DONE0_CONFIG_DONE_SEL bit in the SDMA engines SDMA_DONE0_CONFIG register must be set. This patch provides the necessary information to the SDMA engine driver. Signed-off-by:
-
Sascha Hauer authored
The i.MX SDMA engine can read from / write to multiple successive hardware FIFO registers, referred to as "Multi FIFO support". This is needed for the micfil driver and certain configurations of the SAI driver. This patch adds support for this feature. The number of FIFOs to read from / write to must be communicated from the client driver to the SDMA engine. For this the struct dma_slave_config::peripheral_config field is used. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220414162249.3934543-12-s.hauer@pengutronix.deSigned-off-by:
-
Sascha Hauer authored
The i.MX SDMA driver currently silently ignores unsupported transfer types. These transfer types are specified in the dma channel description in the device tree, so they should really be checked. Issue a message and error out when we hit unsupported transfer types. Signed-off-by:
-
Sascha Hauer authored
The i.MX DMA drivers are device tree only, nothing in include/linux/platform_data/dma-imx.h has platform_data in it, so move the file to include/linux/dma/imx-dma.h. Signed-off-by:
-
Sascha Hauer authored
struct fsl_micfil has unused fields, remove them. Signed-off-by:
-
Sascha Hauer authored
Failed register accesses are really not expected in memory mapped registers. When it fails then the register access itself is likely not the reason, so no need to have extra error messages for each regmap access. Just drop the error messages. This also fixes some places where a return value is concatenated using 'ret |=' and then returned as error value. Signed-off-by:
-
Sascha Hauer authored
Instead regmap_update_bits() use the simpler variants regmap_[set|clear]_bits() where appropriate. Signed-off-by:
-
Sascha Hauer authored
Use GENMASK along with FIELD_PREP and FIELD_GET to access bitfields in registers to straighten register access and to drop a lot of defines. Signed-off-by:
-
Sascha Hauer authored
No need to have defines for the mask of single bits. Also shift is unused. Drop all these unnecessary defines. Signed-off-by:
-
Sascha Hauer authored
All that the .set_sysclk hook in the micfil driver does is to pass the sysclk frequency to fsl_micfil_set_mclk_rate(). This function expects the sample rate as argument though, not any kind of sysclk frequency. The resulting rate setting of the clock is overwritten in hw_params anyway, so drop this altogether. Signed-off-by:
-
Sascha Hauer authored
In get_pdm_clk() REG_MICFIL_CTRL2 is read, but the result is never used. Drop the unused code. Signed-off-by:
-
Sascha Hauer authored
in get_pdm_clk() REG_MICFIL_CTRL2 is read twice. Drop second read. Signed-off-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220418110259.2559144-1-chi.minghao@zte.com.cnSigned-off-by:
-
Srinivasa Rao Mandadapu authored
Update memremap flag from MEMREMAP_WT to MEMREMAP_WC for better performance. Signed-off-by:
Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by:
Venkata Prasad Potturu <quic_potturu@quicinc.com> Signed-off-by:
-
Cezary Rojewski authored
Each module on DSP side serves a processing purpose. Depending on its purpose, it needs different information during its initialization. Add functions responsible for creating instances of specific module types given the information coming from the topology file. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220331135246.993089-15-cezary.rojewski@intel.comSigned-off-by:
-
Cezary Rojewski authored
When binding modules to pins other than pin0, sometimes additional preparations need to be made, depending on the module type. Add function that prepares modules when necessary before binding them. Signed-off-by:
-
Cezary Rojewski authored
Creating the pipelines and instantiating the modules alone is insufficient to have a fully operational stream. Before it can be run, stream components need to be bound. Add arming functions to ensure all necessary operations are completed before path is yielded back to the avs_path_create() caller. Signed-off-by:
-
Cezary Rojewski authored
Add functions to ease with state changing of all objects found in the path. Each represents either a BIND/UNBIND or SET_PIPELINE_STATE IPC. DSP pipelines follow simple state machine scheme: CREATE -> RESET -> PAUSE -> RUNNING -> PAUSE -> RESET -> DELETE There is no STOP, PAUSE serves that purpose instead. Signed-off-by:
-
