P2P client mode was only working the first time.
On subsequent connection attempts the group was successfully created but
no data was sent (no transmitted data packets were seen with a sniffer).

The reason for this was that the hardware was being configured in fixed
rate mode with rate RSI_RATE_1 (1Mbps) which is not valid in the 5GHz band.

In P2P mode wpa_supplicant uses NL80211_CMD_SET_TX_BITRATE_MASK to disallow
the 11b rates in the 2.4GHz band which updated common->fixedrate_mask.

rsi_set_min_rate() then used the fixedrate_mask to calculate the minimum
allowed rate, or 0xffff = auto if none was found.
However that calculation did not account for the different rate sets
allowed in the different bands leading to the error.

Fixing set_min_rate() would result in 6Mb/s being used all the time
which is not what we want either.

The reason the problem did not occur on the first connection is that
rsi_mac80211_set_rate_mask() only updated the fixedrate_mask for
the *current* band. When it was called that was still 2.4GHz as the
switch is done later. So the when set_min_rate() was subsequently
called after the switch to 5GHz it still had a mask of zero, leading
to defaulting to auto mode.

Fix this by differentiating the case of a single rate being
requested, in which case the hardware will be used in fixed rate
mode with just that rate, and multiple rates being requested,
in which case we remain in auto mode but the firmware rate selection
algorithm is configured with a restricted set of rates.

Fixes: dad0d04f ("rsi: Add RS9113 wireless driver")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1630337206-12410-4-git-send-email-martin.fuzzey@flowbird.group

My previous patch checked if encryption should be enabled by directly
checking info->control.hw_key (like the downstream driver).
However that missed that the control and driver_info members of
struct ieee80211_tx_info are union fields.

Due to this when rsi_core_xmit() updates fields in "tx_params"
(driver_info) it can overwrite the control.hw_key, causing the result
of the later test to be incorrect.

With the current structure layout the first byte of control.hw_key is
overlayed with the vap_id so, since we only test if control.hw_key is
NULL / non NULL, a non zero vap_id will incorrectly enable encryption.

In basic STA and AP modes the vap_id is always zero so it works but in
P2P client mode a second VIF is created causing vap_id to be non zero
and hence encryption to be enabled before keys have been set.

Fix this by extracting the key presence flag to a new field in the driver
private tx_params structure and populating it first.

Fixes: 31453804 ("rsi: fix AP mode with WPA failure due to encrypted EAPOL")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1630337206-12410-3-git-send-email-martin.fuzzey@flowbird.group

When BT coexistence is enabled (eg oper mode 13, which is the default)
the initialisation on startup sometimes silently fails.

In a normal initialisation we see
	usb 1-1.3: Product: Wireless USB Network Module
	usb 1-1.3: Manufacturer: Redpine Signals, Inc.
	usb 1-1.3: SerialNumber: 000000000001
	rsi_91x: rsi_probe: Initialized os intf ops
	rsi_91x: rsi_load_9116_firmware: Loading chunk 0
	rsi_91x: rsi_load_9116_firmware: Loading chunk 1
	rsi_91x: rsi_load_9116_firmware: Loading chunk 2
	rsi_91x: Max Stations Allowed = 1

But sometimes the last log is missing and the wlan net device is
not created.

Running a userspace loop that resets the hardware via a GPIO shows the
problem occurring ~5/100 resets.

The problem does not occur in oper mode 1 (wifi only).

Adding logs shows that the initialisation state machine requests a MAC
reset via rsi_send_reset_mac() but the firmware does not reply, leading
to the initialisation sequence being incomplete.

Fix this by delaying attaching the BT adapter until the wifi
initialisation has completed.

With this applied I have done > 300 reset loops with no errors.

Fixes: 716b840c ("rsi: handle BT traffic in driver")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1630337206-12410-2-git-send-email-martin.fuzzey@flowbird.group

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

 - Fix hybrid config terms list corruption.

 - Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

 - Add a file generated during the documentation build to .gitignore.

 - Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

 - Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

 - Fix bpf 'perf test' sample mismatch reporting

 - Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

 - Allow build-id with trailing zeros.

 - Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Pull compiler attributes updates from Miguel Ojeda:

 - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

 - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

 - Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Pull auxdisplay updates from Miguel Ojeda:
 "An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull misc driver fix from Greg KH:
 "Here is a single patch for 5.15-rc1, for the lkdtm misc driver.

  It resolves a build issue that many people were hitting with your
  current tree, and Kees and others felt would be good to get merged
  before -rc1 comes out, to prevent them from having to constantly hit
  it as many development trees restart on -rc1, not older -rc releases.

  It has NOT been in linux-next, but has passed 0-day testing and looks
  'obviously correct' when reviewing it locally :)"

* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: Use init_uts_ns.name instead of macros

Pull IPMI updates from Corey Minyard:
 "A couple of very minor fixes for style and rate limiting.

  Nothing big, but probably needs to go in"

* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: use DEVICE_ATTR helper macro
  ipmi: rate limit ipmi smi_event failure message

Pull scheduler fixes from Borislav Petkov:

 - Make sure the idle timer expires in hardirq context, on PREEMPT_RT

 - Make sure the run-queue balance callback is invoked only on the
   outgoing CPU

* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Prevent balance_push() on remote runqueues
  sched/idle: Make the idle timer expire in hard interrupt context

Pull locking fixes from Borislav Petkov:

 - Fix the futex PI requeue machinery to not return to userspace in
   inconsistent state

 - Avoid a potential null pointer dereference in the ww_mutex deadlock
   check

 - Other smaller cleanups and optimizations

* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix ww_mutex deadlock check
  futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
  futex: Avoid redundant task lookup
  futex: Clarify comment for requeue_pi_wake_futex()
  futex: Prevent inconsistent state and exit race
  futex: Return error code instead of assigning it without effect
  locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT

Pull timer fix from Borislav Petkov:

 - Handle negative second values properly when converting a timespec64
   to nanoseconds.

* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Handle negative seconds correctly in timespec64_to_ns()

Pull namei updates from Al Viro:
 "Clearing fallout from mkdirat in io_uring series. The fix in the
  kern_path_locked() patch plus associated cleanups"

* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  putname(): IS_ERR_OR_NULL() is wrong here
  namei: Standardize callers of filename_create()
  namei: Standardize callers of filename_lookup()
  rename __filename_parentat() to filename_parentat()
  namei: Fix use after free in kern_path_locked

Pull smbfs updates from Steve French:
 "cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions

Pull virtio updates from Michael Tsirkin:

 - vduse driver ("vDPA Device in Userspace") supporting emulated virtio
   block devices

 - virtio-vsock support for end of record with SEQPACKET

 - vdpa: mac and mq support for ifcvf and mlx5

 - vdpa: management netlink for ifcvf

 - virtio-i2c, gpio dt bindings

 - misc fixes and cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
  Documentation: Add documentation for VDUSE
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Implement an MMU-based software IOTLB
  vdpa: Support transferring virtual addressing during DMA mapping
  vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
  vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
  vhost-iotlb: Add an opaque pointer for vhost IOTLB
  vhost-vdpa: Handle the failure of vdpa_reset()
  vdpa: Add reset callback in vdpa_config_ops
  vdpa: Fix some coding style issues
  file: Export receive_fd() to modules
  eventfd: Export eventfd_wake_count to modules
  iova: Export alloc_iova_fast() and free_iova_fast()
  virtio-blk: remove unneeded "likely" statements
  virtio-balloon: Use virtio_find_vqs() helper
  vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
  vsock_test: update message bounds test for MSG_EOR
  af_vsock: rename variables in receive loop
  virtio/vsock: support MSG_EOR bit processing
  vhost/vsock: support MSG_EOR bit processing
  ...

Pull more RISC-V updates from Palmer Dabbelt:

 - A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.

 - A larger address space for stack randomization.

 - A cleanup to our install rules.

 - A DTS update for the Microchip Icicle board, to fix the serial
   console.

 - Support for build-time table sorting, which allows us to have
   __ex_table read-only.

* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move EXCEPTION_TABLE to RO_DATA segment
  riscv: Enable BUILDTIME_TABLE_SORT
  riscv: dts: microchip: mpfs-icicle: Fix serial console
  riscv: move the (z)install rules to arch/riscv/Makefile
  riscv: Improve stack randomisation on RV64
  riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
  riscv: defconfig: enable BLK_DEV_NVME

Pull coccinelle updates from Julia Lawall:
 "These changes update some existing semantic patches with
  respect to some recent changes in the kernel.

  Specifically, the change to kvmalloc.cocci searches for
  kfree_sensitive rather than kzfree, and the change to
  use_after_iter.cocci adds list_entry_is_head as a valid
  use of a list iterator index variable after the end of
  the loop"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccinelle: allow list_entry_is_head() to use pos
  coccinelle: api: rename kzfree to kfree_sensitive

Picking the changes from:

  17ce9c61 ("drm: document DRM_IOCTL_MODE_RMFB")

Doesn't result in any tooling changes:

  $ tools/perf/trace/beauty/drm_ioctl.sh  > before
  $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh  > after
  $ diff -u before after

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  b65a9489 ("drm/i915/userptr: Probe existence of backing struct pages upon creation")
  ee242ca7 ("drm/i915/guc: Implement GuC priority management")
  81340cf3 ("drm/i915/uapi: reject set_domain for discrete")
  7961c5b6 ("drm/i915: Add TTM offset argument to mmap.")
  aef7b67a ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc")
  e7737b67 ("drm/i915/uapi: reject caching ioctls for discrete")
  3aa8c57f ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc")
  289f5a72 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc")
  4a766ae4 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
  6ff6d61d ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP")
  fe4751c3 ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE")
  57772953 ("drm/i915: Document the Virtual Engine uAPI")
  c649432e ("drm/i915: Fix busy ioctl commentary")

That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the change in:

  7957d93b ("block: add ioctl to read the disk sequence number")

It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  db243b79 ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members")
  2d3e5caf ("net/ipv4: Replace one-element array with flexible-array member")

That don't result in any change in tooling, the structs changed remains
with the same layout.

This addresses this build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.

This was inspired by:

  https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#uSigned-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently perf saves a build-id with size but old versions assumes the
size of 20.  In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.

I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data.  The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.

  symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.

The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.

  $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf

  Displaying notes found in: .note.gnu.build-id
    Owner                Data size 	Description
    GNU                  0x00000010	NT_GNU_BUILD_ID (unique build ID bitstring)
      Build ID: 53e4c2f42a4c61a2d632d92a72afa08f

Let's fix this by allowing trailing zeros if the size is different.

Fixes: 39be8d01 ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A config terms list was spliced twice, resulting in a never-ending loop
when the list was traversed. Fix by using list_splice_init() and copying
and freeing the lists as necessary.

This patch also depends on patch "perf tools: Factor out
copy_config_terms() and free_config_terms()"

Example on ADL:

 Before:

  # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
  # jobs
  [1]+  Running                    perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname
  # perf top -E 10
    PerfTop:    4071 irqs/sec  kernel: 6.9%  exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles],  (all, 24 CPUs)
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    97.60%  perf           [.] __evsel__get_config_term
     0.25%  [kernel]       [k] kallsyms_expand_symbol.constprop.13
     0.24%  perf           [.] kallsyms__parse
     0.15%  [kernel]       [k] _raw_spin_lock
     0.14%  [kernel]       [k] number
     0.13%  [kernel]       [k] advance_transaction
     0.08%  [kernel]       [k] format_decode
     0.08%  perf           [.] map__process_kallsym_symbol
     0.08%  perf           [.] rb_insert_color
     0.08%  [kernel]       [k] vsnprintf
  exiting.
  # kill %1

After:

  # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.060 MB perf.data ]
  # perf script | head
       perf-exec   604 [001]  1827.312293:                            psb:  psb offs: 0                       ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms])

Fixes: 30def61f ("perf parse-events Create two hybrid cache events")
Fixes: 94da591b ("perf parse-events Create two hybrid raw events")
Fixes: 9cbfa2f6 ("perf parse-events Create two hybrid hardware events")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Factor out copy_config_terms() and free_config_terms() so that they can
be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Some fields are missing and text_poke is duplicated. Fix that up.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911120550.12203-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When building directly on the checked out repository the build process
produces a file that should be ignored, so add it to .gitignore.

Fixes: a81df63a ("perf doc: Fix doc.dep")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull io_uring fixes from Jens Axboe:

 - Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right
   now as we have plenty of flags left, but could become one. (Hao)

 - Fix lockdep issue introduced in this merge window (me)

 - Fix a few issues with the worker creation (me, Pavel, Qiang)

 - Fix regression with wq_has_sleeper() for IOPOLL (Pavel)

 - Timeout link error propagation fix (Pavel)

* tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
  io_uring: fail links of cancelled timeouts
  io-wq: fix memory leak in create_io_worker()
  io-wq: fix silly logic error in io_task_work_match()
  io_uring: drop ctx->uring_lock before acquiring sqd->lock
  io_uring: fix missing mb() before waitqueue_active
  io-wq: fix cancellation on create-worker failure

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
     - fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
     - update a MAINTAINERS email address (Chaitanya Kulkarni)
     - set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
     - handle errors from add_disk() (Luis Chamberlain)
     - update the keep alive interval when kato is modified (Tatsuya Sasaki)
     - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
     - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
     - only call synchronize_srcu when clearing current path (Daniel Wagner)
     - revalidate paths during rescan (Hannes Reinecke)

 - Split out the fs/block_dev into block/fops.c and block/bdev.c, which
   has been long overdue. Do this now before -rc1, to avoid annoying
   conflicts due to this (Christoph)

 - blk-throtl use-after-free fix (Li)

 - Improve plug depth for multi-device plugs, greatly increasing md
   resync performance (Song)

 - blkdev_show() locking fix (Tetsuo)

 - n64cart error check fix (Yang)

* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  n64cart: fix return value check in n64cart_probe()
  blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
  block: move fs/block_dev.c to block/bdev.c
  block: split out operations on block special files
  blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
  block: genhd: don't call blkdev_show() with major_names_lock held
  nvme: update MAINTAINERS email address
  nvme: add error handling support for add_disk()
  nvme: only call synchronize_srcu when clearing current path
  nvme: update keep alive interval when kato is modified
  nvme-tcp: Do not reset transport on data digest errors
  nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
  nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
  nvmet: looks at the passthrough controller when initializing CAP
  nvme: move nvme_multi_css into nvme.h
  nvme-multipath: revalidate paths during rescan
  nvme-multipath: set QUEUE_FLAG_NOWAIT

Pull libata maintainer update from Jens Axboe:
 "Damien agreed to take over maintainership of libata, and he would be a
  great candidate for it. Update the MAINTAINERS entry to reflect the
  change in maintainer and git tree"

* tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  libata: pass over maintainership to Damien Le Moal

Pull tracing fixes from Steven Rostedt:
 "Minor fixes to the processing of the bootconfig tree"

* tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()
  tracing/boot: Fix to check the histogram control param is a leaf node
  tracing/boot: Fix trace_boot_hist_add_array() to check array is value

Pull devicetree fixes from Rob Herring:

 - Disable fw_devlinks on x86 DT platforms to fix OLPC

 - More replacing oneOf+const with enum on a few new schemas

 - Drop unnecessary type references on Xilinx SPI binding schema

* tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  spi: dt-bindings: xilinx: Drop type reference on *-bits properties
  dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries
  of: property: Disable fw_devlink DT support for X86

Pull clk fix from Stephen Boyd:
 "One patch to fix an unused variable warning in a Qualcomm clk driver"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gcc-sm6350: Remove unused variable

Pull RTC updates from Alexandre Belloni:
 "The broken down time conversion is similar to what is done in the time
  subsystem since v5.14. The rest is fairly straightforward.

  Subsystem:
   - Switch to Neri and Schneider time conversion algorithm

  Drivers:
   - rx8025: add rx8035 support
   - s5m: modernize driver and set range"

* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: rx8010: select REGMAP_I2C
  dt-bindings: rtc: add Epson RX-8025 and RX-8035
  rtc: rx8025: implement RX-8035 support
  rtc: cmos: remove stale REVISIT comments
  rtc: tps65910: Correct driver module alias
  rtc: move RTC_LIB_KUNIT_TEST to proper location
  rtc: lib_test: add MODULE_LICENSE
  rtc: Improve performance of rtc_time64_to_tm(). Add tests.
  rtc: s5m: set range
  rtc: s5m: enable wakeup only when available
  rtc: s5m: signal the core when alarm are not available
  rtc: s5m: switch to devm_rtc_allocate_device

Pull firewire updates from Stefan Richter:

 - Migrate the bus snooper driver 'nosy' from PCI to DMA API

 - Small janitorial cleanup in the IPv4/v6-over-1394 driver

[ The 'nosy' change already come in as a different commit through Greg
  KH in the misc tree back in the previous merge window, so only the
  cleanup ends up being new to 5.15   - Linus ]

* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: nosy: switch from 'pci_' to 'dma_' API
  firewire: net: remove unused variable 'guid'

Merge tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The changes this time around are mostly janitorial in nature. A lot of
  this is simplifications of drivers using device-managed functions and
  improving compilation coverage.

  The Mediatek display PWM driver now supports the atomic API.

  Cleanups and minor fixes make up the remainder of this set"

* tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits)
  pwm: mtk-disp: Implement atomic API .get_state()
  pwm: mtk-disp: Fix overflow in period and duty calculation
  pwm: mtk-disp: Implement atomic API .apply()
  pwm: mtk-disp: Adjust the clocks to avoid them mismatch
  dt-bindings: pwm: rockchip: Add description for rk3568
  pwm: Make pwmchip_remove() return void
  pwm: sun4i: Don't check the return code of pwmchip_remove()
  pwm: sifive: Don't check the return code of pwmchip_remove()
  pwm: samsung: Don't check the return code of pwmchip_remove()
  pwm: renesas-tpu: Don't check the return code of pwmchip_remove()
  pwm: rcar: Don't check the return code of pwmchip_remove()
  pwm: pca9685: Don't check the return code of pwmchip_remove()
  pwm: omap-dmtimer: Don't check the return code of pwmchip_remove()
  pwm: mtk-disp: Don't check the return code of pwmchip_remove()
  pwm: imx-tpm: Don't check the return code of pwmchip_remove()
  pwm: img: Don't check the return code of pwmchip_remove()
  pwm: cros-ec: Don't check the return code of pwmchip_remove()
  pwm: brcmstb: Don't check the return code of pwmchip_remove()
  pwm: atmel-tcb: Don't check the return code of pwmchip_remove()
  pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove()
  ...

Pull thermal updates from Daniel Lezcano:

 - Add the tegra3 thermal sensor and fix the compilation testing on
   tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
   (Dmitry Osipenko)

 - Fix the error code for the exynos when devm_get_clk() fails (Dan
   Carpenter)

 - Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)

 - Add support for hardware trip points for the rcar gen3 thermal driver
   and store TSC id as unsigned int (Niklas Söderlund)

 - Replace the deprecated CPU-hotplug functions get_online_cpus() and
   put_online_cpus (Sebastian Andrzej Siewior)

 - Add the thermal tools directory in the MAINTAINERS file (Daniel
   Lezcano)

 - Fix the Makefile and the cross compilation flags for the userspace
   'tmon' tool (Rolf Eike Beer)

 - Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
   Pawnikar)

 - Fix the stub thermal_cooling_device_register() function prototype
   which does not match the real function (Arnd Bergmann)

 - Make the thermal trip point optional in the DT bindings (Maxime
   Ripard)

 - Fix a typo in a comment in the core code (Geert Uytterhoeven)

 - Reduce the verbosity of the trace in the SoC thermal tegra driver
   (Dmitry Osipenko)

 - Add the support for the LMh (Limit Management hardware) driver on the
   QCom platforms (Thara Gopinath)

 - Allow processing of HWP interrupt by adding a weak function in the
   Intel driver (Srinivas Pandruvada)

 - Prevent an abort of the sensor probe is a channel is not used
   (Matthias Kaehlcke)

* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
  thermal/drivers/intel: Allow processing of HWP interrupt
  dt-bindings: thermal: Add dt binding for QCOM LMh
  thermal/drivers/qcom: Add support for LMh driver
  firmware: qcom_scm: Introduce SCM calls to access LMh
  thermal/drivers/tegra-soctherm: Silence message about clamped temperature
  thermal: Spelling s/scallbacks/callbacks/
  dt-bindings: thermal: Make trips node optional
  thermal/core: Fix thermal_cooling_device_register() prototype
  thermal/drivers/int340x: Use IMOK independently
  tools/thermal/tmon: Add cross compiling support
  thermal/tools/tmon: Improve the Makefile
  MAINTAINERS: Add missing userspace thermal tools to the thermal section
  thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
  thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
  thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
  drivers/thermal/intel: Add TCC cooling support for AlderLake platform
  thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
  thermal/drivers/tegra: Correct compile-testing of drivers
  thermal/drivers/tegra: Add driver for Tegra30 thermal sensor

Pull input updates from Dmitry Torokhov:

 - several device tree bindings for input devices have been converted to
   yaml

 - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers

 - analog joystick has been converted to use ktime API and no longer
   warn about low resolution timers

 - a few driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: analog - always use ktime functions
  Input: mms114 - support MMS134S
  Input: elan_i2c - reduce the resume time for controller in Whitebox
  Input: edt-ft5x06 - added case for EDT EP0110M09
  Input: adc-keys - drop bogus __refdata annotation
  Input: Fix spelling mistake in Kconfig "useable" -> "usable"
  Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
  Input: remove dead CSR Prima2 PWRC driver
  Input: adp5589-keys - use the right header
  Input: adp5588-keys - use the right header
  dt-bindings: input: tsc2005: Convert to YAML schema
  Input: ep93xx_keypad - prepare clock before using it
  dt-bindings: input: sun4i-lradc: Add wakeup-source
  dt-bindings: input: Convert Regulator Haptic binding to a schema
  dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
  dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
  Input: pm8941-pwrkey - fix comma vs semicolon issue
  dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
  dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
  dt-bindings: power: reset: Change 'additionalProperties' to true
  ...

_ex_table section is read-only, so move it to RO_DATA.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>