Commit adfa543e ("dmatest: don't use set_freezable_with_signal()")
introduced a bug (that is in fact documented by the patch commit text)
that leaves behind a dangling pointer. Since the done_wait structure is
allocated on the stack, future invocations to the DMATEST can produce
undesirable results (e.g., corrupted spinlocks). Ideally, this would be
cleaned up in the thread handler, but at the very least, the kernel
is left in a very precarious scenario that can lead to some long debug
sessions when the crash comes later.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605Signed-off-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This reverts commit 847449f2: ("dmaengine: rcar-dmac: use TCRB instead
of TCR for residue") as it breaks small serial console.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Since commit 3cab1e71 ("lib/vsprintf: refactor duplicate code
to special_hex_number()") %pad doesn't need 0x prefix so drop that.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Since commit 3cab1e71 ("lib/vsprintf: refactor duplicate code
to special_hex_number()") %pad doesn't need 0x prefix so drop that.
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

As discussed at ELCE 2017 there is little to anticipate from me in the
future with regard to the driver, and since I have many things to keep
an eye on, I would like to step down to simple designated reviewer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Peter Senna Tschudin <peter.senna@collabora.com>
Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

By default, we build Broadcom SBA RAID driver as loadable module for
iProc SOCs so that kernel image is little smaller and we load SBA RAID
driver only when required.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This patch makes the comment header of Broadcom SBA RAID driver
similar to the GPL comment header used across Broadcom driver
sources.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Each mailbox channel used by Broadcom SBA RAID driver is
a separate HW ring.

Currently, Broadcom SBA RAID driver creates one DMA channel
using one or more mailbox channels. When we are using more
than one mailbox channels for a DMA channel, the sba_request
are distributed evenly among multiple mailbox channels which
results in sba_request being completed out-of-order.

The above described out-of-order completion of sba_request
breaks the dma_async_is_complete() API because it assumes
DMA cookies are completed in orderly fashion.

To ensure correct behaviour of dma_async_is_complete() API,
this patch updates Broadcom SBA RAID driver to use only
single mailbox channel. If additional mailbox channels are
specified in DT then those will be ignored.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

As-per documentation in driver/dma/dmaengine.h, the
dma_cookie_complete() API should be called with lock
held.

This patch ensures that Broadcom SBA RAID driver calls
the dma_cookie_complete() API with reqs_lock held.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

If two concurrent threads call pl330_get_desc() when DMAC descriptor
pool is empty it is possible that allocation for one of threads will fail
with message:

kernel: dma-pl330 20078000.dma-controller: pl330_get_desc:2469 ALERT!

Here how that can happen. Thread A calls pl330_get_desc() to get
descriptor. If DMAC descriptor pool is empty pl330_get_desc() allocates
new descriptor on shared pool using add_desc() and then get newly
allocated descriptor using pluck_desc(). At the same time thread B calls
pluck_desc() and take newly allocated descriptor. In that case descriptor
allocation for thread A will fail.

Using on-stack pool for new descriptor allow avoid the issue described.
The patch modify pl330_get_desc() to use on-stack pool for allocation
new descriptors.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

SYS/RT/Audio DMAC includes independent data buffers for reading
and writing. Therefore, the read transfer counter and write transfer
counter have different values.
TCR indicates read counter, and TCRB indicates write counter.
The relationship is like below.

        TCR       TCRB
[SOURCE] -> [DMAC] -> [SINK]

In the MEM_TO_DEV direction, what really matters is how much data has
been written to the device. If the DMA is interrupted between read and
write, then, the data doesn't end up in the destination, so shouldn't
be counted. TCRB is thus the register we should use in this cases.

In the DEV_TO_MEM direction, the situation is more complex. Both the
read and write side are important. What matters from a data consumer
point of view is how much data has been written to memory.
On the other hand, if the transfer is interrupted between read and
write, we'll end up losing data. It can also be important to report.

In the MEM_TO_MEM direction, what matters is of course how much data
has been written to memory from data consumer point of view.
Here, because read and write have independent data buffers, it will
take a while for TCR and TCRB to become equal. Thus we should check
TCRB in this case, too.

Thus, all cases we should check TCRB instead of TCR.

Without this patch, Sound Capture has noise after PluseAudio support
(= 07b7acb5 ("ASoC: rsnd: update pointer more accurate")), because
the recorder will use wrong residue counter which indicates transferred
from sound device, but in reality the data was not yet put to memory
and recorder will record it.
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
[Kuninori: added detail information in log]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Add runtime PM support to disable the clock when the h/w is not in use.
The existing clock_prepare_enable is removed from probe() as the clock
is no longer permanently enabled.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Add suspend / resume handling using suspend_late and resume_early, and
check that all channels are idle before suspending.

DMA drivers should use suspend_late / resume_early to ensure that all
DMA client devices are suspended before the DMA device itself, and that
client devices are resumed after the DMA device. This avoids suspending
the DMA device while transactions are still active.

It is the responsibility of client drivers to terminate all DMA
transactions in their suspend handlers, so there should be no active
transactions by the time suspend_late is called.

There's no need to save and restore registers for MDC during suspend /
resume, as all transactions will be terminated as a result of the
suspend, and all required registers are programmed anyway at the start
of any new transactions following resume.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Use the of_device_get_match_data() helper instead of open coding.
Note that when used with DT, there's always a valid match.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This patch adds support for r8a7743/5 SoCs. The Renesas RZ/G1[ME]
(R8A7743/5) usbdmac engine is identical to the R-Car Gen2 family.

No driver change is needed due to the fallback compatible value
"renesas,r8a7743-usb-dmac".
Adding the SoC-specific compatible values here has two purposes:
  1. Document which SoCs have this hardware module,
  2. Allow checkpatch to validate compatible values.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The bam dmaengine has a circular FIFO to which we
add hw descriptors that describes the transaction.
The FIFO has space for about 4096 hw descriptors.

Currently we add one descriptor and wait for it to
complete with interrupt and then add the next pending
descriptor. In this way, the FIFO is underutilized
since only one descriptor is processed at a time, although
there is space in FIFO for the BAM to process more.

Instead keep adding descriptors to FIFO till its full,
that allows BAM to continue to work on the next descriptor
immediately after signalling completion interrupt for the
previous descriptor.

Also when the client has not set the DMA_PREP_INTERRUPT for
a descriptor, then do not configure BAM to trigger a interrupt
upon completion of that descriptor. This way we get a interrupt
only for the descriptor for which DMA_PREP_INTERRUPT was
requested and there signal completion of all the previous completed
descriptors. So we still do callbacks for all requested descriptors,
but just that the number of interrupts are reduced.

CURRENT:

            ------      -------   ---------------
            |DES 0|     |DESC 1|  |DESC 2 + INT |
            ------      -------   ---------------
               |           |            |
               |           |            |
INTERRUPT:   (INT)       (INT)	      (INT)
CALLBACK:     (CB)        (CB)         (CB)

		MTD_SPEEDTEST READ PAGE: 3560 KiB/s
		MTD_SPEEDTEST WRITE PAGE: 2664 KiB/s
		IOZONE READ: 2456 KB/s
		IOZONE WRITE: 1230 KB/s

	bam dma interrupts (after tests): 96508

CHANGE:

        ------  -------    -------------
        |DES 0| |DESC 1   |DESC 2 + INT |
        ------  -------   --------------
				|
				|
          		      (INT)
			      (CB for 0, 1, 2)

		MTD_SPEEDTEST READ PAGE: 3860 KiB/s
		MTD_SPEEDTEST WRITE PAGE: 2837 KiB/s
		IOZONE READ: 2677 KB/s
		IOZONE WRITE: 1308 KB/s

	bam dma interrupts (after tests): 58806
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Tested-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The driver already supports DMA_DEV_TO_DEV in sdma_config(),
DMA_SLAVE_BUSWIDTH_2_BYTES and DMA_SLAVE_BUSWIDTH_1_BYTE in
sdma_prep_slave_sg(). So this patch adds them to the lists.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

struct dma_slave_caps documentation omitted the correct kernel-doc
opening comment mark.

Document byte granularity and interpretation of the src/dst_addr_widths
bit flag fields used by struct dma_slave_caps and struct dma_device.

Add punctuation to their "directions" member documentations, and cleanup
wording of the description.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Commit 93c6ee94 ("dma: Support for 3 bytes word size") and
commit 534a7298 ("dmaengine: Add 16 bytes, 32 bytes and 64 bytes
bus widths") added additional values for the allowed word size, but
omitted these from the struct dma_slave_config documentation.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

When running in software cyclic mode the driver currently does not go back
to the first segment once the last segment has been reached. Effectively
making the transfer non-cyclic.

Fix this by going back to the first segment once the last segment has been
reached for cyclic transfers.

Special care need to be taken to avoid a segment from being submitted
multiple times concurrently, which could happen for transfers with a number
of segments that is smaller than the DMA controller's internal queue.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

In hardware cyclic mode the submitted segment is repeated. This means
hardware cyclic mode can only be used if the transfer has a single segment.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Pull UBI updates from Richard Weinberger:
 "Minor improvements"

* tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: Fix two typos in comments
  ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate"
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines

Pull UML updates from Richard Weinberger:

 - minor improvements

 - fixes for Debian's new gcc defaults (pie enabled by default)

 - fixes for XSTATE/XSAVE to make UML work again on modern systems

* 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: return negative in tuntap_open_tramp()
  um: remove a stray tab
  um: Use relative modversions with LD_SCRIPT_DYN
  um: link vmlinux with -no-pie
  um: Fix CONFIG_GCOV for modules.
  Fix minor typos and grammar in UML start_up help
  um: defconfig: Cleanup from old Kconfig options
  um: Fix FP register size for XSTATE/XSAVE

Pull networking fixes from David Miller:

 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger.

 2) Fix double-free in rmnet driver, from Dan Carpenter.

 3) INET connection socket layer can double put request sockets, fix
    from Eric Dumazet.

 4) Don't match collect metadata-mode tunnels if the device is down,
    from Haishuang Yan.

 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in
    be2net driver, from Suresh Reddy.

 6) Fix scaling error in gen_estimator, from Eric Dumazet.

 7) Fix 64-bit statistics deadlock in systemport driver, from Florian
    Fainelli.

 8) Fix use-after-free in sctp_sock_dump, from Xin Long.

 9) Reject invalid BPF_END instructions in verifier, from Edward Cree.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  mlxsw: spectrum_router: Only handle IPv4 and IPv6 events
  Documentation: link in networking docs
  tcp: fix data delivery rate
  bpf/verifier: reject BPF_ALU64|BPF_END
  sctp: do not mark sk dumped when inet_sctp_diag_fill returns err
  sctp: fix an use-after-free issue in sctp_sock_dump
  netvsc: increase default receive buffer size
  tcp: update skb->skb_mstamp more carefully
  net: ipv4: fix l3slave check for index returned in IP_PKTINFO
  net: smsc911x: Quieten netif during suspend
  net: systemport: Fix 64-bit stats deadlock
  net: vrf: avoid gcc-4.6 warning
  qed: remove unnecessary call to memset
  tg3: clean up redundant initialization of tnapi
  tls: make tls_sw_free_resources static
  sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
  MAINTAINERS: review Renesas DT bindings as well
  net_sched: gen_estimator: fix scaling error in bytes/packets samples
  nfp: wait for the NSP resource to appear on boot
  nfp: wait for board state before talking to the NSP
  ...

Pull more input updates from Dmitry Torokhov:
 "A second round of updates for the input subsystem:

   - a new driver for PWM-controlled vibrators

   - ucb1400 touchscreen driver had completely busted suspend/resume
     handling

   - we now handle "home" button found on some devices with Goodix
     touchscreens

   - assorted other fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Gigabyte P57 to the keyboard reset table
  Input: xpad - validate USB endpoint type during probe
  Input: ucb1400_ts - fix suspend and resume handling
  Input: edt-ft5x06 - fix access to non-existing register
  Input: elantech - make arrays debounce_packet static, reduces object code size
  Input: surface3_spi - make const array header static, reduces object code size
  Input: goodix - add support for capacitive home button
  Input: add a driver for PWM controllable vibrators
  Input: adi - make array seq static, reduces object code size

Commit 5620a0d1 ("firmware: delete in-kernel firmware") removed the
entire firmware directory.  Unfortunately it thereby also removed the
support for built-in firmware.

This restores the ability to build firmware directly into the kernel by
pruning the original Makefile to the necessary minimum.  The default for
EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/.

Fixes: 5620a0d1 ("firmware: delete in-kernel firmware")
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Greg K-H <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The driver doesn't support events from address families other than IPv4
and IPv6, so ignore them. Otherwise, we risk queueing a work item before
it's initialized.

This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES
is enabled, as the VRF driver will try to add an l3mdev rule for the
IPMR family.

Fixes: 65e65ec1 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Andreas Rammhold <andreas@rammhold.de>
Reported-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix link in filter.txt.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>