- 12 Nov, 2013 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/apic fix from Ingo Molnar: "A single fix to the IO-APIC / local-APIC shutdown sequence" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Disable I/O APIC before shutdown of the local APIC
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer changes from Ingo Molnar: "Main changes in this cycle were: - Updated full dynticks support. - Event stream support for architected (ARM) timers. - ARM clocksource driver updates. - Move arm64 to using the generic sched_clock framework & resulting cleanup in the generic sched_clock code. - Misc fixes and cleanups" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC clocksource: sun4i: remove IRQF_DISABLED clocksource: sun4i: Report the minimum tick that we can program clocksource: sun4i: Select CLKSRC_MMIO clocksource: Provide timekeeping for efm32 SoCs clocksource: em_sti: convert to clk_prepare/unprepare time: Fix signedness bug in sysfs_get_uname() and its callers timekeeping: Fix some trivial typos in comments alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't exist clocksource: arch_timer: Do not register arch_sys_counter twice timer stats: Add a 'Collection: active/inactive' line to timer usage statistics sched_clock: Remove sched_clock_func() hook arch_timer: Move to generic sched_clock framework clocksource: tcb_clksrc: Remove IRQF_DISABLED clocksource: tcb_clksrc: Improve driver robustness clocksource: tcb_clksrc: Replace clk_enable/disable with clk_prepare_enable/disable_unprepare clocksource: arm_arch_timer: Use clocksource for suspend timekeeping clocksource: dw_apb_timer_of: Mark a few more functions as __init clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally arm: zynq: Enable arm_global_timer ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler changes from Ingo Molnar: "The main changes in this cycle are: - (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik van Riel, Peter Zijlstra et al. Yay! - optimize preemption counter handling: merge the NEED_RESCHED flag into the preempt_count variable, by Peter Zijlstra. - wait.h fixes and code reorganization from Peter Zijlstra - cfs_bandwidth fixes from Ben Segall - SMP load-balancer cleanups from Peter Zijstra - idle balancer improvements from Jason Low - other fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED stop_machine: Fix race between stop_two_cpus() and stop_cpus() sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus sched: Fix asymmetric scheduling for POWER7 sched: Move completion code from core.c to completion.c sched: Move wait code from core.c to wait.c sched: Move wait.c into kernel/sched/ sched/wait: Fix __wait_event_interruptible_lock_irq_timeout() sched: Avoid throttle_cfs_rq() racing with period_timer stopping sched: Guarantee new group-entities always have weight sched: Fix hrtimer_cancel()/rq->lock deadlock sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining sched: Fix race on toggling cfs_bandwidth_used sched: Remove extra put_online_cpus() inside sched_setaffinity() sched/rt: Fix task_tick_rt() comment sched/wait: Fix build breakage sched/wait: Introduce prepare_to_wait_event() sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too sched: Remove get_online_cpus() usage sched: Fix race in migrate_swap_stop() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Ingo Molnar: "As a first remark I'd like to note that the way to build perf tooling has been simplified and sped up, in the future it should be enough for you to build perf via: cd tools/perf/ make install (ie without the -j option.) The build system will figure out the number of CPUs and will do a parallel build+install. The various build system inefficiencies and breakages Linus reported against the v3.12 pull request should now be resolved - please (re-)report any remaining annoyances or bugs. Main changes on the perf kernel side: * Performance optimizations: . perf ring-buffer code optimizations, by Peter Zijlstra . perf ring-buffer code optimizations, by Oleg Nesterov . x86 NMI call-stack processing optimizations, by Peter Zijlstra . perf context-switch optimizations, by Peter Zijlstra . perf sampling speedups, by Peter Zijlstra . x86 Intel PEBS processing speedups, by Peter Zijlstra * Enhanced hardware support: . for Intel Ivy Bridge-EP uncore PMUs, by Zheng Yan . for Haswell transactions, by Andi Kleen, Peter Zijlstra * Core perf events code enhancements and fixes by Oleg Nesterov: . for uprobes, if fork() is called with pending ret-probes . for uprobes platform support code * New ABI details by Andi Kleen: . Report x86 Haswell TSX transaction abort cost as weight Main changes on the perf tooling side (some of these tooling changes utilize the above kernel side changes): * 'perf report/top' enhancements: . Convert callchain children list to rbtree, greatly reducing the time taken for callchain processing, from Namhyung Kim. . Add new COMM infrastructure, further improving histogram processing, from Frédéric Weisbecker, one fix from Namhyung Kim. . Add /proc/kcore based live-annotation improvements, including build-id cache support, multi map 'call' instruction navigation fixes, kcore address validation, objdump workarounds. From Adrian Hunter. . Show progress on histogram collapsing, that can take a long time, from Namhyung Kim. . Add --max-stack option to limit callchain stack scan in 'top' and 'report', improving callchain processing when reducing the stack depth is an option, from Waiman Long. . Add new option --ignore-vmlinux for perf top, from Willy Tarreau. * 'perf trace' enhancements: . 'perf trace' now can can use a 'perf probe' dynamic tracepoints to hook into the userspace -> kernel pathname copy so that it can map fds to pathnames without reading /proc/pid/fd/ symlinks. From Arnaldo Carvalho de Melo. . Show VFS path associated with fd in live sessions, using a 'vfs_getname' 'perf probe' created dynamic tracepoint or by looking at /proc/pid/fd, from Arnaldo Carvalho de Melo. . Add 'trace' beautifiers for lots of syscall arguments, from Arnaldo Carvalho de Melo. . Implement more compact 'trace' output by suppressing zeroed args, from Arnaldo Carvalho de Melo. . Show thread COMM by default in 'trace', from Arnaldo Carvalho de Melo. . Add option to show full timestamp in 'trace', from David Ahern. . Add 'record' command in 'trace', to record raw_syscalls:*, from David Ahern. . Add summary option to dump syscall statistics in 'trace', from David Ahern. . Improve error messages in 'trace', providing hints about system configuration steps needed for using it, from Ramkumar Ramachandra. . 'perf trace' now emits hints as to why tracing is not possible, helping the user to setup the system to allow tracing in the desired permission granularity, telling if the problem is due to debugfs not being mounted or with not enough permission for !root, /proc/sys/kernel/perf_event_paranoit value, etc. From Arnaldo Carvalho de Melo. * 'perf record' enhancements: . Check maximum frequency rate for record/top, emitting better error messages, from Jiri Olsa. . 'perf record' code cleanups, from David Ahern. . Improve write_output error message in 'perf record', from Adrian Hunter. . Allow specifying B/K/M/G unit to the --mmap-pages arguments, from Jiri Olsa. . Fix command line callchain attribute tests to handle the new -g/--call-chain semantics, from Arnaldo Carvalho de Melo. * 'perf kvm' enhancements: . Disable live kvm command if timerfd is not supported, from David Ahern. . Fix detection of non-core features, from David Ahern. * 'perf list' enhancements: . Add usage to 'perf list', from David Ahern. . Show error in 'perf list' if tracepoints not available, from Pekka Enberg. * 'perf probe' enhancements: . Support "$vars" meta argument syntax for local variables, allowing asking for all possible variables at a given probe point to be collected when it hits, from Masami Hiramatsu. * 'perf sched' enhancements: . Address the root cause of that 'perf sched' stack initialization build slowdown, by programmatically setting a big array after moving the global variable back to the stack. Fix from Adrian Hunter. * 'perf script' enhancements: . Set up output options for in-stream attributes, from Adrian Hunter. . Print addr by default for BTS in 'perf script', from Adrian Juntmer * 'perf stat' enhancements: . Improved messages when doing profiling in all or a subset of CPUs using a workload as the session delimitator, as in: 'perf stat --cpu 0,2 sleep 10s' from Arnaldo Carvalho de Melo. . Add units to nanosec-based counters in 'perf stat', from David Ahern. . Remove bogus info when using 'perf stat' -e cycles/instructions, from Ramkumar Ramachandra. * 'perf lock' enhancements: . 'perf lock' fixes and cleanups, from Davidlohr Bueso. * 'perf test' enhancements: . Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing and 'perf test', from Adrian Hunter. . Clarify the "sample parsing" test entry, from Arnaldo Carvalho de Melo. . Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test, from Arnaldo Carvalho de Melo. . Memory leak fixes in 'perf test', from Felipe Pena. * 'perf bench' enhancements: . Change the procps visible command-name of invididual benchmark tests plus cleanups, from Ingo Molnar. * Generic perf tooling infrastructure/plumbing changes: . Separating data file properties from session, code reorganization from Jiri Olsa. . Fix version when building out of tree, as when using one of these: $ make help | grep perf perf-tar-src-pkg - Build perf-3.12.0.tar source tarball perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball $ from David Ahern. . Enhance option parse error message, showing just the help lines of the options affected, from Namhyung Kim. . libtraceevent updates from upstream trace-cmd repo, from Steven Rostedt. . Always use perf_evsel__set_sample_bit to set sample_type, from Adrian Hunter. . Memory and mmap leak fixes from Chenggang Qin. . Assorted build fixes for from David Ahern and Jiri Olsa. . Speed up and prettify the build system, from Ingo Molnar. . Implement addr2line directly using libbfd, from Roberto Vitillo. . Separate the GTK support in a separate libperf-gtk.so DSO, that is only loaded when --gtk is specified, from Namhyung Kim. . perf bash completion fixes and improvements from Ramkumar Ramachandra. . Support for Openembedded/Yocto -dbg packages, from Ricardo Ribalda Delgado. And lots and lots of other fixes and code reorganizations that did not make it into the list, see the shortlog, diffstat and the Git log for details!" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits) uprobes: Fix the memory out of bound overwrite in copy_insn() uprobes: Fix the wrong usage of current->utask in uprobe_copy_process() perf tools: Remove unneeded include perf record: Remove post_processing_offset variable perf record: Remove advance_output function perf record: Refactor feature handling into a separate function perf trace: Don't relookup fields by name in each sample perf tools: Fix version when building out of tree perf evsel: Ditch evsel->handler.data field uprobes: Export write_opcode() as uprobe_write_opcode() uprobes: Introduce arch_uprobe->ixol uprobes: Kill module_init() and module_exit() uprobes: Move function declarations out of arch perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes perf: Factor out strncpy() in perf_event_mmap_event() tools/perf: Add required memory barriers perf: Fix arch_perf_out_copy_user default perf: Update a stale comment perf: Optimize perf_output_begin() -- address calculation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull leftover IRQ fixes from Ingo Molnar: "Two (minor) fixlets that missed v3.12" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Set the irq thread policy without checking CAP_SYS_NICE irq: DocBook/genericirq.tmpl: Correct various typos
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull IRQ changes from Ingo Molnar: "The biggest change this cycle are the softirq/hardirq stack interaction and nesting fixes, cleanups and reorganizations from Frederic. This is the longer followup story to the softirq nesting fix that is already upstream (commit ded79754: "irq: Force hardirq exit's softirq processing on its own stack")" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro powerpc: Tell about irq stack coverage x86: Tell about irq stack coverage irq: Optimize softirq stack selection in irq exit irq: Justify the various softirq stack choices irq: Improve a bit softirq debugging irq: Optimize call to softirq on hardirq exit irq: Consolidate do_softirq() arch overriden implementations x86/irq: Correct comment about i8259 initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU updates from Ingo Molnar: "The main RCU changes in this cycle are: - Idle entry/exit changes, to throttle callback execution and other refinements to speed up kbuild, primarily to address performance issues located by Tibor Billes. - Grace-period related changes, primarily to aid in debugging, inspired by an -rt debugging session. - Code reorganization moving RCU's source files into its own kernel/rcu/ directory. - RCU documentation updates - Miscellaneous fixes. Note, the following commit: 5c889690 mm: Place preemption point in do_mlockall() loop is identical to the commit already in your tree via email: 22356f44 mm: Place preemption point in do_mlockall() loop [ Your version of the changelog nicely demonstrates it how kernel oops messages should be trimmed properly :-/ ]" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) rcu: Move RCU-related source code to kernel/rcu directory rcu: Fix occurrence of "the the" in checklist.txt kthread: Add pointer to vmstat-avoidance patch rcu: Update stall-warning documentation rcu: Consistent rcu_is_watching() naming rcu: Change EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL() rcu: Is it safe to enter an RCU read-side critical section? rcu: Throttle invoke_rcu_core() invocations due to non-lazy callbacks rcu: Throttle rcu_try_advance_all_cbs() execution rcu: Remove redundant code from rcu_cleanup_after_idle() rcu: Fix CONFIG_RCU_NOCB_CPU_ALL panic on machines with sparse CPU mask rcu: Avoid sparse warnings in rcu_nocb_wake trace event rcu: Track rcu_nocb_kthread()'s sleeping and awakening rcu: Distinguish between NOCB and non-NOCB rcu_callback trace events rcu: Add tracing for rcuo no-CBs CPU wakeup handshake rcu: Add tracing of normal (non-NOCB) grace-period requests rcu: Add tracing to rcu_gp_kthread() rcu: Flag lockless access to ->gp_flags with ACCESS_ONCE() rcu: Prevent spurious-wakeup DoS attack on rcu_gp_kthread() rcu: Improve grace-period start logic ...
-
- 11 Nov, 2013 13 commits
-
-
Peter Zijlstra authored
Since the introduction of PREEMPT_NEED_RESCHED in: f27dde8d ("sched: Add NEED_RESCHED to the preempt_count") we need to be able to look at both TIF_NEED_RESCHED and PREEMPT_NEED_RESCHED to understand the full preemption behaviour. Add it to the trace output. Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Link: http://lkml.kernel.org/r/20131004152826.GP3081@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Rik van Riel authored
There is a race between stop_two_cpus, and the global stop_cpus. It is possible for two CPUs to get their stopper functions queued "backwards" from one another, resulting in the stopper threads getting stuck, and the system hanging. This can happen because queuing up stoppers is not synchronized. This patch adds synchronization between stop_cpus (a rare operation), and stop_two_cpus. Reported-and-Tested-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
Mel Gorman <mgorman@suse.de> Link: http://lkml.kernel.org/r/20131101104146.03d1e043@annuminas.surriel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC changes from Vineet Gupta: - Towards a working SMP setup (ASID allocation, TLB Flush,...) - Support for TRACE_IRQFLAGS, LOCKDEP - cacheflush backend consolidation for I/D - Lots of allmodconfig fixlets from Chen - Other improvements/fixes * tag 'arc-v3.13-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (25 commits) ARC: [plat-arcfpga] defconfig update smp, ARC: kill SMP single function call interrupt ARC: [SMP] Disallow RTSC ARC: [SMP] Fix build failures for large NR_CPUS ARC: [SMP] enlarge possible NR_CPUS ARC: [SMP] TLB flush ARC: [SMP] ASID allocation arc: export symbol for pm_power_off in reset.c arc: export symbol for save_stack_trace() in stacktrace.c arc: remove '__init' for get_hw_config_num_irq() arc: remove '__init' for first_lines_of_secondary() arc: remove '__init' for setup_processor() and arc_init_IRQ() arc: kgdb: add default implementation for kgdb_roundup_cpus() ARC: Fix bogus gcc warning and micro-optimise TLB iteration loop ARC: Add support for irqflags tracing and lockdep ARC: Reset the value of Interrupt Priority Register ARC: Reduce #ifdef'ery for unaligned access emulation ARC: Change calling convention of do_page_fault() ARC: cacheflush optim - PTAG can be loop invariant if V-P is const ARC: cacheflush refactor #3: Unify the {d,i}cache flush leaf helpers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: "Summary: - __put_user_unaligned may/will be used by btrfs - m68k part of a global cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Remove deprecated IRQF_DISABLED m68k/m68knommu: Implement __get_user_unaligned/__put_user_unaligned()
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc update from Helge Deller: - a bugfix for sticon (parisc text console driver) to not crash the 64bit kernel on machines with more than 4GB RAM - added kernel audit support - made udelay() implementation SMP-safe - "make install" now does not depend on vmlinux - added defconfigs for 32- and 64-kernels * 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: add generic 32- and 64-bit defconfigs parisc: sticon - unbreak on 64bit kernel parisc: signal fixup - SIGBUS vs. SIGSEGV parisc: implement full version of access_ok() parisc: correctly display number of active CPUs parisc: do not count IPI calls twice parisc: make udelay() SMP-safe parisc: remove duplicate define parisc: make "make install" not depend on vmlinux parisc: add kernel audit feature parisc: provide macro to create exception table entries
-
Ingo Molnar authored
Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core Pull uprobes fixes from Oleg Nesterov. Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. In this case it's involved: - Some Davinci driver updates that has required corresponding platform code changes (gpio mostly) - CCI bindings and a few driver updates - Marvell mvebu patches for PCI MSI support (could have gone through the PCI tree for this release, but they were acked by Bjorn for 3.12 so we kept them through arm-soc). - Marvell dove switch-over to DT-based PCIe configuration - Misc updates for Samsung platform dmaengine drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller ARM: S3C24XX: Fix possible dma selection warning PCI: mvebu: make local functions static PCI: mvebu: add I/O access wrappers PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug ARM: mvebu: fix gated clock documentation ARM: dove: remove legacy pcie and clock init ARM: dove: switch to DT probed mbus address windows ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 dmaengine: add driver for Samsung s3c24xx SoCs ARM: S3C24XX: number the dma clocks PCI: mvebu: add support for Marvell Dove SoCs PCI: mvebu: add support for reset on GPIO PCI: mvebu: remove subsys_initcall PCI: mvebu: increment nports only for registered ports PCI: mvebu: move clock enable before register access PCI: mvebu: add support for MSI irqchip: armada-370-xp: implement MSI support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC board updates from Olof Johansson: "Board-related updates. This branch is getting smaller and smaller, which is the whole idea so that's reassuring. Right now by far most of the code is related to shmobile updates, and they are now switching over to removal of board code and migration to multiplatform, so we'll see their board code base shrink in the near future too, I hope. In addition to that is some defconfig updates, some display updates for OMAP and a bit of new board support for Rockchip boards" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (56 commits) ARM: rockchip: add support for rk3188 and Radxa Rock board ARM: rockchip: add dts for bqcurie2 tablet ARM: rockchip: enable arm-global-timer ARM: rockchip: move shared dt properties to common source file ARM: OMAP2+: display: Create omap_vout device inside omap_display_init ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init ARM: OMAP2+: display: Create omapdrm device inside omap_display_init ARM: OMAP2+: drm: Don't build device for DMM ARM: tegra: defconfig updates RX-51: Add support for OMAP3 ROM Random Number Generator ARM: OMAP3: RX-51: ARM errata 430973 workaround ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1 ARM: shmobile: marzen: enable INTC IRQ ARM: shmobile: bockw: add SMSC support on reference ARM: shmobile: Use SMP on Koelsch ARM: shmobile: Remove KZM9D reference DTS ARM: shmobile: Let KZM9D multiplatform boot with KZM9D DTB ARM: shmobile: Remove non-multiplatform KZM9D reference support ARM: shmobile: Use KZM9D without reference for multiplatform ARM: shmobile: Sync KZM9D DTS with KZM9D reference DTS ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.13. Qualcomm msm targets had a bunch of code removal for legacy non-DT platforms. Nomadik saw more device tree conversions and cleanup of old code. Tegra has some code refactoring, etc. One longish patch series from Sebastian Hasselbarth changes the init_time hooks and tries to use a generic implementation for most platforms, since they were all doing more or less the same things. Finally the "shark" platform is removed in this release. It's been abandoned for a while and nobody seems to care enough to keep it around. If someone comes along and wants to resurrect it, the removal can easily be reverted and code brought back. Beyond this, mostly a bunch of removals of stale content across the board, etc" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (79 commits) ARM: gemini: convert to GENERIC_CLOCKEVENTS ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options ARM: OMAP3: control: add API for setting IVA bootmode ARM: OMAP3: CM/control: move CM scratchpad save to CM driver ARM: OMAP3: McBSP: do not access CM register directly ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock ARM: OMAP2: CM/PM: remove direct register accesses outside CM code MAINTAINERS: Add patterns for DTS files for AT91 ARM: at91: remove init_machine() as default is suitable ARM: at91/dt: split sama5d3 peripheral definitions ARM: at91/dt: split sam9x5 peripheral definitions ARM: Remove temporary sched_clock.h header ARM: clps711x: Use linux/sched_clock.h MAINTAINERS: Add DTS files to patterns for Samsung platform ARM: EXYNOS: remove unnecessary header inclusions from exynos4/5 dt machine file ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order clk: nomadik: fix missing __init on nomadik_src_init ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP ARM: S3C64XX: Kill CONFIG_PLAT_S3C64XX ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC low-priority fixes from Olof Johansson: "A set of fixes for various platforms that weren't considered bad enough to include in 3.12 (nor -stable). Mostly simple typo fixes, etc" * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP2+: irq, AM33XX add missing register check ARM: OMAP2+: wakeupgen: AM43x adaptation ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250 ARM: rockchip: remove obsolete rockchip,config properties ARM: rockchip: fix wrong use of non-existent CONFIG_LOCAL_TIMERS ARM: mach-omap1: Fix omap1510_fpga_init_irq() implicit declarations. ARM: OMAP1: fix incorrect placement of __initdata tag ARM: OMAP: remove deprecated IRQF_DISABLED ARM: OMAP2+: throw the die id into the entropy pool
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds authored
Pull ARM64 update from Catalin Marinas: "Main features: - Ticket-based spinlock implementation and lockless lockref support - Big endian support - CPU hotplug support, currently for PSCI (Power State Coordination Interface) capable firmware - Virtual address space extended to 42-bit in the 64K page configuration (maximum VA space with 2 levels of page tables) - Compat (AArch32) kuser helpers updated to ARMv8 (make use of load-acquire/store-release instructions) - Code cleanup, defconfig update and minor fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (43 commits) ARM64: /proc/interrupts: display IPIs of online CPUs only arm64: locks: Remove CONFIG_GENERIC_LOCKBREAK arm64: KVM: vgic: byteswap GICv2 access on world switch if BE arm64: KVM: initialize HYP mode following the kernel endianness arm64: compat: Clear the IT state independent of the 32-bit ARM or Thumb-2 mode arm64: Use 42-bit address space with 64K pages arm64: module: ensure instruction is little-endian before manipulation arm64: defconfig: Enable CONFIG_PREEMPT by default arm64: fix access to preempt_count from assembly code arm64: move enabling of GIC before CPUs are set online arm64: use generic RW_DATA_SECTION macro in linker script arm64: Slightly improve the warning on CPU0 enable-method ARM64: simplify cpu_read_bootcpu_ops using OF/DT helper ARM64: DT: define ARM64 specific arch_match_cpu_phys_id arm64: allow ioremap_cache() to use existing RAM mappings arm64: update 32-bit kuser helpers to ARMv8 arm64: perf: fix event number mask arm64: kconfig: allow CPU_BIG_ENDIAN to be selected arm64: Fix the endianness of arch_spinlock_t arm64: big-endian: write CPU holding pen address as LE ...
-
- 10 Nov, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmwLinus Torvalds authored
Pull gfs2 updates from Steven Whitehouse: "The main feature of interest this time is quota updates. There are some clean ups and some patches to use the new generic lru list code. There is still plenty of scope for some further changes in due course - faster lookups of quota structures is very much on the todo list. Also, a start has been made towards the more tricky issue of using the generic lru code with glocks, but that will have to be completed in a subsequent merge window. The other, more minor feature, is that there have been a number of performance patches which relate to block allocation. In particular they will improve performance when the disk is nearly full" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: GFS2: Use generic list_lru for quota GFS2: Rename quota qd_lru_lock qd_lock GFS2: Use reflink for quota data cache GFS2: Use lockref for glocks GFS2: Protect quota sync generation GFS2: Inline qd_trylock into gfs2_quota_unlock GFS2: Make two similar quota code fragments into a function GFS2: Remove obsolete quota tunable GFS2: Move gfs2_icbit_munge into quota.c GFS2: Speed up starting point selection for block allocation GFS2: Add allocation parameters structure GFS2: Clean up reservation removal GFS2: fix dentry leaks GFS2: new function gfs2_rbm_incr GFS2: Introduce rbm field bii GFS2: Do not reset flags on active reservations GFS2: introduce bi_blocks for optimization GFS2: optimize rbm_from_block wrt bi_start GFS2: d_splice_alias() can't return error
-
- 09 Nov, 2013 2 commits
-
-
Oleg Nesterov authored
1. copy_insn() doesn't look very nice, all calculations are confusing and it is not immediately clear why do we read the 2nd page first. 2. The usage of inode->i_size is wrong on 32-bit machines. 3. "Instruction at end of binary" logic is simply wrong, it doesn't handle the case when uprobe->offset > inode->i_size. In this case "bytes" overflows, and __copy_insn() writes to the memory outside of uprobe->arch.insn. Yes, uprobe_register() checks i_size_read(), but this file can be truncated after that. All i_size checks are racy, we do this only to catch the obvious mistakes. Change copy_insn() to call __copy_insn() in a loop, simplify and fix the bytes/nbytes calculations. Note: we do not care if we read extra bytes after inode->i_size if we got the valid page. This is fine because the task gets the same page after page-fault, and arch_uprobe_analyze_insn() can't know how many bytes were actually read anyway. Signed-off-by:
Oleg Nesterov <oleg@redhat.com>
-
Oleg Nesterov authored
Commit aa59c53f "uprobes: Change uprobe_copy_process() to dup xol_area" has a stupid typo, we need to setup t->utask->vaddr but the code wrongly uses current->utask. Even with this bug dup_xol_work() works "in practice", but only because get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE) likely returns the same address every time. Signed-off-by:
Oleg Nesterov <oleg@redhat.com>
-
- 07 Nov, 2013 17 commits
-
-
Linus Torvalds authored
Merge tag 'ftrace-urgent-3.12-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull perf/ftrace fix from Steven Rostedt: "Dave Jones's trinity program was able to enable the function tracer from a normal user account via the perf syscall "perf_event_open()". When I was able to reproduce it with trinity, I was able to track down exactly how it happened. I discovered that the check for whether the function tracepoint should be activated or not was using the "perf_paranoid_kernel()" check which by default, lets the user continue. The user should not by default be able to enable function tracing. The fix is to use "perf_paranoid_tracepoint_raw()" which will not let the user enable function tracing. This is a security fix as normal users should never be allowed to enable the function tracer" * tag 'ftrace-urgent-3.12-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: perf/ftrace: Fix paranoid level for enabling function tracer
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: - Some minor work bringing the Cobalt MIPS platforms in line with other MIPS platforms - Make vmlinux.32 and vmlinux.64 build messages less verbose - Always register the R4k clocksource when selected, the clock source's rating will decide if this or another clock source is actually going to be used - Drop support for the Cisco (formerly Scientific Atlanta) PowerTV platform. There appears to be nobody left who cares and the USB driver went stale while waiting for years to be merged - Some cleanup of Loongson 2 related #ifdefery - Various minor cleanups - Major rework on all things related to tracing / ptrace on MIPS, including switching the MIPS ELF core dumper to regsets, enabling the entries for SIGSYS in struct siginfo for MIPS, enabling ftrace syscall trace points - Some more work to bring DECstation support code in line with other more modern code - Report the name of the detected CPU, not just its CP0 PrID value - Some more BCM 47xx and atheros ath79xx work - Support for compressed kernels using the XZ compression scheme * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (53 commits) MIPS: remove duplicate define MIPS: Random whitespace clean-ups MIPS: traps: Reformat notify_die invocations to 80 columns. MIPS: Print correct PC in trace dump after NMI exception MIPS: kernel: cpu-probe: Report CPU id during probe MIPS: Remove unused defines in piix4.h MIPS: Get rid of hard-coded values for Malta PIIX4 fixups MIPS: Always register R4K clock when selected MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over arch/mips. MIPS: cacheops.h: Increase indentation by one tab. MIPS: Remove bogus BUG_ON() MIPS: PowerTV: Remove support code. MIPS: ftrace: Add support for syscall tracepoints. MIPS: ptrace: Switch syscall reporting to tracehook_report_syscall_entry(). MIPS: Move audit_arch() helper function to __syscall_get_arch(). MIPS: Enable HAVE_ARCH_TRACEHOOK. MIPS: Switch ELF core dumper to use regsets. MIPS: Implement task_user_regset_view. MIPS: ptrace: Use tracehook helpers. MIPS: O32 / 32-bit: Always copy 4 stack arguments. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: "The bulk of the patches for the 3.13 merge window. Heiko spent quite a bit of work to improve the code generation for the kernel. That includes the exploitation of the interlocked-access facility for the atomics and bitops implementation and the improvement for the -march and -mtune compiler settings. Another important change is the removal of the user_mode=home option, user processes now always run in primary space. The storage keys are not initialized at system startup any more, with that the storage key removal work is complete. For the PCI support the hibernation hooks have been implemented. And as usual cleanup and fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits) s390/scm_blk: fix endless loop for requests != REQ_TYPE_FS s390/mm,tlb: correct tlb flush on page table upgrade s390/mm: page_table_realloc returns failure s390: allow to set gcc -mtune flag s390/percpu: remove this_cpu_xor() implementation s390/vtime: correct idle time calculation s390/time: fix get_tod_clock_ext inline assembly tty/hvc_iucv: remove redundant NULL check s390/dasd: Write to profile data area only if it is available s390: convert use of typedef ctl_table to struct ctl_table s390/pci: cleanup function information block s390/pci: remove CONFIG_PCI_DEBUG dependancy s390/pci: message cleanup Update default configuration s390: add a couple of useful defconfigs s390/percpu: make use of interlocked-access facility 1 instructions s390/percpu: use generic percpu ops for CONFIG_32BIT s390/compat: make psw32_user_bits a constant value again s390: fix handling of runtime instrumentation psw bit s390: fix save and restore of the floating-point-control register ...
-
Helge Deller authored
New defconfigs which should be able to boot on any 32/64bit machine. Many drivers are selected to be compiled-in to avoid the need for an additional initrd and still being able to boot. Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
STI text console (sticon) was broken on 64bit machines with more than 4GB RAM and this lead in some cases to a kernel crash. Since sticon uses the 32bit STI API it needs to keep pointers to memory below 4GB. But on a 64bit kernel some memory regions (e.g. the kernel stack) might be above 4GB which then may crash the kernel in the STI functions. Additionally sticon didn't selected the built-in framebuffer fonts by default. This is now fixed. On a side-note: Theoretically we could enhance the sticon driver to use the 64bit STI API. But - beside the fact that some machines don't provide a 64bit STI ROM - this would just add complexity. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.8+
-
Helge Deller authored
Clean up code to send correct signal on invalid memory accesses: Send SIGBUS instead of SIGSEGV for memory accesses outside of mmap'ed areas This fixes the mmap13 testcase from the Linux Test Project. Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
Up to now PA-RISC could live with a trivial version of access_ok(). Our fault handlers can correctly handle fault cases. But testcases showed that we need a better access check else we won't always return correct errno failure codes to userspace. Problem showed up during 32bit userspace tests in which writev() used a 32bit memory area and length which would then wrap around on 64bit kernel. Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
In case we fail to power up other CPUs in a SMP system, the kernel currently shows a wrong number of online CPUs. This change makes the output more verbose on how many of the CPUs are online. Example: CPU(s): 1 out of 2 PA8800 (Mako) at 900.000000 MHz online. Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
The number of IPI calls is already visible as per-cpu IPI irq counters in/proc/cpuinfo, so let's drop this additional counting. This partly reverts: cd85d551 parisc: more irq statistics in /proc/interrupts Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
Each CPU has it's own Control Register 16 (CR16) which is used as time source for the udelay() function. But since the CR16 registers across different CPUs are not synced, we need to recalculate the loop count if we get switched away to ensure that we really delay as much time as requested. Signed-off-by:
Helge Deller <deller@gmx.de>
-
Michael Opdenacker authored
This patch removes a duplicate define from arch/parisc/math-emu/float.h Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
Install targets (install, zinstall, uinstall) on parisc have a dependency to vmlinux. This may cause parts of the kernel to be rebuilt during installation. We must avoid this since this may run as root. Install targets "ABSOLUTELY MUST NOT MODIFY THE SOURCE TREE." as Linus emphasized this in: http://lkml.org/lkml/2013/7/10/600 So on parisc and maybe other archs we need the same as for x86: 1648e4f8 x86, kbuild: make "make install" not depend on vmlinux This parisc patch was inspired by: 19514fc6 arm, kbuild: make "make install" not depend on vmlinux Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
Implement missing functions for parisc to provide kernel audit feature. Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
Provide a macro ASM_EXCEPTIONTABLE_ENTRY() to create exception table entries and convert all open-coded places to use that macro. This patch is a first step toward creating a exception table which only holds 32bit pointers even on a 64bit kernel. That way in my own kernel I was able to reduce the in-kernel exception table from 44kB to 22kB. Signed-off-by:
Helge Deller <deller@gmx.de>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS updates from Steve French: "Includes a couple of fixes, plus changes to make multiplex identifiers easier to read and correlate with network traces, and a set of enhancements for SMB3 dialect. Also adds support for per-file compression for both cifs and smb2/smb3 ("chattr +c filename). Should have at least one other merge request ready by next week with some new SMB3 security features and copy offload support" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: Query network adapter info at mount time for debugging Fix unused variable warning when CIFS POSIX disabled Allow setting per-file compression via CIFS protocol Query File System Alignment Query device characteristics at mount time from server on SMB2/3 not just on cifs mounts cifs: Send a logoff request before removing a smb session cifs: Make big endian multiplex ID sequences monotonic on the wire cifs: Remove redundant multiplex identifier check from check_smb_hdr() Query file system attributes from server on SMB2, not just cifs, mounts Allow setting per-file compression via SMB2/3 Fix corrupt SMB2 ioctl requests
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Highlights include: - Changes to the RPC socket code to allow NFSv4 to turn off timeout+retry: * Detect TCP connection breakage through the "keepalive" mechanism - Add client side support for NFSv4.x migration (Chuck Lever) - Add support for multiple security flavour arguments to the "sec=" mount option (Dros Adamson) - fs-cache bugfixes from David Howells: * Fix an issue whereby caching can be enabled on a file that is open for writing - More NFSv4 open code stable bugfixes - Various Labeled NFS (selinux) bugfixes, including one stable fix - Fix buffer overflow checking in the RPCSEC_GSS upcall encoding" * tag 'nfs-for-3.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits) NFSv4.2: Remove redundant checks in nfs_setsecurity+nfs4_label_init_security NFSv4: Sanity check the server reply in _nfs4_server_capabilities NFSv4.2: encode_readdir - only ask for labels when doing readdirplus nfs: set security label when revalidating inode NFSv4.2: Fix a mismatch between Linux labeled NFS and the NFSv4.2 spec NFS: Fix a missing initialisation when reading the SELinux label nfs: fix oops when trying to set SELinux label nfs: fix inverted test for delegation in nfs4_reclaim_open_state SUNRPC: Cleanup xs_destroy() SUNRPC: close a rare race in xs_tcp_setup_socket. SUNRPC: remove duplicated include from clnt.c nfs: use IS_ROOT not DCACHE_DISCONNECTED SUNRPC: Fix buffer overflow checking in gss_encode_v0_msg/gss_encode_v1_msg SUNRPC: gss_alloc_msg - choose _either_ a v0 message or a v1 message SUNRPC: remove an unnecessary if statement nfs: Use PTR_ERR_OR_ZERO in 'nfs/nfs4super.c' nfs: Use PTR_ERR_OR_ZERO in 'nfs41_callback_up' function nfs: Remove useless 'error' assignment sunrpc: comment typo fix SUNRPC: Add correct rcu_dereference annotation in rpc_clnt_set_transport ...
-
Sudeep KarkadaNagesha authored
The non-IPI interrupts are displayed only for the online cpus from show_interrupts in kernel/irq/proc.c before calling arch_show_interrupts(). As a result, the column headers and the IPI count don't match if any CPU is offline. This patch fixes show_ipi_list to display IPIs for online CPUs only. Signed-off-by:
Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-