- 16 Jul, 2020 36 commits
-
-
Mikulas Patocka authored
Set the flag CRYPTO_ALG_ALLOCATES_MEMORY in the crypto drivers that allocate memory. drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c: sun8i_ce_cipher drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c: sun8i_ss_cipher drivers/crypto/amlogic/amlogic-gxl-core.c: meson_cipher drivers/crypto/axis/artpec6_crypto.c: artpec6_crypto_common_init drivers/crypto/bcm/cipher.c: spu_skcipher_rx_sg_create drivers/crypto/caam/caamalg.c: aead_edesc_alloc drivers/crypto/caam/caamalg_qi.c: aead_edesc_alloc drivers/crypto/caam/caamalg_qi2.c: aead_edesc_alloc drivers/crypto/caam/caamhash.c: hash_digest_key drivers/crypto/cavium/cpt/cptvf_algs.c: process_request drivers/crypto/cavium/nitrox/nitrox_aead.c: nitrox_process_se_request drivers/crypto/cavium/nitrox/nitrox_skcipher.c: nitrox_process_se_request drivers/crypto/ccp/ccp-crypto-aes-cmac.c: ccp_do_cmac_update drivers/crypto/ccp/ccp-crypto-aes-galois.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-aes-xts.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-aes.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-des3.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-sha.c: ccp_crypto_enqueue_request drivers/crypto/chelsio/chcr_algo.c: create_cipher_wr drivers/crypto/hisilicon/sec/sec_algs.c: sec_alloc_and_fill_hw_sgl drivers/crypto/hisilicon/sec2/sec_crypto.c: sec_alloc_req_id drivers/crypto/inside-secure/safexcel_cipher.c: safexcel_queue_req drivers/crypto/inside-secure/safexcel_hash.c: safexcel_ahash_enqueue drivers/crypto/ixp4xx_crypto.c: ablk_perform drivers/crypto/marvell/cesa/cipher.c: mv_cesa_skcipher_dma_req_init drivers/crypto/marvell/cesa/hash.c: mv_cesa_ahash_dma_req_init drivers/crypto/marvell/octeontx/otx_cptvf_algs.c: create_ctx_hdr drivers/crypto/n2_core.c: n2_compute_chunks drivers/crypto/picoxcell_crypto.c: spacc_sg_to_ddt drivers/crypto/qat/qat_common/qat_algs.c: qat_alg_skcipher_encrypt drivers/crypto/qce/skcipher.c: qce_skcipher_async_req_handle drivers/crypto/talitos.c : talitos_edesc_alloc drivers/crypto/virtio/virtio_crypto_algs.c: __virtio_crypto_skcipher_do_req drivers/crypto/xilinx/zynqmp-aes-gcm.c: zynqmp_aes_aead_cipher Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> [EB: avoid overly-long lines] Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
Introduce a new algorithm flag CRYPTO_ALG_ALLOCATES_MEMORY. If this flag is set, then the driver allocates memory in its request routine. Such drivers are not suitable for disk encryption because GFP_ATOMIC allocation can fail anytime (causing random I/O errors) and GFP_KERNEL allocation can recurse into the block layer, causing a deadlock. For now, this flag is only implemented for some algorithm types. We also assume some usage constraints for it to be meaningful, since there are lots of edge cases the crypto API allows (e.g., misaligned or fragmented scatterlists) that mean that nearly any crypto algorithm can allocate memory in some case. See the comment for details. Also add this flag to CRYPTO_ALG_INHERITED_FLAGS so that when a template is instantiated, this flag is set on the template instance if it is set on any algorithm the instance uses. Based on a patch by Mikulas Patocka <mpatocka@redhat.com> (https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com). Signed-off-by:
-
Eric Biggers authored
CRYPTO_ALG_NEED_FALLBACK is handled inconsistently. When it's requested to be clear, some templates propagate that request to child algorithms, while others don't. It's apparently desired for NEED_FALLBACK to be propagated, to avoid deadlocks where a module tries to load itself while it's being initialized, and to avoid unnecessarily complex fallback chains where we have e.g. cbc-aes-$driver falling back to cbc(aes-$driver) where aes-$driver itself falls back to aes-generic, instead of cbc-aes-$driver simply falling back to cbc(aes-generic). There have been a number of fixes to this effect: commit 89027579 ("crypto: xts - Propagate NEED_FALLBACK bit") commit d2c2a85c ("crypto: ctr - Propagate NEED_FALLBACK bit") commit e6c2e65c ("crypto: cbc - Propagate NEED_FALLBACK bit") But it seems that other templates can have the same problems too. To avoid this whack-a-mole, just add NEED_FALLBACK to INHERITED_FLAGS so that it's always inherited. Signed-off-by:
-
Eric Biggers authored
The flag CRYPTO_ALG_ASYNC is "inherited" in the sense that when a template is instantiated, the template will have CRYPTO_ALG_ASYNC set if any of the algorithms it uses has CRYPTO_ALG_ASYNC set. We'd like to add a second flag (CRYPTO_ALG_ALLOCATES_MEMORY) that gets "inherited" in the same way. This is difficult because the handling of CRYPTO_ALG_ASYNC is hardcoded everywhere. Address this by: - Add CRYPTO_ALG_INHERITED_FLAGS, which contains the set of flags that have these inheritance semantics. - Add crypto_algt_inherited_mask(), for use by template ->create() methods. It returns any of these flags that the user asked to be unset and thus must be passed in the 'mask' to crypto_grab_*(). - Also modify crypto_check_attr_type() to handle computing the 'mask' so that most templates can just use this. - Make crypto_grab_*() propagate these flags to the template instance being created so that templates don't have to do this themselves. Make crypto/simd.c propagate these flags too, since it "wraps" another algorithm, similar to a template. Based on a patch by Mikulas Patocka <mpatocka@redhat.com> (https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com). Signed-off-by: -
Eric Biggers authored
seqiv_create() is pointless because it just checks that the template is being instantiated as an AEAD, then calls seqiv_aead_create(). But seqiv_aead_create() does the exact same check, via aead_geniv_alloc(). Just remove seqiv_create() and use seqiv_aead_create() directly. Signed-off-by:
-
Eric Biggers authored
The type and mask arguments to aead_geniv_alloc() are always 0, so remove them. Signed-off-by:
-
Uros Bizjak authored
Current minimum required version of binutils is 2.23, which supports PSHUFB, PCLMULQDQ, PEXTRD, AESKEYGENASSIST, AESIMC, AESENC, AESENCLAST, AESDEC, AESDECLAST and MOVQ instruction mnemonics. Substitute macros from include/asm/inst.h with a proper instruction mnemonics in various assmbly files from x86/crypto directory, and remove now unneeded file. The patch was tested by calculating and comparing sha256sum hashes of stripped object files before and after the patch, to be sure that executable code didn't change. Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: Borislav Petkov <bp@alien8.de> CC: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Herbert Xu authored
This patch kills an strncpy by using strscpy instead. The name would be silently truncated if it is too long. Signed-off-by:
John Allen <john.allen@amd.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Eric Biggers authored
Now that there's a function that calculates the SHA-256 digest of a buffer in one step, use it instead of sha256_init() + sha256_update() + sha256_final(). Also simplify the code by inlining calculate_sha256() into its caller and switching a debug log statement to use %*phN instead of bin2hex(). Acked-by:
Tzung-Bi Shih <tzungbi@google.com> Reviewed-by:
Ard Biesheuvel <ardb@kernel.org> Cc: alsa-devel@alsa-project.org Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Guenter Roeck <groeck@chromium.org> Cc: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Eric Biggers authored
Now that there's a function that calculates the SHA-256 digest of a buffer in one step, use it instead of sha256_init() + sha256_update() + sha256_final(). Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Cc: mptcp@lists.01.org Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Eric Biggers authored
Now that there's a function that calculates the SHA-256 digest of a buffer in one step, use it instead of sha256_init() + sha256_update() + sha256_final(). Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Eric Biggers authored
Add a function sha256() which computes a SHA-256 digest in one step, combining sha256_init() + sha256_update() + sha256_final(). This is similar to how we also have blake2s(). Reviewed-by:
-
Eric Biggers authored
To avoid a naming collision when we add a sha256() library function, rename the "sha256" static variable in sha256_glue.c to "sha256_alg". For consistency, also rename "sha224" to "sha224_alg". Reported-by:
kernel test robot <lkp@intel.com> Cc: sparclinux@vger.kernel.org Signed-off-by:
-
Ard Biesheuvel authored
Due to the fact that the x86 port does not support allocating objects on the stack with an alignment that exceeds 8 bytes, we have a rather ugly hack in the x86 code for ChaCha to ensure that the state array is aligned to 16 bytes, allowing the SSE3 implementation of the algorithm to use aligned loads. Given that the performance benefit of using of aligned loads appears to be limited (~0.25% for 1k blocks using tcrypt on a Corei7-8650U), and the fact that this hack has leaked into generic ChaCha code, let's just remove it. Cc: Martin Willi <martin@strongswan.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by:
Martin Willi <martin@strongswan.org> Reviewed-by:
-
Herbert Xu authored
This patch adds a declaration for chacha20poly1305_selftest to silence a sparse warning. Signed-off-by: -
Ard Biesheuvel authored
The Mediatek accelerator driver calls into a dynamically allocated skcipher of the ctr(aes) variety to perform GCM key derivation, which involves AES encryption of a single block consisting of NUL bytes. There is no point in using the skcipher API for this, so use the AES library interface instead. Signed-off-by:
-
Ard Biesheuvel authored
Even though the sahara driver implements asynchronous versions of ecb(aes) and cbc(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Ard Biesheuvel authored
Even though the qce driver implements asynchronous versions of ecb(aes), cbc(aes)and xts(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. While at it, remove the pointless memset() from qce_skcipher_init(), and remove the call to it qce_skcipher_init_fallback(). Signed-off-by:
-
Ard Biesheuvel authored
Even though the picoxcell driver implements asynchronous versions of ecb(aes) and cbc(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
Jamie Iles <jamie@jamieiles.com> Signed-off-by:
-
Ard Biesheuvel authored
Even though the mxs-dcp driver implements asynchronous versions of ecb(aes) and cbc(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
-
Ard Biesheuvel authored
Even though the chelsio driver implements asynchronous versions of cbc(aes) and xts(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
-
Ard Biesheuvel authored
Even though the ccp driver implements an asynchronous version of xts(aes), the fallback it allocates is required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
-
Ard Biesheuvel authored
Even though the sun8i-ss driver implements asynchronous versions of ecb(aes) and cbc(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Ard Biesheuvel authored
Even though the sun8i-ce driver implements asynchronous versions of ecb(aes) and cbc(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
-
Ard Biesheuvel authored
Even though the sun4i driver implements asynchronous versions of ecb(aes) and cbc(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
-
Ard Biesheuvel authored
Even though the omap-aes driver implements asynchronous versions of ecb(aes), cbc(aes) and ctr(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
-
Ard Biesheuvel authored
Even though the amlogic-gxl driver implements asynchronous versions of ecb(aes) and cbc(aes), the fallbacks it allocates are required to be synchronous. Given that SIMD based software implementations are usually asynchronous as well, even though they rarely complete asynchronously (this typically only happens in cases where the request was made from softirq context, while SIMD was already in use in the task context that it interrupted), these implementations are disregarded, and either the generic C version or another table based version implemented in assembler is selected instead. Since falling back to synchronous AES is not only a performance issue, but potentially a security issue as well (due to the fact that table based AES is not time invariant), let's fix this, by allocating an ordinary skcipher as the fallback, and invoke it with the completion routine that was given to the outer request. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Ard Biesheuvel authored
The AmLogic GXL crypto accelerator driver is built into the kernel if ARCH_MESON is set. However, given the single image policy of arm64, its defconfig enables all platforms by default, and so ARCH_MESON is usually enabled. This means that the AmLogic driver causes the arm64 defconfig build to pull in a huge chunk of the crypto stack as a builtin as well, which is undesirable, so let's make the amlogic GXL driver default to 'm' instead. Signed-off-by:
-
Herbert Xu authored
There are multiple things in this file that requires kernel.h but it's only included through other header files indirectly. This patch adds a direct inclusion as those indirect inclusions may go away at any point. Signed-off-by: -
Longfang Liu authored
Modify some log output interfaces and update author information Signed-off-by:
Longfang Liu <liulongfang@huawei.com> Signed-off-by:
-
Longfang Liu authored
Update debugfs interface parameters, and adjust the processing logic inside the corresponding function Signed-off-by:
-
Longfang Liu authored
Updates the initialization and reset of SEC driver's register operation. Signed-off-by:
-
Kai Ye authored
As before, if a SEC queue is at the 'fake busy' status, the request with a 'fake busy' flag will be sent into hardware and the sending function returns busy. After the request is finished, SEC driver's call back will identify the 'fake busy' flag, and notifies the user that hardware is not busy now by calling user's call back function. Now, a request sent into busy hardware will be cached in the SEC queue's backlog, return '-EBUSY' to user. After the request being finished, the cached requests will be processed in the call back function. to notify the corresponding user that SEC queue can process more requests. Signed-off-by:
Kai Ye <yekai13@huawei.com> Reviewed-by:
-
Kai Ye authored
SEC debug registers aren't cleared even if its driver is removed, so add a clearing operation in driver removing. Signed-off-by:
-
Herbert Xu authored
The arc4 algorithm requires storing state in the request context in order to allow more than one encrypt/decrypt operation. As this driver does not seem to do that, it means that using it for more than one operation is broken. Fixes: eaed71a4 ("crypto: caam - add ecb(*) support") Link: https://lore.kernel.org/linux-crypto/CAMj1kXGvMe_A_iQ43Pmygg9xaAM-RLy=_M=v+eg--8xNmv9P+w@mail.gmail.com Link: https://lore.kernel.org/linux-crypto/20200702101947.682-1-ardb@kernel.orgSigned-off-by:
-
- 09 Jul, 2020 4 commits
-
-
Ard Biesheuvel authored
Of the two versions of GHASH that the ARM driver implements, only one performs aggregation, and so the other one has no use for the powers of H to be precomputed, or space to be allocated for them in the key struct. So make the context size dependent on which version is being selected, and while at it, use a static key to carry this decision, and get rid of the function pointer. Signed-off-by:
-
Ard Biesheuvel authored
Introduce an inline wrapper for ghash_do_update() that incorporates the indirect call to the asm routine that is passed as an argument, and keep the non-SIMD fallback code out of line. This ensures that all references to the function pointer are inlined where the address is taken, removing the need for any indirect calls to begin with. Signed-off-by:
-
Ard Biesheuvel authored
Now that the ghash and gcm drivers are split, we no longer need to allocate a key struct for the former that carries powers of H that are only used by the latter. Also, take this opportunity to clean up the code a little bit. Signed-off-by:
-
Ard Biesheuvel authored
The remaining ghash implementation does not support aggregation, and so there is no point in including the precomputed powers of H in the key struct. So move that into the GCM setkey routine, and get rid of the shared sub-routine entirely. Signed-off-by:
-
