Saeed Mahameed says:

====================
mlx5 fixes 2023-08-07

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Add capability check for vnic counters
  net/mlx5: Reload auxiliary devices in pci error handlers
  net/mlx5: Skip clock update work when device is in error state
  net/mlx5: LAG, Check correct bucket when modifying LAG
  net/mlx5e: Unoffload post act rule when handling FIB events
  net/mlx5: Fix devlink controller number for ECVF
  net/mlx5: Allow 0 for total host VFs
  net/mlx5: Return correct EC_VF function ID
  net/mlx5: DR, Fix wrong allocation of modify hdr pattern
  net/mlx5e: TC, Fix internal port memory leak
  net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()
====================

Link: https://lore.kernel.org/r/20230807212607.50883-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver

There are some bugfix for the HNS3 ethernet driver

v1: https://lore.kernel.org/all/20230728075840.4022760-2-shaojijie@huawei.com/
====================

Link: https://lore.kernel.org/r/20230807113452.474224-1-shaojijie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When externel_lb and reset are executed together, a deadlock may
occur:
[ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds.
[ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3147.238999] task:kworker/u321:0  state:D stack:    0 pid:    7 ppid:     2 flags:0x00000008
[ 3147.248045] Workqueue: hclge hclge_service_task [hclge]
[ 3147.253957] Call trace:
[ 3147.257093]  __switch_to+0x7c/0xbc
[ 3147.261183]  __schedule+0x338/0x6f0
[ 3147.265357]  schedule+0x50/0xe0
[ 3147.269185]  schedule_preempt_disabled+0x18/0x24
[ 3147.274488]  __mutex_lock.constprop.0+0x1d4/0x5dc
[ 3147.279880]  __mutex_lock_slowpath+0x1c/0x30
[ 3147.284839]  mutex_lock+0x50/0x60
[ 3147.288841]  rtnl_lock+0x20/0x2c
[ 3147.292759]  hclge_reset_prepare+0x68/0x90 [hclge]
[ 3147.298239]  hclge_reset_subtask+0x88/0xe0 [hclge]
[ 3147.303718]  hclge_reset_service_task+0x84/0x120 [hclge]
[ 3147.309718]  hclge_service_task+0x2c/0x70 [hclge]
[ 3147.315109]  process_one_work+0x1d0/0x490
[ 3147.319805]  worker_thread+0x158/0x3d0
[ 3147.324240]  kthread+0x108/0x13c
[ 3147.328154]  ret_from_fork+0x10/0x18

In externel_lb process, the hns3 driver call napi_disable()
first, then the reset happen, then the restore process of the
externel_lb will fail, and will not call napi_enable(). When
doing externel_lb again, napi_disable() will be double call,
cause a deadlock of rtnl_lock().

This patch use the HNS3_NIC_STATE_DOWN state to protect the
calling of napi_disable() and napi_enable() in externel_lb
process, just as the usage in ndo_stop() and ndo_start().

Fixes: 04b6ba14 ("net: hns3: add support for external loopback test")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In some configure flow of hns3 driver, for example, change mtu, it will
disable MAC through firmware before configuration. But firmware disables
MAC asynchronously. The rx traffic may be not stopped in this case.

So fixes it by waiting until mac link is down.

Fixes: a9775bb6 ("net: hns3: fix set and get link ksettings issue")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-4-shaojijie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some nic configurations could only be performed after link is down. So this
patch refactor this API for reuse.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-3-shaojijie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Restore the mac pause state to user configuration when autoneg is disabled
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-2-shaojijie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change the new (unreleased) SO_PEERPIDFD sockopt to return ENODATA
rather than ESRCH if a socket type does not support remote peer-PID
queries.

Currently, SO_PEERPIDFD returns ESRCH when the socket in question is
not an AF_UNIX socket. This is quite unexpected, given that one would
assume ESRCH means the peer process already exited and thus cannot be
found. However, in that case the sockopt actually returns EINVAL (via
pidfd_prepare()). This is rather inconsistent with other syscalls, which
usually return ESRCH if a given PID refers to a non-existant process.

This changes SO_PEERPIDFD to return ENODATA instead. This is also what
SO_PEERGROUPS returns, and thus keeps a consistent behavior across
sockopts.

Note that this code is returned in 2 cases: First, if the socket type is
not AF_UNIX, and secondly if the socket was not yet connected. In both
cases ENODATA seems suitable.
Signed-off-by: David Rheinsberg <david@readahead.eu>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Fixes: 7b26952a ("net: core: add getsockopt SO_PEERPIDFD")
Link: https://lore.kernel.org/r/20230807081225.816199-1-david@readahead.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update MAINTAINERS entries with a valid email address as the Microchip
one is no longer valid.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230804050007.235799-1-claudiu.beznea@tuxon.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix handling IPv4 routes referencing a nexthop via its id by replacing
calls to fib_info_nh() with fib_info_nhc().

Trying to add an IPv4 route referencing a nextop via nhid:

    $ ip link set up swp5
    $ ip a a 10.0.0.1/24 dev swp5
    $ ip nexthop add dev swp5 id 20 via 10.0.0.2
    $ ip route add 10.0.1.0/24 nhid 20

triggers warnings when trying to handle the route:

[  528.805763] ------------[ cut here ]------------
[  528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[  528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G           O       6.4.5 #1
[  528.845178] Hardware name: delta,tn48m-dn (DT)
[  528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[  528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera]
[  528.876007] sp : ffff80000b20bc90
[  528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48
[  528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[  528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200
[  528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059
[  528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[  528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[  528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020
[  528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86
[  528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc
[  528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[  528.951058] Call trace:
[  528.953516]  __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.958952]  __prestera_router_fib_event_work+0x100/0x158 [prestera]
[  528.965348]  process_one_work+0x208/0x488
[  528.969387]  worker_thread+0x4c/0x430
[  528.973068]  kthread+0x120/0x138
[  528.976313]  ret_from_fork+0x10/0x20
[  528.979909] ---[ end trace 0000000000000000 ]---
[  528.984998] ------------[ cut here ]------------
[  528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[  529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G        W  O       6.4.5 #1
[  529.024368] Hardware name: delta,tn48m-dn (DT)
[  529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[  529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera]
[  529.055452] sp : ffff80000b20bc60
[  529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48
[  529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[  529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0
[  529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059
[  529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[  529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[  529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80
[  529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 0000000000000018
[  529.116157] x5 : 00000000d3497eb6 x4 : ffff000105604081 x3 : 000000008e979557
[  529.123329] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[  529.130501] Call trace:
[  529.132958]  __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  529.138394]  prestera_k_arb_fib_evt+0x6b8/0xd50 [prestera]
[  529.143918]  __prestera_router_fib_event_work+0x100/0x158 [prestera]
[  529.150313]  process_one_work+0x208/0x488
[  529.154348]  worker_thread+0x4c/0x430
[  529.158030]  kthread+0x120/0x138
[  529.161274]  ret_from_fork+0x10/0x20
[  529.164867] ---[ end trace 0000000000000000 ]---

and results in a non offloaded route:

    $ ip route
    10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
    10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 rt_trap

When creating a route referencing a nexthop via its ID, the nexthop will
be stored in a separate nh pointer instead of the array of nexthops in
the fib_info struct. This causes issues since fib_info_nh() only handles
the nexthops array, but not the separate nh pointer, and will loudly
WARN about it.

In contrast fib_info_nhc() handles both, but returns a fib_nh_common
pointer instead of a fib_nh pointer. Luckily we only ever access fields
from the fib_nh_common parts, so we can just replace all instances of
fib_info_nh() with fib_info_nhc() and access the fields via their
fib_nh_common names.

This allows handling IPv4 routes with an external nexthop, and they now
get offloaded as expected:

    $ ip route
    10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
    10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 offload rt_offload

Fixes: 396b80cb ("net: marvell: prestera: Add neighbour cache accounting")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20230804101220.247515-1-jonas.gorski@bisdn.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Syzkaller reported the following issue:
=======================================
Too BIG xdp->frame_sz = 131072
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
  ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline]
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
  bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103
...
Call Trace:
 <TASK>
 bpf_prog_4add87e5301a4105+0x1a/0x1c
 __bpf_prog_run include/linux/filter.h:600 [inline]
 bpf_prog_run_xdp include/linux/filter.h:775 [inline]
 bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721
 netif_receive_generic_xdp net/core/dev.c:4807 [inline]
 do_xdp_generic+0x35c/0x770 net/core/dev.c:4866
 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919
 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043
 call_write_iter include/linux/fs.h:1871 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x650/0xe40 fs/read_write.c:584
 ksys_write+0x12f/0x250 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2b
("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper
Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the
xdp_init_buff() which all XDP driver use - it's safe to remove this
check. The original intend was to catch cases where XDP drivers have
not been updated to use xdp.frame_sz, but that is not longer a concern
(since xdp_init_buff).

Running the initial syzkaller repro it was discovered that the
contiguous physical memory allocation is used for both xdp paths in
tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also
stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can
work on higher order pages, as long as this is contiguous physical
memory (e.g. a page).

Reported-and-tested-by: syzbot+f817490f5bd20541b90a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000774b9205f1d8a80d@google.com/T/
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Link: https://lore.kernel.org/all/20230725155403.796-1-andrew.kanner@gmail.com/T/
Fixes: 43b5169d ("net, xdp: Introduce xdp_init_buff utility routine")
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230803190316.2380231-1-andrew.kanner@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Using the syzkaller repro with reduced packet size it was discovered
that XDP_PACKET_HEADROOM is not checked in tun_can_build_skb(),
although pad may be incremented in tun_build_skb(). This may end up
with exceeding the PAGE_SIZE limit in tun_build_skb().

Jason Wang <jasowang@redhat.com> proposed to count XDP_PACKET_HEADROOM
always (e.g. without rcu_access_pointer(tun->xdp_prog)) in
tun_can_build_skb() since there's a window during which XDP program
might be attached between tun_can_build_skb() and tun_build_skb().

Fixes: 7df13219 ("tun: reserve extra headroom only when XDP is set")
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90aSigned-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Link: https://lore.kernel.org/r/20230803185947.2379988-1-andrew.kanner@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jason A. Donenfeld says:

====================
wireguard fixes for 6.5-rc6

Just one patch this time, somewhat late in the cycle:

1) Fix an off-by-one calculation for the maximum node depth size in the
   allowedips trie data structure, and also adjust the self-tests to hit
   this case so it doesn't regress again in the future.
====================

Link: https://lore.kernel.org/r/20230807132146.2191597-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the allowedips self-test, nodes are inserted into the tree, but it
generated an even amount of nodes, but for checking maximum node depth,
there is of course the root node, which makes the total number
necessarily odd. With two few nodes added, it never triggered the
maximum depth check like it should have. So, add 129 nodes instead of
128 nodes, and do so with a more straightforward scheme, starting with
all the bits set, and shifting over one each time. Then increase the
maximum depth to 129, and choose a better name for that variable to
make it clear that it represents depth as opposed to bits.

Cc: stable@vger.kernel.org
Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:

  # ip netns add ns1
  # ip netns exec ns1 ip link add bond0 type bond mode 0
  # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
  # ip netns exec ns1 ip link set bond_slave_1 master bond0
  # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link set bond_slave_1 nomaster
  # ip netns del ns1

The logical analysis of the problem is as follows:

1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
  vlan_vid_add()
    vlan_info_alloc()
    __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1

2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
  vlan_vid_add()
    __vlan_vid_add()
      vlan_add_rx_filter_info()
          if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
              return 0;

          if (netif_device_present(dev))
              return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
              // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.

3. detach bond_slave_1 from bond0:
__bond_release_one()
  vlan_vids_del_by_dev()
    list_for_each_entry(vid_info, &vlan_info->vid_list, list)
        vlan_vid_del(dev, vid_info->proto, vid_info->vid);
        // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
        // bond_slave_1->vlan_info will be assigned NULL.

4. delete vlan10 during delete ns1:
default_device_exit_batch()
  dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
    vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
	BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!

Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.

Fixes: 8ad227ff ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing capability check for each of the vnic counters exposed by
devlink health reporter, and thus avoid unexpected behavior due to
invalid access to registers.

While at it, read only the exact number of bits for each counter whether
it was 32 bits or 64 bits.

Fixes: b0bc615d ("net/mlx5: Add vnic devlink health reporter to PFs/VFs")
Fixes: a33682e4 ("net/mlx5e: Expose catastrophic steering error counters")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Handling pci errors should fully teardown and load back auxiliary
devices, same as done through mlx5 health recovery flow.

Fixes: 72ed5d56 ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When device is in error state, marked by the flag
MLX5_DEVICE_STATE_INTERNAL_ERROR, the HW and PCI may not be accessible
and so clock update work should be skipped. Furthermore, such access
through PCI in error state, after calling mlx5_pci_disable_device() can
result in failing to recover from pci errors.

Fixes: ef9814de ("net/mlx5e: Add HW timestamping (TS) support")
Reported-and-tested-by: Ganesh G R <ganeshgr@linux.ibm.com>
Closes: https://lore.kernel.org/netdev/9bdb9b9d-140a-7a28-f0de-2e64e873c068@nvidia.comSigned-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Cited patch introduced buckets in hash mode, but missed to update
the ports/bucket check when modifying LAG.
Fix the check.

Fixes: 352899f3 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

If having the following tc rule on stack device:

filter parent ffff: protocol ip pref 3 flower chain 1
filter parent ffff: protocol ip pref 3 flower chain 1 handle 0x1
  dst_mac 24:25:d0:e1:00:00
  src_mac 02:25:d0:25:01:02
  eth_type ipv4
  ct_state +trk+new
  in_hw in_hw_count 1
        action order 1: ct commit zone 0 pipe
         index 2 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
        Action statistics:
        Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
        backlog 0b 0p requeues 0
        used_hw_stats delayed

        action order 2: tunnel_key  set
        src_ip 192.168.1.25
        dst_ip 192.168.1.26
        key_id 4
        dst_port 4789
        csum pipe
         index 3 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
        Action statistics:
        Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
        backlog 0b 0p requeues 0
        used_hw_stats delayed

        action order 3: mirred (Egress Redirect to device vxlan1) stolen
        index 9 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
        Action statistics:
        Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
        backlog 0b 0p requeues 0
        used_hw_stats delayed

When handling FIB events, the rule in post act will not be deleted.
And because the post act rule has packet reformat and modify header
actions, also will hit the following syndromes:

mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444), err(-22)
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_PACKET_REFORMAT_CONTEXT(0x93e) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x179e84), err(-22)

Fix it by unoffloading post act rule when handling FIB events.

Fixes: 314e1105 ("net/mlx5e: Add post act offload/unoffload API")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The controller number for ECVFs is always 0, because the ECPF must be
the eswitch owner for EC VFs to be enabled.

Fixes: dc131808 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When querying eswitch functions 0 is a valid number of host VFs. After
introducing ARM SRIOV falling through to getting the max value from PCI
results in using the total VFs allowed on the ARM for the host.

Fixes: 86eec50b ("net/mlx5: Support querying max VFs from device");
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The ECVF function ID range is 1..max_ec_vfs. Currently
mlx5_vport_to_func_id returns 0..max_ec_vfs - 1. Which
results in a syndrome when querying the caps with more
recent firmware, or reading incorrect caps with older
firmware that supports EC VFs.

Fixes: 9ac0b128 ("net/mlx5: Update vport caps query/set for EC VFs")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fixing wrong calculation of the modify hdr pattern size,
where the previously calculated number would not be enough
to accommodate the required number of actions.

Fixes: da5d0027 ("net/mlx5: DR, Add cache for modify header pattern")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The flow rule can be splited, and the extra post_act rules are added
to post_act table. It's possible to trigger memleak when the rule
forwards packets from internal port and over tunnel, in the case that,
for example, CT 'new' state offload is allowed. As int_port object is
assigned to the flow attribute of post_act rule, and its refcnt is
incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is
not called, the refcnt is never decremented, then int_port is never
freed.

The kmemleak reports the following error:
unreferenced object 0xffff888128204b80 (size 64):
  comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s)
  hex dump (first 32 bytes):
    01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00  ................
    98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff  .wgA.....wgA....
  backtrace:
    [<00000000e992680d>] kmalloc_trace+0x27/0x120
    [<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core]
    [<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core]
    [<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core]
    [<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core]
    [<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core]
    [<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
    [<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410
    [<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower]
    [<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower]
    [<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010
    [<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0
    [<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360
    [<0000000082dd6c8b>] netlink_unicast+0x438/0x710
    [<00000000fc568f70>] netlink_sendmsg+0x794/0xc50
    [<0000000016e92590>] sock_sendmsg+0xc5/0x190

So fix this by moving int_port cleanup code to the flow attribute
free helper, which is used by all the attribute free cases.

Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Hold RTNL lock when calling xdp_set_features() with a registered netdev,
as the call triggers the netdev notifiers. This could happen when
switching from uplink rep to nic profile for example.

This resolves the following call trace:

RTNL: assertion failed at net/core/dev.c (1953)
WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80
Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80
Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec
RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027
RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0
RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003
R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968
R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0
FS:  00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ? __warn+0x79/0x120
 ? call_netdevice_notifiers_info+0x7c/0x80
 ? report_bug+0x17c/0x190
 ? handle_bug+0x3c/0x60
 ? exc_invalid_op+0x14/0x70
 ? asm_exc_invalid_op+0x16/0x20
 ? call_netdevice_notifiers_info+0x7c/0x80
 ? call_netdevice_notifiers_info+0x7c/0x80
 call_netdevice_notifiers+0x2e/0x50
 mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core]
 mlx5e_nic_init+0xf1/0x1a0 [mlx5_core]
 mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core]
 mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core]
 mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core]
 mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
 mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core]
 __esw_offloads_unload_rep+0x52/0x60 [mlx5_core]
 mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core]
 esw_offloads_unload_rep+0x34/0x70 [mlx5_core]
 esw_offloads_disable+0x2b/0x90 [mlx5_core]
 mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core]
 mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core]
 ? devlink_get_from_attrs_lock+0x9e/0x110
 devlink_nl_cmd_eswitch_set_doit+0x60/0xe0
 genl_family_rcv_msg_doit.isra.0+0xc2/0x110
 genl_rcv_msg+0x17d/0x2b0
 ? devlink_get_from_attrs_lock+0x110/0x110
 ? devlink_nl_cmd_eswitch_get_doit+0x290/0x290
 ? devlink_pernet_pre_exit+0xf0/0xf0
 ? genl_family_rcv_msg_doit.isra.0+0x110/0x110
 netlink_rcv_skb+0x54/0x100
 genl_rcv+0x24/0x40
 netlink_unicast+0x1f6/0x2c0
 netlink_sendmsg+0x232/0x4a0
 sock_sendmsg+0x38/0x60
 ? _copy_from_user+0x2a/0x60
 __sys_sendto+0x110/0x160
 ? __count_memcg_events+0x48/0x90
 ? handle_mm_fault+0x161/0x260
 ? do_user_addr_fault+0x278/0x6e0
 __x64_sys_sendto+0x20/0x30
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fe141b1340a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007fff61d03de8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000afab00 RCX: 00007fe141b1340a
RDX: 0000000000000038 RSI: 0000000000afab00 RDI: 0000000000000003
RBP: 0000000000afa910 R08: 00007fe141d80200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
 </TASK>

Fixes: 4d5ab0ad ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

ionic_start_queues_reconfig returns an error code if txrx_init fails.
Handle this error code in the relevant places.

This fixes a corner case where the device could get left in a detached
state if the CMB reconfig fails and the attempt to clean up the mess
also fails. Note that calling netif_device_attach when the netdev is
already attached does not lead to unexpected behavior.

Change goto name "errout" to "err_out" to maintain consistency across
goto statements.

Fixes: 40bc471d ("ionic: add tx/rx-push support with device Component Memory Buffers")
Fixes: 6f7d6f0f ("ionic: pull reset_queues into tx_timeout handler")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.

Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 4095e0e1 ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot/KCSAN reported data-races in macsec whenever dev->stats fields
are updated.

It appears all of these updates can happen from multiple cpus.

Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS records end with a 16B tag. For TLS device offload we only
need to make space for this tag in the stream, the device will
generate and replace it with the actual calculated tag.

Long time ago the code would just re-reference the head frag
which mostly worked but was suboptimal because it prevented TCP
from combining the record into a single skb frag. I'm not sure
if it was correct as the first frag may be shorter than the tag.

The commit under fixes tried to replace that with using the page
frag and if the allocation failed rolling back the data, if record
was long enough. It achieves better fragment coalescing but is
also buggy.

We don't roll back the iterator, so unless we're at the end of
send we'll skip the data we designated as tag and start the
next record as if the rollback never happened.
There's also the possibility that the record was constructed
with MSG_MORE and the data came from a different syscall and
we already told the user space that we "got it".

Allocate a single dummy page and use it as fallback.

Found by code inspection, and proven by forcing allocation
failures.

Fixes: e7b159a4 ("net/tls: remove the record tail optimization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().

Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.

Fixes: 7c657876 ("[DCCP]: Initial implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803163021.2958262-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: more fixes for v6.5

Here is a new batch of fixes related to MPTCP for v6.5 and older.

Patches 1 and 2 fix issues with MPTCP Join selftest when manually
launched with '-i' parameter to use 'ip mptcp' tool instead of the
dedicated one (pm_nl_ctl). The issues have been there since v5.18.

Thank you Andrea for your first contributions to MPTCP code in the
upstream kernel!

Patch 3 avoids corrupting the data stream when trying to reset
connections that have fallen back to TCP. This can happen from v6.1.

Patch 4 fixes a race when doing a disconnect() and an accept() in
parallel on a listener socket. The issue only happens in rare cases if
the user is really unlucky since a fix that landed in v6.3 but
backported up to v6.1.
====================

Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-0-6671b1ab11cc@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Despite commit 0ad529d9 ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.

The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.

As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:

BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS:  00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 do_accept+0x1ae/0x260 net/socket.c:1872
 __sys_accept4+0x9b/0x110 net/socket.c:1913
 __do_sys_accept4 net/socket.c:1954 [inline]
 __se_sys_accept4 net/socket.c:1951 [inline]
 __x64_sys_accept4+0x20/0x30 net/socket.c:1951
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.

After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.

Fixes: 2a6a870e ("mptcp: stops worker on unaccepted sockets at listener close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().

That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.

Fixes: d21f8348 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp_join 'implicit EP' test currently fails when using ip mptcp:

  $ ./mptcp_join.sh -iI
  <snip>
  001 implicit EP    creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
  Error: too many addresses or duplicate one: -22.
                     ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
                     modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '

This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
  iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
  flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
  times in iproute output, and does not account for a final whitespace
  in it.

This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.

Fixes: 69c6ce7b ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp_join 'delete and re-add' test fails when using ip mptcp:

  $ ./mptcp_join.sh -iI
  <snip>
  002 delete and re-add                    before delete[ ok ]
                                           mptcp_info subflows=1         [ ok ]
  Error: argument "ADDRESS" is wrong: invalid for non-zero id address
                                           after delete[fail] got 2:2 subflows expected 1

This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:

"When used with the delete id operation, an IFADDR is only included when
the ID is 0."

This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.

Fixes: 34aa6e3b ("selftests: mptcp: add ip mptcp wrappers")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Westphal says:

====================
tunnels: fix ipv4 pmtu icmp checksum

The checksum of the generated ipv4 icmp pmtud message is
only correct if the skb that causes the icmp error generation
is linear.

Fix this and add a selftest for this.
====================

Link: https://lore.kernel.org/r/20230803152653.29535-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TCP might get stuck if a nonlinear skb exceeds the path MTU,
icmp error contains an incorrect icmp checksum in that case.

Extend the existing test for vxlan to also send at least 1MB worth of
data via TCP in addition to the existing 'large icmp packet adds
route exception'.

On my test VM this fails due to 0-size output file without
"tunnels: fix kasan splat when generating ipv4 pmtu error".
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we try to emit an icmp error in response to a nonliner skb, we get

BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
 kasan_report+0x105/0x140
 ip_compute_csum+0x134/0x220
 iptunnel_pmtud_build_icmp+0x554/0x1020
 skb_tunnel_check_pmtu+0x513/0xb80
 vxlan_xmit_one+0x139e/0x2ef0
 vxlan_xmit+0x1867/0x2760
 dev_hard_start_xmit+0x1ee/0x4f0
 br_dev_queue_push_xmit+0x4d1/0x660
 [..]

ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck.

Fixes: 4cb47a86 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-2-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Another syzbot report [1] is about tp->status lockless reads
from __packet_get_status()

[1]
BUG: KCSAN: data-race in __packet_rcv_has_room / __packet_set_status

write to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 0:
__packet_set_status+0x78/0xa0 net/packet/af_packet.c:407
tpacket_rcv+0x18bb/0x1a60 net/packet/af_packet.c:2483
deliver_skb net/core/dev.c:2173 [inline]
__netif_receive_skb_core+0x408/0x1e80 net/core/dev.c:5337
__netif_receive_skb_one_core net/core/dev.c:5491 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x57/0xa0 kernel/softirq.c:650
sysvec_apic_timer_interrupt+0x6d/0x80 arch/x86/kernel/apic/apic.c:1106
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:645
smpboot_thread_fn+0x33c/0x4a0 kernel/smpboot.c:112
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

read to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 1:
__packet_get_status net/packet/af_packet.c:436 [inline]
packet_lookup_frame net/packet/af_packet.c:524 [inline]
__tpacket_has_room net/packet/af_packet.c:1255 [inline]
__packet_rcv_has_room+0x3f9/0x450 net/packet/af_packet.c:1298
tpacket_rcv+0x275/0x1a60 net/packet/af_packet.c:2285
deliver_skb net/core/dev.c:2173 [inline]
dev_queue_xmit_nit+0x38a/0x5e0 net/core/dev.c:2243
xmit_one net/core/dev.c:3574 [inline]
dev_hard_start_xmit+0xcf/0x3f0 net/core/dev.c:3594
__dev_queue_xmit+0xefb/0x1d10 net/core/dev.c:4244
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
can_send+0x4eb/0x5d0 net/can/af_can.c:276
bcm_can_tx+0x314/0x410 net/can/bcm.c:302
bcm_tx_timeout_handler+0xdb/0x260
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x217/0x700 kernel/time/hrtimer.c:1749
hrtimer_run_softirq+0xd6/0x120 kernel/time/hrtimer.c:1766
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x0000000000000000 -> 0x0000000020000081

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 6.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023

Fixes: 69e3c75f ("net: TX_RING and packet mmap")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230803145600.2937518-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the tagging protocol in current use is "ocelot-8021q" and we unbind
the driver, we see this splat:

$ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind
mscc_felix 0000:00:00.5 swp0: left promiscuous mode
sja1105 spi2.0: Link is Down
DSA: tree 1 torn down
mscc_felix 0000:00:00.5 swp2: left promiscuous mode
sja1105 spi2.2: Link is Down
DSA: tree 3 torn down
fsl_enetc 0000:00:00.2 eno2: left promiscuous mode
mscc_felix 0000:00:00.5: Link is Down
------------[ cut here ]------------
RTNL: assertion failed at net/dsa/tag_8021q.c (409)
WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0
Modules linked in:
CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771
pc : dsa_tag_8021q_unregister+0x12c/0x1a0
lr : dsa_tag_8021q_unregister+0x12c/0x1a0
Call trace:
 dsa_tag_8021q_unregister+0x12c/0x1a0
 felix_tag_8021q_teardown+0x130/0x150
 felix_teardown+0x3c/0xd8
 dsa_tree_teardown_switches+0xbc/0xe0
 dsa_unregister_switch+0x168/0x260
 felix_pci_remove+0x30/0x60
 pci_device_remove+0x4c/0x100
 device_release_driver_internal+0x188/0x288
 device_links_unbind_consumers+0xfc/0x138
 device_release_driver_internal+0xe0/0x288
 device_driver_detach+0x24/0x38
 unbind_store+0xd8/0x108
 drv_attr_store+0x30/0x50
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
RTNL: assertion failed at net/8021q/vlan_core.c (376)
WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0
CPU: 1 PID: 329 Comm: bash Tainted: G        W          6.5.0-rc3+ #771
pc : vlan_vid_del+0x1b8/0x1f0
lr : vlan_vid_del+0x1b8/0x1f0
 dsa_tag_8021q_unregister+0x8c/0x1a0
 felix_tag_8021q_teardown+0x130/0x150
 felix_teardown+0x3c/0xd8
 dsa_tree_teardown_switches+0xbc/0xe0
 dsa_unregister_switch+0x168/0x260
 felix_pci_remove+0x30/0x60
 pci_device_remove+0x4c/0x100
 device_release_driver_internal+0x188/0x288
 device_links_unbind_consumers+0xfc/0x138
 device_release_driver_internal+0xe0/0x288
 device_driver_detach+0x24/0x38
 unbind_store+0xd8/0x108
 drv_attr_store+0x30/0x50
DSA: tree 0 torn down

This was somewhat not so easy to spot, because "ocelot-8021q" is not the
default tagging protocol, and thus, not everyone who tests the unbinding
path may have switched to it beforehand. The default
felix_tag_npi_teardown() does not require rtnl_lock() to be held.

Fixes: 7c83a7c5 ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>