- 10 Aug, 2023 40 commits
-
-
Tomi Valkeinen authored
The routing parameter of v4l2_subdev_set_routing_with_fmt() is missing 'const'. Add it. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Tomi Valkeinen authored
Now that the kernel drivers have been fixed to initialize the stream field, and we have the client capability which the userspace uses to say it has initialized the stream field, we can drop the implicit zeroing of the stream field in the various check functions. Signed-off-by:
-
Sakari Ailus authored
Split lens drivers from camera sensor into a new section. This makes it easier to maintain the list. Also add documentation related files under the camera sensor entry. Add the word "CAMERA" to the subject as well since there are many other kinds of sensors. Signed-off-by:
-
Sakari Ailus authored
Add an entry for V4L2 async and fwnode frameworks, with myself as the maintainer. Signed-off-by:
-
Sakari Ailus authored
As selecting V4L2_FWNODE, MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API are now selected by the top level menu, they can be dropped from the individual drivers. Also dropped selecting V4L2_ASYNC for a single driver as this is already implied by V4L2_FWNODE. Similarly, the I2C dependency is now also in the top level menu, so remove it, as well as VIDEO_DEV which isn't needed by camera sensor drivers. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
Select V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API for all sensor drivers. This also adds the options to drivers that don't specifically need them, these are still seldom used drivers using old APIs. The upside is that these should now all compile --- many drivers have had missing dependencies. The "menu" is replaced by selectable "menuconfig" to select the needed V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API options. Also select MEDIA_CONTROLLER which VIDEO_V4L2_SUBDEV_API effectively depends on, and add the I2C dependency to the menu. Reported-by:
-
Laurent Pinchart authored
Enumeration of the minimum, maximum and step values for the image width does not take hardware constraints into account. Fix it. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Lukas Bulwahn authored
Commit cd063027 ("media: imx: Unstage the imx8mq-mipi-csi2 driver") adds a file entry for the driver code to MEDIA DRIVERS FOR FREESCALE IMX7/8, but misses the number '2' suffix in that entry. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Correct the file entry in MEDIA DRIVERS FOR FREESCALE IMX7/8. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
-
Guoniu.zhou authored
i.MX93 uses a different gasket which has different register definitions compared with i.MX8. Hence implement the gasket callbacks in order to add ISI support for i.MX93. Signed-off-by:
Guoniu.zhou <guoniu.zhou@nxp.com> Reviewed-by:
-
Guoniu.zhou authored
The i.MX93 includes an ISI instance compatible with the imx8-isi driver, but with a different gasket. To prepare for this, make the gasket configuration modular by moving the code to an ops structure. Signed-off-by:
-
Guoniu.zhou authored
Add the compatible string support for i.MX93 ISI. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by:
-
Yang Yingliang authored
It should check 'xbar->inputs', when allocate memory for it. Cc: stable@vger.kernel.org Fixes: cf21f328 ("media: nxp: Add i.MX8 ISI driver") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
-
Laurent Pinchart authored
CONFIG_VIDEO_IMX_MEDIA isn't needed on arm64 platforms since commit 9f257f50 ("media: imx: Unstage the imx7-media-csi driver") which moved the last arm64 driver depending on that Kconfig symbol out of staging. Drop it from the arm64 defconfig. Fixes: 9f257f50 ("media: imx: Unstage the imx7-media-csi driver") Signed-off-by:
-
Laurent Pinchart authored
The VIDEO_IMX_MEDIA Kconfig symbol used to select helpers shared between independent drivers for different i.MX SoCs, and VIDEO_IMX_MEDIA then selects drivers specific to the i.MX5 and i.MX6. Now that i.MX7 and i.MX8 support has moved to drivers/media/ and doesn't depend on VIDEO_IMX_CSI, there's no need to have separate Kconfig options. Merge VIDEO_IMX_CSI into VIDEO_IMX_MEDIA. Signed-off-by:
-
Tomi Valkeinen authored
FPD-Link has an operating mode that used to be called "asynchronous" in the hardware documentation, but that has been changed to non-synchronous already quite a while back. The ub960 driver still had one instance of the old naming, so let's rename it. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Tomi Valkeinen authored
Add support for FPD-Link non-sync mode with external clock. The only thing that needs to be added is the calculation for the clkout. Signed-off-by:
-
Tomi Valkeinen authored
Separate clkout calculations and register writes into two functions: ub953_calc_clkout_params and ub953_write_clkout_regs, and add a struct ub953_clkout_data that is used to store the clkout parameters. This simplifies the clkout management. Signed-off-by:
-
Tomi Valkeinen authored
Allow using FPD-Link in async mode. The driver handles it correctly, but the mode was blocked at probe time as there wasn't HW to test this with. Now the mode has been tested, and it works. Signed-off-by:
-
Tomi Valkeinen authored
Handle V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK flag to configure the CSI-2 RX continuous/non-continuous clock register. Signed-off-by:
-
Tomi Valkeinen authored
Use v4l2_fwnode_endpoint_parse() to parse the sink endpoint parameters. Signed-off-by:
-
Tomi Valkeinen authored
Use v4l2_fwnode_endpoint_parse() to parse the sink endpoint parameters. Signed-off-by:
-
Tomi Valkeinen authored
Use 'clock-noncontinuous' from DT to configure the continuous/non-continuous clock setting for the TX ports. Signed-off-by:
-
Tomi Valkeinen authored
Commit 1029939b ("media: v4l: async: Simplify async sub-device fwnode matching") recently changed how async sub-device matching works. This breaks the UB9x3 drivers, as they set the subdev.fwnode to an endpoint. Afaiu, the fix is simply to not set subdev.fwnode at all. Fixes: 1029939b ("media: v4l: async: Simplify async sub-device fwnode matching") Signed-off-by:
-
Hans Verkuil authored
This resolves this smatch error: drivers/media/firewire/firedtv-avc.c:602 avc_tuner_dsd() error: uninitialized symbol 'pos'. Signed-off-by: -
Hans Verkuil authored
This resolves a new smatch warning; drivers/media/usb/pvrusb2/pvrusb2-hdw.c:3293 pvr2_hdw_get_tuner_status() warn: inconsistent indenting Signed-off-by: -
Ruan Jinjie authored
There is no possible for platform_get_irq() to return 0, and the return value of platform_get_irq() is more sensible to show the error reason. Signed-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by:
-
Mariusz Bialonczyk authored
This commit is fixing the module in a way that trailing spaces at the end of the line in the debug/dmesg are gone. Signed-off-by:
Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by:
-
Ruan Jinjie authored
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by:
-
Ruan Jinjie authored
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Ruan Jinjie authored
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by:
Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Signed-off-by:
-
Peng Fan authored
The node name should use hyphen(-), not underscore(_). Signed-off-by:
Peng Fan <peng.fan@nxp.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Example DTS should not have 'status' property. Signed-off-by:
Benjamin Mugnier <benjamin.mugnier@foss.st.com> Acked-by:
-
Yuanjun Gong authored
return an error code if mb86a16_read() gets an unexpected return value. Signed-off-by:
Yuanjun Gong <ruc_gongyuanjun@163.com> Signed-off-by:
-
Paul Kocialkowski authored
The doc mistakently mentions v4l2_frmsizeenum as the struct type passed to VIDIOC_ENUM_FRAMEINTERVALS, while it's actually v4l2_frmivalenum that should be used. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Alain Volmat authored
Avoid calling s_stream on each subdev until reaching the sensor and instead call s_stream on the source subdev only (which will in turn do whatever needed to start the stream). Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Reviewed-by:
Hugues FRUCHET <hugues.fruchet@foss.st.com> Signed-off-by:
-
Alain Volmat authored
Cascade the s_stream call to the source subdev whenever the bridge streaming is enable / disabled. Signed-off-by:
-
Paul Kocialkowski authored
The parts about fields that are returned typically comes after "Required fields" so it feels more consistent to name them "Returned fields". Signed-off-by:
-
Paul Kocialkowski authored
An extra whitespace after the asterisks prevents bold syntax parsing and results in the asterisks shown in the (non-bold) title. Signed-off-by:
-
Patrick Whewell authored
The firmware path for the sm8250 resources is incorrect. This fixes the path to address the firmware correctly. Signed-off-by:
Patrick Whewell <patrick.whewell@sightlineapplications.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
-
Stephan Gerhold authored
Reserved memory can be either looked up using the generic function of_address_to_resource() or using the special of_reserved_mem_lookup(). The latter has the advantage that it ensures that the referenced memory region was really reserved and is not e.g. status = "disabled". of_reserved_mem also supports allocating reserved memory dynamically at boot time. This works only when using of_reserved_mem_lookup() since there won't be a fixed address in the device tree. Switch the code to use of_reserved_mem_lookup(). There is no functional difference for static reserved memory allocations. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
