- 28 Dec, 2020 16 commits
-
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: fix some new build warnings I got a super friendly message from the Intel kernel test robot that pointed out that two patches I posted last week caused new build warnings. I already had these problems fixed in my own tree but the fix was not included in what I sent out last week. ==================== Link: https://lore.kernel.org/r/20201226213737.338928-1-elder@linaro.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
Callers of evt_ring_command() no longer care whether the command times out, and don't use what evt_ring_command() returns. Redefine that function to have void return type. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 428b448e ("net: ipa: use state to determine event ring command success") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Callers of gsi_channel_command() no longer care whether the command times out, and don't use what gsi_channel_command() returns. Redefine that function to have void return type. Reported-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes. The first patch fixes recovery of fatal AER errors. The second one fixes a potential array out of bounds issue. ==================== Link: https://lore.kernel.org/r/1609096698-15009-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
-
Michael Chan authored
TQM rings are hardware resources that require host context memory managed by the driver. The driver supports up to 9 TQM rings and the number of rings to use is requested by firmware during run-time. Cap this number to the maximum supported to prevent accessing beyond the array. Future firmware may request more than 9 TQM rings. Define macros to remove the magic number 9 from the C code. Fixes: ac3158cb ("bnxt_en: Allocate TQM ring context memory according to fw specification.") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
A recent change skips sending firmware messages to the firmware when pci_channel_offline() is true during fatal AER error. To make this complete, we need to move the re-initialization sequence to bnxt_io_resume(), otherwise the firmware messages to re-initialize will all be skipped. In any case, it is more correct to re-initialize in bnxt_io_resume(). Also, fix the reverse x-mas tree format when defining variables in bnxt_io_slot_reset(). Fixes: b340dc68 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-23 Commit e086ba2f ("e1000e: disable s0ix entry and exit flows for ME systems") disabled S0ix flows for systems that have various incarnations of the i219-LM ethernet controller. This was done because of some regressions caused by an earlier commit 632fbd5e ("e1000e: fix S0ix flows for cable connected case") with i219-LM controller. Per discussion with Intel architecture team this direction should be changed and allow S0ix flows to be used by default. This patch series includes directional changes for their conclusions in https://lkml.org/lkml/2020/12/13/15. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Export S0ix flags to ethtool Revert "e1000e: disable s0ix entry and exit flows for ME systems" e1000e: bump up timeout to wait when ME un-configures ULP mode e1000e: Only run S0ix flows if shutdown succeeded ==================== Link: https://lore.kernel.org/r/20201223233625.92519-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Davide Caratti authored
the following syzkaller reproducer: r0 = socket$inet_mptcp(0x2, 0x1, 0x106) bind$inet(r0, &(0x7f0000000080)={0x2, 0x4e24, @multicast2}, 0x10) connect$inet(r0, &(0x7f0000000480)={0x2, 0x4e24, @local}, 0x10) sendto$inet(r0, &(0x7f0000000100)="f6", 0xffffffe7, 0xc000, 0x0, 0x0) systematically triggers the following warning: WARNING: CPU: 2 PID: 8618 at net/core/stream.c:208 sk_stream_kill_queues+0x3fa/0x580 Modules linked in: CPU: 2 PID: 8618 Comm: syz-executor Not tainted 5.10.0+ #334 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/04 RIP: 0010:sk_stream_kill_queues+0x3fa/0x580 Code: df 48 c1 ea 03 0f b6 04 02 84 c0 74 04 3c 03 7e 40 8b ab 20 02 00 00 e9 64 ff ff ff e8 df f0 81 2 RSP: 0018:ffffc9000290fcb0 EFLAGS: 00010293 RAX: ffff888011cb8000 RBX: 0000000000000000 RCX: ffffffff86eecf0e RDX: 0000000000000000 RSI: ffffffff86eecf6a RDI: 0000000000000005 RBP: 0000000000000e28 R08: ffff888011cb8000 R09: fffffbfff1f48139 R10: ffffffff8fa409c7 R11: fffffbfff1f48138 R12: ffff8880215e6220 R13: ffffffff8fa409c0 R14: ffffc9000290fd30 R15: 1ffff92000521fa2 FS: 00007f41c78f4800(0000) GS:ffff88802d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95c803d088 CR3: 0000000025ed2000 CR4: 00000000000006f0 Call Trace: __mptcp_destroy_sock+0x4f5/0x8e0 mptcp_close+0x5e2/0x7f0 inet_release+0x12b/0x270 __sock_release+0xc8/0x270 sock_close+0x18/0x20 __fput+0x272/0x8e0 task_work_run+0xe0/0x1a0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x19/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 userspace programs provide arbitrarily high values of 'len' in sendmsg(): this is causing integer overflow of 'amount'. Cap forward allocation to 1 megabyte: higher values are not really useful. Suggested-by:Paolo Abeni <pabeni@redhat.com> Fixes: e93da928 ("mptcp: implement wmem reservation") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/3334d00d8b2faecafdfab9aa593efcbf61442756.1608584474.git.dcaratti@redhat.comSigned-off-by:
-
Yunjian Wang authored
Currently the tun_napi_alloc_frags() function returns -ENOMEM when the number of iovs exceeds MAX_SKB_FRAGS + 1. However this is inappropriate, we should use -EMSGSIZE instead of -ENOMEM. The following distinctions are matters: 1. the caller need to drop the bad packet when -EMSGSIZE is returned, which means meeting a persistent failure. 2. the caller can try again when -ENOMEM is returned, which means meeting a transient failure. Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Acked-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/1608864736-24332-1-git-send-email-wangyunjian@huawei.comSigned-off-by:
-
Grygorii Strashko authored
The CPTS driver registers PTP PHC clock when first netif is going up and unregister it when all netif are down. Now ethtool will show: - PTP PHC clock index 0 after boot until first netif is up; - the last assigned PTP PHC clock index even if PTP PHC clock is not registered any more after all netifs are down. This patch ensures that -1 is returned by ethtool when PTP PHC clock is not registered any more. Fixes: 8a2c9a5a ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201224162405.28032-1-grygorii.strashko@ti.comSigned-off-by:
-
Jakub Kicinski authored
Antoine Tenart says: ==================== net-sysfs: fix race conditions in the xps code This series fixes race conditions in the xps code, where out of bound accesses can occur when dev->num_tc is updated, triggering oops. The root cause is linked to locking issues. An explanation is given in each of the commit logs. We had a discussion on the v1 of this series about using the xps_map mutex instead of the rtnl lock. While that seemed a better compromise, v2 showed the added complexity wasn't best for fixes. So we decided to go back to v1 and use the rtnl lock. Because of this, the only differences between v1 and v3 are improvements in the commit messages. ==================== Link: https://lore.kernel.org/r/20201223212323.3603139-1-atenart@kernel.orgSigned-off-by:
-
Antoine Tenart authored
Accesses to dev->xps_rxqs_map (when using dev->num_tc) should be protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't see an actual bug being triggered, but let's be safe here and take the rtnl lock while accessing the map in sysfs. Fixes: 8af2c06f ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by:
Antoine Tenart <atenart@kernel.org> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Signed-off-by:
-
Antoine Tenart authored
Two race conditions can be triggered when storing xps rxqs, resulting in various oops and invalid memory accesses: 1. Calling netdev_set_num_tc while netif_set_xps_queue: - netif_set_xps_queue uses dev->tc_num as one of the parameters to compute the size of new_dev_maps when allocating it. dev->tc_num is also used to access the map, and the compiler may generate code to retrieve this field multiple times in the function. - netdev_set_num_tc sets dev->tc_num. If new_dev_maps is allocated using dev->tc_num and then dev->tc_num is set to a higher value through netdev_set_num_tc, later accesses to new_dev_maps in netif_set_xps_queue could lead to accessing memory outside of new_dev_maps; triggering an oops. 2. Calling netif_set_xps_queue while netdev_set_num_tc is running: 2.1. netdev_set_num_tc starts by resetting the xps queues, dev->tc_num isn't updated yet. 2.2. netif_set_xps_queue is called, setting up the map with the *old* dev->num_tc. 2.3. netdev_set_num_tc updates dev->tc_num. 2.4. Later accesses to the map lead to out of bound accesses and oops. A similar issue can be found with netdev_reset_tc. One way of triggering this is to set an iface up (for which the driver uses netdev_set_num_tc in the open path, such as bnx2x) and writing to xps_rxqs in a concurrent thread. With the right timing an oops is triggered. Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc and netdev_reset_tc should be mutually exclusive. We do that by taking the rtnl lock in xps_rxqs_store. Fixes: 8af2c06f ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by: -
Antoine Tenart authored
Accesses to dev->xps_cpus_map (when using dev->num_tc) should be protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't see an actual bug being triggered, but let's be safe here and take the rtnl lock while accessing the map in sysfs. Fixes: 184c449f ("net: Add support for XPS with QoS via traffic classes") Signed-off-by:
-
Antoine Tenart authored
Two race conditions can be triggered when storing xps cpus, resulting in various oops and invalid memory accesses: 1. Calling netdev_set_num_tc while netif_set_xps_queue: - netif_set_xps_queue uses dev->tc_num as one of the parameters to compute the size of new_dev_maps when allocating it. dev->tc_num is also used to access the map, and the compiler may generate code to retrieve this field multiple times in the function. - netdev_set_num_tc sets dev->tc_num. If new_dev_maps is allocated using dev->tc_num and then dev->tc_num is set to a higher value through netdev_set_num_tc, later accesses to new_dev_maps in netif_set_xps_queue could lead to accessing memory outside of new_dev_maps; triggering an oops. 2. Calling netif_set_xps_queue while netdev_set_num_tc is running: 2.1. netdev_set_num_tc starts by resetting the xps queues, dev->tc_num isn't updated yet. 2.2. netif_set_xps_queue is called, setting up the map with the *old* dev->num_tc. 2.3. netdev_set_num_tc updates dev->tc_num. 2.4. Later accesses to the map lead to out of bound accesses and oops. A similar issue can be found with netdev_reset_tc. One way of triggering this is to set an iface up (for which the driver uses netdev_set_num_tc in the open path, such as bnx2x) and writing to xps_cpus in a concurrent thread. With the right timing an oops is triggered. Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc and netdev_reset_tc should be mutually exclusive. We do that by taking the rtnl lock in xps_cpus_store. Fixes: 184c449f ("net: Add support for XPS with QoS via traffic classes") Signed-off-by: -
Roland Dreier authored
The cdc_ncm driver passes network connection notifications up to usbnet_link_change(), which is the right place for any logging. Remove the netdev_info() duplicating this from the driver itself. This stops devices such as my "TRENDnet USB 10/100/1G/2.5G LAN" (ID 20f4:e02b) adapter from spamming the kernel log with cdc_ncm 2-2:2.0 enp0s2u2c2: network connection: connected messages every 60 msec or so. Signed-off-by:Roland Dreier <roland@kernel.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20201224032116.2453938-1-roland@kernel.orgSigned-off-by:
-
- 23 Dec, 2020 22 commits
-
-
Mario Limonciello authored
This flag can be used by an end user to disable S0ix flows on a buggy system or by an OEM for development purposes. If you need this flag to be persisted across reboots, it's suggested to use a udev rule to call adjust it until the kernel could have your configuration in a disallow list. Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Tested-by:
Yijun Shen <Yijun.shen@dell.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Mario Limonciello authored
commit e086ba2f ("e1000e: disable s0ix entry and exit flows for ME systems") disabled s0ix flows for systems that have various incarnations of the i219-LM ethernet controller. This changed caused power consumption regressions on the following shipping Dell Comet Lake based laptops: * Latitude 5310 * Latitude 5410 * Latitude 5410 * Latitude 5510 * Precision 3550 * Latitude 5411 * Latitude 5511 * Precision 3551 * Precision 7550 * Precision 7750 This commit was introduced because of some regressions on certain Thinkpad laptops. This comment was potentially caused by an earlier commit 632fbd5e ("e1000e: fix S0ix flows for cable connected case"). or it was possibly caused by a system not meeting platform architectural requirements for low power consumption. Other changes made in the driver with extended timeouts are expected to make the driver more impervious to platform firmware behavior. Fixes: e086ba2f ("e1000e: disable s0ix entry and exit flows for ME systems") Reviewed-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
-
Mario Limonciello authored
Per guidance from Intel ethernet architecture team, it may take up to 1 second for unconfiguring ULP mode. However in practice this seems to be taking up to 2 seconds on some Lenovo machines. Detect scenarios that take more than 1 second but less than 2.5 seconds and emit a warning on resume for those scenarios. Suggested-by:
Aaron Ma <aaron.ma@canonical.com> Suggested-by:
Sasha Netfin <sasha.neftin@intel.com> Suggested-by:
-
Mario Limonciello authored
If the shutdown failed, the part will be thawed and running S0ix flows will put it into an undefined state. Reported-by:
-
Lijun Pan authored
Commit f9c6cea0 ("ibmvnic: Skip fatal error reset after passive init") says "If the passive CRQ initialization occurs before the FATAL reset task is processed, the FATAL error reset task would try to access a CRQ message queue that was freed, causing an oops. The problem may be most likely to occur during DLPAR add vNIC with a non-default MTU, because the DLPAR process will automatically issue a change MTU request. Fix this by not processing fatal error reset if CRQ is passively initialized after client-driven CRQ initialization fails." The original commit skips a specific reset condition, but that does not fix the problem it claims to fix, and misses a reset condition. The effective fix is commit 0e435bef ("ibmvnic: fix NULL pointer dereference in ibmvic_reset_crq") and commit a0faaa27 ("ibmvnic: fix NULL pointer dereference in reset_sub_crq_queues"). With above two fixes, there are no more crashes seen as described even without the original commit, so I would like to revert the original commit. Fixes: f9c6cea0 ("ibmvnic: Skip fatal error reset after passive init") Signed-off-by:
Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201223204904.12677-1-ljp@linux.ibm.comSigned-off-by:
-
Dinghao Liu authored
When mdiobus_register() fails, priv->mdio allocated by mdiobus_alloc() has not been freed, which leads to memleak. Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201223110615.31389-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
John Wang authored
When aggregating ncsi interfaces and dedicated interfaces to bond interfaces, the ncsi response handler will use the wrong net device to find ncsi_dev, so that the ncsi interface will not work properly. Here, we use the original net device to fix it. Fixes: 138635cc ("net/ncsi: NCSI response packet handler") Signed-off-by:
John Wang <wangzhiqiang.bj@bytedance.com> Link: https://lore.kernel.org/r/20201223055523.2069-1-wangzhiqiang.bj@bytedance.comSigned-off-by:
-
Petr Machata authored
DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have the CAP_NET_ADMIN capability. However, the operation to be performed is not decided from the DCB message type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for reading DCB objects, the corresponding SET and DEL commands are used for manipulation. The assumption is that set-like commands will be sent via an RTM_SETDCB message, and get-like ones via RTM_GETDCB. However, this assumption is not enforced. It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN capability by sending the corresponding command in an RTM_GETDCB message. That is a bug. Fix it by validating the type of the request message against the type used for the response. Fixes: 2f90b865 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Signed-off-by:
Petr Machata <me@pmachata.org> Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.orgSigned-off-by:
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: GSI interrupt handling fixes This series implements fixes for some issues related to handling interrupts when GSI channel and event ring commands complete. The first issue is that the completion condition for an event ring or channel command could occur while the associated interrupt is disabled. This would cause the interrupt to fire when it is subsequently enabled, even if the condition it signals had already been handled. The fix is to clear any pending interrupt conditions before re-enabling the interrupt. The second and third patches change how the success of an event ring or channel command is determined. These commands change the state of an event ring or channel. Previously the receipt of a completion interrupt was required to consider a command successful. Instead, a command is successful if it changes the state of the target event ring or channel in the way expected. This way the command can succeed even if the completion interrupt did not arrive while it was enabled. ==================== Link: https://lore.kernel.org/r/20201222180012.22489-1-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
This patch implements the same basic fix for event rings as the previous one does for channels. The result of issuing an event ring control command should be that the event ring changes state. If enabled, a completion interrupt signals that the event ring state has changed. This interrupt is enabled by gsi_evt_ring_command() and disabled again after the command has completed (or we time out). There is a window of time during which the command could complete successfully without interrupting. This would cause the event ring to transition to the desired new state. So whether a event ring command ends via completion interrupt or timeout, we can consider the command successful if the event ring has entered the desired state (and a failure if it has not, regardless of the cause). Fixes: b4175f87 ("net: ipa: only enable GSI event control IRQs when needed") Signed-off-by:
-
Alex Elder authored
The result of issuing a channel control command should be that the channel changes state. If enabled, a completion interrupt signals that the channel state has changed. This interrupt is enabled by gsi_channel_command() and disabled again after the command has completed (or we time out). There is a window of time--after the completion interrupt is disabled but before the channel state is read--during which the command could complete successfully without interrupting. This would cause the channel to transition to the desired new state. So whether a channel command ends via completion interrupt or timeout, we can consider the command successful if the channel has entered the desired state (and a failure if it has not, regardless of the cause). Fixes: d6c9e3f5 ("net: ipa: only enable generic command completion IRQ when needed"); Signed-off-by:
-
Alex Elder authored
We enable the completion interrupt for channel or event ring commands only when we issue them. The interrupt is disabled after the interrupt has fired, or after we have timed out waiting for it. If we time out, the command could complete after the interrupt has been disabled, causing a state change in the channel or event ring. The interrupt associated with that state change would be delivered the next time the completion interrupt is enabled. To avoid previous command completions interfering with new commands, clear all pending completion interrupts before re-enabling them for a new command. Fixes: b4175f87 ("net: ipa: only enable GSI event control IRQs when needed") Signed-off-by:
-
Noor Azura Ahmad Tarmizi authored
Add TGL-H PCI info and PCI IDs for the new TSN Controller to the list of supported devices. Signed-off-by:
Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Link: https://lore.kernel.org/r/20201222160337.30870-1-muhammad.husaini.zulkifli@intel.comSigned-off-by:
-
Alex Elder authored
When the core clock rate and interconnect bandwidth specifications were moved into configuration data, a copy/paste bug was introduced, causing the memory interconnect bandwidth to be set three times rather than enabling the three different interconnects. Fix this bug. Fixes: 91d02f95 ("net: ipa: use config data for clocking") Signed-off-by:
Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201222151613.5730-1-elder@linaro.orgSigned-off-by:
-
Jeff Dike authored
virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS and CONFIG_HOTPLUG are enabled. The path is: virtnet_set_channels - calls get_online_cpus(), which is a trivial wrapper around cpus_read_lock() netif_set_real_num_tx_queues netif_reset_xps_queues_gt netif_reset_xps_queues - calls cpus_read_lock() This call chain and potential deadlock happens when the number of TX queues is reduced. This commit the removes netif_set_real_num_[tr]x_queues calls from inside the get/put_online_cpus section, as they don't require that it be held. Fixes: 47be2479 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive") Signed-off-by:Jeff Dike <jdike@akamai.com> Acked-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 First set of fixes for v5.11, more fixes than usual this time. For ath11k we have several fixes for QCA6390 PCI support and mt76 has several. Also one build fix for mt76. mt76 * fix two NULL pointer dereference * fix build error when CONFIG_MAC80211_MESH is disabled rtlwifi * fix use-after-free in firmware handling code ath11k * error handling fixes * fix crash found during connect and disconnect test * handle HT disable better * avoid printing qmi memory failure during firmware bootup * disable ASPM during firmware bootup * tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: MAINTAINERS: switch to different email address mt76: mt7915: fix MESH ifdef block mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue mt76: sdio: remove wake logic in mt76s_process_tx_queue mt76: usb: remove wake logic in mt76u_status_worker ath11k: pci: disable ASPM L0sLs before downloading firmware ath11k: qmi: try to allocate a big block of DMA memory first rtlwifi: rise completion at the last step of firmware callback mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker ath11k: Fix ath11k_pci_fix_l1ss() ath11k: Fix error code in ath11k_core_suspend() ath11k: start vdev if a bss peer is already created ath11k: fix crash caused by NULL rx_channel ath11k: add missing null check on allocated skb ==================== Link: https://lore.kernel.org/r/20201222163727.D4336C433C6@smtp.codeaurora.orgSigned-off-by:
-
Manish Chopra authored
IPIP tunnels packets are unknown to device, hence these packets are incorrectly parsed and caused the packet corruption, so disable offlods for such packets at run time. Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.comSigned-off-by:
-
Baruch Siach authored
Join adjacent questions to a single question line. This fixes the formatting of questions that were not part of the heading. Also, drop Q: and A: prefixes. We don't need them now that questions and answers are visually separated. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/f76078ba5547744f2ec178984c32fbc7dcd29a2b.1608454187.git.baruch@tkos.co.ilSigned-off-by:
-
Dinghao Liu authored
When mvneta_port_power_up() fails, we should execute cleanup functions after label err_netdev to avoid memleak. Fixes: 41c2b6b4 ("net: ethernet: mvneta: Add back interface mode validation") Signed-off-by:
-
Lijun Pan authored
Commit 34f0f4e3 ("ibmvnic: Fix login buffer memory leaks") frees login_rsp_buffer in release_resources() and send_login() because handle_login_rsp() does not free it. Commit f3ae59c0 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp(). It seems unnecessary to free it in release_resources() and send_login(). There are chances that handle_login_rsp returns earlier without freeing buffers. Double-checking the buffer is harmless since release_login_buffer and release_login_rsp_buffer will do nothing if buffer is already freed. Fixes: f3ae59c0 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Fixes: 34f0f4e3 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by:
-
Jakub Kicinski authored
When searching for inactive maintainers it's useful to filter out mailing list addresses. Such "maintainers" will obviously never feature in a "From:" line of an email or a review tag. Since "L:" entries only provide the address of a mailing list without a fancy name extend this pattern to "M:" entries. Alternatively we could reserve M: entries for humans only and move the fake "maintainers" to L:. While I'd personally prefer to reserve M: for humans only, I'm not 100% that's a great choice either, given most L: entries are in fact open mailing lists with public archives. Link: https://lore.kernel.org/r/20201219185538.750076-1-kuba@kernel.orgSigned-off-by:
-
Martin Blumenstingl authored
The dwmac glue registers on Amlogic Meson8b and newer SoCs has two clock inputs: - Meson8b and Meson8m2: MPLL2 and MPLL2 (the same parent is wired to both inputs) - GXBB, GXL, GXM, AXG, G12A, G12B, SM1: FCLK_DIV2 and MPLL2 All known vendor kernels and u-boots are using the first input only. We let the common clock framework automatically choose the "right" parent. For some boards this causes a problem though, specificially with G12A and newer SoCs. The clock input is used for generating the 125MHz RGMII TX clock. For the two input clocks this means on G12A: - FCLK_DIV2: 999999985Hz / 8 = 124999998.125Hz - MPLL2: 499999993Hz / 4 = 124999998.25Hz In theory MPLL2 is the "better" clock input because it's gets us 0.125Hz closer to the requested frequency than FCLK_DIV2. In reality however there is a resource conflict because MPLL2 is needed to generate some of the audio clocks. dwmac-meson8b probes first and sets up the clock tree with MPLL2. This works fine until the audio driver comes and "steals" the MPLL2 clocks and configures it with it's own rate (294909637Hz). The common clock framework happily changes the MPLL2 rate but does not reconfigure our RGMII TX clock tree, which then ends up at 73727409Hz, which is more than 40% off the requested 125MHz. Don't use the second clock input for now to force the common clock framework to always select the first parent. This mimics the behavior from the vendor driver and fixes the clock resource conflict with the audio driver on G12A boards. Once the common clock framework can handle this situation this change can be reverted again. Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Reported-by:
Thomas Graichen <thomas.graichen@gmail.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by:
-
- 22 Dec, 2020 2 commits
-
-
Stefan Chulski authored
During GoP port 2 Networking Complex Control mode of operation configurations, also GoP port 3 mode of operation was wrongly set. Patch removes these configurations. Fixes: f84bf386 ("net: mvpp2: initialize the GoP") Acked-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.comSigned-off-by:
-
Guillaume Nault authored
PPPIOCGL2TPSTATS already uses 54. This shouldn't be a problem in practice, but let's keep the logical decreasing assignment scheme. Fixes: 4cf476ce ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/e3a4c355e3820331d8e1fffef8522739aae58b57.1608380117.git.gnault@redhat.comSigned-off-by:
-
