- 11 Feb, 2020 3 commits
-
-
Florian Westphal authored
Followup patch will need a helper function with the 'clashing entries refer to the identical tuple in both directions' resolution logic. This patch will add another resolve_clash helper where loser_ct must not be added to the dying list because it will be inserted into the table. Therefore this also moves the stat counters and dying-list insertion of the losing ct. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
... so it can be re-used from clash resolution in followup patch. Signed-off-by:
-
Florian Westphal authored
ctinfo is whats taken from the skb, i.e. ct = nf_ct_get(skb, &ctinfo). We do not pass 'ct' and instead re-fetch it from the skb. Just do the same for both netns and ctinfo. Also add a comment on what clash resolution is supposed to do. While at it, one indent level can be removed. Signed-off-by:
-
- 07 Feb, 2020 21 commits
-
-
Florian Westphal authored
nftables test case tests/shell/testcases/flowtable/0001flowtable_0 results in a crash. After the refactor, if we leave early via nf_flowtable_hw_offload(), then "struct flow_block_offload" is left in an uninitialized state, but later users assume its initialised. Fixes: a7965d58 ("netfilter: flowtable: add nf_flow_table_offload_cmd()") Signed-off-by:
-
Cong Wang authored
The user-specified hashtable size is unbound, this could easily lead to an OOM or a hung task as we hold the global mutex while allocating and initializing the new hashtable. Add a max value to cap both cfg->size and cfg->max, as suggested by Florian. Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
Cong Wang authored
It is unnecessary to hold hashlimit_mutex for htable_destroy() as it is already removed from the global hashtable and its refcount is already zero. Also, switch hinfo->use to refcount_t so that we don't have to hold the mutex until it reaches zero in htable_put(). Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com Acked-by:
-
David S. Miller authored
Ong Boon Leong says: ==================== net: stmmac: general fixes for Ethernet functionality 1/5: It ensures that the previous value of GMAC_VLAN_TAG register is read first before for updating the register. 2/5: Similar to 2/6 patch but it is a fix for XGMAC_VLAN_TAG register as requested by Jose Abreu. 3/5: It ensures the GMAC IP v4.xx and above behaves correctly to:- ip link set <devname> multicast off|on 4/5: Added similar IFF_MULTICAST flag for xgmac2, similar to 4/6. 5/5: It ensures PCI platform data is using plat->phy_interface. Changes from v4:- patch 1/6 - this patch is dropped now and will take the input on handling return value from netif_set_real_num_rx| tx_queues() in future patch series. v3:- patch 1/6 - add rtnl_lock() and rtnl_unlock() for stmmac_hw_setup() called inside stmmac_resume() patch 3/6 - Added new patch to fix XGMAC_VLAN_TAG register writting v2:- patch 1/5 - added control for rtnl_lock() & rtnl_unlock() to ensure they are used forstmmac_resume() patch 4/5 - added IFF_MULTICAST flag check for xgmac to ensure multicast works correctly. v1:- - Drop v1 patches (1/7, 3/7 & 4/7) that are not valid. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Voon Weifeng authored
The recent patch to support passive mode converter did not take care the phy interface configuration in PCI platform data. Hence, converting all the PCI platform data from plat->interface to plat->phy_interface as the default mode is meant for PHY. Fixes: 0060c878 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Tested-by:
Tan, Tee Min <tee.min.tan@intel.com> Signed-off-by:
Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
-
Tan, Tee Min authored
Without checking for IFF_MULTICAST flag, it is wrong to assume multicast filtering is always enabled. By checking against IFF_MULTICAST, now the driver behaves correctly when the multicast support is toggled by below command:- ip link set <devname> multicast off|on Fixes: 0efedbf1 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by:
-
Verma, Aashish authored
Without checking for IFF_MULTICAST flag, it is wrong to assume multicast filtering is always enabled. By checking against IFF_MULTICAST, now the driver behaves correctly when the multicast support is toggled by below command:- ip link set <devname> multicast off|on Fixes: 477286b5 ("stmmac: add GMAC4 core support") Signed-off-by:
Verma, Aashish <aashishx.verma@intel.com> Tested-by:
-
Ong Boon Leong authored
We should always do a read of current value of XGMAC_VLAN_TAG instead of directly overwriting the register value. Fixes: 3cd1cfcb ("net: stmmac: Implement VLAN Hash Filtering in XGMAC") Signed-off-by:
-
Tan, Tee Min authored
It should always do a read of current value of GMAC_VLAN_TAG instead of directly overwriting the register value. Fixes: c1be0022 ("net: stmmac: Add VLAN HASH filtering support in GMAC4+") Signed-off-by:
-
Haiyang Zhang authored
The caller of XDP_SETUP_PROG has already incremented refcnt in __bpf_prog_get(), so drivers should only increment refcnt by num_queues - 1. To fix the issue, update netvsc_xdp_set() to add the correct number to refcnt. Hold a refcnt in netvsc_xdp_set()’s other caller, netvsc_attach(). And, do the same in netvsc_vf_setxdp(). Otherwise, every time when VF is removed and added from the host side, the refcnt will be decreased by one, which may cause page fault when unloading xdp program. Fixes: 351e1581 ("hv_netvsc: Add XDP support") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
David S. Miller authored
Vinicius Costa Gomes says: ==================== taprio: Some fixes Changes from v3: - Replaced ENOTSUPP error code with EOPNOTSUPP (Jakub Kicinski); - Added the missing policy validation for the flags netlink argument (Jakub Kicinski); - Fixed the destroy() flow to also destroy the priority to traffic class mapping (David Miller); - Fixed dropping packets when taprio offloading is used together with ETF offloading (more on this below); Changes from v2: - Squashed commits 2/3 and 3/3 into a single one (I think a single commit is going to be easier to review); - Removed an "improvement" that was causing changes in user visible behavior; Changes from v1: - Fixed ignoring the 'flags' argument when adding a new instance (Vladimir Oltean); - Changed the order of commits; Updated cover letter: One bit that might need some attention is the fix for not dropping all packets when taprio and ETF offloading are used, patch 5/5. The behavior when the fix is applied is that packets that have a 'txtime' that would fall outside of their transmission window are now dropped by taprio. The question that might be raised is: should taprio be responsible for dropping these packets, or should it be handled lower in the stack? My opinion is: taprio has all the information, and it's able to give feeback to the user. Lower in the stack, those packets might go into the void, and the only feedback could be a hard to find counter increasing. Patch 1/5: Reported by Po Liu, is more of a improvement of usability for drivers implementing offloading features, now they can rely on the value of dev->num_tc, instead of going through some hops to get this value. Patch 2/5: Use 'q->flags' as the source of truth for the offloading flags. Tries to solidify the current behavior, while avoiding going into invalid states, one of which was causing a "rcu stall" (more information in the commit message). Patch 3/5: Adds the missing netlink attribute validation for TCA_TAPRIO_ATTR_FLAGS. Patch 4/5: Replaces the usage of netdev_set_num_tc() with netdev_reset_tc() in taprio_destroy(), taprio_destroy() is called when applying a configuration fails, making sure that the device traffic class configuration goes back to the default state. @Vladimir: If possible, I would appreciate your Ack on patch 2/5. I have been looking at this code for so long that I might have missed something obvious (and my growing dislike for the word 'flags' may be affecting my judgement :-). ==================== Signed-off-by: -
Vinicius Costa Gomes authored
When using taprio offloading together with ETF offloading, configured like this, for example: $ tc qdisc replace dev $IFACE parent root handle 100 taprio \ num_tc 4 \ map 2 2 1 0 3 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 1@2 1@3 \ base-time $BASE_TIME \ sched-entry S 01 1000000 \ sched-entry S 0e 1000000 \ flags 0x2 $ tc qdisc replace dev $IFACE parent 100:1 etf \ offload delta 300000 clockid CLOCK_TAI During enqueue, it works out that the verification added for the "txtime" assisted mode is run when using taprio + ETF offloading, the only thing missing is initializing the 'next_txtime' of all the cycle entries. (if we don't set 'next_txtime' all packets from SO_TXTIME sockets are dropped) Fixes: 4cfd5779 ("taprio: Add support for txtime-assist mode") Signed-off-by:Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Vinicius Costa Gomes authored
When destroying the current taprio instance, which can happen when the creation of one fails, we should reset the traffic class configuration back to the default state. netdev_reset_tc() is a better way because in addition to setting the number of traffic classes to zero, it also resets the priority to traffic classes mapping to the default value. Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler") Signed-off-by:
-
Vinicius Costa Gomes authored
netlink policy validation for the 'flags' argument was missing. Fixes: 4cfd5779 ("taprio: Add support for txtime-assist mode") Signed-off-by:
-
Vinicius Costa Gomes authored
Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779 ("taprio: Add support for txtime-assist mode") Signed-off-by:
-
Vinicius Costa Gomes authored
If the driver implementing taprio offloading depends on the value of the network device number of traffic classes (dev->num_tc) for whatever reason, it was going to receive the value zero. The value was only set after the offloading function is called. So, moving setting the number of traffic classes to before the offloading function is called fixes this issue. This is safe because this only happens when taprio is instantiated (we don't allow this configuration to be changed without first removing taprio). Fixes: 9c66d156 ("taprio: Add support for hardware offloading") Reported-by:
Po Liu <po.liu@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Florian Fainelli authored
The 7445 switch clocking profiles do not allow us to run the IMP port at 2Gb/sec in a way that it is reliable and consistent. Make sure that the setting is only applied to the 7278 family. Fixes: 8f1880cb ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
b53_configure_vlan() is called by the bcm_sf2 driver upon setup and indirectly through resume as well. During the initial setup, we are guaranteed that dev->vlan_enabled is false, so there is no change in behavior, however during suspend, we may have enabled VLANs before, so we do want to restore that setting. Fixes: dad8d7c6 ("net: dsa: b53: Properly account for VLAN filtering") Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by:
-
Dejin Zheng authored
It forgot to reduce the value of the variable retry in a while loop in the ethqos_configure() function. It may cause an endless loop and without timeout. Fixes: a7c30e62 ("net: stmmac: Add driver for Qualcomm ethqos") Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Acked-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
David Howells authored
rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a put call, calls rxrpc_put_connection() which, deep in its bowels, takes a number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and local->client_conns_lock. RCU callbacks, however, are normally called from softirq context, which can cause lockdep to notice the locking inconsistency. To get lockdep to detect this, it's necessary to have the connection cleaned up on the put at the end of the last of its calls, though normally the clean up is deferred. This can be induced, however, by starting a call on an AF_RXRPC socket and then closing the socket without reading the reply. Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a workqueue if in softirq-mode and defer the destruction to process context. Note that another way to fix this could be to add a bunch of bh-disable annotations to the spinlocks concerned - and there might be more than just those two - but that means spending more time with BHs disabled. Note also that some of these places were covered by bh-disable spinlocks belonging to the rxrpc_transport object, but these got removed without the _bh annotation being retained on the next lock in. Fixes: 999b69f8 ("rxrpc: Kill the client connection bundle concept") Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> Signed-off-by:
-
David Howells authored
The recent patch that substituted a flag on an rxrpc_call for the connection pointer being NULL as an indication that a call was disconnected puts the set_bit in the wrong place for service calls. This is only a problem if a call is implicitly terminated by a new call coming in on the same connection channel instead of a terminating ACK packet. In such a case, rxrpc_input_implicit_end_call() calls __rxrpc_disconnect_call(), which is now (incorrectly) setting the disconnection bit, meaning that when rxrpc_release_call() is later called, it doesn't call rxrpc_disconnect_call() and so the call isn't removed from the peer's error distribution list and the list gets corrupted. KASAN finds the issue as an access after release on a call, but the position at which it occurs is confusing as it appears to be related to a different call (the call site is where the latter call is being removed from the error distribution list and either the next or pprev pointer points to a previously released call). Fix this by moving the setting of the flag from __rxrpc_disconnect_call() to rxrpc_disconnect_call() in the same place that the connection pointer was being cleared. Fixes: 5273a191 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect") Signed-off-by:
-
- 06 Feb, 2020 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-02-06 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.19: ('net/mlx5: IPsec, Fix esp modify function attribute') ('net/mlx5: IPsec, fix memory leak at mlx5_fpga_ipsec_delete_sa_ctx') For -stable v5.4: ('net/mlx5: Deprecate usage of generic TLS HW capability bit') ('net/mlx5: Fix deadlock in fs_core') For -stable v5.5: ('net/mlx5e: TX, Error completion is for last WQE in batch') ==================== Signed-off-by: -
Tariq Toukan authored
Deprecate the generic TLS cap bit, use the new TX-specific TLS cap bit instead. Fixes: a12ff35e ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
For a cyclic work queue, when not requesting a completion per WQE, a single CQE might indicate the completion of several WQEs. However, in case some WQE in the batch causes an error, then an error completion is issued, breaking the batch, and pointing to the offending WQE in the wqe_counter field. Hence, WQE-specific error CQE handling (like printing, breaking, etc...) should be performed only for the last WQE in batch. Fixes: 130c7b46 ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events") Fixes: fd9b4be8 ("net/mlx5e: RX, Support multiple outstanding UMR posts") Signed-off-by:
Aya Levin <ayal@mellanox.com> Signed-off-by:
-
Raed Salem authored
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx, however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function nullifies sa_ctx pointer without freeing the memory allocated, hence the memory leak. Fix by free SA context when the SA is released. Fixes: d6c4f029 ("net/mlx5: Refactor accel IPSec code") Signed-off-by:
Raed Salem <raeds@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
-
Raed Salem authored
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used with negative negation as zero value indicates success but it used as failure return value instead. Fix by remove the unary not negation operator. Fixes: 05564d0a ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation") Signed-off-by:
-
Maor Gottlieb authored
free_match_list could be called when the flow table is already locked. We need to pass this notation to tree_put_node. It fixes the following lockdep warnning: [ 1797.268537] ============================================ [ 1797.276837] WARNING: possible recursive locking detected [ 1797.285101] 5.5.0-rc5+ #10 Not tainted [ 1797.291641] -------------------------------------------- [ 1797.299917] handler10/9296 is trying to acquire lock: [ 1797.307885] ffff889ad399a0a0 (&node->lock){++++}, at: tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.319694] [ 1797.319694] but task is already holding lock: [ 1797.330904] ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.344707] [ 1797.344707] other info that might help us debug this: [ 1797.356952] Possible unsafe locking scenario: [ 1797.356952] [ 1797.368333] CPU0 [ 1797.373357] ---- [ 1797.378364] lock(&node->lock); [ 1797.384222] lock(&node->lock); [ 1797.390031] [ 1797.390031] *** DEADLOCK *** [ 1797.390031] [ 1797.403003] May be due to missing lock nesting notation [ 1797.403003] [ 1797.414691] 3 locks held by handler10/9296: [ 1797.421465] #0: ffff889cf2c5a110 (&block->cb_lock){++++}, at: tc_setup_cb_add+0x70/0x250 [ 1797.432810] #1: ffff88a030081490 (&comp->sem){++++}, at: mlx5_devcom_get_peer_data+0x4c/0xb0 [mlx5_core] [ 1797.445829] #2: ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.459913] [ 1797.459913] stack backtrace: [ 1797.469436] CPU: 1 PID: 9296 Comm: handler10 Kdump: loaded Not tainted 5.5.0-rc5+ #10 [ 1797.480643] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 1797.491480] Call Trace: [ 1797.496701] dump_stack+0x96/0xe0 [ 1797.502864] __lock_acquire.cold.63+0xf8/0x212 [ 1797.510301] ? lockdep_hardirqs_on+0x250/0x250 [ 1797.517701] ? mark_held_locks+0x55/0xa0 [ 1797.524547] ? quarantine_put+0xb7/0x160 [ 1797.531422] ? lockdep_hardirqs_on+0x17d/0x250 [ 1797.538913] lock_acquire+0xd6/0x1f0 [ 1797.545529] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.553701] down_write+0x94/0x140 [ 1797.560206] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.568464] ? down_write_killable_nested+0x170/0x170 [ 1797.576925] ? del_hw_flow_group+0xde/0x1f0 [mlx5_core] [ 1797.585629] tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.593891] ? free_match_list.part.25+0x147/0x170 [mlx5_core] [ 1797.603389] free_match_list.part.25+0xe0/0x170 [mlx5_core] [ 1797.612654] _mlx5_add_flow_rules+0x17e2/0x20b0 [mlx5_core] [ 1797.621838] ? lock_acquire+0xd6/0x1f0 [ 1797.629028] ? esw_get_prio_table+0xb0/0x3e0 [mlx5_core] [ 1797.637981] ? alloc_insert_flow_group+0x420/0x420 [mlx5_core] [ 1797.647459] ? try_to_wake_up+0x4c7/0xc70 [ 1797.654881] ? lock_downgrade+0x350/0x350 [ 1797.662271] ? __mutex_unlock_slowpath+0xb1/0x3f0 [ 1797.670396] ? find_held_lock+0xac/0xd0 [ 1797.677540] ? mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.686467] mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.695134] ? _mlx5_add_flow_rules+0x20b0/0x20b0 [mlx5_core] [ 1797.704270] ? irq_exit+0xa5/0x170 [ 1797.710764] ? retint_kernel+0x10/0x10 [ 1797.717698] ? mlx5_eswitch_set_rule_source_port.isra.9+0x122/0x230 [mlx5_core] [ 1797.728708] mlx5_eswitch_add_offloaded_rule+0x465/0x6d0 [mlx5_core] [ 1797.738713] ? mlx5_eswitch_get_prio_range+0x30/0x30 [mlx5_core] [ 1797.748384] ? mlx5_fc_stats_work+0x670/0x670 [mlx5_core] [ 1797.757400] mlx5e_tc_offload_fdb_rules.isra.27+0x24/0x90 [mlx5_core] [ 1797.767665] mlx5e_tc_add_fdb_flow+0xaf8/0xd40 [mlx5_core] [ 1797.776886] ? mlx5e_encap_put+0xd0/0xd0 [mlx5_core] [ 1797.785562] ? mlx5e_alloc_flow.isra.43+0x18c/0x1c0 [mlx5_core] [ 1797.795353] __mlx5e_add_fdb_flow+0x2e2/0x440 [mlx5_core] [ 1797.804558] ? mlx5e_tc_update_neigh_used_value+0x8c0/0x8c0 [mlx5_core] [ 1797.815093] ? wait_for_completion+0x260/0x260 [ 1797.823272] mlx5e_configure_flower+0xe94/0x1620 [mlx5_core] [ 1797.832792] ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core] [ 1797.842096] ? down_read+0x11a/0x2e0 [ 1797.849090] ? down_write+0x140/0x140 [ 1797.856142] ? mlx5e_rep_indr_setup_block_cb+0xc0/0xc0 [mlx5_core] [ 1797.866027] tc_setup_cb_add+0x11a/0x250 [ 1797.873339] fl_hw_replace_filter+0x25e/0x320 [cls_flower] [ 1797.882385] ? fl_hw_destroy_filter+0x1c0/0x1c0 [cls_flower] [ 1797.891607] fl_change+0x1d54/0x1fb6 [cls_flower] [ 1797.899772] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.910728] ? lock_downgrade+0x350/0x350 [ 1797.918187] ? __radix_tree_lookup+0xa5/0x130 [ 1797.926046] ? fl_set_key+0x1590/0x1590 [cls_flower] [ 1797.934611] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.945673] tc_new_tfilter+0xcd1/0x1240 [ 1797.953138] ? tc_del_tfilter+0xb10/0xb10 [ 1797.960688] ? avc_has_perm_noaudit+0x92/0x320 [ 1797.968721] ? avc_has_perm_noaudit+0x1df/0x320 [ 1797.976816] ? avc_has_extended_perms+0x990/0x990 [ 1797.985090] ? mark_lock+0xaa/0x9e0 [ 1797.991988] ? match_held_lock+0x1b/0x240 [ 1797.999457] ? match_held_lock+0x1b/0x240 [ 1798.006859] ? find_held_lock+0xac/0xd0 [ 1798.014045] ? symbol_put_addr+0x40/0x40 [ 1798.021317] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.029460] ? tc_del_tfilter+0xb10/0xb10 [ 1798.036810] rtnetlink_rcv_msg+0x4d5/0x620 [ 1798.044236] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.052034] ? lockdep_hardirqs_on+0x250/0x250 [ 1798.059837] ? match_held_lock+0x1b/0x240 [ 1798.067146] ? find_held_lock+0xac/0xd0 [ 1798.074246] netlink_rcv_skb+0xc6/0x1f0 [ 1798.081339] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.089104] ? netlink_ack+0x440/0x440 [ 1798.096061] netlink_unicast+0x2d4/0x3b0 [ 1798.103189] ? netlink_attachskb+0x3f0/0x3f0 [ 1798.110724] ? _copy_from_iter_full+0xda/0x370 [ 1798.118415] netlink_sendmsg+0x3ba/0x6a0 [ 1798.125478] ? netlink_unicast+0x3b0/0x3b0 [ 1798.132705] ? netlink_unicast+0x3b0/0x3b0 [ 1798.139880] sock_sendmsg+0x94/0xa0 [ 1798.146332] ____sys_sendmsg+0x36c/0x3f0 [ 1798.153251] ? copy_msghdr_from_user+0x165/0x230 [ 1798.160941] ? kernel_sendmsg+0x30/0x30 [ 1798.167738] ___sys_sendmsg+0xeb/0x150 [ 1798.174411] ? sendmsg_copy_msghdr+0x30/0x30 [ 1798.181649] ? lock_downgrade+0x350/0x350 [ 1798.188559] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.196239] ? __fget+0x21d/0x320 [ 1798.202335] ? do_dup2+0x2a0/0x2a0 [ 1798.208499] ? lock_downgrade+0x350/0x350 [ 1798.215366] ? __fget_light+0xd6/0xf0 [ 1798.221808] ? syscall_trace_enter+0x369/0x5d0 [ 1798.229112] __sys_sendmsg+0xd3/0x160 [ 1798.235511] ? __sys_sendmsg_sock+0x60/0x60 [ 1798.242478] ? syscall_trace_enter+0x233/0x5d0 [ 1798.249721] ? syscall_slow_exit_work+0x280/0x280 [ 1798.257211] ? do_syscall_64+0x1e/0x2e0 [ 1798.263680] do_syscall_64+0x72/0x2e0 [ 1798.269950] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: bd71b08e ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by:Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Florian Fainelli authored
After a number of suspend and resume cycles, it is possible for the RBUF to be stuck in Wake-on-LAN mode, despite the MPD enable bit being cleared which instructed the RBUF to exit that mode. Avoid creating that problematic condition by clearing the RX_EN and TX_EN bits in the UniMAC prior to disable the Magic Packet Detector logic which is guaranteed to make the RBUF exit Wake-on-LAN mode. Fixes: 83e82f4c ("net: systemport: add Wake-on-LAN support") Signed-off-by:
-
Heiner Kallweit authored
It turned out that on low performance systems the original change can cause lower tx performance. On a N3450-based mini-PC tx performance in iperf3 was reduced from 950Mbps to ~900Mbps. Therefore effectively revert the original change, just use pcie_set_readrq() now instead of changing the PCIe capability register directly. Fixes: 2df49d36 ("r8169: remove fiddling with the PCIe max read request size") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The bug is that we call kfree_skb(skb) and then pass "skb" to qdisc_pkt_len(skb) on the next line, which is a use after free. Also Cong Wang points out that it's better to delay the actual frees until we drop the rtnl lock so we should use rtnl_kfree_skbs() instead of kfree_skb(). Cc: Cong Wang <xiyou.wangcong@gmail.com> Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Qian Cai authored
sk_buff.qlen can be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96: unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821 net/unix/af_unix.c:1761 ____sys_sendmsg+0x33e/0x370 ___sys_sendmsg+0xa6/0xf0 __sys_sendmsg+0x69/0xf0 __x64_sys_sendmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99: __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029 __skb_try_recv_datagram+0xbe/0x220 unix_dgram_recvmsg+0xee/0x850 ____sys_recvmsg+0x1fb/0x210 ___sys_recvmsg+0xa2/0xf0 __sys_recvmsg+0x66/0xf0 __x64_sys_recvmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe Since only the read is operating as lockless, it could introduce a logic bug in unix_recvq_full() due to the load tearing. Fix it by adding a lockless variant of skb_queue_len() and unix_recvq_full() where READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to the commit d7d16a89 ("net: add skb_queue_empty_lockless()"). Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Lorenzo Bianconi authored
Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to avoid possible races updating statistics Fixes: 562e2f46 ("net: mvneta: Improve the buffer allocation method for SWBM") Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management") Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Devulapally Shiva Krishna authored
Added debugfs entry to show the tls stats. Signed-off-by:
Devulapally Shiva Krishna <shiva@chelsio.com> Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by:
-
Florian Westphal authored
Turns out that when we accept a new subflow, the newly created inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the listener socket. This wasn't caught by the selftest because it closes the accepted fd before the listening one. adding a close(listenfd) after accept returns is enough: BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790 Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518 Call Trace: inet6_getname+0x6ba/0x790 __sys_getpeername+0x10b/0x250 __x64_sys_getpeername+0x6f/0xb0 also alter test program to exercise this. Reported-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
- 05 Feb, 2020 3 commits
-
-
Sudarsana Reddy Kalluru authored
commit cedeac9d ("qed: Add support for Timestamping the unicast PTP packets.") handles the timestamping of L4 ptp packets only. This patch adds driver changes to detect/timestamp both L2/L4 unicast PTP packets. Fixes: cedeac9d ("qed: Add support for Timestamping the unicast PTP packets.") Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
David S. Miller authored
Harini Katakam says: ==================== macb: TSO bug fixes An IP errata was recently discovered when testing TSO enabled versions with perf test tools where a false amba error is reported by the IP. Some ways to reproduce would be to use iperf or applications with payload descriptor sizes very close to 16K. Once the error is observed TXERR (or bit 6 of ISR) will be constantly triggered leading to a series of tx path error handling and clean up. Workaround the same by limiting this size to 0x3FC0 as recommended by Cadence. There was no performance impact on 1G system that I tested with. Note on patch 1: The alignment code may be unused but leaving it there in case anyone is using UFO. Added Fixes tag to patch 1. ==================== Signed-off-by: -
Harini Katakam authored
GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting TSO with full 14bits of length field in payload descriptor. But an IP errata causes false amba_error (bit 6 of ISR) when length in payload descriptors is specified above 16387. The error occurs because the DMA falsely concludes that there is not enough space in SRAM for incoming payload. These errors were observed continuously under stress of large packets using iperf on a version where SRAM was 16K for each queue. This errata will be documented shortly and affects all versions since TSO functionality was added. Hence limit the max length to 0x3FC0 (rounded). Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
-
