- 16 Sep, 2022 7 commits
-
-
Benjamin Poirier authored
Test that the bonding and team drivers clean up an underlying device's address lists (dev->uc, dev->mc) when the aggregated device is deleted. Test addition and removal of the LACPDU multicast address on underlying devices by the bonding driver. v2: * add lag_lib.sh to TEST_FILES v3: * extend bond_listen_lacpdu_multicast test to init_state up and down cases * remove some superfluous shell syntax and 'set dev ... up' commands Signed-off-by:
Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Benjamin Poirier authored
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4c ("net: introduce ethernet teaming device") Signed-off-by: -
Benjamin Poirier authored
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former bond slaves after a bond has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls, via bond_hw_addr_flush(), at their expected location, bond_close(). Add dev_mc_add() call to bond_open() to match the above change. v3: * When adding or deleting a slave, only sync/unsync, add/del addresses if the bond is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: -
Benjamin Poirier authored
There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-08 (ice, iavf) This series contains updates to ice and iavf drivers. Dave removes extra unplug of auxiliary bus on reset which caused a scheduling while atomic to be reported for ice. Ding Hui defers setting of queues for TCs to ensure valid configuration and restores old config if invalid for ice. Sylwester fixes a check of setting MAC address to occur after result is received from PF for iavf driver. Brett changes check of ring tail to use software cached value as not all devices have access to register tail for iavf driver. ==================== Signed-off-by: -
Oleksandr Mazur authored
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support. Signed-off-by:
Oleksandr Mazur <oleksandr.mazur@plvision.eu> V2: - retarget to net tree instead of net-next; - fix missed colon in patch subject ('net marvell' vs 'net: mavell'); Signed-off-by:
-
Haimin Zhang authored
There is uninit value bug in dgram_sendmsg function in net/ieee802154/socket.c when the length of valid data pointed by the msg->msg_name isn't verified. We introducing a helper function ieee802154_sockaddr_check_size to check namelen. First we check there is addr_type in ieee802154_addr_sa. Then, we check namelen according to addr_type. Also fixed in raw_bind, dgram_bind, dgram_connect. Signed-off-by:
Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by:
-
- 13 Sep, 2022 3 commits
-
-
Matthieu Baerts authored
When looking at the rendered HTML version, we can see 'pm_type' is not displayed with a bold font: https://docs.kernel.org/5.19/networking/mptcp-sysctl.html The empty line under 'pm_type' is then removed to have the same style as the others. Fixes: 6bb63ccc ("mptcp: Add a per-namespace sysctl to set the default path manager type") Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20220906180404.1255873-2-matthieu.baerts@tessares.netSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
The intel bot reported a memory accounting related splat: [ 240.473094] ------------[ cut here ]------------ [ 240.478507] page_counter underflow: -4294828518 nr_pages=4294967290 [ 240.485500] WARNING: CPU: 2 PID: 14986 at mm/page_counter.c:56 page_counter_cancel+0x96/0xc0 [ 240.570849] CPU: 2 PID: 14986 Comm: mptcp_connect Tainted: G S 5.19.0-rc4-00739-gd24141fe #1 [ 240.581637] Hardware name: HP HP Z240 SFF Workstation/802E, BIOS N51 Ver. 01.63 10/05/2017 [ 240.590600] RIP: 0010:page_counter_cancel+0x96/0xc0 [ 240.596179] Code: 00 00 00 45 31 c0 48 89 ef 5d 4c 89 c6 41 5c e9 40 fd ff ff 4c 89 e2 48 c7 c7 20 73 39 84 c6 05 d5 b1 52 04 01 e8 e7 95 f3 01 <0f> 0b eb a9 48 89 ef e8 1e 25 fc ff eb c3 66 66 2e 0f 1f 84 00 00 [ 240.615639] RSP: 0018:ffffc9000496f7c8 EFLAGS: 00010082 [ 240.621569] RAX: 0000000000000000 RBX: ffff88819c9c0120 RCX: 0000000000000000 [ 240.629404] RDX: 0000000000000027 RSI: 0000000000000004 RDI: fffff5200092deeb [ 240.637239] RBP: ffff88819c9c0120 R08: 0000000000000001 R09: ffff888366527a2b [ 240.645069] R10: ffffed106cca4f45 R11: 0000000000000001 R12: 00000000fffffffa [ 240.652903] R13: ffff888366536118 R14: 00000000fffffffa R15: ffff88819c9c0000 [ 240.660738] FS: 00007f3786e72540(0000) GS:ffff888366500000(0000) knlGS:0000000000000000 [ 240.669529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 240.675974] CR2: 00007f966b346000 CR3: 0000000168cea002 CR4: 00000000003706e0 [ 240.683807] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 240.691641] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 240.699468] Call Trace: [ 240.702613] <TASK> [ 240.705413] page_counter_uncharge+0x29/0x80 [ 240.710389] drain_stock+0xd0/0x180 [ 240.714585] refill_stock+0x278/0x580 [ 240.718951] __sk_mem_reduce_allocated+0x222/0x5c0 [ 240.729248] __mptcp_update_rmem+0x235/0x2c0 [ 240.734228] __mptcp_move_skbs+0x194/0x6c0 [ 240.749764] mptcp_recvmsg+0xdfa/0x1340 [ 240.763153] inet_recvmsg+0x37f/0x500 [ 240.782109] sock_read_iter+0x24a/0x380 [ 240.805353] new_sync_read+0x420/0x540 [ 240.838552] vfs_read+0x37f/0x4c0 [ 240.842582] ksys_read+0x170/0x200 [ 240.864039] do_syscall_64+0x5c/0x80 [ 240.872770] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 240.878526] RIP: 0033:0x7f3786d9ae8e [ 240.882805] Code: c0 e9 b6 fe ff ff 50 48 8d 3d 6e 18 0a 00 e8 89 e8 01 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 [ 240.902259] RSP: 002b:00007fff7be81e08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 240.910533] RAX: ffffffffffffffda RBX: 0000000000002000 RCX: 00007f3786d9ae8e [ 240.918368] RDX: 0000000000002000 RSI: 00007fff7be87ec0 RDI: 0000000000000005 [ 240.926206] RBP: 0000000000000005 R08: 00007f3786e6a230 R09: 00007f3786e6a240 [ 240.934046] R10: fffffffffffff288 R11: 0000000000000246 R12: 0000000000002000 [ 240.941884] R13: 00007fff7be87ec0 R14: 00007fff7be87ec0 R15: 0000000000002000 [ 240.949741] </TASK> [ 240.952632] irq event stamp: 27367 [ 240.956735] hardirqs last enabled at (27366): [<ffffffff81ba50ea>] mem_cgroup_uncharge_skmem+0x6a/0x80 [ 240.966848] hardirqs last disabled at (27367): [<ffffffff81b8fd42>] refill_stock+0x282/0x580 [ 240.976017] softirqs last enabled at (27360): [<ffffffff83a4d8ef>] mptcp_recvmsg+0xaf/0x1340 [ 240.985273] softirqs last disabled at (27364): [<ffffffff83a4d30c>] __mptcp_move_skbs+0x18c/0x6c0 [ 240.994872] ---[ end trace 0000000000000000 ]--- After commit d24141fe ("mptcp: drop SK_RECLAIM_* macros"), if rmem_fwd_alloc become negative, mptcp_rmem_uncharge() can try to reclaim a negative amount of pages, since the expression: reclaimable >= PAGE_SIZE will evaluate to true for any negative value of the int 'reclaimable': 'PAGE_SIZE' is an unsigned long and the negative integer will be promoted to a (very large) unsigned long value. Still after the mentioned commit, kfree_skb_partial() in mptcp_try_coalesce() will reclaim most of just released fwd memory, so that following charging of the skb delta size will lead to negative fwd memory values. At that point a racing recvmsg() can trigger the splat. Address the issue switching the order of the memory accounting operations. The fwd memory can still transiently reach negative values, but that will happen in an atomic scope and no code path could touch/use such value. Reported-by:
kernel test robot <oliver.sang@intel.com> Fixes: d24141fe ("mptcp: drop SK_RECLAIM_* macros") Signed-off-by:
-
Ioana Ciornei authored
The Aquantia datasheet notes that after issuing a Processor-Intensive MDIO operation, like changing the low-power state of the device, the driver should wait for the operation to finish before issuing a new MDIO command. The new aqr107_wait_processor_intensive_op() function is added which can be used after these kind of MDIO operations. At the moment, we are only adding it at the end of the suspend/resume calls. The issue was identified on a board featuring the AQR113C PHY, on which commands like 'ip link (..) up / down' issued without any delays between them would render the link on the PHY to remain down. The issue was easy to reproduce with a one-liner: $ ip link set dev ethX down; ip link set dev ethX up; \ ip link set dev ethX down; ip link set dev ethX up; Fixes: ac9e81c2 ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220906130451.1483448-1-ioana.ciornei@nxp.comSigned-off-by:
-
- 09 Sep, 2022 3 commits
-
-
Ludovic Cintrat authored
__flow_hash_consistentify() wrongly swaps ipv4 addresses in few cases. This function is indirectly used by __skb_get_hash_symmetric(), which is used to fanout packets in AF_PACKET. Intrusion detection systems may be impacted by this issue. __flow_hash_consistentify() computes the addresses difference then swaps them if the difference is negative. In few cases src - dst and dst - src are both negative. The following snippet mimics __flow_hash_consistentify(): ``` #include <stdio.h> #include <stdint.h> int main(int argc, char** argv) { int diffs_d, diffd_s; uint32_t dst = 0xb225a8c0; /* 178.37.168.192 --> 192.168.37.178 */ uint32_t src = 0x3225a8c0; /* 50.37.168.192 --> 192.168.37.50 */ uint32_t dst2 = 0x3325a8c0; /* 51.37.168.192 --> 192.168.37.51 */ diffs_d = src - dst; diffd_s = dst - src; printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n", src, dst, diffs_d, diffs_d, diffd_s, diffd_s); diffs_d = src - dst2; diffd_s = dst2 - src; printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n", src, dst2, diffs_d, diffs_d, diffd_s, diffd_s); return 0; } ``` Results: src:3225a8c0 dst:b225a8c0, \ diff(s-d)=-2147483648(0x80000000) \ diff(d-s)=-2147483648(0x80000000) src:3225a8c0 dst:3325a8c0, \ diff(s-d)=-16777216(0xff000000) \ diff(d-s)=16777216(0x1000000) In the first case the addresses differences are always < 0, therefore __flow_hash_consistentify() always swaps, thus dst->src and src->dst packets have differents hashes. Fixes: c3f83241 ("net: Add full IPv6 addresses to flow_keys") Signed-off-by:Ludovic Cintrat <ludovic.cintrat@gatewatcher.com> Signed-off-by:
-
Lu Wei authored
If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:Lu Wei <luwei32@huawei.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
Florian Westhal says: ==================== netfilter: bugfixes for net The following set contains four netfilter patches for your *net* tree. When there are multiple Contact headers in a SIP message its possible the next headers won't be found because the SIP helper confuses relative and absolute offsets in the message. From Igor Ryzhov. Make the nft_concat_range self-test support socat, this makes the selftest pass on my test VM, from myself. nf_conntrack_irc helper can be tricked into opening a local port forward that the client never requested by embedding a DCC message in a PING request sent to the client. Fix from David Leadbeater. Both have been broken since the kernel 2.6.x days. The 'osf' match might indicate success while it could not find anything, broken since 5.2 . Fix from Pablo Neira. ==================== Signed-off-by:
-
- 08 Sep, 2022 9 commits
-
-
Brett Creeley authored
The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c1259 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Co-developed-by:
Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sylwester Dziedziuch authored
Previously changing mac address gives false negative because ip link set <interface> address <MAC> return with RTNLINK: Permission denied. In iavf_set_mac was check if PF handled our mac set request, even before filter was added to list. Because this check returns always true and it never waits for PF's response. Move iavf_is_mac_handled to wait_event_interruptible_timeout instead of false. Now it will wait for PF's response and then check if address was added or rejected. Fixes: 35a2443d ("iavf: Add waiting for response from PF in set mac") Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Co-developed-by:
-
Ding Hui authored
There are problems if allocated queues less than Traffic Classes. Commit a632b2a4 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed. Fixes: a632b2a4 ("ice: ethtool: Prohibit improper channel config for DCB") Signed-off-by:
Ding Hui <dinghui@sangfor.com.cn> Reviewed-by:
Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Dave Ertman authored
In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] ice 0000:4c:00.0 rocep76s0: [Modify QP Cmd Error][op_code=8] status=-29 waiting=1 completion_err=1 maj=0xffff min=0x8003 [ 662.815006] ice 0000:4c:00.0 rocep76s0: ICE OICR event notification: oicr = 0x10000003 [ 662.815014] ice 0000:4c:00.0 rocep76s0: critical PE Error, GLPE_CRITERR=0x00011424 [ 662.815017] ice 0000:4c:00.0 rocep76s0: Requesting a reset [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815477] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill 8021q garp mrp stp llc vfat fat rpcrdma intel_rapl_msr intel_rapl_common sunrpc i10nm_edac rdma_ucm nfit ib_srpt libnvdimm ib_isert iscsi_target_mod x86_pkg_temp_thermal intel_powerclamp coretemp target_core_mod snd_hda_intel ib_iser snd_intel_dspcfg libiscsi snd_intel_sdw_acpi scsi_transport_iscsi kvm_intel iTCO_wdt rdma_cm snd_hda_codec kvm iw_cm ipmi_ssif iTCO_vendor_support snd_hda_core irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device rapl snd_pcm snd_timer isst_if_mbox_pci pcspkr isst_if_mmio irdma intel_uncore idxd acpi_ipmi joydev isst_if_common snd mei_me idxd_bus ipmi_si soundcore i2c_i801 mei ipmi_devintf i2c_smbus i2c_ismt ipmi_msghandler acpi_power_meter acpi_pad rv(OE) ib_uverbs ib_cm ib_core xfs libcrc32c ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm_ttm_helpe r ttm [ 662.815546] nvme nvme_core ice drm crc32c_intel i40e t10_pi wmi pinctrl_emmitsburg dm_mirror dm_region_hash dm_log dm_mod fuse [ 662.815557] Preemption disabled at: [ 662.815558] [<0000000000000000>] 0x0 [ 662.815563] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S OE 5.17.1 #2 [ 662.815566] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815568] Call Trace: [ 662.815572] <IRQ> [ 662.815574] dump_stack_lvl+0x33/0x42 [ 662.815581] __schedule_bug.cold.147+0x7d/0x8a [ 662.815588] __schedule+0x798/0x990 [ 662.815595] schedule+0x44/0xc0 [ 662.815597] schedule_preempt_disabled+0x14/0x20 [ 662.815600] __mutex_lock.isra.11+0x46c/0x490 [ 662.815603] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815633] device_del+0x37/0x3d0 [ 662.815639] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815674] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815693] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815712] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815719] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.815741] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.815756] __handle_irq_event_percpu+0x4c/0x180 [ 662.815762] handle_irq_event_percpu+0xf/0x40 [ 662.815764] handle_irq_event+0x34/0x60 [ 662.815766] handle_edge_irq+0x9a/0x1c0 [ 662.815770] __common_interrupt+0x62/0x100 [ 662.815774] common_interrupt+0xb4/0xd0 [ 662.815779] </IRQ> [ 662.815780] <TASK> [ 662.815780] asm_common_interrupt+0x1e/0x40 [ 662.815785] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.815789] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.815791] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.815793] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.815795] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.815796] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.815797] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.815798] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.815801] cpuidle_enter+0x29/0x40 [ 662.815803] do_idle+0x261/0x2b0 [ 662.815807] cpu_startup_entry+0x19/0x20 [ 662.815809] start_secondary+0x114/0x150 [ 662.815813] secondary_startup_64_no_verify+0xd5/0xdb [ 662.815818] </TASK> [ 662.815846] bad: scheduling from the idle thread! [ 662.815849] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S W OE 5.17.1 #2 [ 662.815852] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815853] Call Trace: [ 662.815855] <IRQ> [ 662.815856] dump_stack_lvl+0x33/0x42 [ 662.815860] dequeue_task_idle+0x20/0x30 [ 662.815863] __schedule+0x1c3/0x990 [ 662.815868] schedule+0x44/0xc0 [ 662.815871] schedule_preempt_disabled+0x14/0x20 [ 662.815873] __mutex_lock.isra.11+0x3a8/0x490 [ 662.815876] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815904] device_del+0x37/0x3d0 [ 662.815909] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815937] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815961] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815979] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815985] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.816011] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.816033] __handle_irq_event_percpu+0x4c/0x180 [ 662.816037] handle_irq_event_percpu+0xf/0x40 [ 662.816039] handle_irq_event+0x34/0x60 [ 662.816042] handle_edge_irq+0x9a/0x1c0 [ 662.816045] __common_interrupt+0x62/0x100 [ 662.816048] common_interrupt+0xb4/0xd0 [ 662.816052] </IRQ> [ 662.816053] <TASK> [ 662.816054] asm_common_interrupt+0x1e/0x40 [ 662.816057] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.816060] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.816063] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.816065] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.816067] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.816068] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.816070] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.816071] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.816075] cpuidle_enter+0x29/0x40 [ 662.816077] do_idle+0x261/0x2b0 [ 662.816080] cpu_startup_entry+0x19/0x20 [ 662.816083] start_secondary+0x114/0x150 [ 662.816087] secondary_startup_64_no_verify+0xd5/0xdb [ 662.816091] </TASK> [ 662.816169] bad: scheduling from the idle thread! The correct place to unplug the aux devices for a reset is in the prepare_for_reset function, as this is a common place for all reset flows. It also has built in protection from being called twice in a single reset instance before the aux devices are replugged. Fixes: f9f5301e ("ice: Register auxiliary device to provide RDMA") Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from rxrpc, netfilter, wireless and bluetooth subtrees. Current release - regressions: - skb: export skb drop reaons to user by TRACE_DEFINE_ENUM - bluetooth: fix regression preventing ACL packet transmission Current release - new code bugs: - dsa: microchip: fix kernel oops on ksz8 switches - dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data Previous releases - regressions: - netfilter: clean up hook list when offload flags check fails - wifi: mt76: fix crash in chip reset fail - rxrpc: fix ICMP/ICMP6 error handling - ice: fix DMA mappings leak - i40e: fix kernel crash during module removal Previous releases - always broken: - ipv6: sr: fix out-of-bounds read when setting HMAC data. - tcp: TX zerocopy should not sense pfmemalloc status - sch_sfb: don't assume the skb is still around after enqueueing to child - netfilter: drop dst references before setting - wifi: wilc1000: fix DMA on stack objects - rxrpc: fix an insufficiently large sglist in rxkad_verify_packet_2() - fec: use a spinlock to guard `fep->ptp_clk_on` Misc: - usb: qmi_wwan: add Quectel RM520N" * tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) sch_sfb: Also store skb len before calling child enqueue net: phy: lan87xx: change interrupt src of link_up to comm_ready net/smc: Fix possible access to freed memory in link clear net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet net: usb: qmi_wwan: add Quectel RM520N net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data tcp: fix early ETIMEDOUT after spurious non-SACK RTO stmmac: intel: Simplify intel_eth_pci_remove() net: mvpp2: debugfs: fix memory leak when using debugfs_lookup() ipv6: sr: fix out-of-bounds read when setting HMAC data. bonding: accept unsolicited NA message bonding: add all node mcast address when slave up bonding: use unspecified address if no available link local address wifi: use struct_group to copy addresses wifi: mac80211_hwsim: check length for virtio packets ... -
Linus Torvalds authored
Commit d4252071 ("add barriers to buffer_uptodate and set_buffer_uptodate") added proper memory barriers to the buffer head BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date will be guaranteed to actually see initialized state. However, that commit didn't _just_ add the memory barrier, it also ended up dropping the "was it already set" logic that the BUFFER_FNS() macro had. That's conceptually the right thing for a generic "this is a memory barrier" operation, but in the case of the buffer contents, we really only care about the memory barrier for the _first_ time we set the bit, in that the only memory ordering protection we need is to avoid anybody seeing uninitialized memory contents. Any other access ordering wouldn't be about the BH_Uptodate bit anyway, and would require some other proper lock (typically BH_Lock or the folio lock). A reader that races with somebody invalidating the buffer head isn't an issue wrt the memory ordering, it's a serialization issue. Now, you'd think that the buffer head operations don't matter in this day and age (and I certainly thought so), but apparently some loads still end up being heavy users of buffer heads. In particular, the kernel test robot reported that not having this bit access optimization in place caused a noticeable direct IO performance regression on ext4: fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression although you presumably need a fast disk and a lot of cores to actually notice. Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/Reported-by:
Fengwei Yin <fengwei.yin@intel.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: "A couple of low-priority EFI fixes: - prevent the randstruct plugin from re-ordering EFI protocol definitions - fix a use-after-free in the capsule loader - drop unused variable" * tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: capsule-loader: Fix use-after-free in efi_capsule_write efi/x86: libstub: remove unused variable efi: libstub: Disable struct randomization -
Toke Høiland-Jørgensen authored
Cong Wang noticed that the previous fix for sch_sfb accessing the queued skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue function was also calling qdisc_qstats_backlog_inc() after enqueue, which reads the pkt len from the skb cb field. Fix this by also storing the skb len, and using the stored value to increment the backlog after enqueueing. Fixes: 9efd2329 ("sch_sfb: Don't assume the skb is still around after enqueueing to child") Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Acked-by:
Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dkSigned-off-by:
-
Arun Ramadoss authored
Currently phy link up/down interrupt is enabled using the LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function, phy link is determined using the T1_MODE_STAT_REG register comm_ready bit. comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status. Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set first but comm_ready bit takes some time to set based on local and remote receiver status. As per the current implementation, interrupt is triggered using link_up but the comm_ready bit is still cleared in the read_status function. So, link is always down. Initially tested with the shared interrupt mechanism with switch and internal phy which is working, but after implementing interrupt controller it is not working. It can fixed either by updating the read_status function to read from LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for comm_ready bit. But the validation team recommends the use of comm_ready for link detection. This patch fixes by enabling the comm_ready bit for link_up in the LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in LAN87xx_INTERRUPT_MASK register. Fixes: 8a1b415d ("net: phy: added ethtool master-slave configuration support") Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
-
- 07 Sep, 2022 16 commits
-
-
Hyunwoo Kim authored
A race condition may occur if the user calls close() on another thread during a write() operation on the device node of the efi capsule. This is a race condition that occurs between the efi_capsule_write() and efi_capsule_flush() functions of efi_capsule_fops, which ultimately results in UAF. So, the page freeing process is modified to be done in efi_capsule_release() instead of efi_capsule_flush(). Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Hyunwoo Kim <imv4bel@gmail.com> Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/Signed-off-by:
Ard Biesheuvel <ardb@kernel.org>
-
Yacan Liu authored
After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad577 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by:
Yacan Liu <liuyacan@corp.netease.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Lorenzo Bianconi authored
Even if max hash configured in hw in mtk_ppe_hash_entry is MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in mtk_ppe_check_skb routine Fixes: c4f033d9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Menglong Dong authored
As Eric reported, the 'reason' field is not presented when trace the kfree_skb event by perf: $ perf record -e skb:kfree_skb -a sleep 10 $ perf script ip_defrag 14605 [021] 221.614303: skb:kfree_skb: skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1 reason: The cause seems to be passing kernel address directly to TP_printk(), which is not right. As the enum 'skb_drop_reason' is not exported to user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason string from the 'reason' field, which is a number. Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used to define the trace enum by TRACE_DEFINE_ENUM(). With the help of DEFINE_DROP_REASON(), now we can remove the auto-generate that we introduced in the commit ec43908d ("net: skb: use auto-generation to convert skb drop reason to string"), and define the string array 'drop_reasons'. Hmmmm...now we come back to the situation that have to maintain drop reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they are both in dropreason.h, which makes it easier. After this commit, now the format of kfree_skb is like this: $ cat /tracing/events/skb/kfree_skb/format name: kfree_skb ID: 1524 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:void * skbaddr; offset:8; size:8; signed:0; field:void * location; offset:16; size:8; signed:0; field:unsigned short protocol; offset:24; size:2; signed:0; field:enum skb_drop_reason reason; offset:28; size:4; signed:0; print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ...... Fixes: ec43908d ("net: skb: use auto-generation to convert skb drop reason to string") Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/Reported-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
-
Lorenzo Bianconi authored
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine. Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Signed-off-by:
-
Pablo Neira Ayuso authored
nf_osf_find() incorrectly returns true on mismatch, this leads to copying uninitialized memory area in nft_osf which can be used to leak stale kernel stack data to userspace. Fixes: 22c7652c ("netfilter: nft_osf: Add version option support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Florian Westphal <fw@strlen.de>
-
David Leadbeater authored
CTCP messages should only be at the start of an IRC message, not anywhere within it. While the helper only decodes packes in the ORIGINAL direction, its possible to make a client send a CTCP message back by empedding one into a PING request. As-is, thats enough to make the helper believe that it saw a CTCP message. Fixes: 869f37d8 ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port") Signed-off-by:
David Leadbeater <dgl@dgl.cx> Signed-off-by:
-
Florian Westphal authored
There are different flavors of 'nc' around, this script fails on my test vm because 'nc' is 'nmap-ncat' which isn't 100% compatible. Add socat support and use it if available. Signed-off-by: -
Igor Ryzhov authored
ct_sip_next_header and ct_sip_get_header return an absolute value of matchoff, not a shift from current dataoff. So dataoff should be assigned matchoff, not incremented by it. This issue can be seen in the scenario when there are multiple Contact headers and the first one is using a hostname and other headers use IP addresses. In this case, ct_sip_walk_headers will work as follows: The first ct_sip_get_header call to will find the first Contact header but will return -1 as the header uses a hostname. But matchoff will be changed to the offset of this header. After that, dataoff should be set to matchoff, so that the next ct_sip_get_header call find the next Contact header. But instead of assigning dataoff to matchoff, it is incremented by it, which is not correct, as matchoff is an absolute value of the offset. So on the next call to the ct_sip_get_header, dataoff will be incorrect, and the next Contact header may not be found at all. Fixes: 05e3ced2 ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper") Signed-off-by:
Igor Ryzhov <iryzhov@nfware.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for Felix DSA driver calculation of tc-taprio guard bands This series fixes some bugs which are not quite new, but date from v5.13 when static guard bands were enabled by Michael Walle to prevent tc-taprio overruns. The investigation started when Xiaoliang asked privately what is the expected max SDU for a traffic class when its minimum gate interval is 10 us. The answer, as it turns out, is not an L1 size of 1250 octets, but 1245 octets, since otherwise, the switch will not consider frames for egress scheduling, because the static guard band is exactly as large as the time interval. The switch needs a minimum of 33 ns outside of the guard band to consider a frame for scheduling, and the reduction of the max SDU by 5 provides exactly for that. The fix for that (patch 1/3) is relatively small, but during testing, it became apparent that cut-through forwarding prevents oversized frame dropping from working properly. This is solved through the larger patch 2/3. Finally, patch 3/3 fixes one more tc-taprio locking problem found through code inspection. ==================== Signed-off-by: -
Vladimir Oltean authored
The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set() runs unlocked with respect to the other functions that access it, which are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock, so move the vsc9959_sched_speed_set() access under that lock as well, to resolve the concurrency. Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605, frames even way larger than 601 octets are transmitted even though these should be considered as oversized, according to the documentation, and dropped. Since oversized frame dropping depends on frame size, which is only known at the EOF stage, and therefore not at SOF when cut-through forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_* into consideration for traffic classes that are cut-through. Since cut-through forwarding has no UAPI to control it, and the driver enables it based on the mantra "if we can, then why not", the strategy is to alter vsc9959_cut_through_fwd() to take into consideration which tc's have oversize frame dropping enabled, and disable cut-through for them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the cut-through determination process. There are 2 strategies for vsc9959_cut_through_fwd() to determine whether a tc has oversized dropping enabled or not. One is to keep a bit mask of traffic classes per port, and the other is to read back from the hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the feature is enabled). We choose reading back from registers, because struct ocelot_port is shared with drivers (ocelot, seville) that don't support either cut-through nor tc-taprio, and we don't have a felix specific extension of struct ocelot_port. Furthermore, reading registers from the Felix hardware is quite cheap, since they are memory-mapped. Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by:
-
Vladimir Oltean authored
The blamed commit broke tc-taprio schedules such as this one: tc qdisc replace dev $swp1 root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 \ sched-entry S 0x7f 990000 \ sched-entry S 0x80 10000 \ flags 0x2 because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard band added earlier than its 'gate close' event, such that packet overruns won't occur in the worst case of the largest packet possible. Since guard bands are statically determined based on the per-tc QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU, we need to discuss what happens with TC 7 depending on kernel version, since the driver, prior to commit 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port"), did not touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU. 1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to 1518, and at gigabit this introduces a static guard band (independent of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit time of 20 octets => 160 ns). But this is larger than the time window itself, of 10000 ns. So, the queue system never considers a frame with TC 7 as eligible for transmission, since the gate practically never opens, and these frames are forever stuck in the TX queues and hang the port. 2 (after vsc9959_tas_guard_bands_update): Under the sole goal of enabling oversized frame dropping, we make an effort to set QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays one more role, which we did not take into account: per-tc static guard band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead). There is a discrepancy between what the driver thinks (that there is no guard band, and 100% of min_gate_len[tc] is available for egress scheduling) and what the hardware actually does (crops the equivalent of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this means that the hardware thinks it has exactly 0 ns for scheduling tc 7. In both cases, even minimum sized Ethernet frames are stuck on egress rather than being considered for scheduling on TC 7, even if they would fit given a proper configuration. Considering the current situation, with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230 octets in size are not eligible for oversized dropping (because they are smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible for scheduling either, because the min_gate_len[7] (10000 ns) minus the guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per octet == 9840 ns) minus the guard band auto-added for L1 overhead by QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets) leaves 0 ns for scheduling in the queue system proper. Investigating the hardware behavior, it becomes apparent that the queue system needs precisely 33 ns of 'gate open' time in order to consider a frame as eligible for scheduling to a tc. So the solution to this problem is to amend vsc9959_tas_guard_bands_update(), by giving the per-tc guard bands less space by exactly 33 ns, just enough for one frame to be scheduled in that interval. This allows the queue system to make forward progress for that port-tc, and prevents it from hanging. Fixes: 297c4de6 ("net: dsa: felix: re-enable TAS guard band mode") Reported-by:Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by:
-
chen zhang authored
The variable "has_system_memory" is unused in function ‘adjust_memory_range_protection’, remove it. Signed-off-by:
chen zhang <chenzhang@kylinos.cn> Signed-off-by:
-
David Howells authored
When trying to get a file lock on an AFS file, the server may return UAEAGAIN to indicate that the lock is already held. This is currently translated by the default path to -EREMOTEIO. Translate it instead to -EAGAIN so that we know we can retry it. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Jeffrey E Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/Signed-off-by:
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix for now for the AMBA bus code from Isaac Manjarres" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9229/1: amba: Fix use-after-free in amba_read_periphid()
-
- 06 Sep, 2022 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs fixes from Gao Xiang: - Fix return codes in erofs_fscache_{meta_,}read_folio error paths - Fix potential wrong pcluster sizes for later non-4K lclusters - Fix in-memory pcluster use-after-free on UP platforms * tag 'erofs-for-6.0-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix pcluster use-after-free on UP platforms erofs: avoid the potentially wrong m_plen for big pcluster erofs: fix error return code in erofs_fscache_{meta_,}read_folio -
jerry.meng authored
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
jerry.meng <jerry-meng@foxmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.comSigned-off-by:
-
