- 19 Oct, 2018 40 commits
-
-
Josh Abraham authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 4dca864b ] This patch removes duplicate macro useage in events_base.c. It also fixes gcc warning: variable ‘col’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Joshua Abraham <j.abraham1776@gmail.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Olaf Hering authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 3366cdb6 ] The command 'xl vcpu-set 0 0', issued in dom0, will crash dom0: BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 65 Comm: xenwatch Not tainted 4.19.0-rc2-1.ga9462db-default #1 openSUSE Tumbleweed (unreleased) Hardware name: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010 RIP: e030:device_offline+0x9/0xb0 Code: 77 24 00 e9 ce fe ff ff 48 8b 13 e9 68 ff ff ff 48 8b 13 e9 29 ff ff ff 48 8b 13 e9 ea fe ff ff 90 66 66 66 66 90 41 54 55 53 <f6> 87 d8 02 00 00 01 0f 85 88 00 00 00 48 c7 c2 20 09 60 81 31 f6 RSP: e02b:ffffc90040f27e80 EFLAGS: 00010203 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8801f3800000 RSI: ffffc90040f27e70 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffff820e47b3 R09: 0000000000000000 R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff822e6d30 R13: dead000000000200 R14: dead000000000100 R15: ffffffff8158b4e0 FS: 00007ffa595158c0(0000) GS:ffff8801f39c0000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002d8 CR3: 00000001d9602000 CR4: 0000000000002660 Call Trace: handle_vcpu_hotplug_event+0xb5/0xc0 xenwatch_thread+0x80/0x140 ? wait_woken+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x3a/0x50 This happens because handle_vcpu_hotplug_event is called twice. In the first iteration cpu_present is still true, in the second iteration cpu_present is false which causes get_cpu_device to return NULL. In case of cpu#0, cpu_online is apparently always true. Fix this crash by checking if the cpu can be hotplugged, which is false for a cpu that was just removed. Also check if the cpu was actually offlined by device_remove, otherwise leave the cpu_present state as it is. Rearrange to code to do all work with device_hotplug_lock held. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Reviewed-by:
-
Vitaly Kuznetsov authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 87dffe86 ] When guest receives a sysrq request from the host it acknowledges it by writing '\0' to control/sysrq xenstore node. This, however, make xenstore watch fire again but xenbus_scanf() fails to parse empty value with "%c" format string: sysrq: SysRq : Emergency Sync Emergency Sync complete xen:manage: Error -34 reading sysrq code in control/sysrq Ignore -ERANGE the same way we already ignore -ENOENT, empty value in control/sysrq is totally legal. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 097f5863 ] We need to verify that the "data_offset" is within bounds. Reported-by:
Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0ac1487c ] For inbound data with an unsupported HW header format, only dump the actual HW header. We have no idea how much payload follows it, and what it contains. Worst case, we dump past the end of the Inbound Buffer and access whatever is located next in memory. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 6ad56901 ] After system suspend, sometimes the r8169 doesn't work when ethernet cable gets pluggued. This issue happens because rtl_reset_work() doesn't get called from rtl8169_runtime_resume(), after system suspend. In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is met: if (!netif_running(dev) || !test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags)) ... If RTL_FLAG_TASK_ENABLED was cleared during system suspend while RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't schedule task as the flag is still there. So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other flags. Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Miguel Ojeda authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 13aceef0 ] All other uses of "asm goto" go through asm_volatile_goto, which avoids a miscompile when using GCC < 4.8.2. Replace our open-coded "asm goto" statements with the asm_volatile_goto macro to avoid issues with older toolchains. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 5c41aaad ] Building drivers/mtd/nand/raw/nandsim.c on arch/hexagon/ produces a printk format build warning. This is due to hexagon's ffs() being coded as returning long instead of int. Fix the printk format warning by changing all of hexagon's ffs() and fls() functions to return int instead of long. The variables that they return are already int instead of long. This return type matches the return type in <asm-generic/bitops/>. ../drivers/mtd/nand/raw/nandsim.c: In function 'init_nandsim': ../drivers/mtd/nand/raw/nandsim.c:760:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long int' [-Wformat] There are no ffs() or fls() allmodconfig build errors after making this change. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Patch-mainline: linux-kernel @ 07/22/2018, 16:03 Signed-off-by:
Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 200f351e ] Fix build warning in arch/hexagon/kernel/dma.c by casting a void * to unsigned long to match the function parameter type. ../arch/hexagon/kernel/dma.c: In function 'arch_dma_alloc': ../arch/hexagon/kernel/dma.c:51:5: warning: passing argument 2 of 'gen_pool_add' makes integer from pointer without a cast [enabled by default] ../include/linux/genalloc.h:112:19: note: expected 'long unsigned int' but argument is of type 'void *' Signed-off-by:
-
Joe Thornber authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 3ab91828 ] Committing a transaction can consume some metadata of it's own, we now reserve a small amount of metadata to cover this. Free metadata reported by the kernel will not include this reserve. If any of the reserve has been used after a commit we enter a new internal state PM_OUT_OF_METADATA_SPACE. This is reported as PM_READ_ONLY, so no userland changes are needed. If the metadata device is resized the pool will move back to PM_WRITE. These changes mean we never need to abort and rollback a transaction due to running out of metadata space. This is particularly important because there have been a handful of reports of data corruption against DM thin-provisioning that can all be attributed to the thin-pool having ran out of metadata space. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Stephen Rothwell authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit bcfb84a9 ] A powerpc build of cifs with gcc v8.2.0 produces this warning: fs/cifs/cifssmb.c: In function ‘CIFSSMBNegotiate’: fs/cifs/cifssmb.c:605:3: warning: ‘strncpy’ writing 16 bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] strncpy(pSMB->DialectsArray+count, protocols[i].name, 16); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Since we are already doing a strlen() on the source, change the strncpy to a memcpy(). Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Ben Skeggs authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0a6986c6 ] This Falcon application doesn't appear to be present on some newer systems, so let's not fail init if we can't find it. TBD: is there a way to determine whether it *should* be there? Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ben Hutchings authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 14427b86 ] snprintf() always returns the full length of the string it could have printed, even if it was truncated because the buffer was too small. So in case the counter value is truncated, we will over-read from in_buffer and over-write to the caller's buffer. I don't think it's actually possible for this to happen, but in case truncation occurs, WARN and return -EIO. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0d23ba60 ] The current code grabs the private_data of whatever file descriptor userspace has supplied and implicitly casts it to a `struct ucma_file *`, potentially causing a type confusion. This is probably fine in practice because the pointer is only used for comparisons, it is never actually dereferenced; and even in the comparisons, it is unlikely that a file from another filesystem would have a ->private_data pointer that happens to also be valid in this context. But ->private_data is not always guaranteed to be a valid pointer to an object owned by the file's filesystem; for example, some filesystems just cram numbers in there. Check the type of the supplied file descriptor to be safe, analogous to how other places in the kernel do it. Fixes: 88314e4d ("RDMA/cma: add support for rdma_migrate_id()") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Sandipan Das authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit fa694160 ] This makes sure that the SyS symbols are ignored for any powerpc system, not just the big endian ones. Reported-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Reviewed-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Anton Vasilyev authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit c37bd528 ] There is no deallocation of fotg210->ep[i] elements, allocated at fotg210_udc_probe. The patch adds deallocation of fotg210->ep array elements and simplifies error path of fotg210_udc_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Daniel Black authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit d41aa525 upstream. Reproducer, assuming 2M of hugetlbfs available: Hugetlbfs mounted, size=2M and option user=testuser # mount | grep ^hugetlbfs hugetlbfs on /dev/hugepages type hugetlbfs (rw,pagesize=2M,user=dan) # sysctl vm.nr_hugepages=1 vm.nr_hugepages = 1 # grep Huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 1 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 2048 kB Code: #include <sys/mman.h> #include <stddef.h> #define SIZE 2*1024*1024 int main() { void *ptr; ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_HUGETLB | MAP_ANONYMOUS, -1, 0); madvise(ptr, SIZE, MADV_DONTDUMP); madvise(ptr, SIZE, MADV_DODUMP); } Compile and strace: mmap(NULL, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB, -1, 0) = 0x7ff7c9200000 madvise(0x7ff7c9200000, 2097152, MADV_DONTDUMP) = 0 madvise(0x7ff7c9200000, 2097152, MADV_DODUMP) = -1 EINVAL (Invalid argument) hugetlbfs pages have VM_DONTEXPAND in the VmFlags driver pages based on author testing with analysis from Florian Weimer[1]. The inclusion of VM_DONTEXPAND into the VM_SPECIAL defination was a consequence of the large useage of VM_DONTEXPAND in device drivers. A consequence of [2] is that VM_DONTEXPAND marked pages are unable to be marked DODUMP. A user could quite legitimately madvise(MADV_DONTDUMP) their hugetlbfs memory for a while and later request that madvise(MADV_DODUMP) on the same memory. We correct this omission by allowing madvice(MADV_DODUMP) on hugetlbfs pages. [1] https://stackoverflow.com/questions/52548260/madvisedodump-on-the-same-ptr-size-as-a-successful-madvisedontdump-fails-wit [2] commit 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Link: http://lkml.kernel.org/r/20180930054629.29150-1-daniel@linux.ibm.com Link: https://lists.launchpad.net/maria-discuss/msg05245.html Fixes: 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Reported-by:
Kenneth Penza <kpenza@gmail.com> Signed-off-by:
Daniel Black <daniel@linux.ibm.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Naoya Horiguchi authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 7ab660f8 ] debugfs_known_mountpoints[] is not used any more, so let's remove it. Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Naoya Horiguchi authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 90450656 ] Currently we get the following compiler warning: slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (s->object_size < min_objsize) ^ due to the mismatch of signed/unsigned comparison. ->object_size and ->slab_size are never expected to be negative, so let's define them as unsigned int. [n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative] Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
-
Emmanuel Grumbach authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit c6e57b38 ] When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with: WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211] Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ilan Peer authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0007e943 ] When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit f3ffb6c3 ] We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 8442938c ] The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we are truncating away the high bits. I noticed this bug because in commit 9cf0a0b4 ("cfg80211: Add support for 60GHz band channels 5 and 6") we made "freq <= 56160 + 2160 * 6" a valid requency when before it was only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static checker warning: net/wireless/util.c:1571 ieee80211_chandef_to_operating_class() warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)' But really we probably shouldn't have been truncating the high bits away to begin with. Signed-off-by:
-
Jon Kuhn authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit c15e3f19 ] When a Mac client saves an item containing a backslash to a file server the backslash is represented in the CIFS/SMB protocol as as U+F026. Before this change, listing a directory containing an item with a backslash in its name will return that item with the backslash represented with a true backslash character (U+005C) because convert_sfm_character mapped U+F026 to U+005C when interpretting the CIFS/SMB protocol response. However, attempting to open or stat the path using a true backslash will result in an error because convert_to_sfm_char does not map U+005C back to U+F026 causing the CIFS/SMB request to be made with the backslash represented as U+005C. This change simply prevents the U+F026 to U+005C conversion from happenning. This is analogous to how the code does not do any translation of UNI_SLASH (U+F000). Signed-off-by:
Jon Kuhn <jkuhn@barracuda.com> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 16fe10cf ] The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 4c85609b ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 38f5d8d8 ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: dd6fd4a3 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") Signed-off-by:
-
Xiao Ni authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 1d0ffd26 ] In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true. In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON. Add one pair of raise_barrier/lower_barrier to fix this bug. Signed-off-by:
Xiao Ni <xni@redhat.com> Suggested-by:
Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Arunk Khandavalli authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 4f0223bf ] nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with is_valid_ie_attr() before dereferencing it, but that helper function returns true in case of NULL pointer (i.e., attribute not included). This can result to dereferencing a NULL pointer. Fix that by explicitly checking that NL80211_ATTR_IE is included. Fixes: 355199e0 ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition") Signed-off-by:
Arunk Khandavalli <akhandav@codeaurora.org> Signed-off-by:
Jouni Malinen <jouni@codeaurora.org> Signed-off-by:
-
Yuan-Chi Pang authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 1f631c32 ] IEEE 802.11-2016 14.10.8.3 HWMP sequence numbering says: If it is a target mesh STA, it shall update its own HWMP SN to maximum (current HWMP SN, target HWMP SN in the PREQ element) + 1 immediately before it generates a PREP element in response to a PREQ element. Signed-off-by:
Yuan-Chi Pang <fu3mo6goo@gmail.com> Signed-off-by:
-
Michael Hennerich authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 6537886c ] This fixes: [BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug in adp5588_gpio_write() [BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug in adp5588_gpio_direction_input() Reported-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Danek Duvall authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit d7c863a2 ] The mac80211_hwsim driver intends to say that it supports up to four STBC receive streams, but instead it ends up saying something undefined. The IEEE80211_VHT_CAP_RXSTBC_X macros aren't independent bits that can be ORed together, but values. In this case, _4 is the appropriate one to use. Signed-off-by:
Danek Duvall <duvall@comfychair.org> Signed-off-by:
-
Danek Duvall authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 67d1ba8a ] The mod mask for VHT capabilities intends to say that you can override the number of STBC receive streams, and it does, but only by accident. The IEEE80211_VHT_CAP_RXSTBC_X aren't bits to be set, but values (albeit left-shifted). ORing the bits together gets the right answer, but we should use the _MASK macro here instead. Signed-off-by:
-
Paul Mackerras authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 46dec40f ] This fixes a bug which causes guest virtual addresses to get translated to guest real addresses incorrectly when the guest is using the HPT MMU and has more than 256GB of RAM, or more specifically has a HPT larger than 2GB. This has showed up in testing as a failure of the host to emulate doorbell instructions correctly on POWER9 for HPT guests with more than 256GB of RAM. The bug is that the HPTE index in kvmppc_mmu_book3s_64_hv_xlate() is stored as an int, and in forming the HPTE address, the index gets shifted left 4 bits as an int before being signed-extended to 64 bits. The simple fix is to make the variable a long int, matching the return type of kvmppc_hv_find_lock_hpte(), which is what calculates the index. Fixes: 697d3899 ("KVM: PPC: Implement MMIO emulation support for Book3S HV guests") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Sakari Ailus authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit ad608fbc upstream. The event subscriptions are added to the subscribed event list while holding a spinlock, but that lock is subsequently released while still accessing the subscription object. This makes it possible to unsubscribe the event --- and freeing the subscription object's memory --- while the subscription object is simultaneously accessed. Prevent this by adding a mutex to serialise the event subscription and unsubscription. This also gives a guarantee to the callback ops that the add op has returned before the del op is called. This change also results in making the elems field less special: subscriptions are only added to the event list once they are fully initialised. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for 4.14 and up Fixes: c3b5b024 ("V4L/DVB: V4L: Events: Add backend") Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Marc Zyngier authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit 2a3f9345 upstream. Not all execution modes are valid for a guest, and some of them depend on what the HW actually supports. Let's verify that what userspace provides is compatible with both the VM settings and the HW capabilities. Cc: <stable@vger.kernel.org> Fixes: 0d854a60 ("arm64: KVM: enable initialization of a 32bit vcpu") Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit 042446a3 upstream. Add cpu_hwcap bit for keeping track of the support for 32bit EL0. Tested-by:
Yury Norov <ynorov@caviumnetworks.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Mika Westerberg authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 7fd6d98b ] Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") made it possible for AML code to access SMBus I/O ports by installing custom SystemIO OpRegion handler and blocking i80i driver access upon first AML read/write to this OpRegion. However, while ThinkPad T560 does have SystemIO OpRegion declared under the SMBus device, it does not access any of the SMBus registers: Device (SMBU) { ... OperationRegion (SMBP, PCI_Config, 0x50, 0x04) Field (SMBP, DWordAcc, NoLock, Preserve) { , 5, TCOB, 11, Offset (0x04) } Name (TCBV, 0x00) Method (TCBS, 0, NotSerialized) { If ((TCBV == 0x00)) { TCBV = (\_SB.PCI0.SMBU.TCOB << 0x05) } Return (TCBV) /* \_SB_.PCI0.SMBU.TCBV */ } OperationRegion (TCBA, SystemIO, TCBS (), 0x10) Field (TCBA, ByteAcc, NoLock, Preserve) { Offset (0x04), , 9, CPSC, 1 } } Problem with the current approach is that it blocks all I/O port access and because this system has touchpad connected to the SMBus controller after first AML access (happens during suspend/resume cycle) the touchpad fails to work anymore. Fix this so that we allow ACPI AML I/O port access if it does not touch the region reserved for the SMBus. Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737Reported-by:
Yussuf Khalil <dev@pp3345.net> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit f196dec6 ] The adt7475_read_word() function was meant to return negative error codes on failure. Signed-off-by:
Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Lothar Felten authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 3ad86700 ] fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by:
Lothar Felten <lothar.felten@gmail.com> Signed-off-by:
-
