- 15 Jan, 2020 5 commits
-
-
Colin Ian King authored
Variable r is being initialized to zero, so the check of a non-zero rv is redundant and can be removed. It appears that the previous case statements set r to be -EINVAL and the "Fallthrough" comment afterwards suggested it was going to fall through to this non-zero check but won't because of the break statement. Remove the confusion by removing the Fallthrough comment too. Addresses-Coverity: ("Logically dead code") Fixes: b39a982d ("OMAP: DSS2: omapfb driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204152847.1435188-1-colin.king@canonical.com
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Signed-off-by:
-
Chuhong Yuan authored
The driver forgets to disable the regulator in remove like what is done in probe failure. Add the missed call to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Tested-by:
Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by:
-
Colin Ian King authored
There is a block of statements that are indented too deeply, remove the extraneous tabs. Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Cc: "K . Y . Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> [b.zolnierkie: minor patch summary fixup] Signed-off-by:
-
Dan Carpenter authored
The "fix" struct has a 2 byte hole after ->ywrapstep and the "fix = info->fix;" assignment doesn't necessarily clear it. It depends on the compiler. The solution is just to replace the assignment with an memcpy(). Fixes: 1f5e31d7 ("fbmem: don't call copy_from/to_user() with mutex held") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Peter Rosin <peda@axentia.se> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
- 14 Jan, 2020 1 commit
-
-
Daniel Stone authored
getfb2 allows us to pass multiple planes and modifiers, just like addfb2 over addfb. Changes since v2: - add privilege checks from getfb1 since handles should only be returned to master/root Changes since v1: - unused modifiers set to 0 instead of DRM_FORMAT_MOD_INVALID - update ioctl number Signed-off-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Juston Li <juston.li@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191217034642.3814-1-juston.li@intel.com
-
- 13 Jan, 2020 5 commits
-
-
Paul Cercueil authored
The FRD350H54004 is a simple 3.5" 320x240 24-bit TFT panel, found for instance inside the Anbernic RG-350 handheld gaming console. v2: Order alphabetically v3: Add connector_type, and update timings according to the constraints listed in the datasheet Signed-off-by:Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200113161741.32061-3-paul@crapouillou.net
-
Paul Cercueil authored
Add bindings documentation for the Frida 3.5" (320x240 pixels) 24-bit TFT LCD panel. v2: Switch documentation from plain text to YAML v3: Simply add new compatible to panel-simple.yaml file instead of adding new file Signed-off-by: -
Paul Cercueil authored
Add an entry for Shenzhen Frida LCD Co., Ltd. v2: No change v3: No change Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The Rockship DRM GEM code uses vmap()/vunmap() so vmalloc header must be included to avoid warnings like (on IA64, compile tested): drivers/gpu/drm/rockchip/rockchip_drm_gem.c: In function ‘rockchip_gem_alloc_iommu’: drivers/gpu/drm/rockchip/rockchip_drm_gem.c:134:20: error: implicit declaration of function ‘vmap’ [-Werror=implicit-function-declaration] Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1577779956-7612-1-git-send-email-krzk@kernel.org
-
Wambui Karuga authored
Replace the open coded calculation with the more concise and readable DIV_ROUND_UP macro. Signed-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by:
-
- 12 Jan, 2020 2 commits
-
-
Arnd Bergmann authored
Making this IS_REACHABLE() was still wrong, as that just determines whether the lower-level backlight code would be reachable from the panel driver. However, with CONFIG_DRM=y and CONFIG_BACKLIGHT_CLASS_DEVICE=m, the drm_panel_of_backlight is left out of drm_panel.o but the condition tells the driver that it is there, leading to multiple link errors such as ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-sitronix-st7701.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-sharp-ls043t1le01.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-seiko-43wvf1g.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-ronbo-rb070d30.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-rocktech-jh057n00900.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.ko] undefined! Change the condition to check for whether the function was actually part of the drm module. This version of the patch survived a few hundred randconfig builds, so I have a good feeling this might be the last one for the export. Fixes: 4a34a9dc ("drm/drm_panel: Fix EXPORT of drm_panel_of_backlight() one more time") Fixes: 907aa265 ("drm/drm_panel: fix EXPORT of drm_panel_of_backlight") Fixes: 152dbdea ("drm/panel: add backlight support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
With gcc -O3 in combination with the structleak plug, the compiler can inline very aggressively, leading to rather large stack usage: drivers/gpu/drm/panel/panel-tpo-td028ttec1.c: In function 'td028ttec1_prepare': drivers/gpu/drm/panel/panel-tpo-td028ttec1.c:233:1: error: the frame size of 2768 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] } Marking jbt_reg_write_*() as noinline avoids the case where multiple instances of this function get inlined into the same stack frame and each one adds a copy of 'tx_buf'. The compiler is clearly making some bad decisions here, but I did not open a new bug report as this only happens in combination with the structleak plugin. This fixes mmtom ("init/Kconfig: enable -O3 for all arches") Link: https://lore.kernel.org/lkml/CAK8P3a3jAnFZA3GFRtdYdg1-i-oih3pOQzkkrK-X3BGsFrMiZQ@mail.gmail.com/Signed-off-by:
-
- 11 Jan, 2020 2 commits
-
-
Hans de Goede authored
If the new video=... panel_orientation option is set for a connector, honor it and setup a matching "panel orientation" property on the connector. Changes in v2: -Improve DRM_INFO message to make it clear that the panel_orientation is being forced from the commandline BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200105155120.96466-2-hdegoede@redhat.com
-
Derek Basehore authored
Not every platform needs quirk detection for panel orientation, so split the drm_connector_init_panel_orientation_property into two functions. One for platforms without the need for quirks, and the other for platforms that need quirks. Hans de Goede (changes in v2): Rename the function from drm_connector_init_panel_orientation_property to drm_connector_set_panel_orientation[_with_quirk] and pass in the panel-orientation to set. Beside the rename, also make the function set the passed in value only once, if the value was set before (to a value other then DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op. This change is preparation for allowing the user to override the panel-orientation for any connector from the kernel commandline. When the panel-orientation is overridden this way, then we must ignore the panel-orientation detection done by the driver. Reviewed-by:
Derek Basehore <dbasehore@chromium.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200105155120.96466-1-hdegoede@redhat.com
-
- 10 Jan, 2020 2 commits
-
-
Oleg Vasilev authored
The helper should always be used. Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Signed-off-by:
Oleg Vasilev <oleg.vasilev@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
Oleg Vasilev authored
DP_MAX_DOWNSTREAM_PORTS=0x10 is a vendor-independent constant. Reviewed-by:
-
- 09 Jan, 2020 15 commits
-
-
Miquel Raynal authored
Add support for the Satoz SAT050AT40H12R2 panel. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Miquel Raynal authored
Satoz is a Chinese TFT manufacturer. Website: http://www.sat-sz.com/English/index.html Add the compatible for its SAT050AT40H12R2 5.0 inch LCD panel. Signed-off-by:
-
Maxime Ripard authored
The Allwinner SoCs have a display engine composed of several controllers assembled differently depending on the SoC, the number and type of output they have, and the additional features they provide. A number of those are supported in Linux, with the matching bindings. Now that we have the DT validation in place, let's split into separate file and convert the device tree bindings for those controllers to schemas. Reviewed-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200103152801.47254-1-maxime@cerno.tech
-
Benjamin Gaignard authored
Exported functions prototypes are missing in drm_fb_cma_helper.c Include drm_fb_cma_helper to fix that issue. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20191119105753.32363-1-benjamin.gaignard@st.com
-
Benjamin Gaignard authored
Some variables are set but never used. To avoid warning when compiling with W=1 and keep the algorithm like it is tag theses variables with _maybe_unused macro. Signed-off-by:
-
Tobias Schramm authored
This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple driver. The panel is used by the pine64 Pinebook Pro. Signed-off-by:
Tobias Schramm <t.schramm@manjaro.org> Signed-off-by:
-
Sam Ravnborg authored
Add bindings for the BOE NV140FHM-N49 14" 1920x1080 panel. The panel is used by the pine64 Pinebook Pro. Signed-off-by:
-
Linus Walleij authored
The Sony ACX424AKP is a command/videomode DSI panel for mobile devices. It is used on the ST-Ericsson HREF520 reference design. We support video mode by default, but it is possible to switch the panel into command mode by using the bool property "dsi-command-mode". Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Zimmermann authored
The udl driver for DisplayLink devices depends on support for host-side USB controllers, which is enabled with CONFIG_USB. Plain USB support as given by CONFIG_USB_SUPPORT is not sufficient. This patch changes dependencies for udl to depend on CONFIG_USB, instead of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a USB host controller. With this change udl dependencies work the same way as dependencies for PCI drivers. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200106141016.9562-1-tzimmermann@suse.de
-
Hans Verkuil authored
Add a missing 'depends on DRM' for the DRM_DP_CEC config option. Without that enabling DRM_DP_CEC will force CEC_CORE to =y instead of =m if DRM=m as well. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by:
-
Paul Cercueil authored
Add a compatible string for the Sharp LS020B1DD01D 2" HQVGA TFT LCD panel, and remove the old sharp,ls020b1dd01d.txt documentation which is now obsolete. Signed-off-by:
-
Paul Cercueil authored
Add a compatible string for the GiantPlus GPM740B0 3" QVGA TFT LCD panel, and remove the old giantplus,gpm740b0.txt documentation which is now obsolete. Signed-off-by:
-
Qiang Yu authored
drm_sched_job_timedout works with drm_sched_stop as a pair, so we'd better use the drm_sched_fault helper to make the error and timeout handling go the same path. This also fixes application hang when task error. Reviewed-by:
Vasily Khoruzhick <anarsoul@gmail.com> Tested-by:
Andreas Baierl <ichgeh@imkreisrum.de> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200101103831.22429-1-yuq825@gmail.com
-
Rob Clark authored
Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
- 08 Jan, 2020 8 commits
-
-
Miquel Raynal authored
Satoz is a Chinese TFT manufacturer. Website: http://www.sat-sz.com/English/index.htmlSigned-off-by:
-
Sam Ravnborg authored
There is an increasing number of new simple panels. Common for many of these simple panels are that they have one mandatory power-supply and some of them have backlight and / or an enable gpio. The binding file to describe these panels adds overhead that really do not add value. The binding are known and there is nothing gained from a dedicated binding file nor for any dedicated example. The following patch introduces a single panel-simple.yaml and converts two ampire bindings over to the new file. The conversion - if applied will have following effects: - The maintainer for the individual file will change There is no need for many different maintainers for a simple binding. We have the same situation with the panel-simple driver in the kernel. - The license will change to (GPL-2.0-only OR BSD-2-Clause) There is usually only a single line copied from the original file, a line that is often copied from a datasheet. This license change should be acceptable considered what little is copied. If the license change is not OK we can use a dedicated binding file in these cases. This is a follow-up on Rob's big patch converting a lot of panel bindings to individual files: "dt-bindings: display: Convert a bunch of panels to DT schema" https://patchwork.ozlabs.org/patch/1197683/ The objectives with one file for the relevant simple panels are: - Make it simpler to add bindings for simple panels - Keep the number of bindings file lower and thus easier to find a relevant file to copy from when adding new panels. - Keep the binding documentation for simple panels more consistent - Make it simpler to add support for new panels v3: - Whitespace fix (checkpatch) - Indent compatible (Rob h) - Indent comments to give compatible more visibility (Rob h) v2: - spelling fixes (imirkin via irc, Rob) - updated description (Rob) - list properires in alphabetical order - added power-supply to example (Rob) - updated title - reworded changelog a little Signed-off-by: -
Dan Carpenter authored
We moved this code to a different file and accidentally deleted a newline. Signed-off-by:
-
Wambui Karuga authored
Since the if statement only checks for the value of the `id` variable, it can be replaced by the more concise BUG_ON() macro for error reporting. Issue found using coccinelle. Signed-off-by:
-
Arnd Bergmann authored
Casting a pointer to dma_addr_t produces a warning: drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free': drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] priv->rdma.addr_phys = (dma_addr_t)NULL; In this case, it's worse because the variable name has the suffix '_phys', which often indicates a phys_addr_t rather than dma_addr_t, i.e. yet another incompatible type. Change it to use consistent naming and avoid NULL. Fixes: 63fba242 ("drm/meson: add RDMA module driver") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Chen Zhou authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/gma500/psb_irq.c: In function psb_irq_turn_off_dpst: drivers/gpu/drm/gma500/psb_irq.c:473:6: warning: variable hist_reg set but not used [-Wunused-but-set-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191227114811.14907-1-chenzhou10@huawei.com
-
Maxime Ripard authored
The DRC needs to run at 300MHz to be functional. This was done so far using assigned-clocks in the device tree, but that is easy to forget, and doesn't provide any other guarantee than the rate is going to be roughly the one requested at probe time. Therefore it's pretty fragile, so let's just use the exclusive clock API to enforce it. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Maxime Ripard authored
The backend needs to run at 300MHz to be functional. This was done so far using assigned-clocks in the device tree, but that is easy to forget, and doesn't provide any other guarantee than the rate is going to be roughly the one requested at probe time. Therefore it's pretty fragile, so let's just use the exclusive clock API to enforce it. Reviewed-by:
-
