Fixes this missed case:

xe 0000:00:02.0: [drm] Missing outer runtime PM protection
WARNING: CPU: 99 PID: 1455 at drivers/gpu/drm/xe/xe_pm.c:564 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Call Trace:
<TASK>
? show_regs+0x67/0x70
? __warn+0x94/0x1b0
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
? report_bug+0x1b7/0x1d0
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
xe_device_declare_wedged+0x91/0x280 [xe]
gt_reset_worker+0xa2/0x250 [xe]

v2: Also move get and get the right Fixes tag (Himal, Brost)

Fixes: fb74b205 ("drm/xe: Introduce a simple wedged state")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-1-rodrigo.vivi@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Since commit 178c0a33 ("drm/print: Add generic drm dev printk
function") the output from drm_WARN() includes previously missing
the [drm] tag, so now xe_assert() is printing it twice:

  [ ] xe 0000:00:02.0: [drm] [drm] Assertion `false` failed!
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902190726.1748-1-michal.wajdeczko@intel.com

As part of the VF config release, we should reset all parameters,
including thresholds, to always start with the clean VF config.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830132100.1704-3-michal.wajdeczko@intel.com

We are pushing threshold KLV to the GuC immediately during the
threshold provisioning, but those configs will be lost during a
GT reset.  Include threshold KLVs while encoding full VF config
buffer to make sure the GuC receives all of the config KLVs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830132100.1704-2-michal.wajdeczko@intel.com

Testing on LNL has shown media GT's TLBs need to be invalidated via the
GuC, update PT code appropriately.

v2:
 - Do dma_fence_get before first call of invalidation_fence_init (Himal)
 - No need to check for valid chain fence (Himal)
v3:
 - Use dma-fence-array

Fixes: 33303615 ("drm/xe/lnl: Add LNL platform definition")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170144.2492062-3-matthew.brost@intel.com

Useful to preallocate dma fence array and then arm in path of reclaim or
a dma fence.

v2:
 - s/arm/init (Christian)
 - Drop !array warn (Christian)
v3:
 - Fix kernel doc typos (dim)

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170144.2492062-2-matthew.brost@intel.com

There's only one instance of hwmon per device, and MMIO access to it is
always done through the root tile.  The code has been passing around a
pointer to the root tile's primary GT, which is confusing since this
isn't really a GT-level concept.  Replace that pointer with an xe_device
pointer and use xe_root_mmio_gt(xe) to get a pointer when we need to do
register MMIO.  This makes things easier to follow, and also cleans up
the code in preparation for a much larger MMIO register access overhaul
that's coming soon.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-6-matthew.d.roper@intel.com

There's only one instance of the pcode per tile, and for GT-related
accesses both the primary and media GT share the same register
interface.  Since Xe was using per-GT locking, the pcode mutex wasn't
actually protecting everything that it should since concurrent accesses
related to a tile's primary GT and media GT were possible.

Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-5-matthew.d.roper@intel.com

None of the Xe display files work directly with the GT or need anything
from xe_gt.h.  Drop the unnecessary include.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829230307.886233-2-matthew.d.roper@intel.com

Simplify memory unwinding on error also fixing current memory
leak that can happen on error.

v2: use devm_kcalloc(Matt A)

Fixes: 3338e4f9 ("drm/xe: Use topology to determine page fault queue size")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826162035.20462-1-nirmoy.das@intel.comSigned-off-by: Nirmoy Das <nirmoy.das@intel.com>

Our initial VF control implementation was focused on providing
a very minimal support for the VF_STATE_NOTIFY events just to
meet GuC requirements, without tracking a VF state or doing any
expected actions (like cleanup in case of the FLR notification).

Try to improve this by defining set of VF state machines, each
responsible for processing one activity (PAUSE, RESUME, STOP or
FLR). All required steps defined by the VF state machine are then
executed by the PF worker from the dedicated workqueue.

Any external requests or notifications simply try to transition
between the states to trigger a work and then wait for that work
to finish. Some predefined default timeouts are used to avoid
changing existing API calls, but it should be easy to extend the
control API to also accept specific timeout values.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-5-michal.wajdeczko@intel.com

It is unlikely that GuC will ever send a G2H notification with an
invalid VFID and it is currently harmless if that actually happen.
But in upcoming patches we will start using that VFID as an index
and we must be sure it is a valid to avoid a crash due to a buggy
firmware or a currupted G2H message.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-4-michal.wajdeczko@intel.com

Current formatting of "The VF FLR Flow with GuC" only looks fine,
but it will not render properly when included in htmldocs due to:

  WARNING: Block quote ends without a blank line; unexpected unindent.
  CRITICAL: Missing matching underline for section title overline.

Fix that by adding proper indent and using list markup.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-3-michal.wajdeczko@intel.com

On current platforms it is a PF driver responsibility to clear
some of the VF's resources during a VF FLR. Add simple function
that will clear configured VF resources (GGTT, LMEM). We will
start using this function soon.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-2-michal.wajdeczko@intel.com

Due to the special handling of the GSCCS in HW, we can't escalate to GT
reset when we receive the reset failure interrupt; the specs indicate
that we should trigger an FLR instead, but we do not have support for
that at the moment, so the HW will stay permanently in a broken state.
We should therefore mark the device as wedged, the same as if the GT
reset had failed.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828221457.2752868-1-daniele.ceraolospurio@intel.com

This is useful for debug, in case something goes wrong with the GSC. The
info includes the version information and the current value of the HECI1
status registers.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-5-daniele.ceraolospurio@intel.com

The GSC compatibility version number is reset for each new platform. To
indicate this, the version includes a number that identifies the
platform (102 = MTL, 104 = LNL); this matches what happens for the
release version, where the major number also identifies a platform.

To make it clearer in our logs that the compatibility version is
specific to the platform, it is useful to include this platform number.
However, given that our binary names already include the platform, it is
not necessary to add this extra number there.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-4-daniele.ceraolospurio@intel.com

We set the FW status to "TRANSFERRED" after the load completes and to
"RUNNING"once we're done with proxy init, so do the same if we're trying
to re-load the FW and it is already loaded.

Note that there is no difference in driver behavior between the 2
states, but it's useful to be accurate when we dump the status for
debug.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-3-daniele.ceraolospurio@intel.com

The GSC HW is only reset by driver FLR or D3cold entry. We don't support
the former at runtime, while the latter is only supported on DGFX, for
which we don't support GSC. Therefore, if GSC failed to load previously
there is no need to try again because the HW is stuck in the error state.

An assert has been added so that if we ever add DGFX support we'll know
we need to handle the D3 case.

v2: use "< 0" instead of "!= 0" in the FW state error check (Julia).

Fixes: dd0e89e5 ("drm/xe/gsc: GSC FW load")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-2-daniele.ceraolospurio@intel.com

include/drm/xe_drm.h does not exist. Prefer the explicit uapi include.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827091539.4136838-1-jani.nikula@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

WRITE_I1 sub-command of the POWER_SETUP pcode command accepts a u16
parameter instead of u32. This change prevents potential illegal
sub-command errors.

v2: Mask uval instead of changing the prototype. (Badal)

v3: Rephrase commit message. (Badal)
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a42 ("drm/xe/hwmon: Expose card reactive critical power")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827155301.183383-1-karthik.poosa@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The kernel lrc is used solely by the execlist infra.
Move it to the execlist port struct and initialize it only when
execlists are used.

v2: Rebase, improve error handling readability (Jonathan)
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826100655.1719060-1-ilia.levi@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Battlemage platform is sufficiently tested and found stable. CI is also
pretty stable. Remove the force_probe requirement to enable the platform
support by default.

Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828082152.3194814-1-balasubramani.vivekanandan@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Make sure that ggtt_node_remove() is invoked only if both node and ggtt
are not null. Move the null checks to the caller function
xe_ggtt_node_remove().

v2: Move null check below declarations (Tejas)

Fixes: 919bb54e ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828092229.3606503-1-himal.prasad.ghimiray@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

For non-d3cold-capable devices we'd like to be able to wake up the
device from reclaim. In particular, for Lunar Lake we'd like to be
able to blit CCS metadata to system at shrink time; at least from
kswapd where it's reasonable OK to wait for rpm resume and a
preceding rpm suspend.

Therefore use a separate lockdep map for such devices and prime it
reclaim-tainted.

v2:
- Rename lockmap acquire- and release functions. (Rodrigo Vivi).
- Reinstate the old xe_pm_runtime_lockdep_prime() function and
  rename it to xe_rpm_might_enter_cb(). (Matthew Auld).
- Introduce a separate xe_pm_runtime_lockdep_prime function
  called from module init for known required locking orders.
v3:
- Actually hook up the prime function at module init.
v4:
- Rebase.
v5:
- Don't use reclaim-safe RPM with sriov.

Cc: "Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Cc: "Auld, Matthew" <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826143450.92511-1-thomas.hellstrom@linux.intel.com

Remove TTM_TT_FLAG_CLEARED_ON_FREE now that XE stopped using this
flag.

This reverts commit decbfaf0.

Cc: Christian König <christian.koenig@amd.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828083635.23601-2-nirmoy.das@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

This optimization relied on having to clear CCS on allocations.
If there is no need to clear CCS on allocations then this would mostly
help in reducing CPU utilization.

Revert this patch at this moment because of:
1 Currently Xe can't do clear on free and using a invalid ttm flag,
TTM_TT_FLAG_CLEARED_ON_FREE which could poison global ttm pool on
multi-device setup.

2 Also for LNL CPU:WB doesn't require clearing CCS as such BO will
not be allowed to bind with compression PTE. Subsequent patch will
disable clearing CCS for CPU:WB BOs for LNL.

This reverts commit 23683061.

Cc: Christian König <christian.koenig@amd.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828083635.23601-1-nirmoy.das@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Setting 'nomodeset' on the kernel command line disables all graphics
drivers with modesetting capabilities, leaving only firmware drivers,
such as simpledrm or efifb.

Most DRM drivers automatically support 'nomodeset' via DRM's module
helper macros. In xe, which uses regular module_init(), manually call
drm_firmware_drivers_only() to test for 'nomodeset'. Do not register
the driver if set.

v2:
- use xe's init table (Lucas)
- do NULL test for init/exit functions
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827121003.97429-1-tzimmermann@suse.deSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

dma_fence_chain_free() can handle NULL input, there is no need for NULL
check by caller.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-3-himal.prasad.ghimiray@intel.comSigned-off-by: Nirmoy Das <nirmoy.das@intel.com>

dma_fence_put() and dma_fence_chain_free() can handle NULL input,
there is no need for NULL check by caller.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-2-himal.prasad.ghimiray@intel.comSigned-off-by: Nirmoy Das <nirmoy.das@intel.com>

drm_sched_job_add_dependency() drops references even in case of error,
no need for caller to call dma_fence_put.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-1-himal.prasad.ghimiray@intel.comSigned-off-by: Nirmoy Das <nirmoy.das@intel.com>

Lunar Lake has been usable for a while in a desktop setup. Bugs are
sporadically showing up in CI, but being promptly fixed. Nothing very
concerning.

All the uapi changes related to fundamental platform usage have been
finalized.

Remove the force_probe requirement and enable the platform by default.

Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822224615.793540-1-lucas.demarchi@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

- lrc->bo NULL check is not needed in xe_lrc_snapshot_capture() as
  its already been taken care of in xe_lrc_init().
Signed-off-by: Apoorva Singh <apoorva.singh@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816080355.897256-1-apoorva.singh@intel.comSigned-off-by: Nirmoy Das <nirmoy.das@intel.com>

Clang warns (or errors with CONFIG_DRM_WERROR or CONFIG_WERROR):

  drivers/gpu/drm/xe/xe_ggtt.c:810:3: error: variable 'total' is uninitialized when used here [-Werror,-Wuninitialized]
    810 |                 total += hole_size;
        |                 ^~~~~
  drivers/gpu/drm/xe/xe_ggtt.c:798:11: note: initialize the variable 'total' to silence this warning
    798 |         u64 total;
        |                  ^
        |                   = 0
  1 error generated.

Move the zero initialization of total from
xe_gt_sriov_pf_config_print_available_ggtt() to xe_ggtt_print_holes() to
resolve the warning.

Fixes: 13636729 ("drm/xe: Introduce xe_ggtt_print_holes")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823-drm-xe-fix-total-in-xe_ggtt_print_holes-v1-1-12b02d079327@kernel.orgSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

In XE, display runtime suspend / resume routines are called only
if d3cold is allowed. This makes the driver unable to detect any
HPDs once the device goes into runtime suspend state in platforms
like LNL. Update the display runtime suspend / resume routines
to include HPD polling regardless of d3cold status.

While xe_display_pm_suspend/resume() performs steps during runtime
suspend/resume that shouldn't happen, like suspending MST and they
are missing other steps like enabling DC9, this patchset is meant
to keep the current behavior wrt. these, leaving the corresponding
updates for a follow-up

v2: have a separate function for display runtime s/r (Rodrigo)

v3: better streamlining of system s/r and runtime s/r calls (Imre)

v4: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-4-vinod.govindapillai@intel.com

This is a preparation for the follow-up patch where polling
will be handled properly for all cases during runtime suspend/resume.

v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-3-vinod.govindapillai@intel.com

Enable/Disable user access only during system suspend/resume.
This should not happen during runtime s/r

v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-2-vinod.govindapillai@intel.com

Preferred way to create kernel BOs is xe_managed_bo_create_pin_map, use
it.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820172958.1095143-7-matthew.brost@intel.com

Kernel BOs are destroyed with GGTT mappings, this is hardware
interaction so use devm.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820172958.1095143-5-matthew.brost@intel.com

Not a big deal if CT is down as driver is unloading, no need to warn.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820172958.1095143-4-matthew.brost@intel.com