Pull USB fixes from Greg KH:
 "Here are some USB driver fixes for 4.3-rc3.

  There's the usual assortment of new device ids, combined with xhci and
  gadget driver fixes.  Full details in the shortlog.  All of these have
  been in linux-next with no reported problems"

* tag 'usb-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits)
  MAINTAINERS: remove amd5536udc USB gadget driver maintainer
  USB: whiteheat: fix potential null-deref at probe
  xhci: init command timeout timer earlier to avoid deleting it uninitialized
  xhci: change xhci 1.0 only restrictions to support xhci 1.1
  usb: xhci: exit early in xhci_setup_device() if we're halted or dying
  usb: xhci: stop everything on the first call to xhci_stop
  usb: xhci: Clear XHCI_STATE_DYING on start
  usb: xhci: lock mutex on xhci_stop
  xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PM
  xhci: give command abortion one more chance before killing xhci
  usb: Use the USB_SS_MULT() macro to get the burst multiplier.
  usb: dwc3: gadget: Fix BUG in RT config
  usb: musb: fix cppi channel teardown for isoch transfer
  usb: phy: isp1301: Export I2C module alias information
  usb: gadget: drop null test before destroy functions
  usb: gadget: dummy_hcd: in transfer(), return data sent, not limit
  usb: gadget: dummy_hcd: fix rescan logic for transfer
  usb: gadget: dummy_hcd: fix unneeded else-if condition
  usb: gadget: dummy_hcd: emulate sending zlp in packet logic
  usb: musb: dsps: fix polling in device-only mode
  ...

Pull serial driver fix from Greg KH:
 "Here is one serial driver fix for 4.3-rc3 that resolves a module
  loading issue due to splitting up of the 8250 driver into smaller
  pieces.  It's been in linux-next with no reported problems"

* tag 'tty-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: Add missing module license for 8250_base.ko

Pull staging driver fixes from Greg KH:
 "Here are some tiny staging driver and documentation fixes for 4.3-rc3.

  All of these resolve reported issues that people have found and have
  been in the linux-next tree for a while with no problems"

* tag 'staging-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: Update email address for Martyn Welch
  staging: ion: fix corruption of ion_import_dma_buf
  staging: dgap: Remove myself from the MAINTAINERS file
  staging: most: Add dependency to HAS_IOMEM
  staging: unisys: remove reference of visorutil
  staging: unisys: visornic: handle error return from device registration
  staging: unisys: stop device registration before visorbus registration
  staging: unisys: visorbus: Unregister driver on error
  staging: unisys: visornic: Fix receive bytes statistics
  staging: unisys: unregister netdev when create debugfs fails
  staging: fbtft: replace master->setup() with spi_setup()
  staging: fbtft: fix 9-bit SPI support detection
  staging/lustre: change Lustre URLs and mailing list
  staging/android: Update ION TODO per LPC discussion
  Staging: most: MOST and MOSTCORE should depend on HAS_DMA
  staging: most: fix HDM_USB dependencies and build errors

Pull driver core fix from Greg KH:
 "Here is one driver core fix for 4.3-rc3 that resolves a reported oops"

* tag 'driver-core-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  cpu/cacheinfo: Fix teardown path

Pull char/misc driver fixes from Greg KH:
 "Here's some tiny char and misc driver fixes that resolve some reported
  errors for 4.3-rc3.

  All of these have been in linux-next with no problems for a while"

* tag 'char-misc-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  extcon: Fix attached value returned by is_extcon_changed
  Drivers: hv: vmbus: fix init_vp_index() for reloading hv_netvsc
  mei: fix debugfs files leak on error path
  thunderbolt: Allow loading of module on recent Apple MacBooks with thunderbolt 2 controller

Pull networking fixes from David Miller:

 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs
    instead of cloning them.  From Daniel Borkmann.

 2) When converting classical BPF into eBPF, fix the setting of the
    source reg to BPF_REG_X.  From Tycho Andersen.

 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from
    Linus Lussing.

 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau.

 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from
    Roopa Prabhu.

 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai.

 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from
    Florian Westphal.

 8) Check DMA mapping errors in bna driver, from Ivan Vecera.

 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context,
    misclearing of interrupt status in TX timeout handler, etc.) from
    David Woodhouse.

10) In tipc, reset SKB header pointer after skb_linearize(), from Erik
    Hugne.

11) Fix autobind races et al. in netlink code, from Herbert Xu with
    help from Tejun Heo and others.

12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan.

13) Fix various races in timewait timer and reqsk_queue_hadh_req, from
    Eric Dumazet.

14) Fix array overruns in mac80211, from Johannes Berg and Dan
    Carpenter.

15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov.

16) Fix race between poll_one_napi and napi_disable, from Neil Horman.

17) Fix byte order in geneve tunnel port config, from John W Linville.

18) Fix handling of ARP replies over lightweight tunnels, from Jiri
    Benc.

19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson
    Kok and Roopa Prabhu.

20) Several reference count handling bug fixes in the PHY/MDIO layer
    from Russel King.

21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault.

22) Fix crash in icmp_route_lookup(), from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net: Fix panic in icmp_route_lookup
  net: update docbook comment for __mdiobus_register()
  ppp: fix lockdep splat in ppp_dev_uninit()
  net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected
  phy: marvell: add link partner advertised modes
  net: fix net_device refcounting
  phy: add phy_device_remove()
  phy: fixed-phy: properly validate phy in fixed_phy_update_state()
  net: fix phy refcounting in a bunch of drivers
  of_mdio: fix MDIO phy device refcounting
  phy: add proper phy struct device refcounting
  phy: fix mdiobus module safety
  net: dsa: fix of_mdio_find_bus() device refcount leak
  phy: fix of_mdio_find_bus() device refcount leak
  ip6_tunnel: Reduce log level in ip6_tnl_err() to debug
  ip6_gre: Reduce log level in ip6gre_err() to debug
  fib_rules: fix fib rule dumps across multiple skbs
  bnx2x: byte swap rss_key to comply to Toeplitz specs
  net: revert "net_sched: move tp->root allocation into fw_init()"
  lwtunnel: remove source and destination UDP port config option
  ...

Andrey reported a panic:

[ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4
[ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320
[ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000
[ 7249.865637] Oops: 0000 [#1]
...
[ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.3.0-999-generic #201509220155
[ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014  08/02/2006
[ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000
[ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0
[ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320
[ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00
[ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974
[ 7249.867077]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0
[ 7249.867141] Stack:
[ 7249.867165]  320310ee 00000000 00000042 320310ee 00000000 c1aeca00
f3920240 f0c69180
[ 7249.867268]  f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000
e659266c f483ba54
[ 7249.867361]  8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0
c16b0e00 00000064
[ 7249.867448] Call Trace:
[ 7249.867494]  [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e]
[ 7249.867534]  [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack]
[ 7249.867576]  [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack]
[ 7249.867615]  [<c16b0e00>] ? icmp_send+0xa0/0x380
[ 7249.867648]  [<c16b102f>] icmp_send+0x2cf/0x380
[ 7249.867681]  [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4]
[ 7249.867714]  [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT]
[ 7249.867746]  [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables]
[ 7249.867780]  [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0
[nf_conntrack]
[ 7249.867838]  [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack]
[ 7249.867889]  [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter]
[ 7249.867933]  [<c16776a1>] nf_iterate+0x71/0x80
[ 7249.867970]  [<c1677715>] nf_hook_slow+0x65/0xc0
[ 7249.868002]  [<c1681811>] __ip_local_out_sk+0xc1/0xd0
[ 7249.868034]  [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0
[ 7249.868066]  [<c1681836>] ip_local_out_sk+0x16/0x30
[ 7249.868097]  [<c1684054>] ip_send_skb+0x14/0x80
[ 7249.868129]  [<c16840f4>] ip_push_pending_frames+0x34/0x40
[ 7249.868163]  [<c16844a2>] ip_send_unicast_reply+0x282/0x310
[ 7249.868196]  [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380
[ 7249.868227]  [<c16a1b63>] tcp_v4_rcv+0x323/0x990
[ 7249.868257]  [<c16776a1>] ? nf_iterate+0x71/0x80
[ 7249.868289]  [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230
[ 7249.868322]  [<c167df4c>] ip_local_deliver+0x4c/0xa0
[ 7249.868353]  [<c167dba0>] ? ip_rcv_finish+0x390/0x390
[ 7249.868384]  [<c167d88c>] ip_rcv_finish+0x7c/0x390
[ 7249.868415]  [<c167e280>] ip_rcv+0x2e0/0x420
...

Prior to the VRF change the oif was not set in the flow struct, so the
VRF support should really have only added the vrf_master_ifindex lookup.

Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX")
Cc: Andrey Melnikov <temnota.am@gmail.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the docbook comment for __mdiobus_register() to include the new
module owner argument.  This resolves a warning found by the 0-day
builder.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas can no longer work on the driver, so he asked me to mark the
MAINTAINER entry as "Orphan" with the hope that someone else would
someday pick it up.

Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull another cgroup fix from Tejun Heo:
 "The cgroup writeback support got inadvertently enabled for traditional
  hierarchies revealing two regressions which are currently being worked
  on.  It shouldn't have been enabled on traditional hierarchies, so
  disable it on them.  This is enough to make the regressions go away
  for people who aren't experimenting with cgroup"

* 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup, writeback: don't enable cgroup writeback on traditional hierarchies

ppp_dev_uninit() locks all_ppp_mutex while under rtnl mutex protection.
ppp_create_interface() must then lock these mutexes in that same order
to avoid possible deadlock.

[  120.880011] ======================================================
[  120.880011] [ INFO: possible circular locking dependency detected ]
[  120.880011] 4.2.0 #1 Not tainted
[  120.880011] -------------------------------------------------------
[  120.880011] ppp-apitest/15827 is trying to acquire lock:
[  120.880011]  (&pn->all_ppp_mutex){+.+.+.}, at: [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic]
[  120.880011]
[  120.880011] but task is already holding lock:
[  120.880011]  (rtnl_mutex){+.+.+.}, at: [<ffffffff812e4255>] rtnl_lock+0x12/0x14
[  120.880011]
[  120.880011] which lock already depends on the new lock.
[  120.880011]
[  120.880011]
[  120.880011] the existing dependency chain (in reverse order) is:
[  120.880011]
[  120.880011] -> #1 (rtnl_mutex){+.+.+.}:
[  120.880011]        [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e
[  120.880011]        [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341
[  120.880011]        [<ffffffff812e4255>] rtnl_lock+0x12/0x14
[  120.880011]        [<ffffffff812d9d94>] register_netdev+0x11/0x27
[  120.880011]        [<ffffffffa0147b17>] ppp_ioctl+0x289/0xc98 [ppp_generic]
[  120.880011]        [<ffffffff8113b367>] do_vfs_ioctl+0x4ea/0x532
[  120.880011]        [<ffffffff8113b3fd>] SyS_ioctl+0x4e/0x7d
[  120.880011]        [<ffffffff813ad7d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[  120.880011]
[  120.880011] -> #0 (&pn->all_ppp_mutex){+.+.+.}:
[  120.880011]        [<ffffffff8107334e>] __lock_acquire+0xb07/0xe76
[  120.880011]        [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e
[  120.880011]        [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341
[  120.880011]        [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic]
[  120.880011]        [<ffffffff812d5263>] rollback_registered_many+0x19e/0x252
[  120.880011]        [<ffffffff812d5381>] rollback_registered+0x29/0x38
[  120.880011]        [<ffffffff812d53fa>] unregister_netdevice_queue+0x6a/0x77
[  120.880011]        [<ffffffffa0146a94>] ppp_release+0x42/0x79 [ppp_generic]
[  120.880011]        [<ffffffff8112d9f6>] __fput+0xec/0x192
[  120.880011]        [<ffffffff8112dacc>] ____fput+0x9/0xb
[  120.880011]        [<ffffffff8105447a>] task_work_run+0x66/0x80
[  120.880011]        [<ffffffff81001801>] prepare_exit_to_usermode+0x8c/0xa7
[  120.880011]        [<ffffffff81001900>] syscall_return_slowpath+0xe4/0x104
[  120.880011]        [<ffffffff813ad931>] int_ret_from_sys_call+0x25/0x9f
[  120.880011]
[  120.880011] other info that might help us debug this:
[  120.880011]
[  120.880011]  Possible unsafe locking scenario:
[  120.880011]
[  120.880011]        CPU0                    CPU1
[  120.880011]        ----                    ----
[  120.880011]   lock(rtnl_mutex);
[  120.880011]                                lock(&pn->all_ppp_mutex);
[  120.880011]                                lock(rtnl_mutex);
[  120.880011]   lock(&pn->all_ppp_mutex);
[  120.880011]
[  120.880011]  *** DEADLOCK ***

Fixes: 8cb775bc ("ppp: fix device unregistration upon netns deletion")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The builds of allmodconfig of avr32 is failing with:

drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration
of function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration
of function 'pci_iounmap' [-Werror=implicit-function-declaration]

The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI
is not defined and CONFIG_GENERIC_PCI_IOMAP is defined.

Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are
getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both
are not defined.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Read the standard link partner advertisment registers and store it in
phydev->lp_advertising, so ethtool can report this information to
userspace via ethtool.  Zero it as per genphy if autonegotiation is
disabled.  Tested with a Marvell 88E1512 PHY.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull btrfs fixes from Chris Mason:
 "This is an assorted set I've been queuing up:

  Jeff Mahoney tracked down a tricky one where we ended up starting IO
  on the wrong mapping for special files in btrfs_evict_inode.  A few
  people reported this one on the list.

  Filipe found (and provided a test for) a difficult bug in reading
  compressed extents, and Josef fixed up some quota record keeping with
  snapshot deletion.  Chandan killed off an accounting bug during DIO
  that lead to WARN_ONs as we freed inodes"

* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: keep dropped roots in cache until transaction commit
  Btrfs: Direct I/O: Fix space accounting
  btrfs: skip waiting on ordered range for special files
  Btrfs: fix read corruption of compressed and shared extents
  Btrfs: remove unnecessary locking of cleaner_mutex to avoid deadlock
  Btrfs: don't initialize a space info as full to prevent ENOSPC

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable patches:
   - fix v4.2 SEEK on files over 2 gigs
   - Fix a layout segment reference leak when pNFS I/O falls back to inband I/O.
   - Fix recovery of recalled read delegations

  Bugfixes:
   - Fix a case where NFSv4 fails to send CLOSE after a server reboot
   - Fix sunrpc to wait for connections to complete before retrying
   - Fix sunrpc races between transport connect/disconnect and shutdown
   - Fix an infinite loop when layoutget fail with BAD_STATEID
   - nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
   - Fix a bogus WARN_ON_ONCE() in O_DIRECT when layout commit_through_mds is set
   - Fix layoutreturn/close ordering issues"

* tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS41: make close wait for layoutreturn
  NFS: Skip checking ds_cinfo.buckets when lseg's commit_through_mds is set
  NFSv4.x/pnfs: Don't try to recover stateids twice in layoutget
  NFSv4: Recovery of recalled read delegations is broken
  NFS: Fix an infinite loop when layoutget fail with BAD_STATEID
  NFS: Do cleanup before resetting pageio read/write to mds
  SUNRPC: xs_sock_mark_closed() does not need to trigger socket autoclose
  SUNRPC: Lock the transport layer on shutdown
  nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
  SUNRPC: Ensure that we wait for connections to complete before retrying
  SUNRPC: drop null test before destroy functions
  nfs: fix v4.2 SEEK on files over 2 gigs
  SUNRPC: Fix races between socket connection and destroy code
  nfs: fix pg_test page count calculation
  Failing to send a CLOSE if file is opened WRONLY and server reboots on a 4.x mount

Pull sound fixes from Takashi Iwai:
 "This ended up with a larger set of fixes than wished, unfortunately.

  As diffstat shows, the majority of changes are for various ASoC
  drivers (Realtek, Wolfson codec drivers, etc), in addition to a couple
  of HD-audio regression fixes.  All these are reasonably small and
  nothing to scare much"

* tag 'sound-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
  ALSA: hda - Disable power_save_node for Thinkpads
  ALSA: hda/tegra - async probe for avoiding module loading deadlock
  ASoC: rt5645: Prevent the pop sound in case of playback and the jack is plugging
  ASoC: rt5645: Increase the delay time to remove the pop sound
  ASoC: rt5645: Use the type SOC_DAPM_SINGLE_AUTODISABLE to prevent the weird sound in runtime of power up
  ASoC: pxa: pxa2xx-ac97: fix dma requestor lines
  MAINTAINERS: Update website and git repo for Wolfson Microelectronics
  ASoC: fsl_ssi: Fix checking of dai format for AC97 mode
  ASoC: wm0010: fix error path
  ASoC: wm0010: fix memory leak
  ASoC: wm8960: correct the max register value of mic boost pga
  ASoC: wm8962: remove 64k sample rate support
  ASoC: davinci-mcasp: Fix devm_kasprintf format string
  ASoC: fix broken pxa SoC support
  ASoC: davinci-mcasp: Set .symmetric_rates = 1 in snd_soc_dai_driver
  ASoC: au1x: psc-i2s: Fix unused variable 'ret' warning
  ASoC: SPEAr: Make SND_SPEAR_SOC select SND_SOC_GENERIC_DMAENGINE_PCM
  ASoC: mediatek: Increase periods_min in capture
  ASoC: davinci-mcasp: Revise the FIFO threshold calculation
  ASoC: wm8960: correct gain value for input PGA and add microphone PGA
  ...

Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge
  window management), and a new Renesas R8A7794 SoC device ID.

  Details:

  Resource management:
   - Revert pci_read_bridge_bases() unification (Bjorn Helgaas)
   - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn
     Helgaas)

  MSI:
   - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson)

  Renesas R-Car host bridge driver:
   - Add R8A7794 support (Sergei Shtylyov)

  Miscellaneous:
   - Fix devfn for VPD access through function 0 (Alex Williamson)
   - Use function 0 VPD only for identical functions (Alex Williamson)"

* tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: rcar: Add R8A7794 support
  PCI: Use function 0 VPD for identical functions, regular VPD for others
  PCI: Fix devfn for VPD access through function 0
  PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses
  PCI: Clear IORESOURCE_UNSET when clipping a bridge window
  PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"

Pull KVM fixes from Paolo Bonzini:
 "AMD fixes for bugs introduced in the 4.2 merge window, and a few PPC
  bug fixes too"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: disable halt_poll_ns as default for s390x
  KVM: x86: fix off-by-one in reserved bits check
  KVM: x86: use correct page table format to check nested page table reserved bits
  KVM: svm: do not call kvm_set_cr0 from init_vmcb
  KVM: x86: trap AMD MSRs for the TSeg base and mask
  KVM: PPC: Book3S: Take the kvm->srcu lock in kvmppc_h_logical_ci_load/store()
  KVM: PPC: Book3S HV: Pass the correct trap argument to kvmhv_commence_exit
  KVM: PPC: Book3S HV: Fix handling of interrupted VCPUs
  kvm: svm: reset mmu on VCPU reset

Pull powerpc fixes from Michael Ellerman:
 - Wire up sys_membarrier()
 - cxl: Fix lockdep warning while creating afu_err_buff from Vaibhav

* tag 'powerpc-4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  cxl: Fix lockdep warning while creating afu_err_buff attribute
  powerpc: Wire up sys_membarrier()

We observed some performance degradation on s390x with dynamic
halt polling. Until we can provide a proper fix, let's enable
halt_poll_ns as default only for supported architectures.

Architectures are now free to set their own halt_poll_ns
default value.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

29ecd660 ("KVM: x86: avoid uninitialized variable warning",
2015-09-06) introduced a not-so-subtle problem, which probably
escaped review because it was not part of the patch context.

Before the patch, leaf was always equal to iterator.level.  After,
it is equal to iterator.level - 1 in the call to is_shadow_zero_bits_set,
and when is_shadow_zero_bits_set does another "-1" the check on
reserved bits becomes incorrect.  Using "iterator.level" in the call
fixes this call trace:

WARNING: CPU: 2 PID: 17000 at arch/x86/kvm/mmu.c:3385 handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]()
Modules linked in: tun sha256_ssse3 sha256_generic drbg binfmt_misc ipv6 vfat fat fuse dm_crypt dm_mod kvm_amd kvm crc32_pclmul aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd fam15h_power amd64_edac_mod k10temp edac_core amdkfd amd_iommu_v2 radeon acpi_cpufreq
[...]
Call Trace:
  dump_stack+0x4e/0x84
  warn_slowpath_common+0x95/0xe0
  warn_slowpath_null+0x1a/0x20
  handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]
  tdp_page_fault+0x231/0x290 [kvm]
  ? emulator_pio_in_out+0x6e/0xf0 [kvm]
  kvm_mmu_page_fault+0x36/0x240 [kvm]
  ? svm_set_cr0+0x95/0xc0 [kvm_amd]
  pf_interception+0xde/0x1d0 [kvm_amd]
  handle_exit+0x181/0xa70 [kvm_amd]
  ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
  kvm_arch_vcpu_ioctl_run+0x6f6/0x1730 [kvm]
  ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
  ? preempt_count_sub+0x9b/0xf0
  ? mutex_lock_killable_nested+0x26f/0x490
  ? preempt_count_sub+0x9b/0xf0
  kvm_vcpu_ioctl+0x358/0x710 [kvm]
  ? __fget+0x5/0x210
  ? __fget+0x101/0x210
  do_vfs_ioctl+0x2f4/0x560
  ? __fget_light+0x29/0x90
  SyS_ioctl+0x4c/0x90
  entry_SYSCALL_64_fastpath+0x16/0x73
---[ end trace 37901c8686d84de6 ]---
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Intel CPUID on AMD host or vice versa is a weird case, but it can
happen.  Handle it by checking the host CPU vendor instead of the
guest's in reset_tdp_shadow_zero_bits_mask.  For speed, the
check uses the fact that Intel EPT has an X (executable) bit while
AMD NPT has NX.
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_set_cr0 may want to call kvm_zap_gfn_range and thus access the
memslots array (SRCU protected).  Using a mini SRCU critical section
is ugly, and adding it to kvm_arch_vcpu_create doesn't work because
the VMX vcpu_create callback calls synchronize_srcu.

Fixes this lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
4.3.0-rc1+ #1 Not tainted
-------------------------------
include/linux/kvm_host.h:488 suspicious rcu_dereference_check() usage!

other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-i38/17000:
 #0:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: kvm_zap_gfn_range+0x24/0x1a0 [kvm]

[...]
Call Trace:
 dump_stack+0x4e/0x84
 lockdep_rcu_suspicious+0xfd/0x130
 kvm_zap_gfn_range+0x188/0x1a0 [kvm]
 kvm_set_cr0+0xde/0x1e0 [kvm]
 init_vmcb+0x760/0xad0 [kvm_amd]
 svm_create_vcpu+0x197/0x250 [kvm_amd]
 kvm_arch_vcpu_create+0x47/0x70 [kvm]
 kvm_vm_ioctl+0x302/0x7e0 [kvm]
 ? __lock_is_held+0x51/0x70
 ? __fget+0x101/0x210
 do_vfs_ioctl+0x2f4/0x560
 ? __fget_light+0x29/0x90
 SyS_ioctl+0x4c/0x90
 entry_SYSCALL_64_fastpath+0x16/0x73
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Russell King says:

====================
Phy, mdiobus, and netdev struct device fixes

The third version of this series fixes the build error which David
identified, and drops the broken changes for the Cavium Thunger BGX
ethernet driver as this driver requires some complex changes to
resolve the leakage - and this is best done by people who can test
the driver.

Compared to v2, the only patch which has changed is patch 6
  "net: fix phy refcounting in a bunch of drivers"

I _think_ I've been able to build-test all the drivers touched by
that patch to some degree now, though several of them needed the
Kconfig hacked to allow it (not all had || COMPILE_TEST clause on
their dependencies.)

Previous cover letters below:

This is the second version of the series, with the comments David had
on the first patch fixed up.  Original series description with updated
diffstat below.

While looking at the DSA code, I noticed we have a
of_find_net_device_by_node(), and it looks like users of that are
similarly buggy - it looks like net/dsa/dsa.c is the only user.  Fix
that too.

Hi,

While looking at the phy code, I identified a number of weaknesses
where refcounting on device structures was being leaked, where
modules could be removed while in-use, and where the fixed-phy could
end up having unintended consequences caused by incorrect calls to
fixed_phy_update_state().

This patch series resolves those issues, some of which were discovered
with testing on an Armada 388 board.  Not all patches are fully tested,
particularly the one which touches several network drivers.

When resolving the struct device refcounting problems, several different
solutions were considered before settling on the implementation here -
one of the considerations was to avoid touching many network drivers.
The solution here is:

	phy_attach*() - takes a refcount
	phy_detach*() - drops the phy_attach refcount

Provided drivers always attach and detach their phys, which they should
already be doing, this should change nothing, even if they leak a refcount.

	of_phy_find_device() and of_* functions which use that take
	a refcount.  Arrange for this refcount to be dropped once
	the phy is attached.

This is the reason why the previous change is important - we can't drop
this refcount taken by of_phy_find_device() until something else holds
a reference on the device.  This resolves the leaked refcount caused by
using of_phy_connect() or of_phy_attach().

Even without the above changes, these drivers are leaking by calling
of_phy_find_device().  These drivers are addressed by adding the
appropriate release of that refcount.

The mdiobus code also suffered from the same kind of leak, but thankfully
this only happened in one place - the mdio-mux code.

I also found that the try_module_get() in the phy layer code was utterly
useless: phydev->dev.driver was guaranteed to always be NULL, so
try_module_get() was always being called with a NULL argument.  I proved
this with my SFP code, which declares its own MDIO bus - the module use
count was never incremented irrespective of how I set the MDIO bus up.
This allowed the MDIO bus code to be removed from the kernel while there
were still PHYs attached to it.

One other bug was discovered: while using in-band-status with mvneta, it
was found that if a real phy is attached with in-band-status enabled,
and another ethernet interface is using the fixed-phy infrastructure, the
interface using the fixed-phy infrastructure is configured according to
the other interface using the in-band-status - which is caused by the
fixed-phy code not verifying that the phy_device passed in is actually
a fixed-phy device, rather than a real MDIO phy.

Lastly, having mdio_bus reversing phy_device_register() internals seems
like a layering violation - it's trivial to move that code to the phy
device layer.
====================
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_find_net_device_by_node() uses class_find_device() internally to
lookup the corresponding network device.  class_find_device() returns
a reference to the embedded struct device, with its refcount
incremented.

Add a comment to the definition in net/core/net-sysfs.c indicating the
need to drop this refcount, and fix the DSA code to drop this refcount
when the OF-generated platform data is cleaned up and freed.  Also
arrange for the ref to be dropped when handling errors.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a phy_device_remove() function to complement phy_device_register(),
which undoes the effects of phy_device_register() by removing the phy
device from visibility, but not freeing it.

This allows these details to be moved out of the mdio bus code into
the phy code where this action belongs.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Validate that the phy_device passed into fixed_phy_update_state() is a
fixed-phy device before walking the list of phys for a fixed phy at the
same address.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_phy_find_device() increments the phy struct device refcount, which
we need to properly balance.  Add code to network drivers using this
function to ensure that the struct device refcount is correctly
balanced.

For xgene, looking back in the history, we should be able to use
of_phy_connect() with a zero flags argument for the DT case as this is
how the driver used to operate prior to de7b5b3d ("net: eth: xgene:
change APM X-Gene SoC platform ethernet to support ACPI").

This leaves the Cavium Thunder BGX unfixed; fixing this driver is a
complicated task, one which the maintainers need to be involved with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

bus_find_device() is defined as:

 * This is similar to the bus_for_each_dev() function above, but it
 * returns a reference to a device that is 'found' for later use, as
 * determined by the @match callback.

and it does indeed return a reference-counted pointer to the device:

        while ((dev = next_device(&i)))
                if (match(dev, data) && get_device(dev))
                                        ^^^^^^^^^^^^^^^
                        break;
        klist_iter_exit(&i);
        return dev;

What that means is that when we're done with the struct device, we must
drop that reference.  Neither of_phy_connect() nor of_phy_attach() did
this when phy_connect_direct() or phy_attach_direct() failed.

With our previous patch, phy_connect_direct() and phy_attach_direct()
take a new refcount on the phy device when successful, so we can drop
our local reference immediatley after these functions, whether or not
they succeeded.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Take a refcount on the phy struct device when the phy device is attached
to a network device, and drop it after it's detached.  This ensures that
a refcount is held on the phy device while the device is being used by
a network device, thereby preventing the phy_device from being
unexpectedly kfree()'d by phy_device_release().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Re-implement the mdiobus module refcounting to ensure that we actually
ensure that the mdiobus module code does not go away while we might call
into it.

The old scheme using bus->dev.driver was buggy, because bus->dev is a
class device which never has a struct device_driver associated with it,
and hence the associated code trying to obtain a refcount did nothing
useful.

Instead, take the approach that other subsystems do: pass the module
when calling mdiobus_register(), and record that in the mii_bus struct.
When we need to increment the module use count in the phy code, use
this stored pointer.  When the phy is deteched, drop the module
refcount, remembering that the phy device might go away at that point.

This doesn't stop the mii_bus going away while there are in-use phys -
it merely stops the underlying code vanishing.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current users of of_mdio_find_bus() leak a struct device refcount, as
they fail to clean up the reference obtained inside class_find_device().

Fix the DSA code to properly refcount the returned MDIO bus by:
1. taking a reference on the struct device whenever we assign it to
   pd->chip[x].host_dev.
2. dropping the reference when we overwrite the existing reference.
3. dropping the reference when we free the data structure.
4. dropping the initial reference we obtained after setting up the
   platform data structure, or on failure.

In step 2 above, where we obtain a new MDIO bus, there is no need to
take a reference on it as we would only have to drop it immediately
after assignment again, iow:

	put_device(cd->host_dev);	/* drop original assignment ref */
	cd->host_dev = get_device(&mdio_bus_switch->dev); /* get our ref */
	put_device(&mdio_bus_switch->dev); /* drop of_mdio_find_bus ref */
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_mdio_find_bus() leaks a struct device refcount, caused by using
class_find_device() and not realising that the device reference has
its refcount incremented:

 * Note, you will need to drop the reference with put_device() after use.
...
        while ((dev = class_dev_iter_next(&iter))) {
                if (match(dev, data)) {
                        get_device(dev);
                        break;
                }

Update the comment, and arrange for the phy code to drop this refcount
when disposing of a reference to it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull thermal management fixes from Zhang Rui:

 - Power allocator governor changes to allow binding on thermal zones
   with missing power estimates information.  From Javi Merino.

 - Add compile test flags on thermal drivers that allow it without
   producing compilation errors.  From Eduardo Valentin.

 - Fixes around memory allocation on cpu_cooling.  From Javi Merino.

 - Fix on db8500 cpufreq code to allow autoload.  From Luis de
   Bethencourt.

 - Maintainer entries for cpu cooling device

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: power_allocator: exit early if there are no cooling devices
  thermal: power_allocator: don't require tzp to be present for the thermal zone
  thermal: power_allocator: relax the requirement of two passive trip points
  thermal: power_allocator: relax the requirement of a sustainable_power in tzp
  thermal: Add a function to get the minimum power
  thermal: cpu_cooling: free power table on error or when unregistering
  thermal: cpu_cooling: don't call kcalloc() under rcu_read_lock
  thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driver
  thermal: cpu_cooling: Add MAINTAINERS entry
  thermal: ti-soc: Kconfig fix to avoid menu showing wrongly
  thermal: ti-soc: allow compile test
  thermal: qcom_spmi: allow compile test
  thermal: exynos: allow compile test
  thermal: armada: allow compile test
  thermal: dove: allow compile test
  thermal: kirkwood: allow compile test
  thermal: rockchip: allow compile test
  thermal: spear: allow compile test
  thermal: hisi: allow compile test
  thermal: Fix thermal_zone_of_sensor_register to match documentation

Pull DeviceTree fixes from Rob Herring:
 - Silence bogus warning for of_irq_parse_pci
 - Fix typo in ARM idle-states binding doc and dts files
 - Various minor binding documentation updates

* tag 'devicetree-fixes-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  Documentation: arm: Fix typo in the idle-states bindings examples
  gpio: mention in DT binding doc that <name>-gpio is deprecated
  of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages.
  devicetree: bindings: Extend the bma180 bindings with bma250 info
  of: thermal: Mark cooling-*-level properties optional
  of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level
  Docs: dt: add #msi-cells to GICv3 ITS binding
  of: add vendor prefix for Socionext Inc.

Currently error log messages in ip6_tnl_err are printed at 'warn'
level. This is different to other tunnel types which don't print
any messages. These log messages don't provide any information that
couldn't be deduced with networking tools. Also it can be annoying
to have one end of the tunnel go down and have the logs fill with
pointless messages such as "Path to destination invalid or inactive!".

This patch reduces the log level of these messages to 'dbg' level to
bring the visible behaviour into line with other tunnel types.
Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

The idle-states bindings mandate that the entry-method string
in the idle-states node must be "psci" for ARM v8 64-bit systems,
but the examples in the bindings report a wrong entry-method string.
Owing to this typo, some dts in the kernel wrongly defined the
entry-method property, since they likely cut and pasted the example
definition without paying attention to the bindings definitions.

This patch fixes the typo in the DT idle states bindings examples and
respective dts in the kernel so that the bindings and related dts
files are made compliant.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Howard Chen <howard.chen@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>

The gpiolib supports parsing DT properties of the form <name>-gpio but it
was only added for compatibility with older DT bindings that got it wrong
and should not be used in newer bindings.

The commit that added support for this was:

dd34c37a ("gpio: of: Allow -gpio suffix for property names")

but didn't update the documentation to explain this so it's been a source
of confusion. So let's make this clear in the GPIO DT binding doc.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull drm fixes from Dave Airlie:
 "Most of the GPU drivers people were at XDC last week, so I didn't get
  much to send, so I let it rollover until this week.

  Also Alex was away for 3 weeks so amdgpu/radeon got a bit more stuff
  than usual in one go.

  I've been trying to figure out some 4.2 issues with i915 still (that
  are fixed in 4.3, but bisecting ends up in a merge commit).  Hopefully
  next week I or i915 people can work that out"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (46 commits)
  drm: Allow also control clients to check the drm version
  drm/vmwgfx: Fix uninitialized return in vmw_kms_helper_dirty()
  drm/vmwgfx: Fix uninitialized return in vmw_cotable_unbind()
  drm/layerscape: fix handling fsl_dcu_drm_plane_index result
  drm/mgag200: Fix driver_load error handling
  drm/mgag200: Fix error handling paths in fbdev driver
  drm/qxl: only report first monitor as connected if we have no state
  drm/radeon: add quirk for MSI R7 370
  drm/amdgpu: Sprinkle drm_modeset_lock_all to appease locking checks
  drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checks
  drm/amdgpu: sync ce and me with SWITCH_BUFFER(2)
  drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()
  drm/amdgpu: info leak in amdgpu_gem_metadata_ioctl()
  drm/amdgpu: integer overflow in amdgpu_info_ioctl()
  drm/amdgpu: unwind properly in amdgpu_cs_parser_init()
  drm/amdgpu: Fix max_vblank_count value for current display engines
  drm/amdgpu: use kmemdup rather than duplicating its implementation
  drm/amdgpu: fix UVD suspend and resume for VI APU
  drm/amdgpu: fix the UVD suspend sequence order
  drm/amdgpu: make UVD handle checking more strict
  ...

Merge tag 'mac80211-for-davem-2015-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just two small fixes:
 * VHT MCS mask array overrun, reported by Dan Carpenter
 * reset CQM history to always get a notification, from Sara Sharon
====================
Signed-off-by: David S. Miller <davem@davemloft.net>