Add kernel trace that device was removed.
Currently there is no such information.
I.e. Host admin removes a PCI device from a VM,
than on VM shall be info about the event.

This patch adds info log to iavf_remove function.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The iavf_parse_cls_flower function returns an integer error code, and
not an iavf_status enumeration.

Fix the function to use the standard errno value EINVAL as its return
instead of using IAVF_ERR_CONFIG.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add log when VF is entering and leaving Allmulti mode.
The change of VF state is visible in dmesg now.
Without this commit, entering and leaving Allmulti mode
is not logged in dmesg.
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add a netdev_dbg log entry in case of a change of MTU so that user is
notified about this change in the same manner as in case of pf driver.
Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

It's not necessary to free memory allocated with devm_kzalloc
and using kfree leads to a double free.

Fixes: 35aefaad ("net: ixp4xx_hss: Convert to use DT probing")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If err is true, the function will be returned, but mutex_lock isn't
released.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sparse tool complains as follows:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2656:28: warning:
 symbol 'hclge_mac_speed_map_to_fw' was not declared. Should it be static?

This symbol is not used outside of hclge_main.c, so marks it static.

Fixes: e46da6a3 ("net: hns3: refine function hclge_cfg_mac_speed_dup_hw()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Volodymyr Mytnyk says:

====================
net: prestera: acl: migrate to new vTcam/counter api

This patch series aims to use new vTcam and Counter API
provided by latest fw version. The advantage of using
this API is the following:

- provides a way to have a rule with desired Tcam size (improves
  Tcam memory utilization).
- batch support for acl counters gathering (improves performance)
- gives more control over HW ACL engine (actions/matches/bindings)
  to be able to support more features in the future driver
  versions

Note: the feature set left the same as was before this patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make flower to use counter API to get rule HW statistics.
Co-developed-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add counter API for getting HW statistics.

- HW statistics gathered by this API are deleyed.
- Batch of conters is supported.
- acl stat is supported.
Co-developed-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Add new vTCAM HW API to configure HW ACLs.
- Migrate acl to use new vTCAM HW API.
- No counter support in this patch-set.
Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The devlink_resources_unregister() used second parameter as an
entry point for the recursive removal of devlink resources. None
of the callers outside of devlink core needed to use this field,
so let's remove it.

As part of this removal, the "struct devlink_resource" was moved
from .h to .c file as it is not possible to use in any place in
the code except devlink.c.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the blamed commit, the second memory resource was not considered
anymore as optional. On some platforms like sparx5 the second resource
is optional. So add it back as optional and restore the comment that
says so.

Fixes: a27a7628 ("net: mdio: mscc-miim: convert to a regmap implementation")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have VLAN PTP support(via get_ts_info) on kernel, and bond support(by
getting active interface via netlink message) on userspace tool linuxptp.
But there are always some users who want to use PTP with VLAN over bond,
which is not able to do with the current implementation.

This patch passed get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device
with bond mode active-backup/tlb/alb. With this users could get kernel native
bond or VLAN over bond PTP support.

Test with ptp4l and it works with VLAN over bond after this patch:
]# ptp4l -m -i bond0.23
ptp4l[53377.141]: selected /dev/ptp4 as PTP clock
ptp4l[53377.142]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[53377.143]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[53377.143]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[53384.127]: port 1: LISTENING to MASTER on ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES
ptp4l[53384.127]: selected local clock e41d2d.fffe.123db0 as best master
ptp4l[53384.127]: port 1: assuming the grand master role
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a trivial typo of 'pakcet' in cxgb kernel doc.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix two trivial typos of 'pakcet' in cxgb3 kernel doc.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the missing free_netdev() before return from ltq_etop_probe()
in the error handling case.

Fixes: 14d4e308 ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can remove a bit of code duplication by reusing the new
fib6_nh_release_dsts helper in fib6_nh_release. Their only difference is
that fib6_nh_release's version doesn't use atomic operation to swap the
pointers because it assumes the fib6_nh is no longer visible, while
fib6_nh_release_dsts can be used anywhere.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can optimize resilient nexthop group replaces by reducing the number of
synchronize_net calls. After commit 1005f19b ("net: nexthop: release
IPv6 per-cpu dsts when replacing a nexthop group") we always do a
synchronize_net because we must ensure no new dsts can be created for the
replaced group's removed nexthops, but we already did that when replacing
resilient groups, so if we always call synchronize_net after any group
type replacement we'll take care of both cases and reduce synchronize_net
calls for resilient groups.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Assigning crypto_info variables in advance can simplify the logic
of accessing value and move related local variables to a smaller
scope.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dwmac-qcom-ethqos currently exposes a mechanism to dump rgmii registers
after the 'stmmac_dvr_probe()' returns. However with commit
5ec55823 ("net: stmmac: add clocks management for gmac driver"),
we now let 'pm_runtime_put()' disable the clocks before returning from
'stmmac_dvr_probe()'.

This causes a crash when 'rgmii_dump()' register dumps are enabled,
as the clocks are already off.

Since other dwmac drivers (possible future users as well) might
require a similar register dump feature, introduce a platform level
callback to allow the same.

This fixes the crash noticed while enabling rgmii_dump() dumps in
dwmac-qcom-ethqos driver as well. It also allows future changes
to keep a invoking the register dump callback from the correct
place inside 'stmmac_dvr_probe()'.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'dest' bitmap is fully initialized by the 'for' loop, so there is no
need to explicitly reset it.

This also makes this function in line with 'ethnl_features_to_bitmap32()'
which does not clear the destination before writing it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/17fca158231c6f03689bd891254f0dd1f4e84cb8.1638091829.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With this feature, we can use the ethtools to get tx/rx
queues stats. This patch, introduce the ifb_update_q_stats
helper to update the queues stats, and ifb_q_stats to simplify
the codes.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Link: https://lore.kernel.org/r/20211128014631.43627-1-xiangxia.m.yue@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I think there's no benefit in reporting a date from almost 6 yrs ago.
Let ethtool report the default (kernel version) instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.

Generated by: scripts/coccinelle/misc/flexible_array.cocci

Fixes: 23ae3a78 ("net: dsa: felix: add stream gate settings for psfp")
CC: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
hns3: some cleanups for -next

To improve code readability and simplicity, this series refactor some
functions in the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hns3_set_l2l3l4() is a bit too long. So add two
new functions hns3_set_l3_type() and hns3_set_l4_csum_length()
to simplify code and improve code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hns3_handle_bdinfo() is a bit too long. So add two
new functions hns3_handle_rx_ts_info() and hns3_handle_rx_vlan_tag(
to simplify code and improve code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hns3_nic_get_stats64() is a bit too long. So add a
new function hns3_fetch_stats() to simplify code and improve
code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch encapsulates the process code for queue to qset config of two
mode(tc based and vnet based) into two function, for making code more
concise.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch encapsulates the process code of tc based schedule mode of
function hclge_tm_lvl34_schd_mode_cfg() into a new function
hclge_tm_schd_mode_tc_base_cfg(). It make code more concise and the new
process code can be reused.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To reuse the code of converting speed of driver to speed of firmware in
function hclge_cfg_mac_speed_dup_hw(), encapsulate them into a new
function hclge_convert_to_fw_speed().
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hns3_get_tx_timeo_queue_info() is a bit too long. So add two
new functions hns3_dump_queue_stats() and hns3_dump_queue_reg() to
simplify code and improve code readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use for statement to optimize some print work of function
hclge_dbg_dump_rst_info() and hclge_dbg_dump_mac_enable_status() to
improve code simplicity.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split rx copybreak handle into a separate function from function
hns3_nic_reuse_page() to improve code simplicity.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the hclge_reset_prepare_general function uses the goto
statement to jump upwards, which increases code complexity and makes
the program structure difficult to understand. In addition, if
reset_pending is set, retry_cnt cannot be increased. This may result
in a failure to exit the retry or increase the number of retries.

Use the while statement instead to make the program easier to understand
and solve the problem that the goto statement cannot be exited.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Once tcp small queue check failed in tcp_small_queue_check(), the
throughput of tcp will be limited, and it's hard to distinguish
whether it is out of tcp congestion control.

Add statistics of LINUX_MIB_TCPSMALLQUEUEFAILURE for this scene.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.

Fixes: e44ef4e4 ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Colin Foster says:

====================
update seville to use shared MDIO driver

This patch set exposes and utilizes the shared MDIO bus in
drivers/net/mdio/msio-mscc-miim.c

v3:
    * Fix errors using uninitilized "dev" inside the probe function.
    * Remove phy_regmap from the setup function, since it currently
    isn't used
    * Remove GCB_PHY_PHY_CFG definition from ocelot.h - it isn't used
    yet...

v2:
    * Error handling (thanks Andrew Lunn)
    * Fix logic errors calling mscc_miim_setup during patch 1/3 (thanks
    Jakub Kicinski)
    * Remove unnecessary felix_mdio file (thanks Vladimir Oltean)
    * Pass NULL to mscc_miim_setup instead of GCB_PHY_PHY_CFG, since the
    phy reset isn't handled at that point of the Seville driver (patch
    3/3)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>