This driver only supports a cmd->start_src of TRIG_INT for ao commands. The
cmd->start_arg is trivially validated to be 0. For TRIG_INT source, the
cmd->start_arg is actually the valid trig_num that is passed to the async
(*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The cmd->start_arg should be trivially validated in Step 3 of the
(*do_cmdtest) functions. Add the necessary code.

For the analog output, a cmd->start_src of TRIG_NOW and TRIG_INT is
supported. For both sources the cmd->start_arg is validated to be 0.
For a TRIG_INT source, the cmd->start_Arg is actually the valid trig_num
that is passed to the async (*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used to
check the trig_num instead of the open coded value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver only supports a cmd->start_src of TRIG_INT for ai commands. The
cmd->start_arg is trivially validated to be 0. For TRIG_INT source, the
cmd->start_arg is actually the valid trig_num that is passed to the async
(*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver supports two cmd->start_src values, TRIG_NOW and TRIG_EXT.

For aesthetics, replace the default case when validating the cmd->start_arg
with the proper case statement.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver trivially validates the cmd->start_arg for all cmd->start_src values
to be 0. For TRIG_INT source, the cmd->start_arg is actually the valid trig_num
that is passed to the async (*inttrig) callback.

Refactor the (*inttrig) functions so that the cmd->start_arg is used to check the
trig_num instead of the open coded values.

For aesthetics, refactor the ai (*do_cmd) to remove some unnecessary {}.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver supports two cmd->start_src values, TRIG_INT and TRIG_EXT. For
TRIG_INT sources, the cmd->start_arg is actually the valid trig_num that is
passed to the async (*inttrig) callback. This driver trivially validates the
arg for this source to be 0.

Refactor the (*inttrig) so that the cmd->start_arg is used to check the trig_num
instead of the open coded value.

For aesthetics, refactor the (*do_cmd) to use if/else instead of the switch when
handling the cmd->start_src. All code paths do the spin lock/unlock so move those
out of the if/else.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver supports two cmd->start_src values, TRIG_NOW and TRIG_INT. TRIG_NOW
sources should always have an arg of 0. For TRIG_INT sources, the cmd->start_arg
is actually the valid trig_num that is passed to the async (*inttrig) callback.
This driver trivially validates the arg for both sources to be 0.

Refactor the (*inttrig) so that the cmd->start_arg is used to check the trig_num
instead of the open coded value.

For aesthetics, refactor the (*do_cmd) to use if/else instead of the switch when
handling the cmd->start_src.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver supports three cmd->start_src values, TRIG_NOW, TRIG_EXT, and
TRIG_INT. TRIG_NOW sources should always have an arg of 0 and arg for TRIG_EXT
sources is driver specific. This driver does not use the cmd->start_arg with
the TRIG_EXT source so a trivial value of 0 is good.

When the cmd->start_src is TRIG_INT the cmd->start_arg is actually the valid
trig_num that is passed to the async (*inttrig) callback. This driver allows
any value to be used and currently carries that value in the private data.

Refactor the (*do_cmdtest) so that the trivial validation of the cmd->start_arg
is clear.

Refactor the (*inttrig) so that the cmd->start_arg is used directly to check
the trig_num and remove the then unused 'ai_inttrig_start' member from the
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The async command 'arguments' should be trivially validated in Step 3 of
the (*do_cmdtest) not Step 2b. Move the validataion in this driver to the
proper place.

This driver supports two cmd->start_src values, TRIG_NOW and TRIG_EXT.
TRIG_NOW sources should always have an arg of 0. The arg for TRIG_EXT
sources is driver specific.

Properly validate the cmd->start_arg based on the cmd->start_src. Remove
the noise when the arg is invalid and modify the cmd->start_arg so that
a valid value is returned to the user.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi_subdevices array is kzalloc()'d so the async command callbacks do
not need to be set to NULL when the analog output subdevice is initialized.

Also, remove the initialzation of the subdevice 'len_chanlist' since this
value is only used by the async commands. The core will default it to 1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename the local variable 'error' to 'err'. This is the
normal name for this local variable in (*do_cmdtest) functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to a driver limitation, the (*do_cmdtest) for the analog input subdevice
overrides the cmd->chanlist_len to force single channel chanlists. But, the
cmd->scan_end_arg was already validated before this happens. Instead of
fixing the (*do_cmdtest) just set the subdevice len_chanlist to 1 to limit
the chanlist size. Move the comment also.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the async command 'scan_end_src' is TRIG_COUNT the 'scan_end_arg'
is the cmd->chanlist_len. Fix a couple open-coded drivers. Add the
check to the drivers that do not validate this command argument.

The core validates that the cmd->chanlist_len is <= s->len_chanlist.
During the post config after the attach the core also make sure that
the s->len_chanlist is initialized. For clarity, initialize the
s->len_chanlist in a couple drivers that are relying on the core to
initialize it to '1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core checks if the (cmd->chanlist_len > s->len_chanlist) when the
comedi_cmd is copied from user to kernel space by __comedi_get_user_cmd().
If so, the core returns -EINVAL and will not call the subdevice (*do_cmdtest)
and (*do_cmd).

Remove the unnecessary "max" checks in the comedi driver (*do_cmdtest) and
helper functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The labpc_ai_chanlist_invalid() function validates that the cmd->chanlist
is compatible with the hardware. This is step 5 of the (*do_cmdtest).

For aesthetics, rename this function and tidy up the code.

To minimize the noise, change the comedi_error(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ai_check_chanlist() function validates that the cmd->chanlist is compatible
with the hardware. This is step 5 of the (*do_cmdtest).

For aesthetics, rename this function so it has namespace associated with the
driver and tidy up the code.

To minimize the noise, change the dev_err() to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

Remove the unnecessary step 5 code in the analog output async command support.

For aesthetics, factor out the step 5 code for the "cdio" async command support.
Tidy up the factored out code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input async command
support. Tidy up the factored out code.

To minimize the noise, change the comedi_error(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the async command support. Tidy
up the factored out code.

To minimize the noise, change the dev_err() to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input async command
support. Tidy up the factored out code.

To minimize the noise, change the comedi_error(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input async command
support. Tidy up the factored out code.

To minimize the noise, change the dev_err() to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input async command
support. Tidy up the factored out code.

To minimize the noise, change the comedi_error(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input async command
support. Tidy up the factored out code.

To minimize the noise, change the comedi_error(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input async command
support. Tidy up the factored out code.

To minimize the noise, change the dev_err() to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input and analog
output async command support. Tidy up the factored out code.

To minimize the noise, change the comedi_error(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input and analog
output async command support. Tidy up the factored out code.

To minimize the noise, change the comedi_error(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog output and analog
input async command support. Tidy up the factored out code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor the step 5 code for the analog output async command
support. Tidy up the factored out code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.

For aesthetics, factor out the step 5 code for the analog input async command
support. Tidy up the factored out code.

To minimize the noise, change the comedi_err(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devpriv->iobase is currently being used to hold the iobase address used to
read/write the board's registers.  The same address is stored in the
comedi_device dev->iobase.  We use that instead.  The eventual goal is to
decrease the driver's use of the struct addi_private, so that it may
eventually use a much slimmer specialized private struct instead, as the
other addi_apci_* drivers do.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This resolves a bunch of merge errors with other fixes that are already
in Linus's tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull slave-dmaengine fixes from Vinod Koul:
 "Back from long weekend here in India and now the time to send fixes
  for slave dmaengine.
   - Dan's fix of sirf xlate code
   - Jean's fix for timberland
   - edma fixes by Sekhar for SG handling and Yuan for changing init
     call"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: fix eDMA driver as a subsys_initcall
  dmaengine: sirf: off by one in of_dma_sirfsoc_xlate()
  platform: Fix timberdale dependencies
  dma: edma: fix incorrect SG list handling

Pull iommu fixes from Joerg Roedel:
 "Fixes for regressions:

   - fix wrong IOMMU enumeration causing some SCSI device drivers
     initialization failures
   - ARM-SMMU fixes for a panic condition and a wrong return value"

* tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte
  iommu/arm-smmu: Return 0 on unmap failure
  iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors
  iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges
  iommu/vt-d: fix memory leakage caused by commit ea8ea460

Pull perf tooling fixes from Ingo Molnar:
 "Three small tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Improve error reporting
  perf tools: Adjust symbols in VDSO
  perf kvm: Fix 'Min time' counting in report command

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent

Pull perf/urgent fixes from Jiri Olsa:

User visible changes:

  * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev)

  * Improve error reporting for record session failure (Adrien BAK)

  * Fix 'Min time' counting in report command (Alexander Yarygin)
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

In the current version, when using perf record, if something goes
wrong in tools/perf/builtin-record.c:375
  session = perf_session__new(file, false, NULL);

The error message:
"Not enough memory for reading per file header"

is issued. This error message seems to be outdated and is not very
helpful. This patch proposes to replace this error message by
"Perf session creation failed"

I believe this issue has been brought to lkml:
https://lkml.org/lkml/2014/2/24/458
although this patch only tackles a (small) part of the issue.

Additionnaly, this patch improves error reporting in
tools/perf/util/data.c open_file_write.

Currently, if the call to open fails, the user is unaware of it.
This patch logs the error, before returning the error code to
the caller.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Adrien BAK <adrien.bak@metascale.org>
Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast
[ Reorganize the changelog into paragraphs ]
[ Added empty line after fd declaration in open_file_write ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>

pert-report doesn't resolve function names in VDSO:

$ perf report --stdio -g flat,0.0,15,callee --sort pid
...
            8.76%
               0x7fff6b1fe861
               __gettimeofday
               ACE_OS::gettimeofday()
...

In this case symbol values should be adjusted the same way as for executables,
relocatable objects and prelinked libraries.

After fix:

$ perf report --stdio -g flat,0.0,15,callee --sort pid
...
            8.76%
               __vdso_gettimeofday
               __gettimeofday
               ACE_OS::gettimeofday()
Signed-off-by: Vladimir Nikulichev <nvs@tbricks.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvsSigned-off-by: Jiri Olsa <jolsa@redhat.com>

Every event in the perf-kvm has a 'stats' structure, which contains
max/min/average/etc times of handling this event.
The problem is that the 'perf-kvm stat report' command always shows
that 'min time' is 0us for every event. Example:

 # perf kvm stat report

 Analyze events for all VCPUs:

    VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time Avg time
  [..]
  0xB2 MSCH         12     0.07%     0.00%        0us        8us 7.31us ( +-   2.11% )
  0xB2 CHSC         12     0.07%     0.00%        0us       18us 9.39us ( +-   9.49% )
  0xB2 STPX          8     0.05%     0.00%        0us        2us 1.88us ( +-   7.18% )
  0xB2 STSI          7     0.04%     0.00%        0us       44us 16.49us ( +-  38.20% )
  [..]

This happens because the 'stats' structure is not initialized and
stats->min equals to 0. Lets initialize the structure for every
event after its allocation using init_stats() function. This initializes
stats->min to -1 and makes 'Min time' statistics counting work:

 # perf kvm stat report

 Analyze events for all VCPUs:

    VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time Avg time
  [..]
  0xB2 MSCH         12     0.07%     0.00%        6us        8us 7.31us ( +-   2.11% )
  0xB2 CHSC         12     0.07%     0.00%        7us       18us 9.39us ( +-   9.49% )
  0xB2 STPX          8     0.05%     0.00%        1us        2us 1.88us ( +-   7.18% )
  0xB2 STSI          7     0.04%     0.00%        1us       44us 16.49us ( +-  38.20% )
  [..]
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com
[ Fixing the perf examples changelog output ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>

A va_list needs to be copied in case it needs to be used twice.

Thanks to Hugh for debugging this issue, leading to various panics.

Tested:

  lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern

'produce_core' is simply : main() { *(int *)0 = 1;}

  lpq84:~# ./produce_core
  Segmentation fault (core dumped)
  lpq84:~# dmesg | tail -1
  [  614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed

Notice the last argument was replaced by a NULL (we were lucky enough to
not crash, but do not try this on your production machine !)

After fix :

  lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern
  lpq83:~# ./produce_core
  Segmentation fault
  lpq83:~# dmesg | tail -1
  [  740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed

Fixes: 5fe9d8ca ("coredump: cn_vprintf() has no reason to call vsnprintf() twice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Hugh Dickins <hughd@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>