- 11 Sep, 2013 40 commits
-
-
Jingoo Han authored
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Maxim Levitsky authored
Based partially on MS standard spec quotes from Alex Dubov. As any code that works with user data this driver isn't recommended to use to write cards that contain valuable data. It tries its best though to avoid data corruption and possible damage to the card. Tested on MS DUO 64 MB card on Ricoh R592 card reader. Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alex Dubov <oakad@yahoo.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Joe Perches authored
Fix thinkos where pkt_<level> needs a valid pktcdvd_device * and the pointer is known to be NULL. Signed-off-by:
Joe Perches <joe@perches.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (go smatch!) Signed-off-by:
-
Joe Perches authored
Allow the device name to be emitted with pkt_err when logging the sense data. Signed-off-by:
-
Joe Perches authored
Add a new pkt_info macro to prefix the name to the logging output. Signed-off-by:
-
Joe Perches authored
Add a new pkt_notice macro to prefix the name to the logging output. Signed-off-by:
-
Joe Perches authored
Add a new pkt_err macro to prefix the name to the logging output. Convert pr_err where there is a non-null struct pktcdvd_device. Includes improvements from Andy Shevchenko. Signed-off-by:
-
Joe Perches authored
Add pd->name to output for these debugging messages. Remove normally compiled out pkt_dbg(2, ...) function entry tracing equivalents as it's better done via the function tracer. Signed-off-by:
-
Joe Perches authored
Use the more common pkt_dbg(level, fmt, ...) form. These messages are emitted at KERN_NOTICE. Always emit function name with pkt_dbg(2, ...) uses and remove the sometimes abbreviated embedded function name. This form always verifies the format and arguments. Signed-off-by:
-
Joe Perches authored
Use a more current logging style and add messages levels to the logging messages. Simplify pkt_dump_sense by using %*ph and adding a simple function to emit the sense string. Includes improvements from Andy Shevchenko and Dan Carpenter. Signed-off-by:
-
Joe Perches authored
Macros should be converted to functions where feasible to verify arguments and the like. Signed-off-by:
-
Kees Cook authored
Since the panic handlers may produce additional information (via printk) for the kernel log, it should be reported as part of the panic output saved by kmsg_dump(). Without this re-ordering, nothing that adds information to a panic will show up in pstore's view when kmsg_dump runs, and is therefore not visible to crash reporting tools that examine pstore output. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Acked-by:
Tony Luck <tony.luck@intel.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Dan Carpenter authored
It seems pretty unlikely that AFFS supports files over 4GB but we may as well leave use loff_t just for cleanness sake instead of truncating it to 32 bits. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ed Cashin authored
When the example udev rules in the documentation are used without modification, warnings like the one shown below appear in the system logs: /var/log/messages:Aug 22 11:09:11 kung udevd[445]: NAME="%k" \ is superfluous and breaks kernel supplied names, please remove \ it from /etc/udev/rules.d/60-aoe.rules:26 Removing the term does not cause any problems with the creation of the special character and block device nodes. Signed-off-by:Ed Cashin <ecashin@coraid.com> Signed-off-by:
-
Ed Cashin authored
If the system has trouble allocating memory for the creation of the aoe debugfs directory or of a file inside it, the debugfs member of an aoedev can be NULL. Do not treat a NULL debugfs pointer as a BUG on aoedev shutdown, avoiding the user impact of an unecessary panic. Signed-off-by:
-
Andy Shevchenko authored
This patch fixes following compiler warnings: drivers/block/aoe/aoecmd.c: In function `aoecmd_ata_rw': drivers/block/aoe/aoecmd.c:383:17: warning: variable `t' set but not used [-Wunused-but-set-variable] struct aoetgt *t; ^ drivers/block/aoe/aoecmd.c: In function `resend': drivers/block/aoe/aoecmd.c:488:21: warning: variable `ah' set but not used [-Wunused-but-set-variable] struct aoe_atahdr *ah; ^ Signed-off-by:Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ed Cashin <ecashin@coraid.com> Signed-off-by:
-
Andy Shevchenko authored
In the kernel we have a nice helper that may be used here. This patch substitutes the custom implementation by the native function call. Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
-
Ed Cashin authored
This information is presented in a compact format that has evolved for easy routine scanning by expert humans, mostly developers and support technicians helping to troubleshoot or test AoE-based systems. Signed-off-by:
-
Ed Cashin authored
The place holder in the file contents is filled out in the following patch. Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
-
Ed Cashin authored
This series adds the debugging information that the coraid.com-distributed aoe driver exports via sysfs, but instead of sysfs, it uses debugfs. With these patches applied, even without AoE targets on the network, KEDR reports new possible memory leaks, but these are from callers outside the aoe driver that have used aoe_devnode to get the name of the character devices through the aoe_class->devnode callback, and I believe they're responsible for freeing that memory. This patch: Create and destroy the debugfs directory. Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Reviewed-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by:
-
Cody P Schafer authored
No reason require rbtree test code to be a module, allow it to be builtin (streamlines my development process) Signed-off-by:
-
Cody P Schafer authored
Just check that we examine all nodes in the tree for the postorder iteration. Signed-off-by:
-
Cody P Schafer authored
Because deletion (of the entire tree) is a relatively common use of the rbtree_postorder iteration, and because doing it safely means fiddling with temporary storage, provide a helper to simplify postorder rbtree iteration. Signed-off-by:
-
Cody P Schafer authored
Postorder iteration yields all of a node's children prior to yielding the node itself, and this particular implementation also avoids examining the leaf links in a node after that node has been yielded. In what I expect will be its most common usage, postorder iteration allows the deletion of every node in an rbtree without modifying the rbtree nodes (no _requirement_ that they be nulled) while avoiding referencing child nodes after they have been "deleted" (most commonly, freed). I have only updated zswap to use this functionality at this point, but numerous bits of code (most notably in the filesystem drivers) use a hand rolled postorder iteration that NULLs child links as it traverses the tree. Each of those instances could be replaced with this common implementation. 1 & 2 add rbtree postorder iteration functions. 3 adds testing of the iteration to the rbtree runtime tests 4 allows building the rbtree runtime tests as builtins 5 updates zswap. This patch: Add postorder iteration functions for rbtree. These are useful for safely freeing an entire rbtree without modifying the tree at all. Signed-off-by:
-
Andrew Morton authored
Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Karel Zak <kzak@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Davidlohr Bueso authored
Trivial coding style cleanups - still plenty left. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Reviewed-by:
Karel Zak <kzak@redhat.com> Acked-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Davidlohr Bueso authored
I love emacs, but these settings for coding style are annoying when trying to open the efi.h file. More important, we already have checkpatch for that. Signed-off-by:
-
Davidlohr Bueso authored
When verifying GPT header integrity, make sure that first usable LBA is smaller than last usable LBA. Signed-off-by:
-
Davidlohr Bueso authored
The partition that has the 0xEE (GPT protective), must have the size in lba field set to the lesser of the size of the disk minus one or 0xFFFFFFFF for larger disks. Signed-off-by:
-
Davidlohr Bueso authored
One of the biggest problems with GPT is compatibility with older, non-GPT systems. The problem is addressed by creating hybrid mbrs, an extension, or variant, of the traditional protective mbr. This contains, apart from the 0xEE partition, up three additional primary partitions that point to the same space marked by up to three GPT partitions. The result is that legacy OSs can see the three required MBR partitions and at the same time ignore the GPT-aware partitions that protect the GPT structures. While hybrid MBRs are hacks, workarounds and simply not part of the GPT standard, they do exist and we have no way around them. For instance, by default, OSX creates a hybrid scheme when using multi-OS booting. In order for Linux to properly discover protective MBRs, it must be made aware of devices that have hybrid MBRs. No functionality is changed by this patch, just a debug message informing the user of the MBR scheme that is being used. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Davidlohr Bueso authored
When detecting a valid protective MBR, the Linux kernel isn't picky about the partition (1-4) the 0xEE is at, but, unlike other operating systems, it does require it to begin at the second sector (sector 1). This check, apart from it not being enforced by UEFI, and causing Linux to potentially fail to detect any *valid* partitions on the disk, can present problems when dealing with hybrid MBRs[1]. For compatibility reasons, if the first partition is hybridized, the 0xEE partition must be small enough to ensure that it only protects the GPT data structures - as opposed to the the whole disk in a protective MBR. This problem is very well described by Rod Smith[1]: where MBR-only partitioning programs (such as older versions of fdisk) can see some of the disk space as unallocated, thus loosing the purpose of the 0xEE partition's protection of GPT data structures. By dropping this check, this patch enables Linux to be more flexible when probing for GPT disklabels. [1] http://www.rodsbooks.com/gdisk/hybrid.html#reactionsSigned-off-by:
-
Davidlohr Bueso authored
Per the UEFI Specs 2.4, June 2013, the starting lba of the partition that has the EFI GPT (0xEE) must be set to 0x00000001 - this is obviously the LBA of the GPT Partition Header. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Davidlohr Bueso authored
The kernel's GPT implementation currently uses the generic 'struct partition' type for dealing with legacy MBR partition records. While this is is useful for disklabels that we designed for CHS addressing, such as msdos, it doesn't adapt well to newer standards that use LBA instead, such as GUID partition tables. Furthermore, these generic partition structures do not have all the required fields to properly follow the UEFI specs. While a CHS address can be translated to LBA, it's much simpler and cleaner to just replace the partition type. This patch adds a new 'gpt_record' type that is fully compliant with EFI and will allow, in the next patches, to add more checks to properly verify a protective MBR, which is paramount to probing a device that makes use of GPT. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Michael Holzheu authored
Modify the s390 copy_oldmem_page() and remap_oldmem_pfn_range() function for zfcpdump to read from the HSA memory if memory below HSA_SIZE bytes is requested. Otherwise real memory is used. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
