- 08 Oct, 2021 3 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.15-2021-10-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-10-06: amdgpu: - DCN 3.1 DP alt mode fixes - S0ix gfxoff fix - Fix DRM_AMD_DC_SI dependencies - PCIe DPC handling fix - DCN 3.1 scaling fix - Documentation fix amdkfd: - Fix potential memory leak - IOMMUv2 init fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211006203828.4818-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Rebased drm-misc-fixes for v5.15-rc5: - Dropped vc4 patches. - Compiler fix for vc4. - Cursor fix for nouveau. - Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support. - Small rockchip fixes. - Fix DT bindings indent for ili9341. - Fix y030xx067a init sequence to not get a yellow tint. - Kconfig fix for fb_simple vs simpledrm. - Assorted nouvaeu memory leaks. - Fix gbefb when built with COMPILE_TEST. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3272bf72-2c37-31eb-404e-cf7edd485c7d@linux.intel.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-10-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc5: - Fix RKL HDMI audio - Fix runtime pm imbalance on i915_gem_shrink() error path - Fix Type-C port access before hw/sw state sync - Fix VBT backlight struct version/size check - Fix VT-d async flip on SKL/BXT with plane stretch workaround Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87k0ipywo4.fsf@intel.com
-
- 06 Oct, 2021 18 commits
-
-
Hansen authored
[Why] DPALT detection for B0 PHY has its own set of RDPCSPIPE registers [How] Use RDPCSPIPE registers to detect if DPALT lane is 4 lane Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Nikola Cornij authored
[why] The existing limit was mistakenly bigger than 4k for DCN 3.1 Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
George Shen authored
[Why] Overriding link setting inside override_training_settings result in fallback link settings being ignored. This can potentially cause link training to always fail and consequently result in an infinite loop of link training to occur in dp_verify_link_cap during detection. [How] Since preferred link settings are already considered inside decide_link_settings, skip the check in override_training_settings to avoid infinite link training loops. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yang Yingliang authored
When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 6e9fc177 ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-2-yangyingliang@huawei.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Yang Yingliang authored
When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 12885ecb ("drm/nouveau/kms/nvd9-: Add CRC support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-1-yangyingliang@huawei.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Jeremy Cline authored
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm_bo_init() invokes the provided destructor which should de-initialize and free the memory. Thus, when nouveau_bo_init() returns an error the gem object has already been released and the memory freed by nouveau_bo_del_ttm(). Fixes: 019cbd4a ("drm/nouveau: Initialize GEM object before TTM object") Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203000220.18238-1-jcline@redhat.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Randy Dunlap authored
Remove documentation associated with the removal of the DRM IRQ legacy midlayer. Eliminates these documentation warnings: ../drivers/gpu/drm/drm_irq.c:1: warning: 'irq helpers' not found ../drivers/gpu/drm/drm_irq.c:1: warning: no structured comments found Fixes: c1736b90 ("drm: IRQ midlayer is now legacy") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211005025312.20913-1-rdunlap@infradead.orgSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Mark Brown authored
The gbefb driver not only registers a driver but also the device for that driver. This is all well and good when run on the IP32 machines that are supported by the driver but since the driver supports building with COMPILE_TEST we might also be building on other platforms which do not have this hardware and will crash instantiating the driver. Add an IS_ENABLED() check so we compile out the device registration if we don't have the Kconfig option for the machine enabled. Fixes: 552ccf6b ("video: fbdev: gbefb: add COMPILE_TEST support") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210921212102.30803-1-broonie@kernel.orgSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Arnd Bergmann authored
Configurations with both CONFIG_FB_SIMPLE=y and CONFIG_DRM_SIMPLEDRM=m are allowed by Kconfig because the 'depends on !DRM_SIMPLEDRM' dependency does not disallow FB_SIMPLE as long as SIMPLEDRM is not built-in. This can however result in a build failure when cfb_fillrect() etc are then also in loadable modules: x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x1f8): undefined reference to `cfb_fillrect' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x200): undefined reference to `cfb_copyarea' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x208): undefined reference to `cfb_imageblit' To work around this, change FB_SIMPLE to be a 'tristate' symbol, which still allows both to be =m together, but not one of them to be =y if the other one is =m. If a distro kernel picks this configuration, it can be determined by local policy which of the two modules gets loaded. The 'of_chosen' export is needed as this is the first loadable module referencing it. Alternatively, the Kconfig dependency could be changed to 'depends on DRM_SIMPLEDRM=n', which would forbid the configuration with both drivers. Fixes: 11e8f5fd ("drm: Add simpledrm driver") Acked-by: Rob Herring <robh@kernel.org> # for drivers/of/ Link: https://lore.kernel.org/all/20210721151839.2484245-1-arnd@kernel.org/Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Cc: Maxime Ripard <maxime@cerno.tech> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Borislav Petkov <bp@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Peter Collingbourne <pcc@google.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v5.14+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210928145243.1098064-1-arnd@kernel.orgSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Christophe Branchereau authored
The previous parameters caused an unbalanced yellow tint. Fixes: 7467389b ("drm/panel: Add ABT Y030XX067A 3.0" 320x480 panel") Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> [Paul: Add Fixes: tag, and fix case and punctuation in commit message] Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210914092716.2370039-1-cbranchereau@gmail.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Krzysztof Kozlowski authored
Correct indentation warning: ilitek,ili9341.yaml:25:9: [warning] wrong indentation: expected 10 but found 8 (indentation) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210819101020.26368-1-krzysztof.kozlowski@canonical.com (cherry picked from commit 333ba0d9) Link: https://lore.kernel.org/dri-devel/CAL_JsqKcTfgnXNYzGDSFhKS2udhw2Dvk04ODwTxUdDRQjKdT0Q@mail.gmail.com/Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ben Skeggs authored
Turns out caller isn't zero-initialised after-all. Fixes: 49b2dfc0 ("drm/nouveau/ga102-: support ttm buffer moves via copy engine") Reported-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210921090735.247236-1-skeggsb@gmail.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Chris Morgan authored
After commit 928f9e26 ("clk: fractional-divider: Hide clk_fractional_divider_ops from wide audience") was merged it appears that the DSI panel on my Odroid Go Advance stopped working. Upon closer examination of the problem, it looks like it was the fixup in the rockchip_drm_vop.c file was causing the issue. The changes made to the clk driver appear to change some assumptions made in the fixup. After debugging the working 5.14 kernel and the no-longer working 5.15 kernel, it looks like this was broken all along but still worked, whereas after the fractional clock change it stopped working despite the issue (it went from sort-of broken to very broken). In the 5.14 kernel the dclk_vopb_frac was being requested to be set to 17000999 on my board. The clock driver was taking the value of the parent clock and attempting to divide the requested value from it (17000000/17000999 = 0), then subtracting 1 from it (making it -1), and running it through fls_long to get 64. It would then subtract the value of fd->mwidth from it to get 48, and then bit shift 17000999 to the left by 48, coming up with a very large number of 7649082492112076800. This resulted in a numerator of 65535 and a denominator of 1 from the clk driver. The driver seemingly would try again and get a correct 1:1 value later, and then move on. Output from my 5.14 kernel (with some printfs for good measure): [ 2.830066] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.839431] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.855980] Clock is dclk_vopb_frac [ 2.856004] Scale 64, Rate 7649082492112076800, Oldrate 17000999, Parent Rate 17000000, Best Numerator 65535, Best Denominator 1, fd->mwidth 16 [ 2.903529] Clock is dclk_vopb_frac [ 2.903556] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 [ 2.903579] Clock is dclk_vopb_frac [ 2.903583] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 Contrast this with 5.15 after the clk change where the rate of 17000999 was getting passed and resulted in numerators/denomiators of 17001/ 17000. Output from my 5.15 kernel (with some printfs added for good measure): [ 2.817571] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.826975] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.843430] Rate 17000999, Parent Rate 17000000, Best Numerator 17018, Best Denominator 17017 [ 2.891073] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891269] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891281] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 I have tested the change extensively on my Odroid Go Advance (Rockchip RK3326) and it appears to work well. However, this change will affect all Rockchip SoCs that use this driver so I believe further testing is warranted. Please note that without this change I can confirm at least all PX30s with DSI panels will stop working with the 5.15 kernel. Upon advice from Doug Anderson <dianders@chromium.org> it was decided that we would first check if the clock rate can be set exactly as requested, and only if it could not would we then add 999 to it and attempt the process again. This way we can preserve the behavior for clocks that still need it while resolving the specific issue for the PX30 and DSI panels (since it is using a fractional clock). Changes since v2: - Moved fixes to correct location. Changes since v1: - Made the addition of 999 conditional based on whether the clock subsystem can set the actual clock rate as requested. - Updated the notes in the fixup routine to reflect this new behavior. - Added reference to original commit, as this has technically been broken since then however only now is it an issue due to the clock changes. Fixes: 4e7cf74f ("clk: fractional-divider: Export approximation algorithm to the CCF users") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210916202907.18394-1-macroalpha82@gmail.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ben Skeggs authored
We don't currently have any kind of real acceleration on Ampere GPUs, but the TTM memcpy() fallback paths aren't really designed to handle copies between different devices, such as on Optimus systems, and result in a kernel OOPS. A few options were investigated to try and fix this, but didn't work out, and likely would have resulted in a very unpleasant experience for users anyway. This commit adds just enough support for setting up a single channel connected to a copy engine, which the kernel can use to accelerate the buffer copies between devices. Userspace has no access to this incomplete channel support, but it's suitable for TTM's needs. A more complete implementation of host(fifo) for Ampere GPUs is in the works, but the required changes are far too invasive that they would be unsuitable to backport to fix this issue on current kernels. v2: fix GPFIFO length in RAMFC (reported by Karol) Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: <stable@vger.kernel.org> # v5.12+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Tested-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916220406.666454-1-skeggsb@gmail.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ben Skeggs authored
Prevent NVD core channel error code 67 occuring and hanging display, managed to reproduce on GA102 while testing suspend/resume scenarios. Required extension of earlier commit to fix interactions with EFI. Fixes: e78b1b54 ("drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: <stable@vger.kernel.org> # v5.12+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210906005628.11499-2-skeggsb@gmail.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Jernej Skrabec authored
Recent rework, which made HDMI PHY driver a platform device, inadvertely reversed clock setup order. HW is very touchy about it. Proper way is to handle controllers resets and clocks first and HDMI PHYs second. Currently, without this fix, first mode set completely fails (nothing on HDMI monitor) on H3 era PHYs. On H6, it still somehow work. Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which will assure that code is executed after controllers reset & clocks are handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit them at controllers driver unload. Tested on A64, H3, H6 and R40. Fixes: 9bf37977 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.comSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Maxime Ripard authored
Commitc7d30623 ("drm/vc4: hdmi: Remove unused struct") removed the references to the vc4_hdmi_audio_widgets and vc4_hdmi_audio_routes structures, but not the structures themselves resulting in two warnings. Remove it. Fixes: c7d30623 ("drm/vc4: hdmi: Remove unused struct") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210819140753.930751-1-maxime@cerno.techSigned-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Edmund Dea authored
Enable one additional plane that is alpha blended on top of the primary plane. This also fixes the below warnings when building with -Warray-bounds: drivers/gpu/drm/kmb/kmb_plane.c:135:20: warning: array subscript 3 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:132:20: warning: array subscript 2 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:129:20: warning: array subscript 1 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] v2: corrected previous patch dependecies so it builds Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.kernel.org/project/dri-devel/patch/20210728003126.1425028-13-anitha.chrisanthus@intel.com/Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
- 05 Oct, 2021 15 commits
-
-
Guchun Chen authored
In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen. Fixes: c9a6b82f ("drm/amdgpu: Implement DPC recovery") Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yifan Zhang authored
This patch is to fix clinfo failure in Raven/Picasso: Number of platforms: 1 Platform Profile: FULL_PROFILE Platform Version: OpenCL 2.2 AMD-APP (3364.0) Platform Name: AMD Accelerated Parallel Processing Platform Vendor: Advanced Micro Devices, Inc. Platform Extensions: cl_khr_icd cl_amd_event_callback Platform Name: AMD Accelerated Parallel Processing Number of devices: 0 Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yifan Zhang authored
kfd_resume doesn't involve iommu operation, remove redundant iommu cleanup code. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Lijo Lazar authored
In the rare event when GFX IP suspend coincides with a s0ix entry, don't schedule a delayed work, instead signal PMFW immediately to allow GFXOFF entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be signaled about GFXOFF status before amd-pmc module passes OS HINT to PMFW telling that everything is ready for a safe s0ix entry. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
Not sure why that was there. Remove it. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Lang Yu authored
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it! Fixes: 264fb4d3 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Jude Shih authored
[Why] YELLOW_CARP_B0 address was not correct [How] Set YELLOW_CARP_B0 to 0x1A. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Jude Shih <shenshih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Liu, Zhan authored
[Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit 4b7786d8)
-
Liu, Zhan authored
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit bdd1a21b)
-
Ville Syrjälä authored
Looks like skl/bxt/derivatives also need the plane stride stretch w/a when using async flips and VT-d is enabled, or else we get corruption on screen. To my surprise this was even documented in bspec, but only as a note on the CHICHKEN_PIPESL register description rather than on the w/a list. So very much the same thing as on HSW/BDW, except the bits moved yet again. Cc: stable@vger.kernel.org Cc: Karthik B S <karthik.b.s@intel.com> Fixes: 55ea1cb1 ("drm/i915: Enable async flips in i915") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210930190943.17547-1-ville.syrjala@linux.intel.comReviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit d08df3b0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Lukasz Majczak authored
With patch "drm/i915/vbt: Fix backlight parsing for VBT 234+" the size of bdb_lfp_backlight_data structure has been increased, causing if-statement in the parse_lfp_backlight function that comapres this structure size to the one retrieved from BDB, always to fail for older revisions. This patch calculates expected size of the structure for a given BDB version and compares it with the value gathered from BDB. Tested on Chromebook Pixelbook (Nocturne) (reports bdb->version = 221) Fixes: d381baad ("drm/i915/vbt: Fix backlight parsing for VBT 234+") Tested-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Majczak <lma@semihalf.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210930134606.227234-1-lma@semihalf.com (cherry picked from commit 4378daf5) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Imre Deak authored
Atm during driver loading and system resume TypeC ports are accessed before their HW/SW state is synced. Move the TypeC port sanitization to the encoder's sync_state hook to fix this. v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well (Jose, Jani) Fixes: f9e76a6e ("drm/i915: Add an encoder hook to sanitize its state during init/resume") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-1-imre.deak@intel.com (cherry picked from commit 7194dc99) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Maarten Lankhorst authored
We forgot to call intel_runtime_pm_put on error, fix it! Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: cf41a8f1 ("drm/i915: Finally remove obj->mm.lock.") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v5.13+ Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-9-maarten.lankhorst@linux.intel.com (cherry picked from commit 239f3c2e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
Kai-Heng Feng authored
Commit 989634fb ("drm/i915/audio: set HDA link parameters in driver") makes HDMI audio on Lenovo P350 disappear. So in addition to TGL, extend the logic to RKL to use BIOS provided value to fix the regression. Fixes: 989634fb ("drm/i915/audio: set HDA link parameters in driver") Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210906041300.508458-1-kai.heng.feng@canonical.com (cherry picked from commit c6b40ee3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
- 03 Oct, 2021 4 commits
-
-
Linus Torvalds authored
-
Chen Jingwen authored
In commit b212921b ("elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings") we still leave MAP_FIXED_NOREPLACE in place for load_elf_interp. Unfortunately, this will cause kernel to fail to start with: 1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already Failed to execute /init (error -17) The reason is that the elf interpreter (ld.so) has overlapping segments. readelf -l ld-2.31.so Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000002c94c 0x000000000002c94c R E 0x10000 LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0 0x00000000000021e8 0x0000000000002320 RW 0x10000 LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00 0x00000000000011ac 0x0000000000001328 RW 0x10000 The reason for this problem is the same as described in commit ad55eac7 ("elf: enforce MAP_FIXED on overlaying elf segments"). Not only executable binaries, elf interpreters (e.g. ld.so) can have overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go back to MAP_FIXED in load_elf_interp. Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") Cc: <stable@vger.kernel.org> # v4.19 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix a number of ext4 bugs in fast_commit, inline data, and delayed allocation. Also fix error handling code paths in ext4_dx_readdir() and ext4_fill_super(). Finally, avoid a grabbing a journal head in the delayed allocation write in the common cases where we are overwriting a pre-existing block or appending to an inode" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: recheck buffer uptodate bit under buffer lock ext4: fix potential infinite loop in ext4_dx_readdir() ext4: flush s_error_work before journal destroy in ext4_fill_super ext4: fix loff_t overflow in ext4_max_bitmap_size() ext4: fix reserved space counter leakage ext4: limit the number of blocks in one ADD_RANGE TLV ext4: enforce buffer head state assertion in ext4_da_map_blocks ext4: remove extent cache entries when truncating inline data ext4: drop unnecessary journal handle in delalloc write ext4: factor out write end code of inline file ext4: correct the error path of ext4_write_inline_data_end() ext4: check and update i_disksize properly ext4: add error checking to ext4_ext_replay_set_iblocks()
-
Linus Torvalds authored
The objtool warning that the kvm instruction emulation code triggered wasn't very useful: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception in that it helpfully tells you which symbol name it had trouble figuring out the relocation for, but it doesn't actually say what the unknown symbol type was that triggered it all. In this case it was because of missing type information (type 0, aka STT_NOTYPE), but on the whole it really should just have printed that out as part of the message. Because if this warning triggers, that's very much the first thing you want to know - why did reloc2sec_off() return failure for that symbol? So rather than just saying you can't handle some type of symbol without saying what the type _was_, just print out the type number too. Fixes: 24ff6525 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-