- 13 Oct, 2018 3 commits
-
-
Jérôme Glisse authored
Inside set_pmd_migration_entry() we are holding page table locks and thus we can not sleep so we can not call invalidate_range_start/end() So remove call to mmu_notifier_invalidate_range_start/end() because they are call inside the function calling set_pmd_migration_entry() (see try_to_unmap_one()). Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.comSigned-off-by: Jérôme Glisse <jglisse@redhat.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
Daniel Micay reports that attempting to use MAP_FIXED_NOREPLACE in an application causes that application to randomly crash. The existing check for handling MAP_FIXED_NOREPLACE looks up the first VMA that either overlaps or follows the requested region, and then bails out if that VMA overlaps *the start* of the requested region. It does not bail out if the VMA only overlaps another part of the requested region. Fix it by checking that the found VMA only starts at or after the end of the requested region, in which case there is no overlap. Test case: user@debian:~$ cat mmap_fixed_simple.c #include <sys/mman.h> #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #ifndef MAP_FIXED_NOREPLACE #define MAP_FIXED_NOREPLACE 0x100000 #endif int main(void) { char *p; errno = 0; p = mmap((void*)0x10001000, 0x4000, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0); printf("p1=%p err=%m\n", p); errno = 0; p = mmap((void*)0x10000000, 0x2000, PROT_READ, MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0); printf("p2=%p err=%m\n", p); char cmd[100]; sprintf(cmd, "cat /proc/%d/maps", getpid()); system(cmd); return 0; } user@debian:~$ gcc -o mmap_fixed_simple mmap_fixed_simple.c user@debian:~$ ./mmap_fixed_simple p1=0x10001000 err=Success p2=0x10000000 err=Success 10000000-10002000 r--p 00000000 00:00 0 10002000-10005000 ---p 00000000 00:00 0 564a9a06f000-564a9a070000 r-xp 00000000 fe:01 264004 /home/user/mmap_fixed_simple 564a9a26f000-564a9a270000 r--p 00000000 fe:01 264004 /home/user/mmap_fixed_simple 564a9a270000-564a9a271000 rw-p 00001000 fe:01 264004 /home/user/mmap_fixed_simple 564a9a54a000-564a9a56b000 rw-p 00000000 00:00 0 [heap] 7f8eba447000-7f8eba5dc000 r-xp 00000000 fe:01 405885 /lib/x86_64-linux-gnu/libc-2.24.so 7f8eba5dc000-7f8eba7dc000 ---p 00195000 fe:01 405885 /lib/x86_64-linux-gnu/libc-2.24.so 7f8eba7dc000-7f8eba7e0000 r--p 00195000 fe:01 405885 /lib/x86_64-linux-gnu/libc-2.24.so 7f8eba7e0000-7f8eba7e2000 rw-p 00199000 fe:01 405885 /lib/x86_64-linux-gnu/libc-2.24.so 7f8eba7e2000-7f8eba7e6000 rw-p 00000000 00:00 0 7f8eba7e6000-7f8eba809000 r-xp 00000000 fe:01 405876 /lib/x86_64-linux-gnu/ld-2.24.so 7f8eba9e9000-7f8eba9eb000 rw-p 00000000 00:00 0 7f8ebaa06000-7f8ebaa09000 rw-p 00000000 00:00 0 7f8ebaa09000-7f8ebaa0a000 r--p 00023000 fe:01 405876 /lib/x86_64-linux-gnu/ld-2.24.so 7f8ebaa0a000-7f8ebaa0b000 rw-p 00024000 fe:01 405876 /lib/x86_64-linux-gnu/ld-2.24.so 7f8ebaa0b000-7f8ebaa0c000 rw-p 00000000 00:00 0 7ffcc99fa000-7ffcc9a1b000 rw-p 00000000 00:00 0 [stack] 7ffcc9b44000-7ffcc9b47000 r--p 00000000 00:00 0 [vvar] 7ffcc9b47000-7ffcc9b49000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] user@debian:~$ uname -a Linux debian 4.19.0-rc6+ #181 SMP Wed Oct 3 23:43:42 CEST 2018 x86_64 GNU/Linux user@debian:~$ As you can see, the first page of the mapping at 0x10001000 was clobbered. Link: http://lkml.kernel.org/r/20181010152736.99475-1-jannh@google.com Fixes: a4ff8e86 ("mm: introduce MAP_FIXED_NOREPLACE") Signed-off-by: Jann Horn <jannh@google.com> Reported-by: Daniel Micay <danielmicay@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
zhong jiang authored
Fix the following compile warning: fs/ocfs2/dlmglue.c:99:30: warning: lockdep_keys defined but not used [-Wunused-variable] static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES]; Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.comSigned-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 Oct, 2018 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socGreg Kroah-Hartman authored
Arnd writes: "ARM: SoC fixes for 4.19 Two last minute bugfixes, both for NXP platforms: * The Layerscape 'qbman' infrastructure suffers from probe ordering bugs in some configurations, a two-patch series adds a hotfix for this. 4.20 will have a longer set of patches to rework it. * The old imx53-qsb board regressed in 4.19 after the addition of cpufreq support, adding a set of explicit operating points fixes this." * tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: fsl: qman_portals: defer probe after qman's probe soc: fsl: qbman: add APIs to retrieve the probing status ARM: dts: imx53-qsb: disable 1.2GHz OPP
-
David Howells authored
Fix a leak of afs_server structs. The routine that installs them in the various lookup lists and trees gets a ref on leaving the function, whether it added the server or a server already exists. It shouldn't increment the refcount if it added the server. The effect of this that "rmmod kafs" will hang waiting for the leaked server to become unused. Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Rosin authored
Just drop the "linux" part of the path, it was never correct. Reported-by: Joe Perches <joe@perches.com> Fixes: 256ac037 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Rosin authored
The file is GPL v2 or later. Acked-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
Access to the list of cells by /proc/net/afs/cells has a couple of problems: (1) It should be checking against SEQ_START_TOKEN for the keying the header line. (2) It's only holding the RCU read lock, so it can't just walk over the list without following the proper RCU methods. Fix these by using an hlist instead of an ordinary list and using the appropriate accessor functions to follow it with RCU. Since the code that adds a cell to the list must also necessarily change, sort the list on insertion whilst we're at it. Fixes: 989782dc ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcGreg Kroah-Hartman authored
Ulf writes: "MMC core: - Avoid fragile multiblock reads for the last sector in SPI mode WIFI/SDIO: - libertas: Fixup suspend sequence for the SDIO card" * tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: libertas: call into generic suspend code before turning off power mmc: block: avoid multiblock reads for the last sector in SPI mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioGreg Kroah-Hartman authored
Linus writes: "GPIO fix for the v4.19 series: - Fix up the interrupt parent for the irqdomains." * tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Assign gpio_irq_chip::parents to non-stack pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlGreg Kroah-Hartman authored
Linus writes: "pin control fix for v4.19: A single pin control fix for v4.19: - Interrupt setup in the MCP23S08 driver." * tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: mcp23s08: fix irq and irqchip setup order
-
git://git.infradead.org/linux-mtdGreg Kroah-Hartman authored
Boris writes: "mdt: fix for 4.19-rc8 * Fix a stack overflow in lib/bch.c" * tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd: lib/bch: fix possible stack overrun
-
git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman authored
Dave writes: "drm fixes for 4.19-rc8 single nouveau runtime reference and mst change" * tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaGreg Kroah-Hartman authored
Doug writes: "RDMA fixes: Final for-rc pull request for 4.19 We only have one bug to submit this time around. It fixes a DMA unmap issue where we unmapped the DMA address from the IOMMU before we did from the card, resulting in a DMAR error with IOMMU enabled, or possible crash without." * tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Unmap DMA addr from HCA before IOMMU
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputGreg Kroah-Hartman authored
Dmitry writes: "Input updates for v4.19-rc7 - we added a few scheduling points into various input interfaces to ensure that large writes will not cause RCU stalls - fixed configuring PS/2 keyboards as wakeup devices on newer platforms - added a new Xbox gamepad ID." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - add a schedule point in uinput_inject_events() Input: evdev - add a schedule point in evdev_write() Input: mousedev - add a schedule point in mousedev_write() Input: i8042 - enable keyboard wakeups by default when s2idle is used Input: xpad - add support for Xbox1 PDP Camo series gamepad
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixesGreg Kroah-Hartman authored
Stephen writes: "A couple of warning fixes: Two fixes from Peter Oberparleiter <oberpar@linux.ibm.com>: Commit 6b7dca40 ("tracing: Allow gcov profiling on only ftrace subsystem") uncovered linker problems when using gcov kernel profiling on some architectures. These problems were likely introduced earlier, and are possibly related to compiler changes." * tag 'next-fixes-20181012' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes: vmlinux.lds.h: Fix linker warnings about orphan .LPBX sections vmlinux.lds.h: Fix incomplete .text.exit discards
-
Arnd Bergmann authored
The previous patch introduced very large kernel stack usage and a Makefile change to hide the warning about it. From what I can tell, a number of things went wrong here: - The BCH_MAX_T constant was set to the maximum value for 'n', not the maximum for 't', which is much smaller. - The stack usage is actually larger than the entire kernel stack on some architectures that can use 4KB stacks (m68k, sh, c6x), which leads to an immediate overrun. - The justification in the patch description claimed that nothing changed, however that is not the case even without the two points above: the configuration is machine specific, and most boards never use the maximum BCH_ECC_WORDS() length but instead have something much smaller. That maximum would only apply to machines that use both the maximum block size and the maximum ECC strength. The largest value for 't' that I could find is '32', which in turn leads to a 60 byte array instead of 2048 bytes. Making it '64' for future extension seems also worthwhile, with 120 bytes for the array. Anything larger won't fit into the OOB area on NAND flash. With that changed, the warning can be enabled again. Only linux-4.19+ contains the breakage, so this is only needed as a stable backport if it does not make it into the release. Fixes: 02361bc7 ("lib/bch: Remove VLA usage") Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman authored
David writes: "Networking 1) RXRPC receive path fixes from David Howells. 2) Re-export __skb_recv_udp(), from Jiri Kosina. 3) Fix refcounting in u32 classificer, from Al Viro. 4) Userspace netlink ABI fixes from Eugene Syromiatnikov. 5) Don't double iounmap on rmmod in ena driver, from Arthur Kiyanovski. 6) Fix devlink string attribute handling, we must pull a copy into a kernel buffer if the lifetime extends past the netlink request. From Moshe Shemesh. 7) Fix hangs in RDS, from Ka-Cheong Poon. 8) Fix recursive locking lockdep warnings in tipc, from Ying Xue. 9) Clear RX irq correctly in socionext, from Ilias Apalodimas. 10) bcm_sf2 fixes from Florian Fainelli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net: dsa: bcm_sf2: Call setup during switch resume net: dsa: bcm_sf2: Fix unbind ordering net: phy: sfp: remove sfp_mutex's definition r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips net: socionext: clear rx irq correctly net/mlx4_core: Fix warnings during boot on driverinit param set failures tipc: eliminate possible recursive locking detected by LOCKDEP selftests: udpgso_bench.sh explicitly requires bash selftests: rtnetlink.sh explicitly requires bash. qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface tipc: queue socket protocol error messages into socket receive buffer tipc: set link tolerance correctly in broadcast link net: ipv4: don't let PMTU updates increase route MTU net: ipv4: update fnhe_pmtu when first hop's MTU changes net/ipv6: stop leaking percpu memory in fib6 info rds: RDS (tcp) hangs on sendto() to unresponding address net: make skb_partial_csum_set() more robust against overflows devlink: Add helper function for safely copy string param devlink: Fix param cmode driverinit for string type devlink: Fix param set handling for string type ...
-
- 11 Oct, 2018 22 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple of fixes Here are two fixes for the bcm_sf2 driver that were found during testing unbind and analysing another issue during system suspend/resume. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa9498 ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023 ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Oberparleiter authored
Enabling both CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y and CONFIG_GCOV_PROFILE_ALL=y results in linker warnings: warning: orphan section `.data..LPBX1' being placed in section `.data..LPBX1'. LD_DEAD_CODE_DATA_ELIMINATION adds compiler flag -fdata-sections. This option causes GCC to create separate data sections for data objects, including those generated by GCC internally for gcov profiling. The names of these objects start with a dot (.LPBX0, .LPBX1), resulting in section names starting with 'data..'. As section names starting with 'data..' are used for specific purposes in the Linux kernel, the linker script does not automatically include them in the output data section, resulting in the "orphan section" linker warnings. Fix this by specifically including sections named "data..LPBX*" in the data section. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Peter Oberparleiter authored
Enabling CONFIG_GCOV_PROFILE_ALL=y causes linker errors on ARM: `.text.exit' referenced in section `.ARM.exidx.text.exit': defined in discarded section `.text.exit' `.text.exit' referenced in section `.fini_array.00100': defined in discarded section `.text.exit' And related errors on NDS32: `.text.exit' referenced in section `.dtors.65435': defined in discarded section `.text.exit' The gcov compiler flags cause certain compiler versions to generate additional destructor-related sections that are not yet handled by the linker script, resulting in references between discarded and non-discarded sections. Since destructors are not used in the Linux kernel, fix this by discarding these additional sections. Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Greentime Hu <green.hu@gmail.com> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Sebastian Andrzej Siewior authored
The sfp_mutex variable is defined but never used in this file. Not even in the commit that introduced that variable. Remove sfp_mutex, it has no purpose. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maciej S. Szmigiero authored
It has been reported that since commit 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from suspend. The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig register. We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36 and RTL_GIGA_MAC_VER_38. Curiously, the NIC seems to work fine after a system boot without having this bit set as long as the system isn't suspended and resumed. Fixes: 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") Reported-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilias Apalodimas authored
commit 63ae7949 ("net: socionext: Use descriptor info instead of MMIO reads on Rx") removed constant mmio reads from the driver and started using a descriptor field to check if packet should be processed. This lead the napi rx handler being constantly called while no packets needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read to clear the irq correcty after processing packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Moshe Shemesh authored
During boot, mlx4_core sets the driverinit configuration parameters and updates the devlink module on the initial values calling devlink_param_driverinit_value_set(). If devlink_param_driverinit_value_set() returns an error mlx4_core reports kernel module warning. This caused false alarm during boot in case kernel was compiled with CONFIG_NET_DEVLINK off. Fix by removing warning reported in case devlink_param_driverinit_value_set() fails. This actually makes the function mlx4_devlink_set_init_value() redundant to using directly devlink_param_driverinit_value_set() and so removed. It fixes the following kernel trace: mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95) Fixes: bd1b51dc ("mlx4: Add mlx4 initial parameters table and register it") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupGreg Kroah-Hartman authored
Tejun writes: "cgroup fixes for v4.19-rc7 One cgroup2 threaded mode fix for v4.19-rc7. While threaded mode isn't used widely (yet) and the bug requires somewhat convoluted sequence of operations, it causes a userland visible malfunction - EINVAL on a valid attempt to enable threaded mode. This pull request contains the fix" * 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Fix dom_cgrp propagation when enabling threaded mode
-
Ying Xue authored
When booting kernel with LOCKDEP option, below warning info was found: WARNING: possible recursive locking detected 4.19.0-rc7+ #14 Not tainted -------------------------------------------- swapper/0/1 is trying to acquire lock: 00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] 00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850 but task is already holding lock: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&list->lock)->rlock#4); lock(&(&list->lock)->rlock#4); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by swapper/0/1: #0: 00000000f7539d34 (pernet_ops_rwsem){+.+.}, at: register_pernet_subsys+0x19/0x40 net/core/net_namespace.c:1051 #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849 stack backtrace: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7+ #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1af/0x295 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1759 [inline] check_deadlock kernel/locking/lockdep.c:1803 [inline] validate_chain kernel/locking/lockdep.c:2399 [inline] __lock_acquire+0xf1e/0x3c60 kernel/locking/lockdep.c:3411 lock_acquire+0x1db/0x520 kernel/locking/lockdep.c:3900 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850 tipc_link_bc_create+0xb5/0x1f0 net/tipc/link.c:526 tipc_bcast_init+0x59b/0xab0 net/tipc/bcast.c:521 tipc_init_net+0x472/0x610 net/tipc/core.c:82 ops_init+0xf7/0x520 net/core/net_namespace.c:129 __register_pernet_operations net/core/net_namespace.c:940 [inline] register_pernet_operations+0x453/0xac0 net/core/net_namespace.c:1011 register_pernet_subsys+0x28/0x40 net/core/net_namespace.c:1052 tipc_init+0x83/0x104 net/tipc/core.c:140 do_one_initcall+0x109/0x70a init/main.c:885 do_initcall_level init/main.c:953 [inline] do_initcalls init/main.c:961 [inline] do_basic_setup init/main.c:979 [inline] kernel_init_freeable+0x4bd/0x57f init/main.c:1144 kernel_init+0x13/0x180 init/main.c:1063 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413 The reason why the noise above was complained by LOCKDEP is because we nested to hold l->wakeupq.lock and l->inputq->lock in tipc_link_reset function. In fact it's unnecessary to move skb buffer from l->wakeupq queue to l->inputq queue while holding the two locks at the same time. Instead, we can move skb buffers in l->wakeupq queue to a temporary list first and then move the buffers of the temporary list to l->inputq queue, which is also safe for us. Fixes: 3f32d0be ("tipc: lock wakeup & inputq at tipc_link_reset()") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Greg Kroah-Hartman authored
Merge tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Masahiro writes: "Kbuild fixes for v4.19 (2nd) - Fix warnings from recordmcount.pl when building with Clang - Allow Clang to use GNU toolchains correctly - Disable CONFIG_SAMPLES for UML to avoid build error" * tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: samples: disable CONFIG_SAMPLES for UML kbuild: allow to use GCC toolchain not in Clang search path ftrace: Build with CPPFLAGS to get -Qunused-arguments
-
David S. Miller authored
Paolo Abeni says: ==================== net: explicitly requires bash when needed. Some test scripts require bash-only features but use the default shell. This may cause random failures if the default shell is not bash. Instead of doing a potentially complex rewrite of such scripts, these patches require the bash interpreter, where needed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
The udpgso_bench.sh script requires several bash-only features. This may cause random failures if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter Fixes: 3a687bef ("selftests: udp gso benchmark") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
the script rtnetlink.sh requires a bash-only features (sleep with sub-second precision). This may cause random test failure if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter. Fixes: 33b01b7b ("selftests: add rtnetlink test script") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxGreg Kroah-Hartman authored
Kees writes: "Fix open-coded multiplication arguments to allocators - Fixes several new open-coded multiplications added in the 4.19 merge window." * tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Replace more open-coded allocation size multiplications
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Ingo writes: "x86 fixes An intel_rdt memory access fix and a VLA fix in pgd_alloc()." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Avoid VLA in pgd_alloc() x86/intel_rdt: Fix out-of-bounds memory access in CBM tests
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Ingo writes: "scheduler fix: Cleanup of dead code left over from the recent sched/numa fixes." * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm, sched/numa: Remove remaining traces of NUMA rate-limiting
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipGreg Kroah-Hartman authored
Ingo, a man of few words, writes: "perf fixes: misc perf tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf record: Use unmapped IP for inline callchain cursors perf python: Use -Wno-redundant-decls to build with PYTHON=python3 perf report: Don't try to map ip to invalid map perf script python: Fix export-to-sqlite.py sample columns perf script python: Fix export-to-postgresql.py occasional failure
-
Giacinto Cifelli authored
Added support for Gemalto's Cinterion ALASxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Parthasarathy Bhuvaragan authored
In tipc_sk_filter_rcv(), when we detect protocol messages with error we call tipc_sk_conn_proto_rcv() and let it reset the connection and notify the socket by calling sk->sk_state_change(). However, tipc_sk_filter_rcv() may have been called from the function tipc_backlog_rcv(), in which case the socket lock is held and the socket already awake. This means that the sk_state_change() call is ignored and the error notification lost. Now the receive queue will remain empty and the socket sleeps forever. In this commit, we convert the protocol message into a connection abort message and enqueue it into the socket's receive queue. By this addition to the above state change we cover all conditions. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
In the patch referred to below we added link tolerance as an additional criteria for declaring broadcast transmission "stale" and resetting the affected links. However, the 'tolerance' field of the broadcast link is never set, and remains at zero. This renders the whole commit without the intended improving effect, but luckily also with no negative effect. In this commit we add the missing initialization. Fixes: a4dc70d4 ("tipc: extend link reset criteria for stale packet retransmission") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-