- 16 Mar, 2023 5 commits
-
-
Moshe Shemesh authored
When shutdown or remove callbacks are called the driver sets the flag MLX5_BREAK_FW_WAIT, to stop waiting for FW as teardown was called. There is no need to clear the bit as once shutdown or remove were called as there is no way back, the driver is going down. Furthermore, if not cleared the flag can be used also in other loops where we may wait while teardown was already called. Use test_bit() instead of test_and_clear_bit() as there is no need to clear the flag. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-2-saeed@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Wolfram Sang authored
'temp' was used before commit c0c99d0c ("net: phy: micrel: remove the use of .ack_interrupt()") refactored the code. Now, we can simplify it a little. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230314124928.44948-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Wolfram Sang authored
Commit 899a3cbb ("net: phy: remove states PHY_STARTING and PHY_PENDING") missed to update a comment in phy_probe. Remove superfluous "Description:" prefix while we are here. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20230314124856.44878-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== ice: refactor mailbox overflow detection Jake Keller says: The primary motivation of this series is to cleanup and refactor the mailbox overflow detection logic such that it will work with Scalable IOV. In addition a few other minor cleanups are done while I was working on the code in the area. First, the mailbox overflow functions in ice_vf_mbx.c are refactored to store the data per-VF as an embedded structure in struct ice_vf, rather than stored separately as a fixed-size array which only works with Single Root IOV. This reduces the overall memory footprint when only a handful of VFs are used. The overflow detection functions are also cleaned up to reduce the need for multiple separate calls to determine when to report a VF as potentially malicious. Finally, the ice_is_malicious_vf function is cleaned up and moved into ice_virtchnl.c since it is not Single Root IOV specific, and thus does not belong in ice_sriov.c I could probably have done this in fewer patches, but I split pieces out to hopefully aid in reviewing the overall sequence of changes. This does cause some additional thrash as it results in intermediate versions of the refactor, but I think its worth it for making each step easier to understand. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg() ice: move ice_is_malicious_vf() to ice_virtchnl.c ice: print message if ice_mbx_vf_state_handler returns an error ice: pass mbxdata to ice_is_malicious_vf() ice: remove unnecessary &array[0] and just use array ice: always report VF overflowing mailbox even without PF VSI ice: declare ice_vc_process_vf_msg in ice_virtchnl.h ice: initialize mailbox snapshot earlier in PF init ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handler ice: remove ice_mbx_deinit_snapshot ice: move VF overflow message count into struct ice_mbx_vf_info ice: track malicious VFs in new ice_mbx_vf_info structure ice: convert ice_mbx_clear_malvf to void and use WARN ice: re-order ice_mbx_reset_snapshot function ==================== Link: https://lore.kernel.org/r/20230313182123.483057-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/ptp/ptp_ines.c:783:34: error: ‘ines_ptp_ctrl_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230312132637.352755-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
- 15 Mar, 2023 30 commits
-
-
Alexander Mikhalitsyn authored
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS. For some reason we have no corresponding check for SO_PASSSEC. In the recvmsg(2) doc we have: MSG_CTRUNC indicates that some control data was discarded due to lack of space in the buffer for ancillary data. So, we need to set MSG_CTRUNC flag for all types of SCM. This change can break applications those don't check MSG_CTRUNC flag. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> v2: - commit message was rewritten according to Eric's suggestion Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Wenjia Zhang says: ==================== smc: Updates 2023-03-01 The 1st patch is to make implements later do not need to adhere to a specific SEID format. The 2nd patch does some cleanup. ==================== Signed-off-by: -
Stefan Raspl authored
Signed-off-by:
Stefan Raspl <raspl@linux.ibm.com> Signed-off-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Stefan Raspl authored
Previously, v2 support was derived from a very specific format of the SEID as part of the SMC-D codebase. Make this part of the SMC-D device API, so implementers do not need to adhere to a specific SEID format. Signed-off-by:
Jan Karcher <jaka@linux.ibm.com> Reviewed-by:
-
Josef Miegl authored
The GENEVE tunnel used with IFLA_GENEVE_INNER_PROTO_INHERIT is point-to-point, so set IFF_POINTOPOINT to reflect that. Signed-off-by:
Josef Miegl <josef@miegl.cz> Reviewed-by:
-
Krzysztof Kozlowski authored
Core already sets owner in spi_driver. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Core already sets owner in spi_driver. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/ca8210.c:3174:34: error: ‘ca8210_of_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/at86rf230.c:1644:34: error: ‘at86rf230_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/mcr20a.c:1340:34: error: ‘mcr20a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/adf7242.c:1322:34: error: ‘adf7242_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/phy/spi_ks8995.c:156:34: error: ‘ks8895_spi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/ocelot/ocelot_ext.c:143:34: error: ‘ocelot_ext_switch_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/microchip/ksz9477_i2c.c:84:34: error: ‘ksz9477_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/ocelot/seville_vsc9953.c:1070:34: error: ‘seville_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly or only by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/lan9303_i2c.c:97:34: error: ‘lan9303_i2c_of_match’ defined but not used [-Werror=unused-const-variable=] drivers/net/dsa/lan9303_mdio.c:157:34: error: ‘lan9303_mdio_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/net/dsa/lantiq_gswip.c:1888:34: error: ‘xway_gphy_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/nfc/trf7970a.c:2232:34: error: ‘trf7970a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Mark Greer <mgreer@animalcreek.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/ni/nixge.c:1253:34: error: ‘nixge_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:220:34: error: ‘sxgbe_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/marvell/pxa168_eth.c:1575:34: error: ‘pxa168_eth_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c:72:34: error: ‘dwmac_generic_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver is specific to ARCH_QCOM which depends on OF thus the driver is OF-only. Its of_device_id table is built unconditionally, thus of_match_ptr() for ID table does not make sense. Signed-off-by:
-
David S. Miller authored
Oleksij Rempel says: ==================== net: dsa: microchip: tc-ets support changes v3: - add tc_ets_supported to match supported devices - dynamically regenerated default TC to queue map. - add Acked-by to the first patch changes v2: - run egress limit configuration on all queue separately. Otherwise configuration may not apply correctly. ==================== Signed-off-by: -
Oleksij Rempel authored
Add ETS Qdisc support for KSZ9477 of switches. Current implementation is limited to strict priority mode. Tested on KSZ8563R with following configuration: tc qdisc replace dev lan2 root handle 1: ets strict 4 \ priomap 3 3 2 2 1 1 0 0 ip link add link lan2 name v1 type vlan id 1 \ egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 and patched iperf3 version: https://github.com/esnet/iperf/pull/1476 iperf3 -c 172.17.0.1 -b100M -l1472 -t100 -u -R --sock-prio 2 Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
-
Oleksij Rempel authored
Add ksz_setup_tc_mode() to make queue scheduling and shaping configuration more visible. Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== ipv6: optimize rt6_score_route() This patch series remove an expensive rwlock acquisition in rt6_check_neigh()/rt6_score_route(). First patch adds missing annotations, and second patch implements the optimization. ==================== Link: https://lore.kernel.org/r/20230313201732.887488-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
rt6_check_neigh() uses read_lock() to protect n->nud_state reading. This seems overkill and causes false sharing. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by:
-
Eric Dumazet authored
We have many lockless accesses to n->nud_state. Before adding another one in the following patch, add annotations to readers and writers. Signed-off-by:
-
Horatiu Vultur authored
As the function always returns 0 change the return type to be void instead of int. In this way also remove a wrong message in case of error which would never happen. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
-
- 14 Mar, 2023 2 commits
-
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230310144716.1544083-1-robh@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== i40e: support XDP multi-buffer Tirthendu Sarkar says: This patchset adds multi-buffer support for XDP. Tx side already has support for multi-buffer. This patchset focuses on Rx side. The last patch contains actual multi-buffer changes while the previous ones are preparatory patches. On receiving the first buffer of a packet, xdp_buff is built and its subsequent buffers are added to it as frags. While 'next_to_clean' keeps pointing to the first descriptor, the newly introduced 'next_to_process' keeps track of every descriptor for the packet. On receiving EOP buffer the XDP program is called and appropriate action is taken (building skb for XDP_PASS, reusing page for XDP_DROP, adjusting page offsets for XDP_{REDIRECT,TX}). The patchset also streamlines page offset adjustments for buffer reuse to make it easier to post process the rx_buffers after running XDP prog. With this patchset there does not seem to be any performance degradation for XDP_PASS and some improvement (~1% for XDP_TX, ~5% for XDP_DROP) when measured using xdp_rxq_info program from samples/bpf/ for 64B packets. v1: https://lore.kernel.org/netdev/20230306210822.3381942-1-anthony.l.nguyen@intel.com/ * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: add support for XDP multi-buffer Rx i40e: add xdp_buff to i40e_ring struct i40e: introduce next_to_process to i40e_ring i40e: use frame_sz instead of recalculating truesize for building skb i40e: Change size to truesize when using i40e_rx_buffer_flip() i40e: add pre-xdp page_count in rx_buffer i40e: change Rx buffer size for legacy-rx to support XDP multi-buffer i40e: consolidate maximum frame size calculation for vsi ==================== Link: https://lore.kernel.org/r/20230309212819.1198218-1-anthony.l.nguyen@intel.comSigned-off-by:
-
- 13 Mar, 2023 3 commits
-
-
Pedro Tammela authored
Add tests that check if filters can bind actions, that is create an action independently and then bind to a filter. tdc-tests under category 'infra': 1..18 ok 1 abdc - Reference pedit action object in filter ok 2 7a70 - Reference mpls action object in filter ok 3 d241 - Reference bpf action object in filter ok 4 383a - Reference connmark action object in filter ok 5 c619 - Reference csum action object in filter ok 6 a93d - Reference ct action object in filter ok 7 8bb5 - Reference ctinfo action object in filter ok 8 2241 - Reference gact action object in filter ok 9 35e9 - Reference gate action object in filter ok 10 b22e - Reference ife action object in filter ok 11 ef74 - Reference mirred action object in filter ok 12 2c81 - Reference nat action object in filter ok 13 ac9d - Reference police action object in filter ok 14 68be - Reference sample action object in filter ok 15 cf01 - Reference skbedit action object in filter ok 16 c109 - Reference skbmod action object in filter ok 17 4abc - Reference tunnel_key action object in filter ok 18 dadd - Reference vlan action object in filter Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230309175554.304824-1-pctammela@mojatatu.comSigned-off-by:
-
Maxim Korotkov authored
The value of an arithmetic expression is subject of possible overflow due to a failure to cast operands to a larger data type before performing arithmetic. Used macro for multiplication instead operator for avoiding overflow. Found by Security Code and Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230309174347.3515-1-korotkov.maxim.s@gmail.comSigned-off-by:
-
Jiri Pirko authored
Virtio spec introduced a feature VIRTIO_NET_F_GUEST_HDRLEN which when set implicates that device benefits from knowing the exact size of the header. For compatibility, to signal to the device that the header is reliable driver also needs to set this feature. Without this feature set by driver, device has to figure out the header size itself. Quoting the original virtio spec: "hdr_len is a hint to the device as to how much of the header needs to be kept to copy into each packet" "a hint" might not be clear for the reader what does it mean, if it is "maybe like that" of "exactly like that". This feature just makes it crystal clear and let the device count on the hdr_len being filled up by the exact length of header. Also note the spec already has following note about hdr_len: "Due to various bugs in implementations, this field is not useful as a guarantee of the transport header size." Without this feature the device needs to parse the header in core data path handling. Accurate information helps the device to eliminate such header parsing and directly use the hardware accelerators for GSO operation. virtio_net_hdr_from_skb() fills up hdr_len to skb_headlen(skb). The driver already complies to fill the correct value. Introduce the feature and advertise it. Note that virtio spec also includes following note for device implementation: "Caution should be taken by the implementation so as to prevent a malicious driver from attacking the device by setting an incorrect hdr_len." There is a plan to support this feature in our emulated device. A device of SolidRun offers this feature bit. They claim this feature will save the device a few cycles for every GSO packet. Link: https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-230006x3Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230309094559.917857-1-jiri@resnulli.usSigned-off-by:
-
