Reset controller updates for v5.16

Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.

* tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux:
  reset: mchp: sparx5: Extend support for lan966x
  dt-bindings: reset: Add lan966x support
  reset: uniphier: Add NX1 reset support
  dt-bindings: reset: uniphier: Add NX1 reset control binding
  reset: uniphier: Add audio system and video input reset control for PXs3
  reset: Allow building Broadcom STB RESCAL as module

Link: https://lore.kernel.org/r/96e686f78f0e42bad666df5ec0cbcb2dcdc270a3.camel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'optee-ffa-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers

Add FF-A support in OP-TEE driver

Adds supports for the OP-TEE driver to communicate with secure world
using FF-A [1] as transport.

[1] https://developer.arm.com/documentation/den0077/latest

* tag 'optee-ffa-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
  optee: add FF-A support
  optee: isolate smc abi
  optee: refactor driver with internal callbacks
  optee: simplify optee_release()
  tee: add sec_world_id to struct tee_shm
  tee: optee: Fix missing devices unregister during optee_remove
  tee/optee/shm_pool: fix application of sizeof to pointer

Link: https://lore.kernel.org/r/20211018121324.GA2943530@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Converted in-place without moving file to drivers/clk.

tested on ts7250 (EP9302).

Only setting rate and change parent tested for, as they
are missing on ts7250:
- video
- I2S
- ADC/KEYPAD
- PWM

Only video and I2S clock are interesting, as they are
GATE + double DIV + MUX, all other are pretty much
common but require ep93xx_syscon_swlocked_write to set
registers.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20211018103105.146380-3-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:

WARNING: CPU: 0 PID: 97 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared mclk
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_i2s_hw_params
snd_soc_dai_hw_params
soc_pcm_hw_params
snd_pcm_hw_params
snd_pcm_ioctl
...
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211018103105.146380-2-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers

Some new drivers changes for the Allwinner SoCs, converting to a helper
and improving logging.

* tag 'sunxi-drivers-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  bus: sun50i-de2: Adjust printing error message
  soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()

Link: https://lore.kernel.org/r/ad0aa469-9e1b-4bb6-a116-92648ed774fa.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.16:

- Select REGMAP_MMIO for i.MX GPCv2 driver to avoid build issue.
- A couple of i.MX GPCv2 driver changes from Marek Vasut to turn
  domain->pgc into bitfield for i.MX8MM GPU domain support.
- A series from Lucas Stach adding support of i.MX8MM nested power
  domains like VPUMIX and DISPMIX which contains the ADB and BLK_CTRL.
- An off-by-one fix on Lucas' i.MX8M blk-ctrl driver code.

* tag 'imx-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: imx8m-blk-ctrl: off by one in imx8m_blk_ctrl_xlate()
  soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl
  soc: imx: add i.MX8M blk-ctrl driver
  soc: imx: gpcv2: support system suspend/resume
  soc: imx: gpcv2: keep i.MX8M* bus clocks enabled
  soc: imx: gpcv2: add domain option to keep domain clocks enabled
  soc: imx: gpcv2: add lockdep annotation
  Revert "soc: imx: gpcv2: move reset assert after requesting domain power up"
  soc: imx: gpcv2: allow to disable individual power domains
  imx: soc: Select REGMAP_MMIO
  soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain
  soc: imx: gpcv2: Turn domain->pgc into bitfield

Link: https://lore.kernel.org/r/20211016140138.1603-2-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This patch extends sparx5 driver to support also the lan966x. The
process to reset the switch is the same only it has different offsets.
Therefore make the driver more generic and add support for lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211018091522.1113510-3-horatiu.vultur@microchip.comSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

This patch extends the existing file microchip,rst.yaml to support
also the lan966x. For this is added only a new compatible string.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211018091522.1113510-2-horatiu.vultur@microchip.comSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Adds support for using FF-A [1] as transport to the OP-TEE driver.

Introduces struct optee_msg_param_fmem which carries all information
needed when OP-TEE is calling FFA_MEM_RETRIEVE_REQ to get the shared
memory reference mapped by the hypervisor in S-EL2. Register usage is
also updated to include the information needed.

The FF-A part of this driver is enabled if CONFIG_ARM_FFA_TRANSPORT is
enabled.

[1] https://developer.arm.com/documentation/den0077/latestAcked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Isolate the ABI based on raw SMCs. Code specific to the raw SMC ABI is
moved into smc_abi.c. This makes room for other ABIs with a clear
separation.

The driver changes to use module_init()/module_exit() instead of
module_platform_driver(). The platform_driver_register() and
platform_driver_unregister() functions called directly to keep the same
behavior. This is needed because module_platform_driver() is based on
module_driver() which can only be used once in a module.

A function optee_rpc_cmd() is factored out from the function
handle_rpc_func_cmd() to handle the ABI independent part of RPC
processing.

This patch is not supposed to change the driver behavior, it's only a
matter of reorganizing the code.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

The OP-TEE driver is refactored with three internal callbacks replacing
direct calls to optee_from_msg_param(), optee_to_msg_param() and
optee_do_call_with_arg().

These functions a central to communicating with OP-TEE in secure world
by using the SMC Calling Convention directly.

This refactoring makes room for using other primitives to communicate
with OP-TEE in secure world while being able to reuse as much as
possible from the present driver.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Simplifies optee_release() with a new helper function,
optee_close_session_helper() which has been factored out from
optee_close_session().

A separate optee_release_supp() is added for the supplicant device.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Adds sec_world_id to struct tee_shm which describes a shared memory
object. sec_world_id can be used by a driver to store an id assigned by
secure world.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

The > comparison should be >= to prevent reading one element beyond the
end of the array.  The onecell_data->domains[] array is allocated in
imx8m_blk_ctrl_probe() and it has "onecell_data->num_domains" elements.

Fixes: 5b340e7813d4 ("soc: imx: add i.MX8M blk-ctrl driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This pull request contains Broadcom ARM/ARM64 SoC drivers changes for
5.16, please pull the following:

- Cai updates the bcm-pmb and bcm63xx-power drivers to use the
  devm_platform_ioremap_resource() helper

- Florian updates the Bus Interface Unit code to tune the 72116 and
  72113 chips according to their existing counterparts. The GISB driver is
  updated to be built as a non-removable module

* tag 'arm-soc/for-5.16/drivers' of https://github.com/Broadcom/stblinux:
  bus: brcmstb_gisb: Allow building as module
  soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72116
  soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72113
  soc: bcm63xx-power: Make use of the helper function devm_platform_ioremap_resource()
  soc: bcm: bcm-pmb: Make use of the helper function devm_platform_ioremap_resource()

Link: https://lore.kernel.org/r/20211013174016.831348-3-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.16

This drops the use of power-domains for exposing the load_state from the
QMP driver to clients, to avoid issues related to system suspend.

SMP2P becomes wakeup capable, to allow dying remoteprocs to wake up
Linux from suspend to perform recovery.

It adds RPM power-domain support for SM6350 and MSM8953 and base RPM
support for MSM8953 and QCM2290.

It adds support for MSM8996, SDM630 and SDM660 in the SPM driver, which
will enable the introduction of proper voltage scaling of the CPU
subsystem.

Support for releasing secondary CPUs on MSM8226 is introduced.

The Asynchronous Packet Router (APR) driver is extended to support the
new Generic Packet Router (GPR) variant, which is used to communicate
with the firmware in the new AudioReach audio driver.

Lastly it transitions a number of drivers to safer string functions, as
well as switching things to use devm_platform_ioremap_resource().

* tag 'qcom-drivers-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
  soc: qcom: apr: Add GPR support
  soc: dt-bindings: qcom: add gpr bindings
  soc: qcom: apr: make code more reuseable
  soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property
  soc: dt-bindings: qcom: apr: convert to yaml
  dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
  dt-bindings: msm/dp: Remove aoss-qmp header
  soc: qcom: aoss: Drop power domain support
  dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  soc: qcom: smp2p: Add wakeup capability to SMP2P IRQ
  dt-bindings: power: rpmpd: Add SM6350 to rpmpd binding
  dt-bindings: soc: qcom: aoss: Add SM6350 compatible
  soc: qcom: llcc: Disable MMUHWT retention
  soc: qcom: smd-rpm: Add QCM2290 compatible
  dt-bindings: soc: qcom: smd-rpm: Add QCM2290 compatible
  firmware: qcom_scm: Add compatible for MSM8953 SoC
  dt-bindings: firmware: qcom-scm: Document msm8953 bindings
  soc: qcom: pdr: Prefer strscpy over strcpy
  soc: qcom: rpmh-rsc: Make use of the helper function devm_platform_ioremap_resource_byname()
  soc: qcom: gsbi: Make use of the helper function devm_platform_ioremap_resource()
  ...

Link: https://lore.kernel.org/r/20211012173442.1017010-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

SRAM driver often returns -EPROBE_DEFER and thus this bus driver often
prints error message, even if it probes successfully later. This is
confusing for users and they often think that something is wrong.

Use dev_err_probe() helper for printing error message. It handles
-EPROBE_DEFER automatically.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211010071812.145178-1-jernej.skrabec@gmail.com

When OP-TEE driver is built as a module, OP-TEE client devices
registered on TEE bus during probe should be unregistered during
optee_remove. So implement optee_unregister_devices() accordingly.

Fixes: c3fa24af ("tee: optee: add TEE bus device enumeration support")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Merge tag 'omap-for-v5.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers

Driver changes for ti-sysc for v5.16

Changes for ti-sysc driver for improved system suspend and resume
support as some drivers need to be reinitialized on resume. Also
a non-urgent resume warning fix, and dropping of legacy flags for
gpio and sham:

- Fix timekeeping suspended warning on resume. Probably no need to merge
  this into fixes as it's gone unnoticed for a while.

- Check for context loss for reinit of a module

- Add add quirk handling to reinit on context loss, and also fix a
  build warning it caused

- Add quirk handling to reset on reinit

- Use context loss quirk for gpmc and otg

- Handle otg force-idle quirk even if no driver is loaded

- Drop legacy flags for gpio and sham

* tag 'omap-for-v5.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Fix variable set but not used warning for reinit_modules
  bus: ti-sysc: Drop legacy quirk flag for sham
  bus: ti-sysc: Drop legacy quirk flag for gpio
  bus: ti-sysc: Handle otg force idle quirk
  bus: ti-sysc: Use context lost quirk for otg
  bus: ti-sysc: Use context lost quirks for gpmc
  bus: ti-sysc: Add quirk handling for reset on re-init
  bus: ti-sysc: Add quirk handling for reinit on context lost
  bus: ti-sysc: Check for lost context in sysc_reinit_module()
  bus: ti-sysc: Fix timekeeping_suspended warning on resume

Link: https://lore.kernel.org/r/pull-1633950030-501948@atomide.com-2Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.15-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers

- mt8192: add mutex support
- mmsys:
  add more components
  add routing table for mt8192
  add reset controller support

* tag 'v5.15-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  drm/mediatek: mtk_dsi: Reset the dsi0 hardware
  soc: mediatek: mmsys: Add reset controller support
  soc: mediatek: add mtk mutex support for MT8192
  soc: mediatek: mmsys: Add mt8192 mmsys routing table
  soc: mediatek: mmsys: add comp OVL_2L2/POSTMASK/RDMA4

Link: https://lore.kernel.org/r/b1d364d0-f2ae-488b-b3f7-c694049c20d3@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.16

1. Renesas RPC: fix unaligned bus access and QSPI data transfers in
   manual modes.
2. Renesas RPC: select RESET_CONTROLLER as it is necessary for
   operation.
3. FSL IFC: fix error paths.
4. Broadcom: allow building as module.

* tag 'memory-controller-drv-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
  memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLER
  memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as module
  memory: samsung: describe drivers in KConfig
  memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlash
  memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode
  dt-bindings: rpc: renesas-rpc-if: Add support for the R8A779A0 RPC-IF

Link: https://lore.kernel.org/r/20211010175836.13302-1-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.14 - Mediatek

Add MT8195 support to the Mediatek SMI memory controller driver.  This
brings also several cleanups and minor enhancements before adding actual
new device support.

* tag 'memory-controller-drv-mtk-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  MAINTAINERS: Add entry for MediaTek SMI
  memory: mtk-smi: mt8195: Add initial setting for smi-larb
  memory: mtk-smi: mt8195: Add initial setting for smi-common
  memory: mtk-smi: mt8195: Add smi support
  memory: mtk-smi: Use devm_platform_ioremap_resource
  memory: mtk-smi: Add clocks for smi-sub-common
  memory: mtk-smi: Add device link for smi-sub-common
  memory: mtk-smi: Add error handle for smi_probe
  memory: mtk-smi: Adjust some code position
  memory: mtk-smi: Rename smi_gen to smi_type
  memory: mtk-smi: Use clk_bulk clock ops
  dt-bindings: memory: mediatek: Add mt8195 smi sub common
  dt-bindings: memory: mediatek: Add mt8195 smi binding

Link: https://lore.kernel.org/r/20211010175836.13302-2-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'memory-controller-drv-tegra-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.16 - Tegra SoC

1. Several minor improvements.
2. Handle errors in BPMP response of Tegra186 EMC.

* tag 'memory-controller-drv-tegra-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: tegra210-emc: replace DEFINE_SIMPLE_ATTRIBUTE with
  memory: tegra186-emc: Fix error return code in tegra186_emc_probe()
  memory: tegra: Make use of the helper function devm_add_action_or_reset()
  memory: tegra186-emc: Handle errors in BPMP response
  memory: tegra: Remove interconnect state syncing hack
  memory: tegra210-emc: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  memory: tegra30-emc: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  memory: tegra: make the array list static const, makes object smaller

Link: https://lore.kernel.org/r/20211010175836.13302-3-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.16-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

cpuidle: tegra: Changes for v5.16-rc1

This pulls in the for-5.16/clk and for-5.16/soc branches and uses the
stubs added in them to enable compile testing of the cpuidle driver.
While at it, this also fixes a potential driver probe order race
condition between the PMC and the cpuidle driver.

* tag 'tegra-for-5.16-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  cpuidle: tegra: Check whether PMC is ready
  cpuidle: tegra: Enable compile testing
  clk: tegra: Add stubs needed for compile testing

Link: https://lore.kernel.org/r/20211008201132.1678814-5-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

soc/tegra: Changes for v5.16-rc1

This set consists of stub additions to enable compile testing for more
drivers, exposes the PMC's USB regmap on all SoC generations, removes a
state synchronization workaround that is no longer needed and adds an
error reporting driver that can help troubleshoot crashes.

To top it all off, an error handling path in the powergating code is
fixed and the devm_platform_ioremap_resource() function is used to
remove some boilerplate code.

* tag 'tegra-for-5.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Use devm_platform_ioremap_resource()
  soc/tegra: Add Tegra186 ARI driver
  soc/tegra: Fix an error handling path in tegra_powergate_power_up()
  soc/tegra: pmc: Expose USB regmap to all SoCs
  soc/tegra: pmc: Disable PMC state syncing
  soc/tegra: pm: Make stubs usable for compile testing
  soc/tegra: irq: Add stubs needed for compile testing
  soc/tegra: fuse: Add stubs needed for compile testing

Link: https://lore.kernel.org/r/20211008201132.1678814-4-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.16-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

firmware: tegra: Changes for v5.16-rc1

This contains a fix for a stack usage problem that was causing build
failures on 32-bit ARM and a minor janitorial cleanup.

* tag 'tegra-for-5.16-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: bpmp: Use devm_platform_ioremap_resource()
  firmware: tegra: Reduce stack usage

Link: https://lore.kernel.org/r/20211008201132.1678814-3-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-drivers-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/drivers

Amlogic Drivers updates for v5.16:

Minor cleanups, and the addition of the S905Y2 SoC ID

* tag 'amlogic-drivers-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  soc: amlogic: meson-clk-measure: Make use of the helper function devm_platform_ioremap_resource()
  soc: amlogic: canvas: Make use of the helper function devm_platform_ioremap_resource()
  soc: amlogic: meson-gx-socinfo: Add S905Y2 ID for Radxa Zero

Link: https://lore.kernel.org/r/f8e020d3-29f7-0745-3864-01975edd20f7@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add a driver to hook into panic notifiers and print machine check
status for debugging. Status information is retrieved via SMC. This
is supported by upstream ARM Trusted Firmware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Reset dsi0 HW to default when power on. This prevents to have different
settingis between the bootloader and the kernel.

As not all Mediatek boards have the reset consumer configured in their
board description, also is not needed on all of them, the reset is optional,
so the change is compatible with all boards.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20210930103105.v4.7.Idbb4727ddf00ba2fe796b630906baff10d994d89@changeidSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Among other features the mmsys driver should implement a reset
controller to be able to reset different bits from their space.

Cc: Jitao Shi <jitao.shi@mediatek.com>
Suggested-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210930103105.v4.6.I15e2419141a69b2e5c7e700c34d92a69df47e04d@changeidSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add mtk mutex support for MT8192 SoC.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20210930155222.5861-5-yongqiang.niu@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Building the bpmp-debugfs driver for Arm results in a warning for stack usage:

drivers/firmware/tegra/bpmp-debugfs.c:321:16: error: stack frame size of 1224 bytes in function 'bpmp_debug_store' [-Werror,-Wframe-larger-than=]
static ssize_t bpmp_debug_store(struct file *file, const char __user *buf,

It should be possible to rearrange the code to not require two separate
buffers for the file name, but the easiest workaround is to use dynamic
allocation.

Fixes: 5e37b9c1 ("firmware: tegra: Add support for in-band debug")
Link: https://lore.kernel.org/all/20201204193714.3134651-1-arnd@kernel.org/Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[treding@nvidia.com: consistently return NULL on failure]
Signed-off-by: Thierry Reding <treding@nvidia.com>

The error handling code of fsl_ifc_ctrl_probe is problematic. When
fsl_ifc_ctrl_init fails or request_irq of fsl_ifc_ctrl_dev->irq fails,
it forgets to free the irq and nand_irq. Meanwhile, if request_irq of
fsl_ifc_ctrl_dev->nand_irq fails, it will still free nand_irq even if
the request_irq is not successful.

Fix this by refactoring the error handling code.

Fixes: d2ae2e20 ("driver/memory:Move Freescale IFC driver to a common driver")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210925151434.8170-1-mudongliangabcd@gmail.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

fix debugfs_simple_attr.cocci warning:
drivers/memory/tegra/tegra210-emc-core.c:1665:0-23: WARNING:tegra210_emc_debug_min_rate_fops
should be defined with DEFINE_DEBUGFS_ATTRIBUTE

Commit 6fc5f1ad ("memory: tegra210-emc: replace
DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE") fixed the same
warning, but didn't fix all matches in this file at once.
Signed-off-by: Kai Song <songkai01@inspur.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211005043514.9650-1-songkai01@inspur.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

The Renesas RPC-IF driver calls devm_reset_control_get_exclusive(),
which returns -ENOTSUPP if CONFIG_RESET_CONTROLLER is not enabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/e443aa66d146da5646b7ebece8876545b8621063.1633447756.git.geert+renesas@glider.beSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

Return the error code when command fails.

Fixes: 13324edb ("memory: tegra186-emc: Handle errors in BPMP response")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20210928021545.3774677-1-yangyingliang@huawei.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

If an error occurs after a successful tegra_powergate_enable_clocks()
call, it must be undone by a tegra_powergate_disable_clocks() call, as
already done in the below and above error handling paths of this function.

Update the 'goto' to branch at the correct place of the error handling
path.

Fixes: a3804512 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>