Sudarsana Reddy Kalluru says:

====================
qed* Fix series.

The patch series addresses couple of issues in the recent commits.
Patch (1) populates the actual dump-size of config attribute instead of
providing a fixed size value.
Patch(2) updates frame format of flash config buffer as required by
management FW (MFW).

Please consider applying it to net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

MFW associates the entity id to a config attribute instead of assigning
one entity id for all the config attributes.
This patch incorporates driver changes to link entity id to a config id
attribute.

Fixes: 0dabbe1b ("qed: Add driver API for flashing the config attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver currently returns max-buf-size as size of the config attribute.
This patch incorporates changes to read this value from MFW (if available)
and provide it to the user. Also did a trivial clean up in this path.

Fixes: d44a3ced ("qede: Add support for reading the config id attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
devlink: add unknown 'fw_load_policy' value

Dirk says:

Recently we added an unknown value for the 'reset_dev_on_drv_probe' devlink
parameter. Extend the 'fw_load_policy' parameter in the same way.

The only driver that uses this right now is the nfp driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If the 'app_fw_from_flash' HWinfo key is invalid, set the
'fw_load_policy' devlink parameter value to unknown.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the 'reset_dev_on_drv_probe' devlink parameter, it is useful
to have an unknown value which can be used by drivers to report that the
hardware value isn't recognized or is otherwise invalid instead of
failing the operation.

This is especially useful for u8/enum parameters.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2019-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
We have a number of changes, but things are settling down:
 * a fix in the new 6 GHz channel support
 * a fix for recent minstrel (rate control) updates
   for an infinite loop
 * handle interface type changes better wrt. management frame
   registrations (for management frames sent to userspace)
 * add in-BSS RX time to survey information
 * handle HW rfkill properly if !CONFIG_RFKILL
 * send deauth on IBSS station expiry, to avoid state mismatches
 * handle deferred crypto tailroom updates in mac80211 better
   when device restart happens
 * fix a spectre-v1 - really a continuation of a previous patch
 * advertise NL80211_CMD_UPDATE_FT_IES as supported if so
 * add some missing parsing in VHT extended NSS support
 * support HE in mac80211_hwsim
 * let mac80211 drivers determine the max MTU themselves
along with the usual cleanups etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently frame registrations are not purged, even when changing the
interface type.  This can lead to potentially weird situations where
frames possibly not allowed on a given interface type remain registered
due to the type switching happening after registration.

The kernel currently relies on userspace apps to actually purge the
registrations themselves, this is not something that the kernel should
rely on.

Add a call to cfg80211_mlme_purge_registrations() to forcefully remove
any registrations left over prior to switching the iftype.

Cc: stable@vger.kernel.org
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Saeed Mahameed says:

====================
mlx5-updates-2019-09-10

Misc build warnings cleanup for mlx5:

1) Reduce stack usage in FW trace
2) Fix addr's type in mlx5dr_icm_dm
3) Fix rt's type in dr_action_create_reformat_action
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Improvements for -next

Misc patches for -next. It includes:
 - Two fixes for features in -next only
 - New features support for GMAC cores (which includes GMAC4 and GMAC5)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the ARP Offload feature in GMAC4 and GMAC5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support for TX VLAN Offload using descriptors based features
available in GMAC4/5.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the support for Source Address Insertion and Replacement in GMAC4
and GMAC5 cores. Two methods are supported: Descriptor based and
register based.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'value' was being or'ed with a value from another register. This is a
typo and could cause new written value to be wrong. Fix it.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds the support for VLAN HASH Filtering in GMAC4/5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When RX Coalesce settings are set to all zero (which is a valid setting)
we will currently get a divide-by-zero error. Fix it.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
net: hns3: add a feature & bugfixes & cleanups

This patch-set includes a VF feature, bugfixes and cleanups for the HNS3
ethernet controller driver.

[patch 01/07] adds ethtool_ops.set_channels support for HNS3 VF driver

[patch 02/07] adds a recovery for setting channel fail.

[patch 03/07] fixes an error related to shaper parameter algorithm.

[patch 04/07] fixes an error related to ksetting.

[patch 05/07] adds cleanups for some log pinting.

[patch 06/07] adds a NULL pointer check before function calling.

[patch 07/07] adds some debugging information for reset issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds more information for reset DFX. Also, adds some
cleanups to reset info, move reset_fail_cnt into struct
hclge_rst_stats, and modifies some print formats.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch checks ops->set_default_reset_request whether is NULL
before using it in function hns3_slot_reset.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pfc_en and pfc_map need to be displayed in hexadecimal notation,
printing dma address should use %pad, and the end of printed string
needs to be add "\n".

This patch modifies them.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For hardware doesn't support use specified speed and duplex
to negotiate, it's unnecessary to check and modify the port
speed and duplex for fibre port when autoneg is on.

Fixes: 22f48e24 ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when hns3 driver configures the tm shaper to limit
bandwidth below 20Mbit using the parameters calculated by
hclge_shaper_para_calc(), the actual bandwidth limited by tm
hardware module is not accurate enough, for example, 1.28 Mbit
when the user is configuring 1 Mbit.

This patch adjusts the ir_calc to be closer to ir, and
always calculate the ir_b parameter when user is configuring
a small bandwidth. Also, removes an unnecessary parenthesis
when calculating denominator.

Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After setting new channel num, it needs free old ring memory and
allocate new ring memory. If there is no enough memory and allocate
new ring memory fail, the ring may initialize fail. To make sure
the network interface can work normally, driver should revert the
channel to the old configuration.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds ethtool_ops.set_channels support for HNS3 VF driver,
and updates related TQP information and RSS information, to support
modification of VF TQP number, and uses current rss_size instead of
max_rss_size to initialize RSS.

Also, fixes a format error in hclgevf_get_rss().
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. hwsim can be used to assist initial development of these
features without having access to HW.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Link: https://lore.kernel.org/r/20190813063657.7544-1-sven@narfation.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

commit 1222a160 ("nl80211: Fix possible Spectre-v1 for CQM
RSSI thresholds") was incomplete and requires one more fix to
prevent accessing to rssi_thresholds[n] because user can control
rssi_thresholds[i] values to make i reach to n. For example,
rssi_thresholds = {-400, -300, -200, -100} when last is -34.

Cc: stable@vger.kernel.org
Fixes: 1222a160 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://lore.kernel.org/r/20190908005653.17433-1-masashi.honma@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Make it possibly for drivers to adjust the default max_mtu
by storing it in the hardware struct and using that value
for all interfaces.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1567738137-31748-1-git-send-email-wgong@codeaurora.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

With the help of boolinit.cocci, we use !nl80211_reg_change_event_fill
instead of (nl80211_reg_change_event_fill == false). Meanwhile, Clean
up the code.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Link: https://lore.kernel.org/r/1567657537-65472-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When we expire an inactive station, try to send it a deauth. This
helps if it's actually still around, and just has issues with
beacon distribution (or we do), and it will not also remove us.
Then, if we have shared state, this may not be reset properly,
causing problems; for example, we saw a case where aggregation
sessions weren't removed properly (due to the TX start being
offloaded to firmware and it relying on deauth for stop), causing
a lot of traffic to get lost due to the SN reset after remove/add
of the peer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-9-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

We already assume that key is not NULL and dereference it in a few
other places before we check whether it is NULL, so the check is
unnecessary.  Remove it.

Fixes: 96fc6efb ("mac80211: IEEE 802.11 Extended Key ID support")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-8-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In case we got a fw restart while roaming from encrypted AP to
non-encrypted one, we might end up with hitting a warning on the pending
counter crypto_tx_tailroom_pending_dec having a non-zero value.

The following comment taken from net/mac80211/key.c explains the rational
for the delayed tailroom needed:

	/*
	* The reason for the delayed tailroom needed decrementing is to
	* make roaming faster: during roaming, all keys are first deleted
	* and then new keys are installed. The first new key causes the
	* crypto_tx_tailroom_needed_cnt to go from 0 to 1, which invokes
	* the cost of synchronize_net() (which can be slow). Avoid this
	* by deferring the crypto_tx_tailroom_needed_cnt decrementing on
	* key removal for a while, so if we roam the value is larger than
	* zero and no 0->1 transition happens.
	*
	* The cost is that if the AP switching was from an AP with keys
	* to one without, we still allocate tailroom while it would no
	* longer be needed. However, in the typical (fast) roaming case
	* within an ESS this usually won't happen.
	*/

The next flow lead to the warning eventually reported as a bug:
1. Disconnect from encrypted AP
2. Set crypto_tx_tailroom_pending_dec = 1 for the key
3. Schedule work
4. Reconnect to non-encrypted AP
5. Add a new key, setting the tailroom counter = 1
6. Got FW restart while pending counter is set ---> hit the warning

While on it, the ieee80211_reset_crypto_tx_tailroom() func was merged into
its single caller ieee80211_reenable_keys (previously called
ieee80211_enable_keys). Also, we reset the crypto_tx_tailroom_pending_dec
and remove the counters warning as we just reset both.
Signed-off-by: Lior Cohen <lior2.cohen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-7-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When we reach this point, the key cannot be NULL. Remove the condition
that suggests otherwise.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-6-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

"HE/HT/VHT" is a bit confusing since really the order of
development (and possible support) is different - change
this to "HT/VHT/HE".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-4-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When the RFKILL subsystem isn't available, then rfkill_blocked()
always returns false. In the case of hardware rfkill this will
be wrong though, as if the hardware reported being killed then
it cannot operate any longer.

Since we only ever call the rfkill_sync work in this case, just
rename it to rfkill_block and always pass "true" for the blocked
parameter, rather than passing rfkill_blocked().

We rely on the underlying driver to still reject any new attempt
to bring up the device by itself.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-2-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

This fixes was missed in parsing the vht capabilities max bw
support.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Fixes: e80d6425 ("mac80211: copy VHT EXT NSS BW Support/Capable data to station")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830114057.22197-1-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The boundary value used for the 6G band was incorrect as it would
result in invalid 6G channel number for certain frequencies.
Reported-by: Amar Singhal <asinghal@codeaurora.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://lore.kernel.org/r/1567510772-24263-1-git-send-email-arend.vanspriel@broadcom.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Mark mlx5_tracer_print_trace as noinline as the function only uses 512
bytes on the stack to avoid the following build warning:

drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c:660:13: error: stack frame size of 1032 bytes in function 'mlx5_fw_tracer_handle_traces' [-Werror,-Wframe-larger-than=]

Fixes: 70dd6fdb ("net/mlx5: FW tracer, parse traces and kernel tracing support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

clang errors when CONFIG_PHYS_ADDR_T_64BIT is not set:

drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c:121:8:
error: incompatible pointer types passing 'u64 *' (aka 'unsigned long
long *') to parameter of type 'phys_addr_t *' (aka 'unsigned int *')
[-Werror,-Wincompatible-pointer-types]
                                   &icm_mr->dm.addr, &icm_mr->dm.obj_id);
                                   ^~~~~~~~~~~~~~~~
include/linux/mlx5/driver.h:1092:39: note: passing argument to parameter
'addr' here
                         u64 length, u16 uid, phys_addr_t *addr, u32 *obj_id);
                                                           ^
1 error generated.

Use phys_addr_t for addr's type in mlx5dr_icm_dm, which won't change
anything with 64-bit builds because phys_addr_t is u64 when
CONFIG_PHYS_ADDR_T_64BIT is set, which is always when CONFIG_64BIT is
set.

Fixes: 29cf8feb ("net/mlx5: DR, ICM pool memory allocator")
Link: https://github.com/ClangBuiltLinux/linux/issues/653Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

clang warns:

drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1080:9:
warning: implicit conversion from enumeration type 'enum
mlx5_reformat_ctx_type' to different enumeration type 'enum
mlx5dr_action_type' [-Wenum-conversion]
                        rt = MLX5_REFORMAT_TYPE_L2_TO_L2_TUNNEL;
                           ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1082:9:
warning: implicit conversion from enumeration type 'enum
mlx5_reformat_ctx_type' to different enumeration type 'enum
mlx5dr_action_type' [-Wenum-conversion]
                        rt = MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL;
                           ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1084:51:
warning: implicit conversion from enumeration type 'enum
mlx5dr_action_type' to different enumeration type 'enum
mlx5_reformat_ctx_type' [-Wenum-conversion]
                ret = mlx5dr_cmd_create_reformat_ctx(dmn->mdev, rt, data_sz, data,
                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~            ^~
3 warnings generated.

Use the right type for rt, which is mlx5_reformat_ctx_type so there are
no warnings about mismatched types.

Fixes: 9db810ed ("net/mlx5: DR, Expose steering action functionality")
Link: https://github.com/ClangBuiltLinux/linux/issues/652Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Austin Kim <austindh.kim@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Simon Horman says:

====================
nfp: implement firmware loading policy

Dirk says:

This series adds configuration capabilities to the firmware loading policy of
the NFP driver.

NFP firmware loading is controlled via three HWinfo keys which can be set per
device: 'abi_drv_reset', 'abi_drv_load_ifc' and 'app_fw_from_flash'.
Refer to patch #11 for more detail on how these control the firmware loading.

In order to configure the full extend of FW loading policy, a new devlink
parameter has been introduced, 'reset_dev_on_drv_probe', which controls if the
driver should reset the device when it's probed. This, in conjunction with the
existing 'fw_load_policy' (extended to include a 'disk' option) provides the
means to tweak the NFP HWinfo keys as required by users.

Patches 1 and 2 adds the devlink modifications and patches 3 through 9 adds the
support into the NFP driver. Furthermore, the last 2 patches are documentation
only.

v2:
  Renamed all 'reset_dev_on_drv_probe' defines the same as the devlink parameter
  name (Jiri)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>