- 25 May, 2021 3 commits
-
-
Yang Li authored
Fix function name in hns_ethtool.c kernel-doc comment to remove these warnings found by clang_w1. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting prototype for hns_nic_set_link_settings(). Prototype was for hns_nic_set_link_ksettings() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting prototype for get_ethtool_stats(). Prototype was for hns_get_ethtool_stats() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning: expecting prototype for get_strings(). Prototype was for hns_get_strings() instead. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Fixes: 'commit 262b38cd ("net: ethernet: hisilicon: hns: use phydev from struct net_device")' Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
proc_dointvec() cannot do min and max check for setting a value when extra1/extra2 is set, so change it to proc_dointvec_minmax() for sysctl encap_port. Fixes: e8a3001c ("sctp: add encap_port for netns sock asoc and transport") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to add the missing setting back for asoc encap_port. Fixes: 8dba2960 ("sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt") Signed-off-by:
-
- 24 May, 2021 19 commits
-
-
George McCollister authored
Also enable phy errata workaround on 9567 since has the same errata as the 9477 according to the manufacture's documentation. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Pavel Skripkin authored
Syzbot reported memory leak in smsc75xx_bind(). The problem was is non-freed memory in case of errors after memory allocation. backtrace: [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460 [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728 Fixes: d0cad871 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Cc: stable@kernel.vger.org Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
-
George McCollister authored
Commit 2e9f6093 ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") added the following which resulted in -EINVAL always being returned: if (skb->mac_len < sizeof(struct hsr_ethhdr)) return -EINVAL; mac_len was not being set correctly so this check completely broke HSR/PRP since it was always 14, not 20. Set mac_len correctly and modify the mac_len checks to test in the correct places since sometimes it is legitimately 14. Fixes: 2e9f6093 ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") Signed-off-by:
-
Saubhik Mukherjee authored
In cops_probe1(), there is a write to dev->base_addr after requesting an interrupt line and registering the interrupt handler cops_interrupt(). The handler might be called in parallel to handle an interrupt. cops_interrupt() tries to read dev->base_addr leading to a potential data race. So write to dev->base_addr before calling request_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Saubhik Mukherjee <saubhik.mukherjee@gmail.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for SJA1105 DSA driver This series contains some minor fixes in the sja1105 driver: - improved error handling in the probe path - rejecting an invalid phy-mode specified in the device tree - register access fix for SJA1105P/Q/R/S for the virtual links through the dynamic reconfiguration interface - handling 2 bridge VLANs where the second is supposed to overwrite the first - making sure that the lack of a pvid results in the actual dropping of untagged traffic ==================== Signed-off-by: -
Vladimir Oltean authored
When running this sequence of operations: ip link add br0 type bridge vlan_filtering 1 ip link set swp4 master br0 bridge vlan add dev swp4 vid 1 We observe the traffic sent on swp4 is still untagged, even though the bridge has overwritten the existing VLAN entry: port vlan ids swp4 1 PVID br0 1 PVID Egress Untagged This happens because we didn't consider that the 'bridge vlan add' command just overwrites VLANs like it's nothing. We treat the 'vid 1 pvid untagged' and the 'vid 1' as two separate VLANs, and the first still has precedence when calling sja1105_build_vlan_table. Obviously there is a disagreement regarding semantics, and we end up doing something unexpected from the PoV of the bridge. Let's actually consider an "existing VLAN" to be one which is on the same port, and has the same VLAN ID, as one we already have, and update it if it has different flags than we do. The first blamed commit is the one introducing the bug, the second one is the latest on top of which the bugfix still applies. Fixes: ec5ae610 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Fixes: 5899ee36 ("net: dsa: tag_8021q: add a context structure") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
One thing became visible when writing the blamed commit, and that was that STP and PTP frames injected by net/dsa/tag_sja1105.c using the deferred xmit mechanism are always classified to the pvid of the CPU port, regardless of whatever VLAN there might be in these packets. So a decision needed to be taken regarding the mechanism through which we should ensure that delivery of STP and PTP traffic is possible when we are in a VLAN awareness mode that involves tag_8021q. This is because tag_8021q is not concerned with managing the pvid of the CPU port, since as far as tag_8021q is concerned, no traffic should be sent as untagged from the CPU port. So we end up not actually having a pvid on the CPU port if we only listen to tag_8021q, and unless we do something about it. The decision taken at the time was to keep VLAN 1 in the list of priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures that STP and PTP frames can always be sent to the outside world. However there is a problem. If we do the following while we are in the best_effort_vlan_filtering=true mode: ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan del dev swp2 vid 1 Then untagged and pvid-tagged frames should be dropped. But we observe that they aren't, and this is because of the precaution we took that VID 1 is always installed on all ports. So clearly VLAN 1 is not good for this purpose. What about VLAN 0? Well, VLAN 0 is managed by the 8021q module, and that module wants to ensure that 802.1p tagged frames are always received by a port, and are always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our STP and PTP frames to be untagged if the stack sent them as untagged - we don't want the driver to just decide out of the blue that it adds VID 0 to some packets. So what to do? Well, there is one other VLAN that is reserved, and that is 4095: $ ip link add link swp2 name swp2.4095 type vlan id 4095 Error: 8021q: Invalid VLAN id. $ bridge vlan add dev swp2 vid 4095 Error: bridge: Vlan id is invalid. After we made this change, VLAN 1 is indeed forwarded and/or dropped according to the bridge VLAN table, there are no further alterations done by the sja1105 driver. Fixes: ec5ae610 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Signed-off-by:
-
Vladimir Oltean authored
The driver continues probing when a port is configured for an unsupported PHY interface type, instead it should stop. Fixes: 8aa9ebcc ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by:
-
Vladimir Oltean authored
If any of sja1105_static_config_load(), sja1105_clocking_setup() or sja1105_devlink_setup() fails, we can't just return in the middle of sja1105_setup() or memory will leak. Add a cleanup path. Fixes: 0a7bdbc2 ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c") Fixes: 8aa9ebcc ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by:
-
Vladimir Oltean authored
Unlike other drivers which pretty much end their .probe() execution with dsa_register_switch(), the sja1105 does some extra stuff. When that fails with -ENOMEM, the driver is quick to return that, forgetting to call dsa_unregister_switch(). Not critical, but a bug nonetheless. Fixes: 4d752508 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Fixes: a68578c2 ("net: dsa: Make deferred_xmit private to sja1105") Signed-off-by:
-
Vladimir Oltean authored
At the beginning of the sja1105_dynamic_config.c file there is a diagram of the dynamic config interface layout: packed_buf | V +-----------------------------------------+------------------+ | ENTRY BUFFER | COMMAND BUFFER | +-----------------------------------------+------------------+ <----------------------- packed_size ------------------------> So in order to pack/unpack the command bits into the buffer, sja1105_vl_lookup_cmd_packing must first advance the buffer pointer by the length of the entry. This is similar to what the other *cmd_packing functions do. This bug exists because the command packing function for P/Q/R/S was copied from the E/T generation, and on E/T, the command was actually embedded within the entry buffer itself. Fixes: 94f94d4a ("net: dsa: sja1105: add static tables for virtual links") Signed-off-by:
-
Johan Hovold authored
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the tiocmset and rfkill requests which erroneously used usb_rcvctrlpipe(). Fixes: 72dc1c09 ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Hayes Wang authored
Verify some fields of the USB descriptor to make sure the driver could be used by the device. Besides, remove the check of endpoint number in rtl8152_probe(). usb_find_common_endpoints() includes it. BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com Fixes: c2198943 ("r8152: search the configuration of vendor mode") Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Reviewed-by:
-
Taehee Yoo authored
If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called. When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset()) uses dsmark_qdisc_data->q pointer wihtout any null checking. So, panic would occur. Test commands: sysctl net.core.default_qdisc=dsmark -w ip link add dummy0 type dummy ip link add vw0 link dummy0 type virt_wifi ip link set vw0 up Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910 RIP: 0010:qdisc_reset+0x2b/0x680 Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54 55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02 00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000 RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018 RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553 R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940 R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0 FS: 00007f5042287680(0000) GS:ffff888119800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? rcu_read_lock_bh_held+0xa0/0xa0 dsmark_reset+0x3d/0xf0 [sch_dsmark] qdisc_reset+0xa9/0x680 qdisc_destroy+0x84/0x370 qdisc_create_dflt+0x1fe/0x380 attach_one_default_qdisc.constprop.41+0xa4/0x180 dev_activate+0x4d5/0x8c0 ? __dev_open+0x268/0x390 __dev_open+0x270/0x390 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Aditya Srivastava authored
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. The header for drivers/nfc/nfcmrvl follows this syntax, but the content inside does not comply with kernel-doc. This line was probably not meant for kernel-doc parsing, but is parsed due to the presence of kernel-doc like comment syntax(i.e, '/**'), which causes unexpected warnings from kernel-doc. For e.g., running scripts/kernel-doc -none on drivers/nfc/nfcmrvl/spi.c causes warning: warning: expecting prototype for Marvell NFC(). Prototype was for SPI_WAIT_HANDSHAKE() instead Provide a simple fix by replacing such occurrences with general comment format, i.e. '/*', to prevent kernel-doc from parsing it. Signed-off-by:
Aditya Srivastava <yashsri421@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
DENG Qingfang authored
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but was not reset when it is disabled, which may cause traffic leaks: ip link add br0 type bridge vlan_filtering 1 ip link add br1 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br1 ip link set br0 type bridge vlan_filtering 0 ip link set br1 type bridge vlan_filtering 0 # traffic in br0 and br1 will start leaking to each other As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the PCR_MATRIX write from mt7530_port_set_vlan_aware. Fixes: 83163f7d ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by:DENG Qingfang <dqfext@gmail.com> Reviewed-by:
-
David S. Miller authored
Davide Caratti says: ==================== two fixes for the fq_pie scheduler - patch 1/2 restores the possibility to use 65536 flows with fq_pie, preserving the fix for an endless loop in the control plane - patch 2/2 fixes an OOB access that can be observed in the traffic path of fq_pie scheduler, when the classification selects a flow beyond the allocated space. ==================== Signed-off-by: -
Davide Caratti authored
the following script: # tc qdisc add dev eth0 handle 0x1 root fq_pie flows 2 # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress matchall action skbedit priority 0x10002 # ping 192.0.2.2 -I eth0 -c2 -w1 -q produces the following splat: BUG: KASAN: slab-out-of-bounds in fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie] Read of size 4 at addr ffff888171306924 by task ping/942 CPU: 3 PID: 942 Comm: ping Not tainted 5.12.0+ #441 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie] __dev_queue_xmit+0x1034/0x2b10 ip_finish_output2+0xc62/0x2120 __ip_finish_output+0x553/0xea0 ip_output+0x1ca/0x4d0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1c4b/0x2d00 sock_sendmsg+0xdb/0x110 __sys_sendto+0x1d7/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fe69735c3eb Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89 RSP: 002b:00007fff06d7fb38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055e961413700 RCX: 00007fe69735c3eb RDX: 0000000000000040 RSI: 000055e961413700 RDI: 0000000000000003 RBP: 0000000000000040 R08: 000055e961410500 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff06d81260 R13: 00007fff06d7fb40 R14: 00007fff06d7fc30 R15: 000055e96140f0a0 Allocated by task 917: kasan_save_stack+0x19/0x40 __kasan_kmalloc+0x7f/0xa0 __kmalloc_node+0x139/0x280 fq_pie_init+0x555/0x8e8 [sch_fq_pie] qdisc_create+0x407/0x11b0 tc_modify_qdisc+0x3c2/0x17e0 rtnetlink_rcv_msg+0x346/0x8e0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888171306800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 36 bytes to the right of 256-byte region [ffff888171306800, ffff888171306900) The buggy address belongs to the page: page:00000000bcfb624e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x171306 head:00000000bcfb624e order:1 compound_mapcount:0 flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 dead000000000100 dead000000000122 ffff888100042b40 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc >ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a valid flow: it's an address beyond the allocated memory. Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") CC: stable@vger.kernel.org Signed-off-by:Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
the patch that fixed an endless loop in_fq_pie_init() was not considering that 65535 is a valid class id. The correct bugfix for this infinite loop is to change 'idx' to become an u32, like Colin proposed in the past [1]. Fix this as follows: - restore 65536 as maximum possible values of 'flows_cnt' - use u32 'idx' when iterating on 'q->flows' - fix the TDC selftest This reverts commit bb2f930d. [1] https://lore.kernel.org/netdev/20210407163808.499027-1-colin.king@canonical.com/ CC: Colin Ian King <colin.king@canonical.com> CC: stable@vger.kernel.org Fixes: bb2f930d ("net/sched: fix infinite loop in sch_fq_pie") Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by:
-
- 23 May, 2021 3 commits
-
-
Zong Li authored
If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers. We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955f ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device. Changed in v2: - Use netif_running instead of its own flag Signed-off-by:
Zong Li <zong.li@sifive.com> Signed-off-by:
-
Stefan Roese authored
The MT7628/88 SoC(s) have other (limited) packet counter registers than currently supported in the mtk_eth_soc driver. This patch adds support for reading these registers, so that the packet statistics are correctly updated. Additionally the defines for the non-MT7628 variant packet counter registers are added and used in this patch instead of using hard coded values. Signed-off-by:
Stefan Roese <sr@denx.de> Fixes: 296c9120 ("net: ethernet: mediatek: Add MT7628/88 SoC support") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vinicius Costa Gomes authored
Add Vinicius Costa Gomes as maintainer for these qdiscs. These qdiscs are all TSN (Time Sensitive Networking) related. Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
- 21 May, 2021 8 commits
-
-
Francesco Ruggeri authored
Commit dbd1759e ("ipv6: on reassembly, record frag_max_size") filled the frag_max_size field in IP6CB in the input path. The field should also be filled in case of atomic fragments. Fixes: dbd1759e ('ipv6: on reassembly, record frag_max_size') Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
-
Íñigo Huguet authored
SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed... Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
-
Rao Shoaib authored
When TCP is used as transport and a program on the system connects to RDS port 16385, connection is accepted but denied per the rules of RDS. However, RDS connections object is left in the list. Next loopback connection will select that connection object as it is at the head of list. The connection attempt will hang as the connection object is set to connect over TCP which is not allowed The issue can be reproduced easily, use rds-ping to ping a local IP address. After that use any program like ncat to connect to the same IP address and port 16385. This will hang so ctrl-c out. Now try rds-ping, it will hang. To fix the issue this patch adds checks to disallow the connection object creation and destroys the connection object. Signed-off-by:
Rao Shoaib <rao.shoaib@oracle.com> Signed-off-by:
-
Ioana Ciornei authored
Remove Ioana Radulescu from dpaa2-eth since she is no longer working on the DPAA2 set of drivers. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Aleksander Jan Bajkowski authored
In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Florian Fainelli authored
We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII, yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's interface. Move that read until we have properly qualified the PHY interface mode. This avoids triggering a warning on 7278 platforms that have GMII ports. Fixes: 55cfeb39 ("net: dsa: bcm_sf2: add function finding RGMII register") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Julian Wiedmann authored
Discussions for network-related code should include the netdev list. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Stefan Roese authored
When updating to latest mainline for some testing on the GARDENA smart gateway based on the MT7628, I noticed that ethernet does not work any more. Commit e9229ffd ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") introduced this problem, as it missed the RX_DIM & TX_DIM configuration for this SoC variant. This patch fixes this by calling mtk_dim_rx() & mtk_dim_tx() in this case as well. Signed-off-by:
-
- 20 May, 2021 7 commits
-
-
David S. Miller authored
Joakim Zhang says: ==================== net: fixes for stmmac Two clock fixes for stmmac driver. ==================== Signed-off-by: -
Joakim Zhang authored
Fix system hang with below sequences: ~# ifconfig ethx down ~# ifconfig ethx hw ether xx:xx:xx:xx:xx:xx After ethx down, stmmac all clocks gated off and then register access causes system hang. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Joakim Zhang authored
This should be a mistake to fix conflicts when removing RFC tag to repost the patch. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by:
-
Zheyu Ma authored
When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. The KASAN's log reveals it: [ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds. Reported-by:Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
-
Aditya Srivastava authored
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. The header for drivers/net/ethernet/microchip/encx24j600 files follows this syntax, but the content inside does not comply with kernel-doc. This line was probably not meant for kernel-doc parsing, but is parsed due to the presence of kernel-doc like comment syntax(i.e, '/**'), which causes unexpected warning from kernel-doc. For e.g., running scripts/kernel-doc -none drivers/net/ethernet/microchip/encx24j600_hw.h emits: warning: expecting prototype for h(). Prototype was for _ENCX24J600_HW_H() instead Provide a simple fix by replacing such occurrences with general comment format, i.e. '/*', to prevent kernel-doc from parsing it. Signed-off-by:
-
Jesse Brandeburg authored
Check that the MTU value requested by the VF is in the supported range of MTUs before attempting to set the VF large packet enable, otherwise reject the request. This also avoids unnecessary register updates in the case of the 82599 controller. Fixes: 872844dd ("ixgbe: Enable jumbo frames support w/ SR-IOV") Co-developed-by:
Piotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
David Matlack authored
Building the nci test suite produces a binary, nci_dev, that git then tries to track. Add a .gitignore file to tell git to ignore this binary. Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
