'Regmap' should be spelled as 'regmap'. Update that.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240410202912.1659275-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

This series adds some more test cases, mainly for testing:

commit eaa03486 ("regmap: maple: Fix uninitialized symbol 'ret' warnings")
commit 00bb549d ("regmap: maple: Fix cache corruption in regcache_maple_drop()")

And the pending patch ("regmap: Add regmap_read_bypassed()")

There are also a few small improvements to the KUnit implementation.

This adds test cases to prove that regmap_read_bypassed() reads
the hardware value while the regmap is in cache-only.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-12-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a test case for dropping only some cache blocks and leaving others
unchanged.

The regmap is divided into 8 register ranges, and only 4 of these are
written with values. This creates 4 non-contiguous ranges of registers
with cached values.

One whole range is then dropped, and part of another range. A cache
sync is then performed to check that the correct registers were written,
and the correct values were written to these registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-11-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Replace the kmalloc() and kfree() in raw_read_defaults() with a
kunit_kmalloc() so that KUnit will free it automatically.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-10-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Registert a KUnit action handler to call regmap_exit() when a test
terminates. This ensures that regmap_exit() will be called if a test
function returns early or aborts.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-9-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Extend the testing of cache-sync.

- cache_sync() renamed cache_sync_marked_dirty() for clarity of
  what conditions it is testing.

- cache_sync_defaults() renamed cache_sync_defaults_marked_dirty()
  for clarity. Added code to write the register back to its default
  value to check that a dirty sync doesn't write out the default value.

- Added cache_sync_after_cache_only(). Tests syncing the cache without
  calling regcache_mark_dirty(). A register written while in cache-only
  should be written out by regcache_sync().

- Added cache_sync_default_after_cache_only. This is similar to
  cache_sync_after_cache_only(), but the register is changed to its
  default value while in cache-only. Because regcache_mark_dirty() was
  NOT called, regacache_sync() should write out the register.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-8-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Extend the testing of cache-drop.

- Added cache_drop_all_and_sync_marked_dirty(). If all registers are
  dropped from the cache a regcache_mark_dirty() followed by
  regcache_sync() should not write anything because the cache is empty.

- Added cache_drop_all_and_sync_no_defaults(). This is similar to
  cache_drop_all_and_sync_marked_dirty() except that regcache_mark_dirty()
  is NOT called. All registers were dropped so regcache_sync() should not
  write anything.

- Added cache_drop_all_and_sync_has_defaults(). This is the same as
  cache_drop_all_and_sync_no_defaults() except that the regmap has a
  table of default values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-7-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Change the tests parameterized by real_cache_types_list[] to test at some
register addresses that are not 0.

The cache_range_window_reg() test has hardcoded address assumptions that
are not present in any other tests using real_cache_types_list[] table. So
it has been given a separate parameter table, real_cache_types_only_list[],
that preserves the original parameterization.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-6-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Run the cache_drop() and cache_present() tests at blocks of addresses
that don't start at zero.

This adds a from_reg parameter to struct regmap_test_param. This is
used to set the base address of the register defaults created by
gen_regmap().

Extra entries are added to sparse_cache_types_list[] to test at non-zero
from_reg values. The cache_drop() and cache_present() tests are updated
to test at the given offset.

The aim here is to add test cases to cache_drop() for the bug fixed by
commit 00bb549d ("regmap: maple: Fix cache corruption in
regcache_maple_drop()")

But the same parameter table is used by the cache_present() test so
let's also update that to use from_reg.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-5-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a struct regmap_test_param and use it for all test cases
instead of passing various different types of param object
depending on the test case.

This makes it much easier and cleaner to expand what can be
parameterized.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-4-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use kunit_device_register() to create a real struct device for the
regmap instead of leaving it at NULL.

The main reason for this is that it allows context data to be passed
into the readable_reg/writable_reg/volatile_reg functions by attaching
it to the struct device with dev_set_drvdata().

The gen_regmap() and gen_raw_regmap() functions are updated to take a
struct kunit * argument.

A new struct regmap_test_priv has been created to hold the struct device
created by kunit_device_register(). This allows the struct to be
extended in the future to hold more private data for the test suite.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-3-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix warnings about implicit casts to __le16 and __be16 types reported
by smatch:

drivers/base/regmap/regmap-kunit.c:1118:25:
warning: cast to restricted __be16
drivers/base/regmap/regmap-kunit.c:1120:25:
warning: cast to restricted __le16
drivers/base/regmap/regmap-kunit.c:1187:33:
warning: cast to restricted __be16
drivers/base/regmap/regmap-kunit.c:1190:33:
warning: cast to restricted __le16
drivers/base/regmap/regmap-kunit.c:1302:33:
warning: cast to restricted __be16
drivers/base/regmap/regmap-kunit.c:1305:33:
warning: cast to restricted __le16

Perform a __force cast for all these.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408144600.230848-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a regmap_read_bypassed() to allow reads from the hardware registers
while the regmap is in cache-only mode.

A typical use for this is to keep the cache in cache-only mode until
the hardware has reached a valid state, but one or more status registers
must be polled to determine when this state is reached.

For example, firmware download on the cs35l56 can take several seconds if
there are multiple amps sharing limited bus bandwidth. This is too long
to block in probe() so it is done as a background task. The device must
be soft-reset to reboot the firmware and during this time the registers are
not accessible, so the cache should be in cache-only. But the driver must
poll a register to detect when reboot has completed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd3 ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull x86 fixes from Ingo Molnar:

 - Fix MCE timer reinit locking

 - Fix/improve CoCo guest random entropy pool init

 - Fix SEV-SNP late disable bugs

 - Fix false positive objtool build warning

 - Fix header dependency bug

 - Fix resctrl CPU offlining bug

* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
  x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
  x86/CPU/AMD: Track SNP host status with cc_platform_*()
  x86/cc: Add cc_platform_set/_clear() helpers
  x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
  x86/coco: Require seeding RNG with RDRAND on CoCo systems
  x86/numa/32: Include missing <asm/pgtable_areas.h>
  x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline

Pull timer fixes from Ingo Molnar:
 "Fix various timer bugs:

   - Fix a timer migration bug that may result in missed events

   - Fix timer migration group hierarchy event updates

   - Fix a PowerPC64 build warning

   - Fix a handful of DocBook annotation bugs"

* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Return early on deactivation
  timers/migration: Fix ignored event due to missing CPU update
  vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
  timers: Fix text inconsistencies and spelling
  tick/sched: Fix struct tick_sched doc warnings
  tick/sched: Fix various kernel-doc warnings
  timers: Fix kernel-doc format and add Return values
  time/timekeeping: Fix kernel-doc warnings and typos
  time/timecounter: Fix inline documentation

Pull x86 perf fix from Ingo Molnar:
 "Fix a combined PEBS events bug on x86 Intel CPUs"

* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event

Pull nfsd fixes from Chuck Lever:

 - Address a slow memory leak with RPC-over-TCP

 - Prevent another NFS4ERR_DELAY loop during CREATE_SESSION

* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
  SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP

Pull i2c fix from Wolfram Sang:
 "A host driver build fix"

* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pxa: hide unused icr_bits[] variable

Pull xfs fix from Chandan Babu:

 - Allow creating new links to special files which were not associated
   with a project quota

* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: allow cross-linking special files without project quota

Pull smb client fixes from Steve French:

 - fix to retry close to avoid potential handle leaks when server
   returns EBUSY

 - DFS fixes including a fix for potential use after free

 - fscache fix

 - minor strncpy cleanup

 - reconnect race fix

 - deal with various possible UAF race conditions tearing sessions down

* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
  smb: client: fix potential UAF in smb2_is_network_name_deleted()
  smb: client: fix potential UAF in is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_lease_break()
  smb: client: fix potential UAF in cifs_stats_proc_show()
  smb: client: fix potential UAF in cifs_stats_proc_write()
  smb: client: fix potential UAF in cifs_dump_full_key()
  smb: client: fix potential UAF in cifs_debug_files_proc_show()
  smb3: retrying on failed server close
  smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
  smb: client: handle DFS tcons in cifs_construct_tcon()
  smb: client: refresh referral without acquiring refpath_lock
  smb: client: guarantee refcounted children from parent session
  cifs: Fix caching to try to do open O_WRONLY as rdwr on server
  smb: client: fix UAF in smb2_reconnect_server()
  smb: client: replace deprecated strncpy with strscpy

srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:

  vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0

Fixes: 4535e1a4 ("x86/bugs: Fix the SRSO mitigation on Zen3/4")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405144637.17908-1-bp@kernel.org

We want to fix:

  0e110732 ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")

So merge in Linus's latest into x86/urgent to have it available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'i2c-host-fixes-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

An unused const variable kind of error has been fixed by placing
the definition of icr_bits[] inside the ifdef block where it is
used.

Merge tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "The firewire-ohci kernel module has a parameter for verbose kernel
  logging. It is well-known that it logs the spurious IRQ for bus-reset
  event due to the unmasked register for IRQ event. This update fixes
  the issue"

* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: mask bus reset interrupts between ISR and bottom half

In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.

Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb85: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.

irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.

This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.

irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.

As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes, the most important being the
  s3c64xx change which is likely to be hit during normal operation"

* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
  spi: spi-fsl-lpspi: remove redundant spi_controller_put call
  spi: s3c64xx: Use DMA mode from fifo size

Merge tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One simple regualtor fix, fixing module autoloading on tps65132"

* tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65132: Add of_match table

Pull regmap fixes from Mark Brown:
 "Richard found a nasty corner case in the maple tree code which he
  fixed, and also fixed a compiler warning which was showing up with the
  toolchain he uses and helpfully identified a possible incorrect error
  code which could have runtime impacts"

* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: Fix uninitialized symbol 'ret' warnings
  regmap: maple: Fix cache corruption in regcache_maple_drop()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Atomic queue limits fixes (Christoph)
      - Fabrics fixes (Hannes, Daniel)

 - Discard overflow fix (Li)

 - Cleanup fix for null_blk (Damien)

* tag 'block-6.9-20240405' of git://git.kernel.dk/linux:
  nvme-fc: rename free_ctrl callback to match name pattern
  nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
  nvmet: implement unique discovery NQN
  nvme: don't create a multipath node for zero capacity devices
  nvme: split nvme_update_zone_info
  nvme-multipath: don't inherit LBA-related fields for the multipath node
  block: fix overflow in blk_ioctl_discard()
  nullblk: Fix cleanup order in null_add_dev() error path

Pull io_uring fixes from Jens Axboe:

 - Backport of some fixes that came up during development of the 6.10
   io_uring patches. This includes some kbuf cleanups and reference
   fixes.

 - Disable multishot read if we don't have NOWAIT support on the target

 - Fix for a dependency issue with workqueue flushing

* tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux:
  io_uring/kbuf: hold io_buffer_list reference over mmap
  io_uring/kbuf: protect io_buffer_list teardown with a reference
  io_uring/kbuf: get rid of bl->is_ready
  io_uring/kbuf: get rid of lower BGID lists
  io_uring: use private workqueue for exit work
  io_uring: disable io-wq execution of multishot NOWAIT requests
  io_uring/rw: don't allow multishot reads without NOWAIT support

Pull SCSI fixes from James Bottomley:
 "The most important is the libsas fix, which is a problem for DMA to a
  kmalloc'd structure too small causing cache line interference. The
  other fixes (all in drivers) are mostly for allocation length fixes,
  error leg unwinding, suspend races and a missing retry"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix MCQ mode dev command timeout
  scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGN
  scsi: sd: Unregister device if device_add_disk() failed in sd_probe()
  scsi: ufs: core: WLUN suspend dev/link state error recovery
  scsi: mylex: Fix sysfs buffer lengths

Pull devicetree fixes from Rob Herring:

 - Fix NIOS2 boot with external DTB

 - Add missing synchronization needed between fw_devlink and DT overlay
   removals

 - Fix some unit-address regex's to be hex only

 - Drop some 10+ year old "unstable binding" statements

 - Add new SoCs to QCom UFS binding

 - Add TPM bindings to TPM maintainers

* tag 'devicetree-fixes-for-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  nios2: Only use built-in devicetree blob if configured to do so
  dt-bindings: timer: narrow regex for unit address to hex numbers
  dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
  dt-bindings: remoteproc: ti,davinci: remove unstable remark
  dt-bindings: clock: ti: remove unstable remark
  dt-bindings: clock: keystone: remove unstable remark
  of: module: prevent NULL pointer dereference in vsnprintf()
  dt-bindings: ufs: qcom: document SM6125 UFS
  dt-bindings: ufs: qcom: document SC7180 UFS
  dt-bindings: ufs: qcom: document SC8180X UFS
  of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
  driver core: Introduce device_link_wait_removal()
  docs: dt-bindings: add missing address/size-cells to example
  MAINTAINERS: Add TPM DT bindings to TPM maintainers

Merge tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "8 hotfixes, 3 are cc:stable

  There are a couple of fixups for this cycle's vmalloc changes and one
  for the stackdepot changes. And a fix for a very old x86 PAT issue
  which can cause a warning splat"

* tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  stackdepot: rename pool_index to pool_index_plus_1
  x86/mm/pat: fix VM_PAT handling in COW mappings
  MAINTAINERS: change vmware.com addresses to broadcom.com
  selftests/mm: include strings.h for ffsl
  mm: vmalloc: fix lockdep warning
  mm: vmalloc: bail out early in find_vmap_area() if vmap is not init
  init: open output files from cpio unpacking with O_LARGEFILE
  mm/secretmem: fix GUP-fast succeeding on secretmem folios

Pull arm64 fix from Catalin Marinas:
 "arm64/ptrace fix to use the correct SVE layout based on the saved
  floating point state rather than the TIF_SVE flag. The latter may be
  left on during syscalls even if the SVE state is discarded"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/ptrace: Use saved floating point state type to determine SVE layout

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for an __{get,put}_kernel_nofault to avoid an uninitialized
   value causing spurious failures

 - compat_vdso.so.dbg is now installed to the standard install location

 - A fix to avoid initializing PERF_SAMPLE_BRANCH_*-related events, as
   they aren't supported and will just later fail

 - A fix to make AT_VECTOR_SIZE_ARCH correct now that we're providing
   AT_MINSIGSTKSZ

 - pgprot_nx() is now implemented, which fixes vmap W^X protection

 - A fix for the vector save/restore code, which at least manifests as
   corrupted vector state when a signal is taken

 - A fix for a race condition in instruction patching

 - A fix to avoid leaking the kernel-mode GP to userspace, which is a
   kernel pointer leak that can be used to defeat KASLR in various ways

 - A handful of smaller fixes to build warnings, an overzealous printk,
   and some missing tracing annotations

* tag 'riscv-for-linus-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: process: Fix kernel gp leakage
  riscv: Disable preemption when using patch_map()
  riscv: Fix warning by declaring arch_cpu_idle() as noinstr
  riscv: use KERN_INFO in do_trap
  riscv: Fix vector state restore in rt_sigreturn()
  riscv: mm: implement pgprot_nx
  riscv: compat_vdso: align VDSOAS build log
  RISC-V: Update AT_VECTOR_SIZE_ARCH for new AT_MINSIGSTKSZ
  riscv: Mark __se_sys_* functions __used
  drivers/perf: riscv: Disable PERF_SAMPLE_BRANCH_* while not supported
  riscv: compat_vdso: install compat_vdso.so.dbg to /lib/modules/*/vdso/
  riscv: hwprobe: do not produce frtace relocation
  riscv: Fix spurious errors from __get/put_kernel_nofault
  riscv: mm: Fix prototype to avoid discarding const

Pull s390 fixes from Alexander Gordeev:

 - Fix missing NULL pointer check when determining guest/host fault

 - Mark all functions in asm/atomic_ops.h, asm/atomic.h and
   asm/preempt.h as __always_inline to avoid unwanted instrumentation

 - Fix removal of a Processor Activity Instrumentation (PAI) sampling
   event in PMU device driver

 - Align system call table on 8 bytes

* tag 's390-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/entry: align system call table on 8 bytes
  s390/pai: fix sampling event removal for PMU device driver
  s390/preempt: mark all functions __always_inline
  s390/atomic: mark all functions __always_inline
  s390/mm: fix NULL pointer dereference

Pull power management fix from Rafael Wysocki:
 "Fix a recent Energy Model change that went against a recent scheduler
  change made independently (Vincent Guittot)"

* tag 'pm-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: EM: fix wrong utilization estimation in em_cpu_energy()

Pull thermal control fixes from Rafael Wysocki:
 "These fix two power allocator thermal governor issues and an ACPI
  thermal driver regression that all were introduced during the 6.8
  development cycle.

  Specifics:

   - Allow the power allocator thermal governor to bind to a thermal
     zone without cooling devices and/or without trip points (Nikita
     Travkin)

   - Make the ACPI thermal driver register a tripless thermal zone when
     it cannot find any usable trip points instead of returning an error
     from acpi_thermal_add() (Stephen Horvath)"

* tag 'thermal-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_power_allocator: Allow binding without trip points
  thermal: gov_power_allocator: Allow binding without cooling devices
  ACPI: thermal: Register thermal zones without valid trip points