- 15 Jun, 2021 5 commits
-
-
Krzysztof Kozlowski authored
The RTC on S2MPS13 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Link: https://lore.kernel.org/r/20210614193309.20248-2-krzysztof.kozlowski@canonical.comSigned-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-11-krzysztof.kozlowski@canonical.comSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree chagnes for 5.14: - New board support: i.MX8MM Gateworks GW7901 board. - Add SPBA bus description for i.MX8MN and i.MX8MM. - A series of update on imx8mq-nitrogen board to add USB OTG/Host and LT8912 MIPI-DSI to HDMI support. - Correct enet clock description for i.MX8 Connection Subsystem. - A couple of patches from Heiko Schocher to add FlexSPI device for i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som. - Remove the reference to audio IPG clock on i.MX8MP. - Enable EQOS Ethernet and PMIC device support for imx8mp-evk. - Disable USB over-current on imx8mm-evk and imx8mn-evk. - Add dma-ranges description for i.MX8MM and i.MX8MN SoC. - Add PCIe clock description for i.MX8MQ SoC. - Enable PCIe support on freeway board. - Enable OPTEE support on ls1028a-rdb board. * tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits) arm64: dts: imx8mn-evk: disable over current for usb arm64: dts: imx8mm-evk: disable over current for usb1 arm64: dts: freescale: Separate each group of data in the property 'reg' arm64: dts: imx8: conn: fix enet clock setting arm64: dts: imx8mq: assign PCIe clocks arm64: dts: imx8mn: specify dma-ranges arm64: dts: imx8mm: specify dma-ranges arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges arm64: dts: imx8mn-beacon-som: Assign PMIC clock arm64: dts: ls208xa: remove bus-num from dspi node arm64: dts: ls1012a: enable PCIe on freeway board arm64: dts: imx8mp-evk: enable EQOS ethernet arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy arm64: dts: imx8mm: Add spba1 and spba2 buses arm64: dts: imx8mn: Add spba1 bus arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI arm64: dts: imx8mq-nitrogen: add USB HOST support arm64: dts: imx8mq-nitrogen: add USB OTG support arm64: dts: imx8mp-phycore-som: enable spi nor ... Link: https://lore.kernel.org/r/20210613082544.16067-5-shawnguo@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxOlof Johansson authored
i.MX device tree changes for 5.14: - New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA board, GE B1x5v2 boards. - A series from Christoph Niedermaier to correct imx6q-dhcom descriptions, add device aliases and ethernet VIO regulator. - Correct Ethernet node name for imx51-digi-connectcore-som and imx53-ard board to comply DT schema. - A couple of update on imx6dl-yapp4 board, configuring OLED display segment offset, and using aliases to set custom MMC device indexes. - A series from Oleksij Rempel and Robin van der Gracht to update Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1. - A series from Shengjiu Wang to improve various audio support on NXP reference boards. - Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency. * tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits) ARM: dts: imx6: Add GE B1x5v2 ARM: dts: imx6q-dhcom: Add ethernet VIO regulator ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems ARM: dts: imx6q-dhcom: Fix ethernet reset time properties ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97 ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes ARM: dts: imx6dl-prtvt7: Enable the VPU ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node. ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node ARM: dts: imx53-ard: Correct Ethernet node name ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detect ... Link: https://lore.kernel.org/r/20210613082544.16067-4-shawnguo@kernel.orgSigned-off-by:
-
Olof Johansson authored
Merge tag 'imx-bindings-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX dt-bindings update for 5.14: - Add vendor prefixes for congatec GmbH and DaSheng, Inc. - Add compatibles for i.MX6Q DaSheng COM-9XX SBC, GE B1x5pv2 and i.MX8MM GW7901 boards. - Add an optional 'resets' property for i.MX GPCv2 bindings. * tag 'imx-bindings-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: add GE B1x5pv2 boards dt-bindings: vendor-prefixes: add congatec dt-bindings: imx: gpcv2: add support for optional resets dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC dt-bindings: add dasheng vendor prefix dt-bindings: arm: imx: add imx8mm gw7901 support Link: https://lore.kernel.org/r/20210613082544.16067-3-shawnguo@kernel.orgSigned-off-by:
-
Olof Johansson authored
Merge tag 'keystone_dts_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt ARM: DTS: Keystone K2G cleanup for v5.13 - Rename message manager node - Rename the TI-SCI node and clock - assign clock to McAsp * tag 'keystone_dts_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: k2g-evm: Move audio oscillator assigned clock to mcasp ARM: dts: keystone: k2g: Rename the TI-SCI clocks node name ARM: dts: keystone: k2g: Rename the TI-SCI node ARM: dts: keystone: k2g: Rename message-manager node Link: https://lore.kernel.org/r/1623564020-9958-1-git-send-email-santosh.shilimkar@oracle.comSigned-off-by:
-
- 12 Jun, 2021 35 commits
-
-
Corentin Labbe authored
The SL3516 SoC has a crypto offloader IP. This patch adds it on the gemini SoC Device-tree. Link: https://lore.kernel.org/r/20210611220501.684997-1-linus.walleij@linaro.orgSigned-off-by:
Corentin Labbe <clabbe@baylibre.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to improve the Allwinner SoCs support, mainly: - I2S Support for the V3 - Audio Codec Support for the V3s - DMA support for the V3s - PWM support for the V3s - Support for Bluetooth Audio on the pinephone - Add A10-like timers to the A64 and R40 - New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5 * tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits) ARM: dts: sun8i: v3s: enable emac for zero Dock arm64: dts: allwinner: pinephone: Set audio card name ARM: dts: sun8i: r40: Add timer node ARM: dts: sun8i: V3: add I2S interface to V3 dts dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible ARM: dts: sun8i: V3: add codec analog frontend to V3 dts ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA ARM: dts: sun8i: v3s: add DMA controller to v3s dts ARM: dts: sun8i: v3s: add pwm controller to v3s dts dt-bindings: pwm: allwinner: add v3s pwm compatible arm64: dts: allwinner: h5: Add NanoPi R1S H5 support dt-bindings: arm: Add NanoPi R1S H5 arm64: dts: allwinner: pinephone: Add support for Bluetooth audio arm64: dts: allwinner: a64: Allow multiple DAI links arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3 arm64: dts: allwinner: a64: Allow using multiple codec DAIs ARM: dts: sun8i-a33: Allow using multiple codec DAIs ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells ... Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhostSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxOlof Johansson authored
AT91 dt for 5.14: - A fix for sama5d4 gpio mux - A trivial fix for DT documentation * tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: i2c: at91: fix example for scl-gpios ARM: dts: at91: sama5d4: fix pinctrl muxing Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - split hardware encoder block into two devices. mt8167: - add pm domains, multi-media system (mmsys), SMI, local arbiter (larb) and IOMMU nodes. mt8183: - Add new chromebooks: HP Chromebook 11a, Acer Chromebook 311, HP Chromebook x360 11MK G3 EE, Lenovo IdeaPad Flex 3. - add power domain to SMI common node. - add power supplies for EEPROM node. * tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits) arm64: dts: mt8183: Add node for the Mali GPU arm64: dts: mt8183-kukui: Add tboard thermal zones arm64: dts: mt8183: add cbas node under cros_ec arm64: dts: mt8183: add supply name for eeprom arm64: dts: mt8183: remove syscon from smi_common node arm64: dts: mt8183: Add kukui-jacuzzi-fennel board arm64: dts: mt8183: Add kukui-jacuzzi-kenzo board arm64: dts: mt8183: Add kukui-jacuzzi-burnet board arm64: dts: mt8183: Add kukui-jacuzzi-willow board arm64: dts: mt8183: Add kukui-jacuzzi-kappa board dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-fennel dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kenzo dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-burnet dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-willow dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kappa arm64: dts: mediatek: mt8167: add iommu node arm64: dts: mediatek: mt8167: add larb nodes arm64: dts: mediatek: mt8167: add smi_common node arm64: dts: mediatek: mt8167: add mmsys node arm64: dts: mediatek: mt8167: add power domains ... Link: https://lore.kernel.org/r/117d5eb5-bc99-70bb-a1a9-d7141fe96527@gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v5.14 - Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs, - Document support for the new RZ/G2L SMARC EVK board. * tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller dt-bindings: arm: renesas: Document SMARC EVK dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC Link: https://lore.kernel.org/r/cover.1623403802.git.geert+renesas@glider.beSigned-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 (take two) - External interrupt (INTC-EX) support for the R-Car M3-W+ SoC, - Initial support for the new RZ/G2L SoC on the RZ/G2L SMARC EVK board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r9a07g044: Add SYSC node arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's dt-bindings: clock: Add r9a07g044 CPG Clock Definitions arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node arm64: dts: renesas: r8a77961: Add INTC-EX device node ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keys ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keys ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys ARM: dts: lager: Configure pull-up for SOFT_SW GPIO keys arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages arm64: dts: renesas: Add missing opp-suspend properties Link: https://lore.kernel.org/r/cover.1623403796.git.geert+renesas@glider.beSigned-off-by:
-
Olof Johansson authored
Merge tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv8 Juno fix for v5.14 Just a single fix to use standard and generic nodes names for SCMI power domain controller and clock controller devicetree nodes. * tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: Update SCPI nodes as per the YAML schema Link: https://lore.kernel.org/r/20210611075805.2813712-1-sudeep.holla@arm.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Some Ux500 DTS updates for v5.14: - Fix interrupt cells, GPIO controller node names in accordance with new YAML schemas. - Add proper compatible strings for Broadcomm Wifi and BT. - Fix upp and add some mount matrices for accelerometers so e.g. UI:s work as they should. - Drop the DRDY pin assignment for a non-existing pin on a magnetometer. * tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Fix orientation of Janice accelerometer ARM: dts: href: Mount matrices for TVK R2 ARM: dts: ux500: Fix some compatible strings ARM: dts: ux500: Drop drdy pin assignment from magnetometer ARM: dts: ux500: Fix orientation of accelerometer ARM: dts: ux500: Rename gpio-controller node ARM: dts: ux500: Fix interrupt cells Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.comSigned-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM64-based SoCs changes for 5.14, please pull the following: - Zhen fixes the Broadcom stingray serial node unit names to fix a DT binding warning * tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: normalize the node name of the UART devices Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.comSigned-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.14, please pull the following: - Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS files to resolve a number of DT binding check warnings pertaining to NAND, pinmux, clocks, SPI - Stefan provides a fix for an increase in the DWC2 controller's RX FIFO causing regressions on the Raspberry Pi 4B - Mateusz adds a BCM2711 specific VEC compatible string to allow keying off that variant properly - Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI re-organization work and finally adding the DTS file proper * tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Add reference to RPi 400 ARM: dts: Add Raspberry Pi 400 support ARM: dts: bcm283x: Fix up GPIO LED node names dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema ARM: dts: Move BCM2711 RPi specific into separate dtsi ARM: dts: bcm283x: Fix up MMC node names ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size" ARM: dts: BCM5301X: Fixup SPI binding dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema ARM: dts: BCM5301X: Fix pinmux subnodes names ARM: dts: Hurricane 2: Fix NAND nodes names ARM: dts: BCM63xx: Fix NAND nodes names ARM: NSP: dts: fix NAND nodes names ARM: Cygnus: dts: fix NAND nodes names ARM: brcmstb: dts: fix NAND nodes names ARM: dts: BCM5301X: Fix NAND nodes names Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.14, round 1 Highlights: ----------- MCU part: - Fixes for Yaml verifications MPU part: - Configure qspi's mdma transfer to block for stm32mp151 - ST boards: - Fixes for yaml verifications - DH boards: - Fixes for yaml verifications - Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence. - Odyssey boards: - fix Sd card detectection (gpio line updated) - fix eMMC VQMMC suuply (use vdd instead of v3v3) * tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: fix stpmic node for stm32mp1 boards ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply ARM: dts: stm32: add a new DCMI pins group on stm32mp15 ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 dt-bindings: net: document ptp_ref clk in dwmac ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings ARM: dts: stm32: fix RCC node name on stm32f429 MCU ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2 ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.14 1. Several cleanups and alignment with dtschema. This includes removal of unused properties and fixing LED brightness property. 2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for example from Suspend to RAM where the PMIC RTC's power is still supplied). 3. Disable unused/not implemented camera on GT-I9100. * tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Disable unused camera input for I9100 ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420 ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3 ARM: dts: exynos: enable PMIC wakeup from suspend on Midas ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412 ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4 ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1 ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3 ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100 ARM: dts: exynos: align Broadcom WiFi with dtschema Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.14 - IBM Rainier and Everest LED descriptions. These systems have a large number of LEDs attached via expanders. - Ampere Mt Jade updates, as OpenBMC bringup continues for this machine. - Updated 64MB flash layout for systems using OpenBMC on NOR root file systems. - Support for HS200 MMC on AST2600 EVB. This is only supported from A2, so a new device tree is added to support A0 and A1. - Update all command lines for early serial output. * tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: everest: Add pcie cable card indicator leds ARM: dts: aspeed: everest: Add vrm and other indicator leds ARM: dts: aspeed: everest: Add dimm indicator leds ARM: dts: aspeed: everest: Add pcie slot indicator leds ARM: dts: aspeed: everest: Add nvme and fan indicator leds ARM: dts: aspeed: everest: Add system level indicator leds ARM: dts: aspeed-g5: Add SCU phandle to GFX node ARM: dts: aspeed: Everest: Add directly controlled LEDs ARM: dts: aspeed: Rainier 4U: Remove fan updates ARM: dts: aspeed: Everest: Fix cable card PCA chips ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout ARM: dts: aspeed: mtjade: switch to 64MB flash layout ARM: dts: aspeed: mtjade: Add PSU support ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI ARM: dts: aspeed: Set earlycon boot argument ARM: dts: aspeed-g6: Add pinctrl settings ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0 ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller. ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb. Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.comSigned-off-by:
-
Linus Walleij authored
Add the crypto engine as a child of the NPE. Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Olof Johansson authored
Merge tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM64 DT changed for v5.14: - set 128bytes FIFO size on uart A - add Banana PI BPI-M5 board dts & bindings - meson-sm1: add toacodec node to use internal audio DAC - enable hdmi audio loopback on VIM3 board * tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: set 128bytes FIFO size on uart A arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts dt-bindings: arm: amlogic: add Banana PI M5 bindings arm64: dts: meson-sm1: add toacodec node arm64: dts: meson: vim3: enable hdmi audio loopback Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.14 merge window Mostly just clean-up for device tree binding checks with few other clean-up patches: - Drop ov5640 sensor for dra76-evm, it's just one of the optional additional sensors and makes hard to use any of the other options, TI is using the devicetree overlay snippets for these - Group the phandles in osd3358-sm-red to make the files more readable - A series of gpio clean-up patches to follow the binding documentation - Move ti,no-reset related properties to the target module level, the ti-sysc driver handles them also in the child but they really belong to the target module - Drop the unnecessary uart compatible entries to make the binding check to work - Mailbox related updates to make the binding check to work * tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes ARM: dts: OMAP2420: Drop interrupt-names from mailbox node ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema ARM: dts: omap5-board-common: align gpio hog names with dt-schema ARM: dts: omap3: align gpio hog names with dt-schema ARM: dts: am437x: align gpio hog names with dt-schema ARM: dts: am335x: align GPIO hog names with dt-schema ARM: dts: osd3358-sm-red: group in the same phandle all its properties ARM: dts: dra76-evm: remove ov5640 Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 - GPIO extender support for the Falcon development board, - Switches support for the ALT development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: alt: Add SW2 as GPIO keys ARM: dts: renesas: Move enable-method to CPU nodes arm64: dts: renesas: beacon: Fix USB ref clock references arm64: dts: renesas: beacon: Fix USB extal reference ARM: dts: rcar-gen1: Correct internal delay for i2c[123] arm64: dts: renesas: eagle: Add x1 clock ARM: dts: koelsch: Rename sw2 to keyboard ARM: dts: r8a7779, marzen: Fix DU clock names arm64: dts: renesas: v3msk: Fix memory size arm64: dts: renesas: condor: Switch eMMC bus to 1V8 arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders arm64: dts: renesas: beacon kit: Setup AVB refclk arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.beSigned-off-by:
-
Olof Johansson authored
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini device tree updates for the v5.14 kernel: - MAINTAINERS fix for the DTS files - Drop a duplicate ethernet node on the RUT1xx DTS - Add device_type to the PCI node - Fix up some DTS syntax so it agrees with the schemas merged for the v5.14 merge window * tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: remove xxx-cells from display ARM: dts: gemini-dlink-dir-685: Remove address from display port ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c ARM: dts: gemini: convert obsolete SPI properties ARM: dts: gemini: use the right rtc compatible ARM: dts: gemini: add device_type on pci ARM: dts: gemini-rut1xx: remove duplicate ethernet node ARM: dts: gemini: rename mdio to the right name MAINTAINERS: gemini: add missing dts pattern Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS updates for the v5.14 kernel: - Add ethernet to the boards - Add PCI hosts to the boards - Create an expansion bus around the flash memory - Add the beeper to NSLU2 completing the NSLU2 DTS * tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix up the IXP4xx ethernet nodes ARM: dts: ixp4xx: Add beeper to the NSLU2 ARM: dts: ixp4xx: Create a proper expansion bus ARM: dts: ixp4xx: Add PCI hosts ARM: dts: ixp4xx: Add ethernet Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.comSigned-off-by:
-
Corentin Labbe authored
This patch adds devicetree for intel-ixp42x-welltech-epbx100. Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.comSigned-off-by:
-
Corentin Labbe authored
Adds welltech,epbx100 as a valid intel-ixp4xx board. Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.comSigned-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Corentin Labbe authored
Add vendor prefix for Welltech computer Co Ld. Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.comSigned-off-by:
-
Li Jun authored
imx8mn evk board usb port does not support over current detection, so disable it. Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Li Jun authored
imx8mm evk board usb1 port does not support over current detection, so disable it. Signed-off-by:
-
Sebastian Reichel authored
Document the compatible for GE B1x5pv2 boards. Acked-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Sebastian Reichel authored
Document binding for congatec. Acked-by:
-
Zhen Lei authored
Do not write the 'reg' of multiple groups of data into a uint32 array, use <> to separate them. Otherwise, the errors similar to the following will be reported by reg.yaml. arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml: soc: pcie@3400000:reg:0: \ [0, 54525952, 0, 1048576, 64, 0, 0, 8192] is too long Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by:
-
Dong Aisheng authored
enet_clk_ref actually is sourced from internal gpr clocks which needs a default rate. Also update enet lpcg clock output names to be more straightforward. Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Lucas Stach authored
This fixes multiple issues with the current non-existent PCIe clock setup: The controller can run at up to 250MHz, so use a parent that provides this clock. The PHY needs an exact 100MHz reference clock to function if the PCIe refclock is not fed in via the refclock pads. While this mode is not supported (yet) in the driver it doesn't hurt to make sure we are providing a clock with the right rate. The AUX clock is specified to have a maximum clock rate of 10MHz. So the current setup, which drives it straight from the 25MHz oscillator is actually overclocking the AUX input. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Lucas Stach authored
DMA addressing capabilities on i.MX8MN are limited by the interconnect, same as on i.MX8MQ. Add dma-ranges to the the peripheral bus to let the kernel know about this. Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
-
Lucas Stach authored
DMA addressing capabilities on i.MX8MM are limited by the interconnect, same as on i.MX8MQ. Add dma-ranges to the the peripheral bus to let the kernel know about this. Signed-off-by:
-
Kornel Duleba authored
Currently all PCIE windows point to bus address 0x0, which does not match the values obtained from hardware during EA. Replace those values with CPU addresses, since in reality we have a 1:1 mapping between the two. Signed-off-by:
Kornel Duleba <mindal@semihalf.com> Acked-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Adam Ford authored
The PMIC throws an errors because the clock isn't assigned to it. Fix this by assigning the clocks info. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Mian Yousaf Kaukab authored
On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module then its probe fails with the following warning: [ 10.471363] couldn't get idr [ 10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0 ... [ 10.471651] fsl-dspi 2100000.spi: Problem registering DSPI ctlr [ 10.471708] fsl-dspi: probe of 2100000.spi failed with error -16 Reason for the failure is that bus-num property is set for dspi node. However, bus-num property is not set for the qspi node. If probe for spi-fsl-qspi happens first then id 0 is dynamically allocated to it. Call to spi_register_controller() from spi-fsl-dspi driver then fails. Since commit 29d2daf2 ("spi: spi-fsl-dspi: Make bus-num property optional") bus-num property is optional. Remove bus-num property from dspi node to fix the issue. Signed-off-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by:
-
Mian Yousaf Kaukab authored
ls1012a-freeway board contains a M.2 2230 slot. Update the status of pcei1 node to okay so that the pcie controller can be probed. Signed-off-by:
-
