- 15 Apr, 2023 40 commits
-
-
Hans de Goede authored
atomisp_get_metadata_type() always returns ATOMISP_MAIN_METADATA, replace its uses with ATOMISP_MAIN_METADATA and remove it. Link: https://lore.kernel.org/r/20230221145906.8113-7-hdegoede@redhat.comReviewed-by:
Andy Shevchenko <andy@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hans de Goede authored
Remove the now unused atomisp_css_enable_raw_binning() function. Link: https://lore.kernel.org/r/20230221145906.8113-6-hdegoede@redhat.comReviewed-by:
-
Hans de Goede authored
Remove the crop_needs_override local helper variable from atomisp_set_fmt(), as it always is true now. Link: https://lore.kernel.org/r/20230221145906.8113-5-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
After the continues-mode removal the delayed-work never gets queues remove all the related code. Link: https://lore.kernel.org/r/20230221145906.8113-4-hdegoede@redhat.comReviewed-by:
-
Hans de Goede authored
Continues mode is a special mode where 2 /dev/video devices can be active at the same time. Either the video-preview + video nodes or the viewfinder (for still capture) + capture nodes. For the video-preview + video-recording case modern userspace will use a single stream multiplexed by pipewire. The still-capture case is extra special only starting the preview stream and then relying on a custom ATOMISP_IOC_S_CONT_CAPTURE_CONFIG ioctl to set things up followed by a second stream on to capture the amount of configured still pictures. While running the sensor at full resolution all the time. This case too is better handled with dma-buf + GPU downscaling for the view-finder rather then all this custom special code. Besises this the ioctl expects a bunch of special non error checked conditions to be met otherwise things will crash/hang. The continues mode also involves a special cases all over the code getting in the way of further cleanups and simplifying the code to using just 1 /dev/video# node. So lets remove it and the related custom ATOMISP_IOC_S_CONT_CAPTURE_CONFIG ioctl. Link: https://lore.kernel.org/linux-media/ea81b17b-7d1f-a5e1-11dd-04db310e1e50@redhat.com/ Link: https://lore.kernel.org/r/20230221145906.8113-3-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Remove support for depth mode. This is a special mode where 2 streams (from 2 different sensors) can be setup and then starting/stopping 1 will automatically also start/stop the other. Like many of these special features I'm pretty sure that if the queue setup is not done exactly right things will crash and there is no error checking for this. This seems to be for stereoscopic vision and the only known hw which actually supports this is the Intel Aero board/SDK, all other 1000+ BYT/CHT models don't need this. This false outside of the standard webcam use scenario which we are trying to get working and this involves a bunch of hacks / special exceptions all over the code, so lets remove this. Link: https://lore.kernel.org/linux-media/ea81b17b-7d1f-a5e1-11dd-04db310e1e50@redhat.com/ Link: https://lore.kernel.org/r/20230221145906.8113-2-hdegoede@redhat.comReviewed-by:
-
Laurent Pinchart authored
The vs6624 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v4.17. The driver hasn't been used since them. Drop it. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Laurent Pinchart authored
The sr030pc30 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v2.6.37. Drop it. Signed-off-by:
-
Laurent Pinchart authored
The s5k6aa camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by:
-
Laurent Pinchart authored
The noon010pc30 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.16. A device tree file referencing the device has been added in v3.17, but without corresponding DT bindings, and with DT support in the driver. The driver thus hasn't been used since v316. Drop it. Signed-off-by:
-
Laurent Pinchart authored
The mt9t001 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.2. Drop it. Signed-off-by:
-
Laurent Pinchart authored
The mt9m032 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.4. Drop it. Signed-off-by:
-
Laurent Pinchart authored
The m5mols camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by:
-
Laurent Pinchart authored
The ad9389b video encoder driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.7. Drop it. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
-
Ming Qian authored
enable encoding 12-bit extended jpeg Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Ming Qian authored
enable decoding 12-bit extended jpeg Signed-off-by:
-
Ming Qian authored
clear slot next desc ptr if config error, otherwise codec will report config error interrupt repeatedly, it may led to system hang. Signed-off-by:
-
Ming Qian authored
remove the unused parameter ctx Signed-off-by:
-
Ming Qian authored
ABGR64_12 is a reversed RGB format with alpha channel last, 12 bits per component like ABGR32, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. Signed-off-by:
-
Ming Qian authored
BGR48_12 is a reversed RGB format with 12 bits per component like BGR24, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. Signed-off-by:
-
Ming Qian authored
YUV48_12 is a YUV format with 12-bits per component like YUV24, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. [hverkuil: replaced a . by ,] Signed-off-by:
-
Ming Qian authored
Y212 is a YUV format with 12-bits per component like YUYV, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. Add the missing v4l2 foramt info of Y212 Signed-off-by:
-
Ming Qian authored
Y012 is a luma-only formats with 12-bits per pixel, expanded to 16bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. Signed-off-by:
-
Ming Qian authored
P012 is a YUV format with 12-bits per component with interleaved UV, like NV12, expanded to 16 bits. Data in the 12 high bits, zeros in the 4 low bits, arranged in little endian order. And P012M has two non contiguous planes. Signed-off-by:
-
Tomi Valkeinen authored
Add new ioctls to set and get subdev client capabilities. Client in this context means the userspace application which opens the subdev device node. The client capabilities are stored in the file handle of the opened subdev device node, and the client must set the capabilities for each opened subdev. For now we only add a single flag, V4L2_SUBDEV_CLIENT_CAP_STREAMS, which indicates that the client is streams-aware. The reason for needing such a flag is as follows: Many structs passed via ioctls, e.g. struct v4l2_subdev_format, contain reserved fields (usually a single array field). These reserved fields can be used to extend the ioctl. The userspace is required to zero the reserved fields. We recently added a new 'stream' field to many of these structs, and the space for the field was taken from these reserved arrays. The assumption was that these new 'stream' fields are always initialized to zero if the userspace does not use them. This was a mistake, as, as mentioned above, the userspace is required to zero the _reserved_ fields. In other words, there is no requirement to zero this new stream field, and if the userspace doesn't use the field (which is the case for all userspace applications at the moment), the field may contain random data. This shows that the way the reserved fields are defined in v4l2 is, in my opinion, somewhat broken, but there is nothing to do about that. To fix this issue we need a way for the userspace to tell the kernel that the userspace has indeed set the 'stream' field, and it's fine for the kernel to access it. This is achieved with the new ioctl, which the userspace should usually use right after opening the subdev device node. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
-
Hans Verkuil authored
With these changes it now passes the v4l2-compliance test. Signed-off-by:
-
Hans Verkuil authored
V4L2_STD_ALL advertises more standards than these boards actually support. This causes a V4L2 compliance issue. Limit the supported standards to those that are actually implemented. Signed-off-by:
-
Hans Verkuil authored
The vbi stream comes from the same video input as the video stream. So all the related ioctls to that are just as valid for the vbi stream. Add these. This fixes a V4L2 compliance issue. Signed-off-by:
-
Hans Verkuil authored
Support for VIDIOC_TRY_FMT for the vbi device was missing. Add it. This fixes a V4L2 compliance issue. Signed-off-by:
-
Hans Verkuil authored
The tuner input uses different tvnorms compared to the S-Video/Composite inputs. So update the tvnorms field in struct video_device when switching inputs. This fixes a V4L2 compliance issue. Signed-off-by:
-
Hans Verkuil authored
If the requested TV standard is identical to the current TV standard, then return 0, even when the vb2 queues are busy. This fixes a V4L2 compliance issue. Signed-off-by:
-
Hans Verkuil authored
There was no check for the minimum width and height, so 0 values were just passed on. Fix this. Signed-off-by:
-
Hans Verkuil authored
The initial field value of the format is ANY, which isn't allowed. Change to INTERLACED. VIDIOC_TRY_FMT will overwrite vv->last_field, which is an unwanted side-effect, so drop this. And finally vidioc_s_fmt_vid_cap didn't initialize vv->last_field correctly. Signed-off-by:
-
Hans Verkuil authored
Convert this driver from the old videobuf framework to the vb2 frame. Signed-off-by:
-
Hans Verkuil authored
When building the pgtables, use for_each_sg_dma_page. Also clean up the code a bit. Signed-off-by:
-
Hans Verkuil authored
The U and V components were swapped. Drop the FORMAT_BYTE_SWAP to fix this. Signed-off-by:
-
Hans Verkuil authored
No need for BUG_ON, WARN_ON is a lot friendlier. Signed-off-by:
-
Hans Verkuil authored
No need for BUG_ON, WARN_ON is a lot friendlier. Signed-off-by:
-
Hans Verkuil authored
Use the video_fmt in saa7146_vv instead of having a pointer to it in struct saa7146_buf. Signed-off-by:
-
Hans Verkuil authored
Instead use vv->resources and video_drvdata(file) to obtain this information. This prepares for the vb2 conversion later when saa7146_fh is dropped completely. Signed-off-by:
-
