- 14 Nov, 2014 27 commits
-
-
Artem Bityutskiy authored
commit 052c2807 upstream. Hu (hujianyang@huawei.com) discovered a race condition which may lead to a situation when UBIFS is unable to mount the file-system after an unclean reboot. The problem is theoretical, though. In UBIFS, we have the log, which basically a set of LEBs in a certain area. The log has the tail and the head. Every time user writes data to the file-system, the UBIFS journal grows, and the log grows as well, because we append new reference nodes to the head of the log. So the head moves forward all the time, while the log tail stays at the same position. At any time, the UBIFS master node points to the tail of the log. When we mount the file-system, we scan the log, and we always start from its tail, because this is where the master node points to. The only occasion when the tail of the log changes is the commit operation. The commit operation has 2 phases - "commit start" and "commit end". The former is relatively short, and does not involve much I/O. During this phase we mostly just build various in-memory lists of the things which have to be written to the flash media during "commit end" phase. During the commit start phase, what we do is we "clean" the log. Indeed, the commit operation will index all the data in the journal, so the entire journal "disappears", and therefore the data in the log become unneeded. So we just move the head of the log to the next LEB, and write the CS node there. This LEB will be the tail of the new log when the commit operation finishes. When the "commit start" phase finishes, users may write more data to the file-system, in parallel with the ongoing "commit end" operation. At this point the log tail was not changed yet, it is the same as it had been before we started the commit. The log head keeps moving forward, though. The commit operation now needs to write the new master node, and the new master node should point to the new log tail. After this the LEBs between the old log tail and the new log tail can be unmapped and re-used again. And here is the possible problem. We do 2 operations: (a) We first update the log tail position in memory (see 'ubifs_log_end_commit()'). (b) And then we write the master node (see the big lock of code in 'do_commit()'). But nothing prevents the log head from moving forward between (a) and (b), and the log head may "wrap" now to the old log tail. And when the "wrap" happens, the contends of the log tail gets erased. Now a power cut happens and we are in trouble. We end up with the old master node pointing to the old tail, which was erased. And replay fails because it expects the master node to point to the correct log tail at all times. This patch merges the abovementioned (a) and (b) operations by moving the master node change code to the 'ubifs_log_end_commit()' function, so that it runs with the log mutex locked, which will prevent the log from being changed benween operations (a) and (b). Reported-by:
hujianyang <hujianyang@huawei.com> Tested-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Artem Bityutskiy authored
commit 07e19dff upstream. The 'mst_mutex' is not needed since because 'ubifs_write_master()' is only called on the mount path and commit path. The mount path is sequential and there is no parallelism, and the commit path is also serialized - there is only one commit going on at a time. Signed-off-by:
-
Eric Rannaud authored
commit 69a91c23 upstream. The man page for open(2) indicates that when O_CREAT is specified, the 'mode' argument applies only to future accesses to the file: Note that this mode applies only to future accesses of the newly created file; the open() call that creates a read-only file may well return a read/write file descriptor. The man page for open(2) implies that 'mode' is treated identically by O_CREAT and O_TMPFILE. O_TMPFILE, however, behaves differently: int fd = open("/tmp", O_TMPFILE | O_RDWR, 0); assert(fd == -1); assert(errno == EACCES); int fd = open("/tmp", O_TMPFILE | O_RDWR, 0600); assert(fd > 0); For O_CREAT, do_last() sets acc_mode to MAY_OPEN only: if (*opened & FILE_CREATED) { /* Don't check for write permission, don't truncate */ open_flag &= ~O_TRUNC; will_truncate = false; acc_mode = MAY_OPEN; path_to_nameidata(path, nd); goto finish_open_created; } But for O_TMPFILE, do_tmpfile() passes the full op->acc_mode to may_open(). This patch lines up the behavior of O_TMPFILE with O_CREAT. After the inode is created, may_open() is called with acc_mode = MAY_OPEN, in do_tmpfile(). A different, but related glibc bug revealed the discrepancy: https://sourceware.org/bugzilla/show_bug.cgi?id=17523 The glibc lazily loads the 'mode' argument of open() and openat() using va_arg() only if O_CREAT is present in 'flags' (to support both the 2 argument and the 3 argument forms of open; same idea for openat()). However, the glibc ignores the 'mode' argument if O_TMPFILE is in 'flags'. On x86_64, for open(), it magically works anyway, as 'mode' is in RDX when entering open(), and is still in RDX on SYSCALL, which is where the kernel looks for the 3rd argument of a syscall. But openat() is not quite so lucky: 'mode' is in RCX when entering the glibc wrapper for openat(), while the kernel looks for the 4th argument of a syscall in R10. Indeed, the syscall calling convention differs from the regular calling convention in this respect on x86_64. So the kernel sees mode = 0 when trying to use glibc openat() with O_TMPFILE, and fails with EACCES. Signed-off-by:
Eric Rannaud <e@nanocritical.com> Acked-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tetsuo Handa authored
commit 475d0db7 upstream. total_objects could be 0 and is used as a denom. While total_objects is a "long", total_objects == 0 unlikely happens for 3.12 and later kernels because 32-bit architectures would not be able to hold (1 << 32) objects. However, total_objects == 0 may happen for kernels between 3.1 and 3.11 because total_objects in prune_super() was an "int" and (e.g.) x86_64 architecture might be able to hold (1 << 32) objects. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Mikulas Patocka authored
commit c2ca0fcd upstream. This patch makes it possible to kill a process looping in cont_expand_zero. A process may spend a lot of time in this function, so it is desirable to be able to kill it. It happened to me that I wanted to copy a piece data from the disk to a file. By mistake, I used the "seek" parameter to dd instead of "skip". Due to the "seek" parameter, dd attempted to extend the file and became stuck doing so - the only possibility was to reset the machine or wait many hours until the filesystem runs out of space and cont_expand_zero fails. We need this patch to be able to terminate the process. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Roger Tseng authored
commit d1419d50 upstream. Current code erroneously fill the last byte of R2 response with an undefined value. In addition, the controller actually 'offloads' the last byte (CRC7, end bit) while receiving R2 response and thus it's impossible to get the actual value. This could cause mmc stack to obtain inconsistent CID from the same card after resume and misidentify it as a different card. Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2. Fixes: ff984e57 ("mmc: Add realtek pcie sdmmc host driver") Signed-off-by:
Roger Tseng <rogerable@realtek.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Dmitry Lavnikevich authored
commit 31d9f8fa upstream. Current caching implementation during regcache_sync() call bypasses all register writes of values that are already known as default (regmap reg_defaults). Same time in TLV320AIC3x codecs register 5 (AIC3X_PLL_PROGC_REG) write should be immediately followed by register 6 write (AIC3X_PLL_PROGD_REG) even if it was not changed. Otherwise both registers will not be written. This brings to issue that appears particulary in case of 44.1kHz playback with 19.2MHz master clock. In this case AIC3X_PLL_PROGC_REG is 0x6e while AIC3X_PLL_PROGD_REG is 0x0 (same as register default). Thus AIC3X_PLL_PROGC_REG also remains not written and we get wrong playback speed. In this patch snd_soc_read() is used to get cached pll values and snd_soc_write() (unlike regcache_sync() this function doesn't bypasses hardware default values) to write them to registers. Signed-off-by:
Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Daniel Mack authored
commit e5092c96 upstream. Coverity spotted the following possible use-after-free condition in dapm_create_or_share_mixmux_kcontrol(): If kcontrol is NULL, and (wname_in_long_name && kcname_in_long_name) validates to true, 'name' will be set to an allocated string, and be freed a few lines later via the 'long_name' alias. 'name', however, is used by dev_err() in case snd_ctl_add() fails. Fix this by adding a jump label that frees 'long_name' at the end of the function. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Ondrej Zary authored
commit 6d8ca28f upstream. Currently, ata_sff_softreset is skipped for controllers with no ctl port. But that also skips ata_sff_dev_classify required for device detection. This means that libata is currently broken on controllers with no ctl port. No device connected: [ 1.872480] pata_isapnp 01:01.02: activated [ 1.889823] scsi2 : pata_isapnp [ 1.890109] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 6.888110] ata3.01: qc timeout (cmd 0xec) [ 6.888179] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 16.888085] ata3.01: qc timeout (cmd 0xec) [ 16.888147] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.888086] ata3.01: qc timeout (cmd 0xec) [ 46.888148] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 51.888100] ata3.00: qc timeout (cmd 0xec) [ 51.888160] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 61.888079] ata3.00: qc timeout (cmd 0xec) [ 61.888141] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 91.888089] ata3.00: qc timeout (cmd 0xec) [ 91.888152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) ATAPI device connected: [ 1.882061] pata_isapnp 01:01.02: activated [ 1.893430] scsi2 : pata_isapnp [ 1.893719] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 6.892107] ata3.01: qc timeout (cmd 0xec) [ 6.892171] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 16.892079] ata3.01: qc timeout (cmd 0xec) [ 16.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.892079] ata3.01: qc timeout (cmd 0xec) [ 46.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.908586] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr [ 46.924570] ata3.00: configured for PIO0 (device error ignored) [ 46.926295] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5 [ 46.984519] sr0: scsi3-mmc drive: 6x/6x xa/form2 tray [ 46.984592] cdrom: Uniform CD-ROM driver Revision: 3.20 So don't skip ata_sff_softreset, just skip the reset part of ata_bus_softreset if the ctl port is not available. This makes IDE port on ES968 behave correctly: No device connected: [ 4.670888] pata_isapnp 01:01.02: activated [ 4.673207] scsi host2: pata_isapnp [ 4.673675] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 7.081840] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k ATAPI device connected: [ 4.704362] pata_isapnp 01:01.02: activated [ 4.706620] scsi host2: pata_isapnp [ 4.706877] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 4.872782] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr [ 4.888673] ata3.00: configured for PIO0 (device error ignored) [ 4.893984] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5 [ 7.015578] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Scott Carter authored
commit 37017ac6 upstream. The Broadcom OSB4 IDE Controller (vendor and device IDs: 1166:0211) does not support 64-KB DMA transfers. Whenever a 64-KB DMA transfer is attempted, the transfer fails and messages similar to the following are written to the console log: [ 2431.851125] sr 0:0:0:0: [sr0] Unhandled sense code [ 2431.851139] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2431.851152] sr 0:0:0:0: [sr0] Sense Key : Hardware Error [current] [ 2431.851166] sr 0:0:0:0: [sr0] Add. Sense: Logical unit communication time-out [ 2431.851182] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 76 f4 00 00 40 00 [ 2431.851210] end_request: I/O error, dev sr0, sector 121808 When the libata and pata_serverworks modules are recompiled with ATA_DEBUG and ATA_VERBOSE_DEBUG defined in libata.h, the 64-KB transfer size in the scatter-gather list can be seen in the console log: [ 2664.897267] sr 9:0:0:0: [sr0] Send: [ 2664.897274] 0xf63d85e0 [ 2664.897283] sr 9:0:0:0: [sr0] CDB: [ 2664.897288] Read(10): 28 00 00 00 7f b4 00 00 40 00 [ 2664.897319] buffer = 0xf6d6fbc0, bufflen = 131072, queuecommand 0xf81b7700 [ 2664.897331] ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 7f b4 00 00 40 [ 2664.897338] ata_scsi_translate: ENTER [ 2664.897345] ata_sg_setup: ENTER, ata1 [ 2664.897356] ata_sg_setup: 3 sg elements mapped [ 2664.897364] ata_bmdma_fill_sg: PRD[0] = (0x66FD2000, 0xE000) [ 2664.897371] ata_bmdma_fill_sg: PRD[1] = (0x65000000, 0x10000) ------------------------------------------------------> ======= [ 2664.897378] ata_bmdma_fill_sg: PRD[2] = (0x66A10000, 0x2000) [ 2664.897386] ata1: ata_dev_select: ENTER, device 0, wait 1 [ 2664.897422] ata_sff_tf_load: feat 0x1 nsect 0x0 lba 0x0 0x0 0xFC [ 2664.897428] ata_sff_tf_load: device 0xA0 [ 2664.897448] ata_sff_exec_command: ata1: cmd 0xA0 [ 2664.897457] ata_scsi_translate: EXIT [ 2664.897462] leaving scsi_dispatch_cmnd() [ 2664.897497] Doing sr request, dev = sr0, block = 0 [ 2664.897507] sr0 : reading 64/256 512 byte blocks. [ 2664.897553] ata_sff_hsm_move: ata1: protocol 7 task_state 1 (dev_stat 0x58) [ 2664.897560] atapi_send_cdb: send cdb [ 2666.910058] ata_bmdma_port_intr: ata1: host_stat 0x64 [ 2666.910079] __ata_sff_port_intr: ata1: protocol 7 task_state 3 [ 2666.910093] ata_sff_hsm_move: ata1: protocol 7 task_state 3 (dev_stat 0x51) [ 2666.910101] ata_sff_hsm_move: ata1: protocol 7 task_state 4 (dev_stat 0x51) [ 2666.910129] sr 9:0:0:0: [sr0] Done: [ 2666.910136] 0xf63d85e0 TIMEOUT lspci shows that the driver used for the Broadcom OSB4 IDE Controller is pata_serverworks: 00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8e [Master SecP SecO PriP]) Flags: bus master, medium devsel, latency 64 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=4] I/O ports at 1440 [size=16] Kernel driver in use: pata_serverworks The pata_serverworks driver supports five distinct device IDs, one being the OSB4 and the other four belonging to the CSB series. The CSB series appears to support 64-KB DMA transfers, as tests on a machine with an SAI2 motherboard containing a Broadcom CSB5 IDE Controller (vendor and device IDs: 1166:0212) showed no problems with 64-KB DMA transfers. This problem was first discovered when attempting to install openSUSE from a DVD on a machine with an STL2 motherboard. Using the pata_serverworks module, older releases of openSUSE will not install at all due to the timeouts. Releases of openSUSE prior to 11.3 can be installed by disabling the pata_serverworks module using the brokenmodules boot parameter, which causes the serverworks module to be used instead. Recent releases of openSUSE (12.2 and later) include better error recovery and will install, though very slowly. On all openSUSE releases, the problem can be recreated on a machine containing a Broadcom OSB4 IDE Controller by mounting an install DVD and running a command similar to the following: find /mnt -type f -print | xargs cat > /dev/null The patch below corrects the problem. Similar to the other ATA drivers that do not support 64-KB DMA transfers, the patch changes the ata_port_operations qc_prep vector to point to a routine that breaks any 64-KB segment into two 32-KB segments and changes the scsi_host_template sg_tablesize element to reduce by half the number of scatter/gather elements allowed. These two changes affect only the OSB4. Signed-off-by:
Scott Carter <ccscott@funsoft.com> Signed-off-by:
-
Guenter Roeck authored
commit bb2e226b upstream. This reverts commit 3189eddb ("percpu: free percpu allocation info for uniprocessor system"). The commit causes a hang with a crisv32 image. This may be an architecture problem, but at least for now the revert is necessary to be able to boot a crisv32 image. Cc: Tejun Heo <tj@kernel.org> Cc: Honggang Li <enjoymindful@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Trond Myklebust authored
commit 2aca5b86 upstream. The flag RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT was intended introduced in order to allow NFSv4 clients to disable resend timeouts. Since those cause the RPC layer to break the connection, they mess up the duplicate reply caches that remain indexed on the port number in NFSv4.. This patch includes the code that was missing in the original to set the appropriate flag in struct rpc_clnt, when the caller of rpc_create() sets RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT. Fixes: 8a19a0b6 (SUNRPC: Add RPC task and client level options to...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Benjamin Coddington authored
commit a743419f upstream. When aborting a connection to preserve source ports, don't wake the task in xs_error_report. This allows tasks with RPC_TASK_SOFTCONN to succeed if the connection needs to be re-established since it preserves the task's status instead of setting it to the status of the aborting kernel_connect(). This may also avoid a potential conflict on the socket's lock. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
-
Benjamin Coddington authored
commit 173b3afc upstream. If rpc.statd is restarted, upcalls to monitor hosts can fail with ECONNREFUSED. In that case force a lookup of statd's new port and retry the upcall. Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit de11b0e8 ] These drivers now call ipv6_proxy_select_ident(), which is defined only if CONFIG_INET is enabled. However, they have really depended on CONFIG_INET for as long as they have allowed sending GSO packets from userland. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr") Fixes: b9fb9ee0 ("macvtap: add GSO/csum offload support") Fixes: 5188cd44 ("drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 5188cd44 ] UFO is now disabled on all drivers that work with virtio net headers, but userland may try to send UFO/IPv6 packets anyway. Instead of sending with ID=0, we should select identifiers on their behalf (as we used to). Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 3d0ad094 ] IPv6 does not allow fragmentation by routers, so there is no fragmentation ID in the fixed header. UFO for IPv6 requires the ID to be passed separately, but there is no provision for this in the virtio net protocol. Until recently our software implementation of UFO/IPv6 generated a new ID, but this was a bug. Now we will use ID=0 for any UFO/IPv6 packet passed through a tap, which is even worse. Unfortunately there is no distinction between UFO/IPv4 and v6 features, so disable UFO on taps and virtio_net completely until we have a proper solution. We cannot depend on VM managers respecting the tap feature flags, so keep accepting UFO packets but log a warning the first time we do this. Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 4062090e ] ip_setup_cork() called inside ip_append_data() steals dst entry from rt to cork and in case errors in __ip_append_data() nobody frees stolen dst entry Fixes: 2e77d89b ("net: avoid a pair of dst_hold()/dst_release() in ip_append_data()") Signed-off-by:
Vasily Averin <vvs@parallels.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Tom Herbert authored
[ Upstream commit 14051f04 ] Currently, skb_inner_network_header is used but this does not account for Ethernet header for ETH_P_TEB. Use skb_inner_mac_header which handles TEB and also should work with IP encapsulation in which case inner mac and inner network headers are the same. Tested: Ran TCP_STREAM over GRE, worked as expected. Signed-off-by:
Tom Herbert <therbert@google.com> Acked-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 349ce993 ] percpu tcp_md5sig_pool contains memory blobs that ultimately go through sg_set_buf(). -> sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); This requires that whole area is in a physically contiguous portion of memory. And that @buf is not backed by vmalloc(). Given that alloc_percpu() can use vmalloc() areas, this does not fit the requirements. Replace alloc_percpu() by a static DEFINE_PER_CPU() as tcp_md5sig_pool is small anyway, there is no gain to dynamically allocate it. Signed-off-by:
Crestez Dan Leonard <cdleonard@gmail.com> Signed-off-by:
-
Ian Morgan authored
[ Upstream commit 95ff8868 ] The following patch fixes a bug which causes the ax88179_178a driver to be incapable of being added to a bond. When I brought up the issue with the bonding maintainers, they indicated that the real problem was with the NIC driver which must return zero for success (of setting the MAC address). I see that several other NIC drivers follow that pattern by either simply always returing zero, or by passing through a negative (error) result while rewriting any positive return code to zero. With that same philisophy applied to the ax88179_178a driver, it allows it to work correctly with the bonding driver. I believe this is suitable for queuing in -stable, as it's a small, simple, and obvious fix that corrects a defect with no other known workaround. This patch is against vanilla 3.17(.0). Signed-off-by:
Ian Morgan <imorgan@primordial.ca> drivers/net/usb/ax88179_178a.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) Signed-off-by:
-
Li RongQing authored
[ Upstream commit 1245dfc8 ] pskb_may_pull() maybe change skb->data and make eth pointer oboslete, so set eth after pskb_may_pull() Fixes:3d7b46cd("ip_tunnel: push generic protocol handling to ip_tunnel module") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 7a9f526f ] pskb_may_pull maybe change skb->data and make eth pointer oboslete, so eth needs to reload Fixes: 91269e39 ("vxlan: using pskb_may_pull as early as possible") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 91269e39 ] pskb_may_pull should be used to check if skb->data has enough space, skb->len can not ensure that. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit ce6502a8 ] when netif_rx() is done, the netif_rx handled skb maybe be freed, and should not be used. Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit f76936d0 ] fib_nh_match does not match nexthops correctly. Example: ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \ nexthop via 192.168.122.13 dev eth0 ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \ nexthop via 192.168.122.15 dev eth0 Del command is successful and route is removed. After this patch applied, the route is correctly matched and result is: RTNETLINK answers: No such process Please consider this for stable trees as well. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
-
Rabin Vincent authored
commit 086ba77a upstream. ARM has some private syscalls (for example, set_tls(2)) which lie outside the range of NR_syscalls. If any of these are called while syscall tracing is being performed, out-of-bounds array access will occur in the ftrace and perf sys_{enter,exit} handlers. # trace-cmd record -e raw_syscalls:* true && trace-cmd report ... true-653 [000] 384.675777: sys_enter: NR 192 (0, 1000, 3, 4000022, ffffffff, 0) true-653 [000] 384.675812: sys_exit: NR 192 = 1995915264 true-653 [000] 384.675971: sys_enter: NR 983045 (76f74480, 76f74000, 76f74b28, 76f74480, 76f76f74, 1) true-653 [000] 384.675988: sys_exit: NR 983045 = 0 ... # trace-cmd record -e syscalls:* true [ 17.289329] Unable to handle kernel paging request at virtual address aaaaaace [ 17.289590] pgd = 9e71c000 [ 17.289696] [aaaaaace] *pgd=00000000 [ 17.289985] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 17.290169] Modules linked in: [ 17.290391] CPU: 0 PID: 704 Comm: true Not tainted 3.18.0-rc2+ #21 [ 17.290585] task: 9f4dab00 ti: 9e710000 task.ti: 9e710000 [ 17.290747] PC is at ftrace_syscall_enter+0x48/0x1f8 [ 17.290866] LR is at syscall_trace_enter+0x124/0x184 Fix this by ignoring out-of-NR_syscalls-bounds syscall numbers. Commit cd0980fc "tracing: Check invalid syscall nr while tracing syscalls" added the check for less than zero, but it should have also checked for greater than NR_syscalls. Link: http://lkml.kernel.org/p/1414620418-29472-1-git-send-email-rabin@rab.in Fixes: cd0980fc "tracing: Check invalid syscall nr while tracing syscalls" Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
- 30 Oct, 2014 13 commits
-
-
Greg Kroah-Hartman authored
-
David S. Miller authored
[ Upstream commit 06090e8e ] It is not sufficient to only implement get_user_pages_fast(), you must also implement the atomic version __get_user_pages_fast() otherwise you end up using the weak symbol fallback implementation which simply returns zero. This is dangerous, because it causes the futex code to loop forever if transparent hugepages are supported (see get_futex_key()). Signed-off-by:
-
David S. Miller authored
[ Upstream commit ef3e035c ] Meelis Roos reported that kernels built with gcc-4.9 do not boot, we eventually narrowed this down to only impacting machines using UltraSPARC-III and derivitive cpus. The crash happens right when the first user process is spawned: [ 54.451346] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 54.451346] [ 54.571516] CPU: 1 PID: 1 Comm: init Not tainted 3.16.0-rc2-00211-gd7933ab7 #96 [ 54.666431] Call Trace: [ 54.698453] [0000000000762f8c] panic+0xb0/0x224 [ 54.759071] [000000000045cf68] do_exit+0x948/0x960 [ 54.823123] [000000000042cbc0] fault_in_user_windows+0xe0/0x100 [ 54.902036] [0000000000404ad0] __handle_user_windows+0x0/0x10 [ 54.978662] Press Stop-A (L1-A) to return to the boot prom [ 55.050713] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Further investigation showed that compiling only per_cpu_patch() with an older compiler fixes the boot. Detailed analysis showed that the function is not being miscompiled by gcc-4.9, but it is using a different register allocation ordering. With the gcc-4.9 compiled function, something during the code patching causes some of the %i* input registers to get corrupted. Perhaps we have a TLB miss path into the firmware that is deep enough to cause a register window spill and subsequent restore when we get back from the TLB miss trap. Let's plug this up by doing two things: 1) Stop using the firmware stack for client interface calls into the firmware. Just use the kernel's stack. 2) As soon as we can, call into a new function "start_early_boot()" to put a one-register-window buffer between the firmware's deepest stack frame and the top-most initial kernel one. Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
Dave Kleikamp authored
[ Upstream commit 1cef94c3 ] This is the longest boot string that silo supports. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by:
-
David S. Miller authored
[ Upstream commit d195b71b ] swapper_low_pmd_dir and swapper_pud_dir are actually completely useless and unnecessary. We just need swapper_pg_dir[]. Naturally the other page table chunks will be allocated on an as-needed basis. Since the kernel actually accesses these tables in the PAGE_OFFSET view, there is not even a TLB locality advantage of placing them in the kernel image. Use the hard coded vmlinux.ld.S slot for swapper_pg_dir which is naturally page aligned. Increase MAX_BANKS to 1024 in order to handle heavily fragmented virtual guests. Even with this MAX_BANKS increase, the kernel is 20K+ smaller. Signed-off-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
bob picco authored
[ Upstream commit ee6a9333 ] This patch attempts to do a few things. The highlights are: 1) enable SPARSE_IRQ unconditionally, 2) kills off !SPARSE_IRQ code 3) allocates ivector_table at boot time and 4) default to cookie only VIRQ mechanism for supported firmware. The first firmware with cookie only support for me appears on T5. You can optionally force the HV firmware to not cookie only mode which is the sysino support. The sysino is a deprecated HV mechanism according to the most recent SPARC Virtual Machine Specification. HV_GRP_INTR is what controls the cookie/sysino firmware versioning. The history of this interface is: 1) Major version 1.0 only supported sysino based interrupt interfaces. 2) Major version 2.0 added cookie based VIRQs, however due to the fact that OSs were using the VIRQs without negoatiating major version 2.0 (Linux and Solaris are both guilty), the VIRQs calls were allowed even with major version 1.0 To complicate things even further, the VIRQ interfaces were only actually hooked up in the hypervisor for LDC interrupt sources. VIRQ calls on other device types would result in HV_EINVAL errors. So effectively, major version 2.0 is unusable. 3) Major version 3.0 was created to signal use of VIRQs and the fact that the hypervisor has these calls hooked up for all interrupt sources, not just those for LDC devices. A new boot option is provided should cookie only HV support have issues. hvirq - this is the version for HV_GRP_INTR. This is related to HV API versioning. The code attempts major=3 first by default. The option can be used to override this default. I've tested with SPARSE_IRQ on T5-8, M7-4 and T4-X and Jalap?no. Signed-off-by:
-
David S. Miller authored
[ Upstream commit bb4e6e85 ] In order to accomodate embedded per-cpu allocation with large numbers of cpus and numa nodes, we have to use as much virtual address space as possible for the vmalloc region. Otherwise we can get things like: PERCPU: max_distance=0x380001c10000 too large for vmalloc space 0xff00000000 So, once we select a value for PAGE_OFFSET, derive the size of the vmalloc region based upon that. Signed-off-by:
-
David S. Miller authored
Make sure, at compile time, that the kernel can properly support whatever MAX_PHYS_ADDRESS_BITS is defined to. On M7 chips, use a max_phys_bits value of 49. Based upon a patch by Bob Picco. Signed-off-by:
-
David S. Miller authored
[ Upstream commit c06240c7 ] For sparse memory configurations, the vmemmap array behaves terribly and it takes up an inordinate amount of space in the BSS section of the kernel image unconditionally. Just build huge PMDs and look them up just like we do for TLB misses in the vmalloc area. Kernel BSS shrinks by about 2MB. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 0dd5b7b0 ] If max_phys_bits needs to be > 43 (f.e. for T4 chips), things like DEBUG_PAGEALLOC stop working because the 3-level page tables only can cover up to 43 bits. Another problem is that when we increased MAX_PHYS_ADDRESS_BITS up to 47, several statically allocated tables became enormous. Compounding this is that we will need to support up to 49 bits of physical addressing for M7 chips. The two tables in question are sparc64_valid_addr_bitmap and kpte_linear_bitmap. The first holds a bitmap, with 1 bit for each 4MB chunk of physical memory, indicating whether that chunk actually exists in the machine and is valid. The second table is a set of 2-bit values which tell how large of a mapping (4MB, 256MB, 2GB, 16GB, respectively) we can use at each 256MB chunk of ram in the system. These tables are huge and take up an enormous amount of the BSS section of the sparc64 kernel image. Specifically, the sparc64_valid_addr_bitmap is 4MB, and the kpte_linear_bitmap is 128K. So let's solve the space wastage and the DEBUG_PAGEALLOC problem at the same time, by using the kernel page tables (as designed) to manage this information. We have to keep using large mappings when DEBUG_PAGEALLOC is disabled, and we do this by encoding huge PMDs and PUDs. On a T4-2 with 256GB of ram the kernel page table takes up 16K with DEBUG_PAGEALLOC disabled and 256MB with it enabled. Furthermore, this memory is dynamically allocated at run time rather than coded statically into the kernel image. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 8c82dc0e ] As currently coded the KTSB accesses in the kernel only support up to 47 bits of physical addressing. Adjust the instruction and patching sequence in order to support arbitrary 64 bits addresses. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 4397bed0 ] Now that we use 4-level page tables, we can provide up to 53-bits of virtual address space to the user. Adjust the VA hole based upon the capabilities of the cpu type probed. Signed-off-by:
-
David S. Miller authored
[ Upstream commit ac55c768 ] This has become necessary with chips that support more than 43-bits of physical addressing. Based almost entirely upon a patch by Bob Picco. Signed-off-by:
-
