The driver's method to retrieve the firmware version on ili2117/
ili2118 chip flavours is incorrect. The firmware version register
address and layout are wrong.

The firmware version is not actually used anywhere inside or
outside this driver. There is a dev_dbg() print, but that is
only visible when the developer explicitly compiles in debug
support.

Don't make the code more complicated to preserve a feature that
no-one is using. Remove all code associated with chip firmware
version.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20191112164429.11225-1-TheSven73@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

device_get_match_data is available now, so we can replace the call
to of_device_get_match_data and remove the FIXME comment.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20191007203343.101466-2-stephan@gerhold.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Bring in improvements to ili2xxx driver, including support for
2117A/2118A controllers.

When I2C client is instantiated with I2C_CLIENT_WAKE flag (either via
"wakeup-source" device property, or via board info flag), it will mark the
main IRQ line as wakeup IRQ, which will ensure that it will be enabled for
wakeup when system transitions to suspend state. Since our suspend/resume
handlers were only managing IRQ wakeup state, they are no longer needed,
and can be removed.

Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

I2C devices that are supposed to be wakeup sources should be instantiated
with I2C_CLIENT_WAKE flag (which can be either set by in board info, or
retrieved from "wakeup-source" property); individual drivers should not be
marking devices as wakeup sources unconditionally.

Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of doing if/else if/else on the chip's model number let's define
chip operations structure and use it to perform indirect calls. With number
of protocols supported by the driver growing, this makes it better
maintainable.

This change includes fixes to checks whether the driver should continue
polling the controller by Sven Van Asbroeck <thesven73@gmail.com>.

Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We are using devm_input_allocate_device() that set's up the parent for
us, no need to do it ourselves.

Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

input_mt_init_slots() may fail and we need to handle such failures.

Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's switch the driver to using threaded IRQ so that we do not need to
manage the interrupt and work separately, and we do not acknowledge
interrupt until we finished handling it completely.

Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Tested-by: Marek Vasut <marex@denx.de> #  ILI2117
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add support for ILI2117 touch controller. This controller is similar
to the ILI210x and ILI251x, except for the following differences:
- Reading out of touch data must happen at most 300 mS after the
  interrupt line was asserted. No command must be sent, the data
  are returned upon pure I2C read of 43 bytes long.
- Supports 10 simultaneous touch inputs.
- Touch data format is slightly different.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org> # for DT binding
Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Update example in ad7879 device tree documentation to use generic touch
controller node names.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191026090403.3057-3-marcel@ziswiler.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fix spelling mistake.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/1573211947-660-1-git-send-email-f.suligoi@asem.itSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The body of the for loop is only ever run once as the second standard_report
element is never changed from its initial zero init, so the loop condition is
never satisfies after the first run. Equally the start member of the first
element is never changed from 0, so the index offset is always a constant 0.

Remove this needless obfuscation of the code and write it in a straight
forward manner.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191104114454.10500-3-l.stach@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts kxtj9 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.

note that with regular input devices handling polling, there is no longer a
benefit in having separate INPUT_KXTJ9_POLLED_MODE config option.

Link: https://lore.kernel.org/r/20191017204217.106453-23-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Using devm API allows to clean up error handling and drop the remove()
method.

Link: https://lore.kernel.org/r/20191017204217.106453-22-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts bma150 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-21-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver can be cleaned up by using managed resource helpers.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
[dtor: do not explicitly set parent of input device since we are using devm]
Link: https://lore.kernel.org/r/20191017204217.106453-20-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts mma8450 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-19-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts gpio_decoder driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-18-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts rb532_button driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-17-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Using devm API allows us to clean up error handling paths and drop the
remove() method.

Link: https://lore.kernel.org/r/20191017204217.106453-16-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts sgi_btns driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-15-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Switching to devm API allows to clean up error handling paths and drop
the remove() method.

Link: https://lore.kernel.org/r/20191017204217.106453-14-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts cobalt_btns driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-13-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This simplifies error handling and allows to remove cobalt_buttons_remove()
method.

Link: https://lore.kernel.org/r/20191017204217.106453-12-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts wistron_btns driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-11-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts apanel driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.

While at it, let's convert the driver to use devm.

Link: https://lore.kernel.org/r/20191017204217.106453-10-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts gpio_keys_polled driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Note that we still keep polled and non-polled gpio-keys drivers separate,
as they are different enough and mixing them up would make the code pretty
confusing.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20191017204217.106453-9-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts jornada680_kbd driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20191017204217.106453-8-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts clps711x-keypad driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Also use managed API when allocating input device, this allows us to remove
clps711x_keypad_remove() method.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20191017204217.106453-7-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts adc-keys driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20191017204217.106453-6-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts tsc6507x-ts driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-5-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts ts4800-ts driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-4-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts sur40 driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-3-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts raspberrypi-ts driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-2-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts psxpad-spi driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191001220421.GA66693@dtor-wsSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org> # bindings
Link: https://lore.kernel.org/r/20191029005806.3577376-2-megous@megous.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Switch the driver to the slotted variant of multitouch protocol (MT-B)
with in-kernel tracking of the contacts.
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The receiving buffer is allocated separately from the main driver
data structure, and is naturally DMA-safe, so mark it as such when
building I2C transfer message.
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

devm_input_allocate_device() already sets parent device for us.
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>