KVM x86 misc changes for 6.9:

 - Explicitly initialize a variety of on-stack variables in the emulator that
   triggered KMSAN false positives (though in fairness in KMSAN, it's comically
   difficult to see that the uninitialized memory is never truly consumed).

 - Fix the deubgregs ABI for 32-bit KVM, and clean up code related to reading
   DR6 and DR7.

 - Rework the "force immediate exit" code so that vendor code ultimately
   decides how and when to force the exit.  This allows VMX to further optimize
   handling preemption timer exits, and allows SVM to avoid sending a duplicate
   IPI (SVM also has a need to force an exit).

 - Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
   vCPU creation ultimately failed, and add WARN to guard against similar bugs.

 - Provide a dedicated arch hook for checking if a different vCPU was in-kernel
   (for directed yield), and simplify the logic for checking if the currently
   loaded vCPU is in-kernel.

 - Misc cleanups and fixes.

KVM common MMU changes for 6.9:

  - Harden KVM against underflowing the active mmu_notifier invalidation
    count, so that "bad" invalidations (usually due to bugs elsehwere in the
    kernel) are detected earlier and are less likely to hang the kernel.

  - Fix a benign bug in __kvm_mmu_topup_memory_cache() where the object size
    and number of objects parameters to kvmalloc_array() were swapped.

KVM async page fault changes for 6.9:

 - Always flush the async page fault workqueue when a work item is being
   removed, especially during vCPU destruction, to ensure that there are no
   workers running in KVM code when all references to KVM-the-module are gone,
   i.e. to prevent a use-after-free if kvm.ko is unloaded.

 - Grab a reference to the VM's mm_struct in the async #PF worker itself instead
   of gifting the worker a reference, e.g. so that there's no need to remember
   to *conditionally* clean up after the worker.

KVM selftests changes for 6.9:

 - Add macros to reduce the amount of boilerplate code needed to write "simple"
   selftests, and to utilize selftest TAP infrastructure, which is especially
   beneficial for KVM selftests with multiple testcases.

 - Add basic smoke tests for SEV and SEV-ES, along with a pile of library
   support for handling private/encrypted/protected memory.

 - Fix benign bugs where tests neglect to close() guest_memfd files.

KVM/riscv changes for 6.9

- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM

KVM/arm64 updates for 6.9

 - Infrastructure for building KVM's trap configuration based on the
   architectural features (or lack thereof) advertised in the VM's ID
   registers

 - Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
   x86's WC) at stage-2, improving the performance of interacting with
   assigned devices that can tolerate it

 - Conversion of KVM's representation of LPIs to an xarray, utilized to
   address serialization some of the serialization on the LPI injection
   path

 - Support for _architectural_ VHE-only systems, advertised through the
   absence of FEAT_E2H0 in the CPU's ID register

 - Miscellaneous cleanups, fixes, and spelling corrections to KVM and
   selftests

Merge tag 'loongarch-kvm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.9

* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.

KVM GUEST_MEMFD fixes for 6.8:

 - Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
   avoid creating ABI that KVM can't sanely support.

 - Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
   clear that such VMs are purely a development and testing vehicle, and
   come with zero guarantees.

 - Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
   is to support confidential VMs with deterministic private memory (SNP
   and TDX) only in the TDP MMU.

 - Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
   when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.

* kvm-arm64/kerneldoc:
  : kerneldoc warning fixes, courtesy of Randy Dunlap
  :
  : Fixes addressing the widespread misuse of kerneldoc-style comments
  : throughout KVM/arm64.
  KVM: arm64: vgic: fix a kernel-doc warning
  KVM: arm64: vgic-its: fix kernel-doc warnings
  KVM: arm64: vgic-init: fix a kernel-doc warning
  KVM: arm64: sys_regs: fix kernel-doc warnings
  KVM: arm64: PMU: fix kernel-doc warnings
  KVM: arm64: mmu: fix a kernel-doc warning
  KVM: arm64: vhe: fix a kernel-doc warning
  KVM: arm64: hyp/aarch32: fix kernel-doc warnings
  KVM: arm64: guest: fix kernel-doc warnings
  KVM: arm64: debug: fix kernel-doc warnings
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/vfio-normal-nc:
  : Normal-NC support for vfio-pci @ stage-2, courtesy of Ankit Agrawal
  :
  : KVM's policy to date has been that any and all MMIO mapping at stage-2
  : is treated as Device-nGnRE. This is primarily done due to concerns of
  : the guest triggering uncontainable failures in the system if they manage
  : to tickle the device / memory system the wrong way, though this is
  : unnecessarily restrictive for devices that can be reasoned as 'safe'.
  :
  : Unsurprisingly, the Device-* mapping can really hurt the performance of
  : assigned devices that can handle Gathering, and can be an outright
  : correctness issue if the guest driver does unaligned accesses.
  :
  : Rather than opening the floodgates to the full ecosystem of devices that
  : can be exposed to VMs, take the conservative approach and allow PCI
  : devices to be mapped as Normal-NC since it has been determined to be
  : 'safe'.
  vfio: Convey kvm that the vfio-pci device is wc safe
  KVM: arm64: Set io memory s2 pte as normalnc for vfio pci device
  mm: Introduce new flag to indicate wc safe
  KVM: arm64: Introduce new flag for non-cacheable IO memory
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/lpi-xarray:
  : xarray-based representation of vgic LPIs
  :
  : KVM's linked-list of LPI state has proven to be a bottleneck in LPI
  : injection paths, due to lock serialization when acquiring / releasing a
  : reference on an IRQ.
  :
  : Start the tedious process of reworking KVM's LPI injection by replacing
  : the LPI linked-list with an xarray, leveraging this to allow RCU readers
  : to walk it outside of the spinlock.
  KVM: arm64: vgic: Don't acquire the lpi_list_lock in vgic_put_irq()
  KVM: arm64: vgic: Ensure the irq refcount is nonzero when taking a ref
  KVM: arm64: vgic: Rely on RCU protection in vgic_get_lpi()
  KVM: arm64: vgic: Free LPI vgic_irq structs in an RCU-safe manner
  KVM: arm64: vgic: Use atomics to count LPIs
  KVM: arm64: vgic: Get rid of the LPI linked-list
  KVM: arm64: vgic-its: Walk the LPI xarray in vgic_copy_lpi_list()
  KVM: arm64: vgic-v3: Iterate the xarray to find pending LPIs
  KVM: arm64: vgic: Use xarray to find LPI in vgic_get_lpi()
  KVM: arm64: vgic: Store LPIs in an xarray
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/vm-configuration: (29 commits)
  : VM configuration enforcement, courtesy of Marc Zyngier
  :
  : Userspace has gained the ability to control the features visible
  : through the ID registers, yet KVM didn't take this into account as the
  : effective feature set when determing trap / emulation behavior. This
  : series adds:
  :
  :  - Mechanism for testing the presence of a particular CPU feature in the
  :    guest's ID registers
  :
  :  - Infrastructure for computing the effective value of VNCR-backed
  :    registers, taking into account the RES0 / RES1 bits for a particular
  :    VM configuration
  :
  :  - Implementation of 'fine-grained UNDEF' controls that shadow the FGT
  :    register definitions.
  KVM: arm64: Don't initialize idreg debugfs w/ preemption disabled
  KVM: arm64: Fail the idreg iterator if idregs aren't initialized
  KVM: arm64: Make build-time check of RES0/RES1 bits optional
  KVM: arm64: Add debugfs file for guest's ID registers
  KVM: arm64: Snapshot all non-zero RES0/RES1 sysreg fields for later checking
  KVM: arm64: Make FEAT_MOPS UNDEF if not advertised to the guest
  KVM: arm64: Make AMU sysreg UNDEF if FEAT_AMU is not advertised to the guest
  KVM: arm64: Make PIR{,E0}_EL1 UNDEF if S1PIE is not advertised to the guest
  KVM: arm64: Make TLBI OS/Range UNDEF if not advertised to the guest
  KVM: arm64: Streamline save/restore of HFG[RW]TR_EL2
  KVM: arm64: Move existing feature disabling over to FGU infrastructure
  KVM: arm64: Propagate and handle Fine-Grained UNDEF bits
  KVM: arm64: Add Fine-Grained UNDEF tracking information
  KVM: arm64: Rename __check_nv_sr_forward() to triage_sysreg_trap()
  KVM: arm64: Use the xarray as the primary sysreg/sysinsn walker
  KVM: arm64: Register AArch64 system register entries with the sysreg xarray
  KVM: arm64: Always populate the trap configuration xarray
  KVM: arm64: nv: Move system instructions to their own sys_reg_desc array
  KVM: arm64: Drop the requirement for XARRAY_MULTI
  KVM: arm64: nv: Turn encoding ranges into discrete XArray stores
  ...
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/misc:
  : Miscellaneous updates
  :
  :  - Fix handling of features w/ nonzero safe values in set_id_regs
  :    selftest
  :
  :  - Cleanup the unused kern_hyp_va() asm macro
  :
  :  - Differentiate nVHE and hVHE in boot-time message
  :
  :  - Several selftests cleanups
  :
  :  - Drop bogus return value from kvm_arch_create_vm_debugfs()
  :
  :  - Make save/restore of SPE and TRBE control registers affect EL1 state
  :    in hVHE mode
  :
  :  - Typos
  KVM: arm64: Fix TRFCR_EL1/PMSCR_EL1 access in hVHE mode
  KVM: selftests: aarch64: Remove unused functions from vpmu test
  KVM: arm64: Fix typos
  KVM: Get rid of return value from kvm_arch_create_vm_debugfs()
  KVM: selftests: Print timer ctl register in ISTATUS assertion
  KVM: selftests: Fix GUEST_PRINTF() format warnings in ARM code
  KVM: arm64: removed unused kern_hyp_va asm macro
  KVM: arm64: add comments to __kern_hyp_va
  KVM: arm64: print Hyp mode
  KVM: arm64: selftests: Handle feature fields with nonzero minimum value correctly
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/feat_e2h0:
  : Support for FEAT_E2H0, courtesy of Marc Zyngier
  :
  : As described in the cover letter:
  :
  :   Since ARMv8.1, the architecture has grown the VHE feature, which makes
  :   EL2 a superset of EL1. With ARMv9.5 (and retroactively allowed from
  :   ARMv8.1), the architecture allows implementations to have VHE as the
  :   *only* implemented behaviour, meaning that HCR_EL2.E2H can be
  :   implemented as RES1. As a follow-up, HCR_EL2.NV1 can also be
  :   implemented as RES0, making the VHE-ness of the architecture
  :   recursive.
  :
  : This series adds support for detecting the architectural feature of E2H
  : being RES1, leveraging the existing infrastructure for handling
  : out-of-spec CPUs that are VHE-only. Additionally, the (incomplete) NV
  : infrastructure in KVM is updated to enforce E2H=1 for guest hypervisors
  : on implementations that do not support NV1.
  arm64: cpufeatures: Fix FEAT_NV check when checking for FEAT_NV1
  arm64: cpufeatures: Only check for NV1 if NV is present
  arm64: cpufeatures: Add missing ID_AA64MMFR4_EL1 to __read_sysreg_by_encoding()
  KVM: arm64: Handle Apple M2 as not having HCR_EL2.NV1 implemented
  KVM: arm64: Force guest's HCR_EL2.E2H RES1 when NV1 is not implemented
  KVM: arm64: Expose ID_AA64MMFR4_EL1 to guests
  arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative
  arm64: cpufeature: Detect HCR_EL2.NV1 being RES0
  arm64: cpufeature: Add ID_AA64MMFR4_EL1 handling
  arm64: sysreg: Add layout for ID_AA64MMFR4_EL1
  arm64: cpufeature: Correctly display signed override values
  arm64: cpufeatures: Correctly handle signed values
  arm64: Add macro to compose a sysreg field value
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

The KVM RISC-V allows Zacas extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zacas extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

The KVM RISC-V allows Ztso extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Ztso extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

The SEED CSR access from VS/VU mode (guest) will always trap to
HS-mode (KVM) when Zkr extension is available to the Guest/VM.

Forward this CSR access to KVM user space so that it can be
emulated based on the method chosen by VMM.

Fixes: f370b4e6 ("RISC-V: KVM: Allow scalar crypto extensions for Guest/VM")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Add a KVM selftests to validate the Sstc timer functionality.
The test was ported from arm64 arch timer test.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().

The code is inspired from that of x86/arm64.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Some CSR registers like CRMD/PRMD are saved during enter VM mode now.
However they are not restored for actual use, so saving for these CSR
registers can be removed.
Reviewed-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch VCPUs have their own separate HW timers. SW timer is to wake
up blocked vcpu thread, rather than HW timer emulation. When blocking
vcpu scheduled out, SW timer is used to wakeup blocked vcpu thread and
injects timer interrupt. It does not care about whether guest timer is
in period mode or oneshot mode, and SW timer needs not to be restarted
since vcpu has been woken.

This patch does not restart SW timer when it is expired.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

SW timer is enabled when vcpu thread is scheduled out, and it is to wake
up vcpu from blocked queue. If vcpu thread is scheduled out but is not
blocked, such as it is preempted by other threads, it is not necessary
to enable SW timer. Since vcpu thread is still on running queue if it is
preempted and SW timer is only to wake up vcpu on blocking queue, so SW
timer is not useful in this situation.

This patch enables SW timer only when vcpu is scheduled out and is
blocking.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Supported CPUCFG information comes from function _kvm_get_cpucfg_mask().
A bit should be zero if it is reserved by HW or if it is not supported
by KVM.

Also LoongArch software page table walk feature defined in CPUCFG2_LSPW
is supported by KVM, it should be enabled by default.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Explicitly close() guest_memfd files in various guest_memfd and
private_mem_conversions tests, there's no reason to keep the files open
until the test exits.

Fixes: 8a89efd4 ("KVM: selftests: Add basic selftest for guest_memfd()")
Fixes: 43f623f3 ("KVM: selftests: Add x86-only selftest for private memory conversions")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20240227015716.27284-1-dongli.zhang@oracle.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>

Pull phy fixes from Vinod Koul:

  - qcom: m31 pointer err fix, eusb2 fix redundant zero-out loop and v3
    offset fix on qmp-usb

  - freescale: fix for dphy alias

* tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: qcom-qmp-usb: fix v3 offsets data
  phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
  phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
  phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes

Pull dmaengine fixes from Vinod Koul:

 - dw-edma fixes to improve driver and remote HDMA setup

 - fsl-edma fixes for SoC hange, irq init and byte calculations and
   sparse fixes

 - idxd: safe user copy of completion record fix

 - ptdma: consistent DMA mask fix

* tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: ptdma: use consistent DMA masks
  dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
  dmaengine: idxd: Ensure safe user copy of completion record
  dmaengine: fsl-edma: correct max_segment_size setting
  dmaengine: idxd: Remove shadow Event Log head stored in idxd
  dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
  dmaengine: fsl-qdma: init irq after reg initialization
  dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
  dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
  dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
  dmaengine: dw-edma: Add HDMA remote interrupt configuration
  dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
  dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
  dmaengine: dw-edma: Fix the ch_count hdma callback

Pull powerpc fixes from Michael Ellerman:

 - Fix IOMMU table initialisation when doing kdump over SR-IOV

 - Fix incorrect RTAS function name for resetting TCE tables

 - Fix fpu_signal selftest failures since a recent change

Thanks to Gaurav Batra and Nathan Lynch.

* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix fpu_signal failures
  powerpc/rtas: use correct function name for resetting TCE tables
  powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV

Pull x86 fixes from Borislav Petkov:

 - Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should
   be used by kexec only

 - Make sure MKTME feature detection happens at an earlier time in the
   boot process so that the physical address size supported by the CPU
   is properly corrected and MTRR masks are programmed properly, leading
   to TDX systems booting without disable_mtrr_cleanup on the cmdline

 - Make sure the different address sizes supported by the CPU are read
   out as early as possible

* tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/e820: Don't reserve SETUP_RNG_SEED in e820
  x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
  x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()

Merge tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "A workaround to suppress the continuous bus resets in the case that
  older devices are connected to the modern 1394 OHCI hardware and
  devices

  In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added
  to resolve the shortcomings of the long bus reset in IEEE 1394-1995.
  However, it is well-known that the solution is not necessarily
  effective in the mixing environment that both IEEE 1394-1995 PHY and
  IEEE 1394a-2000 (or later) PHY exist, as described in section 8.4.6.2
  of IEEE 1394a-2000.

  The current implementation of firewire stack schedules the short bus
  reset when attempting to resolve the mismatch of gap count in the
  certain generation of bus topology. It can cause the continuous bus
  reset in the issued environment.

  The workaround simply uses the long bus reset instead of the short bus
  reset. It is desirable to detect whether the issued environment or
  not. However, the way to access PHY registers from remote note is
  firstly defined in IEEE 1394a-2000, thus it is not available in the
  case"

* tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: use long bus reset on gap count error

Pull xfs fix from Chandan Babu:
 "Drop experimental warning message when mounting an xfs filesystem on
  an fsdax device. We now consider xfs on fsdax to be stable"

* tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: drop experimental warning for FSDAX

Pull gpio fixes from Bartosz Golaszewski:

 - fix resource freeing ordering in error path when adding a GPIO chip

 - only set pins to output after the reset is complete in gpio-74x164

* tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: fix resource unwinding order in error path
  gpiolib: Fix the error path order in gpiochip_add_data_with_key()
  gpio: 74x164: Enable output pins after registers are reset

In commit 19416123 ("block: define 'struct bvec_iter' as packed"),
what we need is to save the 4byte padding, and avoid `bio` to spread on
one extra cache line.

It is enough to define it as '__packed __aligned(4)', as '__packed'
alone means byte aligned, and can cause compiler to generate horrible
code on architectures that don't support unaligned access in case that
bvec_iter is embedded in other structures.

Cc: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 19416123 ("block: define 'struct bvec_iter' as packed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "Two small fixes, all in drivers (the more obsolete mpt3sas and the
  newer mpi3mr)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
  scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()

Pull power supply fixes from Sebastian Reichel:

 - Kconfig dependency fix

 - bq27xxx-i2c: do not free non-existing IRQ

* tag 'for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: bq27xxx-i2c: Do not free non existing IRQ
  power: supply: mm8013: select REGMAP_I2C

Pull iommufd fixes from Jason Gunthorpe:
 "Four syzkaller found bugs:

   - Corruption during error unwind in iommufd_access_change_ioas()

   - Overlapping IDs in the test suite due to out of order destruction

   - Missing locking for access->ioas in the test suite

   - False failures in the test suite validation logic with huge pages"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd/selftest: Don't check map/unmap pairing with HUGE_PAGES
  iommufd: Fix protection fault in iommufd_test_syz_conv_iova
  iommufd/selftest: Fix mock_dev_num bug
  iommufd: Fix iopt_access_list_id overwrite bug