- 01 Apr, 2020 6 commits
-
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 48a34311 upstream. DIR_INDEX has been introduced as a compat ext4 feature. That means that even kernels / tools that don't understand the feature may modify the filesystem. This works because for kernels not understanding indexed dir format, internal htree nodes appear just as empty directory entries. Index dir aware kernels then check the htree structure is still consistent before using the data. This all worked reasonably well until metadata checksums were introduced. The problem is that these effectively made DIR_INDEX only ro-compatible because internal htree nodes store checksums in a different place than normal directory blocks. Thus any modification ignorant to DIR_INDEX (or just clearing EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch and trigger kernel errors. So we have to be more careful when dealing with indexed directories on filesystems with checksumming enabled. 1) We just disallow loading any directory inodes with EXT4_INDEX_FL when DIR_INDEX is not enabled. This is harsh but it should be very rare (it means someone disabled DIR_INDEX on existing filesystem and didn't run e2fsck), e2fsck can fix the problem, and we don't want to answer the difficult question: "Should we rather corrupt the directory more or should we ignore that DIR_INDEX feature is not set?" 2) When we find out htree structure is corrupted (but the filesystem and the directory should in support htrees), we continue just ignoring htree information for reading but we refuse to add new entries to the directory to avoid corrupting it more. Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz Fixes: dbe89444 ("ext4: Calculate and verify checksums for htree nodes") Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Zhihao Cheng authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit f5de5b83 upstream. In ubifs, concurrent execution of writepage and bulk read on the same file may cause ABBA deadlock, for example (Reproduce method see Link): Process A(Bulk-read starts from page4) Process B(write page4 back) vfs_read wb_workfn or fsync ... ... generic_file_buffered_read write_cache_pages ubifs_readpage LOCK(page4) ubifs_bulk_read ubifs_writepage LOCK(ui->ui_mutex) ubifs_write_inode ubifs_do_bulk_read LOCK(ui->ui_mutex) find_or_create_page(alloc page4) ↑ LOCK(page4) <-- ABBA deadlock occurs! In order to ensure the serialization execution of bulk read, we can't remove the big lock 'ui->ui_mutex' in ubifs_bulk_read(). Instead, we allow ubifs_do_bulk_read() to lock page failed by replacing find_or_create_page(FGP_LOCK) with pagecache_get_page(FGP_LOCK | FGP_NOWAIT). Signed-off-by:
Zhihao Cheng <chengzhihao1@huawei.com> Suggested-by:
zhangyi (F) <yi.zhang@huawei.com> Cc: <Stable@vger.kernel.org> Fixes: 4793e7c5 ("UBIFS: add bulk-read facility") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206153Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Arvind Sankar authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 93f9d1a4 upstream. The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate, but it returns the rate in byte-reversed order. When setting sampling rate, the driver produces these warning messages: [168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100 [168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000 [168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000 As can be seen from the hexadecimal conversion, the current rate read back is byte-reversed from the rate that was set. 44100 == 0x00ac44, 4500480 == 0x44ac00 48000 == 0x00bb80, 8436480 == 0x80bb00 96000 == 0x017700, 30465 == 0x007701 Rather than implementing a new quirk to reverse the order, just skip checking the rate to avoid spamming the log. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.eduSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit b4a81b87 upstream. In ecryptfs_init_messaging(), if the allocation for 'ecryptfs_msg_ctx_arr' fails, the previously allocated 'ecryptfs_daemon_hash' is not deallocated, leading to a memory leak bug. To fix this issue, free 'ecryptfs_daemon_hash' before returning the error. Cc: stable@vger.kernel.org Fixes: 88b4a07e ("[PATCH] eCryptfs: Public key transport mechanism") Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit fe2e082f upstream. In parse_tag_1_packet(), if tag 1 packet contains a key larger than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES, no cleanup is executed, leading to a memory leak on the allocated 'auth_tok_list_item'. To fix this issue, go to the label 'out_free' to perform the cleanup work. Cc: stable@vger.kernel.org Fixes: dddfa461 ("[PATCH] eCryptfs: Public key; packet management") Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 44eeb081 upstream. Some code in HD-audio driver calls snprintf() in a loop and still expects that the return value were actually written size, while snprintf() returns the expected would-be length instead. When the given buffer limit were small, this leads to a buffer overflow. Use scnprintf() for addressing those issues. It returns the actually written size unlike snprintf(). Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200218091409.27162-1-tiwai@suse.deSigned-off-by:
-
- 15 Mar, 2020 34 commits
-
-
Khalid Elmously authored
Signed-off-by: -
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1867243 Properties: no-test-build Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by: -
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
Khalid Elmously authored
Commit "1505f7d8596c5349 of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc" introduced a new config change. updateconfigs accordingly Ignore: yes Signed-off-by: -
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1864775Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Mike Snitzer authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 47ace7e0 upstream. Move blk_queue_make_request() to dm.c:alloc_dev() so that q->make_request_fn is never NULL during the lifetime of a DM device (even one that is created without a DM table). Otherwise generic_make_request() will crash simply by doing: dmsetup create -n test mount /dev/dm-N /mnt While at it, move ->congested_data initialization out of dm.c:alloc_dev() and into the bio-based specific init method. Reported-by:
Stefan Bader <stefan.bader@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1860231 Fixes: ff36ab34 ("dm: remove request-based logic from make_request_fn wrapper") Depends-on: c12c9a3c ("dm: various cleanups to md->queue initialization code") Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [smb: adjusted for context and dm_init_md_queue() exitsting in older kernels, and congested_data embedded in backing_dev_info, and dm_init_normal_md_queue() was called dm_init_old_md_queue()] Signed-off-by:
-
Nicolai Stange authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 1754c4f6 ] Commit e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") introduced a bounds check on the number of supplied rates to lbs_ibss_join_existing() and made it to return on overflow. However, the aforementioned commit doesn't set the return value accordingly and thus, lbs_ibss_join_existing() would return with zero even though it failed. Make lbs_ibss_join_existing return -EINVAL in case the bounds check on the number of supplied rates fails. Fixes: e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Nicolai Stange authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit c7bf1fb7 ] Commit e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") introduced a bounds check on the number of supplied rates to lbs_ibss_join_existing(). Unfortunately, it introduced a return path from within a RCU read side critical section without a corresponding rcu_read_unlock(). Fix this. Fixes: e5e884b4 ("libertas: Fix two buffer overflows at parsing bss descriptor") Signed-off-by:
-
Qing Xu authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit b70261a2 ] mwifiex_cmd_append_vsie_tlv() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by:
Qing Xu <m1s5p6688@gmail.com> Signed-off-by:
-
Qing Xu authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 3a9b153c ] mwifiex_ret_wmm_get_status() calls memcpy() without checking the destination size.Since the source is given from remote AP which contains illegal wmm elements , this may trigger a heap buffer overflow. Fix it by putting the length check before calling memcpy(). Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 805f6357 upstream. The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.beSigned-off-by:
-
Alexey Kardashevskiy authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 7559d3d2 upstream. By default a pseries guest supports a H_PUT_TCE hypercall which maps a single IOMMU page in a DMA window. Additionally the hypervisor may support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once; this is advertised via the device tree /rtas/ibm,hypertas-functions property which Linux converts to FW_FEATURE_MULTITCE. FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however the code managing the huge DMA window (DDW) ignores it and calls H_PUT_TCE_INDIRECT even if it is explicitly disabled via the "multitce=off" kernel command line parameter. This adds FW_FEATURE_MULTITCE checking to the DDW code path. This changes tce_build_pSeriesLP to take liobn and page size as the huge window does not have iommu_table descriptor which usually the place to store these numbers. Fixes: 4e8b0cf4 ("powerpc/pseries: Add support for dynamic dma windows") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216041924.42318-3-aik@ozlabs.ruSigned-off-by:
-
Alexandre Belloni authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit a7e0f3fc upstream. The clock rate range for the TCB1 clock is missing. define it in the device tree. Reported-by:
Karl Rudbæk Olsen <karl@micro-technic.com> Fixes: d2e8190b ("ARM: at91/dt: define sama5d3 clocks") Link: https://lore.kernel.org/r/20200110172007.1253659-2-alexandre.belloni@bootlin.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit ee0aa926 upstream. Currently the maximum rate for peripheral clock is calculated based on a typical 133MHz MCK. The maximum frequency is defined in the datasheet as a ratio to MCK. Some sama5d3 platforms are using a 166MHz MCK. Update the device trees to match the maximum rate based on 166MHz. Reported-by:
-
Jose Abreu authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 7980dff3 upstream. Add a missing property to GMAC node so that multicast filtering works correctly. Fixes: 556cc1c5 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)") Acked-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Paul Kocialkowski authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit f236a2a2 upstream. The current code returns -EPERM when the voltage loss bit is set. Since the bit indicates that the time value is not valid, return -EINVAL instead, which is the appropriate error code for this situation. Fixes: dcaf0384 ("rtc: add hym8563 rtc-driver") Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://lore.kernel.org/r/20191212153111.966923-1-paul.kocialkowski@bootlin.comSigned-off-by:
-
Bean Huo authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit b9fc5320 upstream. A non-zero error value likely being returned by ufshcd_scsi_add_wlus() in case of failure of adding the WLs, but ufshcd_probe_hba() doesn't use this value, and doesn't report this failure to upper caller. This patch is to fix this issue. Fixes: 2a8fa600 ("ufs: manually add well known logical units") Link: https://lore.kernel.org/r/20200120130820.1737-2-huobean@gmail.comReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ranjani Sridharan authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit acbf2774 ] Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command. In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active. The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191104224812.3393-2-ranjani.sridharan@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Song Liu authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit 00346155 upstream. Decreasing sysctl_perf_event_mlock between two consecutive perf_mmap()s of a perf ring buffer may lead to an integer underflow in locked memory accounting. This may lead to the undesired behaviors, such as failures in BPF map creation. Address this by adjusting the accounting logic to take into account the possibility that the amount of already locked memory may exceed the current limit. Fixes: c4b75479 ("perf/core: Make the mlock accounting simple again") Suggested-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Acked-by:
-
Konstantin Khlebnikov authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit febac332 upstream. Kernel crashes inside QEMU/KVM are observed: kernel BUG at kernel/time/timer.c:1154! BUG_ON(timer_pending(timer) || !timer->function) in add_timer_on(). At the same time another cpu got: general protection fault: 0000 [#1] SMP PTI of poinson pointer 0xdead000000000200 in: __hlist_del at include/linux/list.h:681 (inlined by) detach_timer at kernel/time/timer.c:818 (inlined by) expire_timers at kernel/time/timer.c:1355 (inlined by) __run_timers at kernel/time/timer.c:1686 (inlined by) run_timer_softirq at kernel/time/timer.c:1699 Unfortunately kernel logs are badly scrambled, stacktraces are lost. Printing the timer->function before the BUG_ON() pointed to clocksource_watchdog(). The execution of clocksource_watchdog() can race with a sequence of clocksource_stop_watchdog() .. clocksource_start_watchdog(): expire_timers() detach_timer(timer, true); timer->entry.pprev = NULL; raw_spin_unlock_irq(&base->lock); call_timer_fn clocksource_watchdog() clocksource_watchdog_kthread() or clocksource_unbind() spin_lock_irqsave(&watchdog_lock, flags); clocksource_stop_watchdog(); del_timer(&watchdog_timer); watchdog_running = 0; spin_unlock_irqrestore(&watchdog_lock, flags); spin_lock_irqsave(&watchdog_lock, flags); clocksource_start_watchdog(); add_timer_on(&watchdog_timer, ...); watchdog_running = 1; spin_unlock_irqrestore(&watchdog_lock, flags); spin_lock(&watchdog_lock); add_timer_on(&watchdog_timer, ...); BUG_ON(timer_pending(timer) || !timer->function); timer_pending() -> true BUG() I.e. inside clocksource_watchdog() watchdog_timer could be already armed. Check timer_pending() before calling add_timer_on(). This is sufficient as all operations are synchronized by watchdog_lock. Fixes: 75c5158f ("timekeeping: Update clocksource with stop_machine") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/158048693917.4378.13823603769948933793.stgit@buzzSigned-off-by:
-
Ronnie Sahlberg authored
BugLink: https://bugs.launchpad.net/bugs/1864775 commit b0dd940e upstream. RHBZ: 1579050 If we have a soft mount we should fail commands for session-setup failures (such as the password having changed/ account being deleted/ ...) and return an error back to the application. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Miaohe Lin authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit a4d956b9 ] In case writing to vmread destination operand result in a #PF, vmread should not call nested_vmx_succeed() to set rflags to specify success. Similar to as done in VMPTRST (See handle_vmptrst()). Reviewed-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Cc: stable@vger.kernel.org Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit fe6ed369 ] Reject writes to RTIT address MSRs if the data being written is a non-canonical address as the MSRs are subject to canonical checks, e.g. KVM will trigger an unchecked #GP when loading the values to hardware during pt_guest_enter(). Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit e30a7d62 ] Remove the bogus 64-bit only condition from the check that disables MMIO spte optimization when the system supports the max PA, i.e. doesn't have any reserved PA bits. 32-bit KVM always uses PAE paging for the shadow MMU, and per Intel's SDM: PAE paging translates 32-bit linear addresses to 52-bit physical addresses. The kernel's restrictions on max physical addresses are limits on how much memory the kernel can reasonably use, not what physical addresses are supported by hardware. Fixes: ce88decf ("KVM: MMU: mmio page fault support") Cc: stable@vger.kernel.org Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 42ffb0bf ] There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02e ("Btrfs: Add writepages support") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Marios Pomonis authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 4bf79cb0 ] This fixes a Spectre-v1/L1TF vulnerability in kvm_lapic_reg_write(). This function contains index computations based on the (attacker-controlled) MSR number. Fixes: 0105d1a5 ("KVM: x2apic interface to lapic") Signed-off-by:
Nick Finco <nifi@google.com> Signed-off-by:
Marios Pomonis <pomonis@google.com> Reviewed-by:
Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Marios Pomonis authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 66061740 ] This fixes Spectre-v1/L1TF vulnerabilities in intel_find_fixed_event() and intel_rdpmc_ecx_to_pmc(). kvm_rdpmc() (ancestor of intel_find_fixed_event()) and reprogram_fixed_counter() (ancestor of intel_rdpmc_ecx_to_pmc()) are exported symbols so KVM should treat them conservatively from a security perspective. Fixes: 25462f7f ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch") Signed-off-by:
-
Marios Pomonis authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 14e32321 ] This fixes a Spectre-v1/L1TF vulnerability in picdev_write(). It replaces index computations based on the (attacked-controlled) port number with constants through a minor refactoring. Fixes: 85f455f7 ("KVM: Add support for in-kernel PIC emulation") Signed-off-by:
-
David Hildenbrand authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 9fecaa9e ] We already have the exact same checks a couple of lines below. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Claudiu Beznea authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 2c1fb9d8 ] Changing pixel clock source without having this clock source enabled will block the timing engine and the next operations after (in this case setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb() will fail). It is recomended (although in datasheet this is not present) to actually enabled pixel clock source before doing any changes on timing enginge (only SAM9X60 datasheet specifies that the peripheral clock and pixel clock must be enabled before using LCD controller). Fixes: 1a396789 ("drm: add Atmel HLCDC Display Controller support") Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: <stable@vger.kernel.org> # v4.0+ Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-3-git-send-email-claudiu.beznea@microchip.comSigned-off-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit 7227ff4d ] There is a race between adding and removing elements to the tree mod log list and rbtree that can lead to use-after-free problems. Consider the following example that explains how/why the problems happens: 1) Task A has mod log element with sequence number 200. It currently is the only element in the mod log list; 2) Task A calls btrfs_put_tree_mod_seq() because it no longer needs to access the tree mod log. When it enters the function, it initializes 'min_seq' to (u64)-1. Then it acquires the lock 'tree_mod_seq_lock' before checking if there are other elements in the mod seq list. Since the list it empty, 'min_seq' remains set to (u64)-1. Then it unlocks the lock 'tree_mod_seq_lock'; 3) Before task A acquires the lock 'tree_mod_log_lock', task B adds itself to the mod seq list through btrfs_get_tree_mod_seq() and gets a sequence number of 201; 4) Some other task, name it task C, modifies a btree and because there elements in the mod seq list, it adds a tree mod elem to the tree mod log rbtree. That node added to the mod log rbtree is assigned a sequence number of 202; 5) Task B, which is doing fiemap and resolving indirect back references, calls btrfs get_old_root(), with 'time_seq' == 201, which in turn calls tree_mod_log_search() - the search returns the mod log node from the rbtree with sequence number 202, created by task C; 6) Task A now acquires the lock 'tree_mod_log_lock', starts iterating the mod log rbtree and finds the node with sequence number 202. Since 202 is less than the previously computed 'min_seq', (u64)-1, it removes the node and frees it; 7) Task B still has a pointer to the node with sequence number 202, and it dereferences the pointer itself and through the call to __tree_mod_log_rewind(), resulting in a use-after-free problem. This issue can be triggered sporadically with the test case generic/561 from fstests, and it happens more frequently with a higher number of duperemove processes. When it happens to me, it either freezes the VM or it produces a trace like the following before crashing: [ 1245.321140] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 1245.321200] CPU: 1 PID: 26997 Comm: pool Not tainted 5.5.0-rc6-btrfs-next-52 #1 [ 1245.321235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 1245.321287] RIP: 0010:rb_next+0x16/0x50 [ 1245.321307] Code: .... [ 1245.321372] RSP: 0018:ffffa151c4d039b0 EFLAGS: 00010202 [ 1245.321388] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8ae221363c80 RCX: 6b6b6b6b6b6b6b6b [ 1245.321409] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ae221363c80 [ 1245.321439] RBP: ffff8ae20fcc4688 R08: 0000000000000002 R09: 0000000000000000 [ 1245.321475] R10: ffff8ae20b120910 R11: 00000000243f8bb1 R12: 0000000000000038 [ 1245.321506] R13: ffff8ae221363c80 R14: 000000000000075f R15: ffff8ae223f762b8 [ 1245.321539] FS: 00007fdee1ec7700(0000) GS:ffff8ae236c80000(0000) knlGS:0000000000000000 [ 1245.321591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1245.321614] CR2: 00007fded4030c48 CR3: 000000021da16003 CR4: 00000000003606e0 [ 1245.321642] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1245.321668] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1245.321706] Call Trace: [ 1245.321798] __tree_mod_log_rewind+0xbf/0x280 [btrfs] [ 1245.321841] btrfs_search_old_slot+0x105/0xd00 [btrfs] [ 1245.321877] resolve_indirect_refs+0x1eb/0xc60 [btrfs] [ 1245.321912] find_parent_nodes+0x3dc/0x11b0 [btrfs] [ 1245.321947] btrfs_check_shared+0x115/0x1c0 [btrfs] [ 1245.321980] ? extent_fiemap+0x59d/0x6d0 [btrfs] [ 1245.322029] extent_fiemap+0x59d/0x6d0 [btrfs] [ 1245.322066] do_vfs_ioctl+0x45a/0x750 [ 1245.322081] ksys_ioctl+0x70/0x80 [ 1245.322092] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1245.322113] __x64_sys_ioctl+0x16/0x20 [ 1245.322126] do_syscall_64+0x5c/0x280 [ 1245.322139] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1245.322155] RIP: 0033:0x7fdee3942dd7 [ 1245.322177] Code: .... [ 1245.322258] RSP: 002b:00007fdee1ec6c88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 1245.322294] RAX: ffffffffffffffda RBX: 00007fded40210d8 RCX: 00007fdee3942dd7 [ 1245.322314] RDX: 00007fded40210d8 RSI: 00000000c020660b RDI: 0000000000000004 [ 1245.322337] RBP: 0000562aa89e7510 R08: 0000000000000000 R09: 00007fdee1ec6d44 [ 1245.322369] R10: 0000000000000073 R11: 0000000000000246 R12: 00007fdee1ec6d48 [ 1245.322390] R13: 00007fdee1ec6d40 R14: 00007fded40210d0 R15: 00007fdee1ec6d50 [ 1245.322423] Modules linked in: .... [ 1245.323443] ---[ end trace 01de1e9ec5dff3cd ]--- Fix this by ensuring that btrfs_put_tree_mod_seq() computes the minimum sequence number and iterates the rbtree while holding the lock 'tree_mod_log_lock' in write mode. Also get rid of the 'tree_mod_seq_lock' lock, since it is now redundant. Fixes: bd989ba3 ("Btrfs: add tree modification log functions") Fixes: 097b8a7c ("Btrfs: join tree mod log code with the code holding back delayed refs") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
David Sterba authored
BugLink: https://bugs.launchpad.net/bugs/1864775 [ Upstream commit b1a09f1e ] The wrappers are trivial and do not bring any extra value on top of the plain locking primitives. Reviewed-by:
-
