for_each_shell_test() is already strict in expecting tests to be files
and executable. It is sometimes possible when it iterates over all files
that it finds one that is executable and lacks a newline character. When
this happens the loop never terminates as it doesn't check for EOF.

Add the EOF check to make this loop at least bounded by the file size.

If the description is returned as NULL then also skip the test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220517204144.645913-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The X86 specific arch__intr_reg_mask() is to check whether the kernel
and hardware can collect XMM registers. But it doesn't work on some
hybrid platform.

Without the patch on ADL-N:

  $ perf record -I?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
  R11 R12 R13 R14 R15

The config of the test event doesn't contain the PMU information. The
kernel may fail to initialize it on the correct hybrid PMU and return
the wrong non-supported information.

Add the PMU information into the config for the hybrid platform. The
same register set is supported among different hybrid PMUs. Checking
the first available one is good enough.

With the patch on ADL-N:

  $ perf record -I?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
  R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
  XMM10 XMM11 XMM12 XMM13 XMM14 XMM15

Fixes: 6466ec14 ("perf regs x86: Add X86 specific arch__intr_reg_mask()")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518145125.1494156-1-kan.liang@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

"perf all PMU test" picks the input events from "perf list --raw-dump
pmu" list and runs "perf stat -e" for each of the event in the list. In
case of powerpc, the PowerVM environment supports events from hv_24x7
and hv_gpci PMU which is of example format like below:

- hv_24x7/CPM_ADJUNCT_INST,domain=?,core=?/
- hv_gpci/event,partition_id=?/

The value for "?" needs to be filled in depending on system and
respective event. CPM_ADJUNCT_INST needs have core value and domain
value. hv_gpci event needs partition_id.  Similarly, there are other
events for hv_24x7 and hv_gpci having "?" in event format. Hence skip
these events on powerpc platform since values like partition_id, domain
is specific to system and event.

Fixes: 3d5ac9ef ("perf test: Workload test of all PMUs")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520101236.17249-1-atrajeev@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Stat events can come from disk and so need a degree of validation. They
contain a CPU which needs looking up via CPU map to access a counter.

Add the CPU to index translation, alongside validity checking.

Discussion thread:

  https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/

Fixes: 7ac0089d ("perf evsel: Pass cpu not cpu map index to synthesize")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Suggested-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lv Ruyi <lv.ruyi@zte.com.cn>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220519032005.1273691-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.

Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.

Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:

  $ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
  test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
  test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
      6 |         return btf__load_from_kernel_by_id(20151128, NULL);
        |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  $

  $ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
  00000000005ba180 T btf__load_from_kernel_by_id
  $

  $ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf

  /tmp/build/perf-urgent/perf:     file format elf64-x86-64
  <SNIP>
  00000000005ba180 <btf__load_from_kernel_by_id>:
  #include "record.h"
  #include "util/synthetic-events.h"

  #ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
  struct btf *btf__load_from_kernel_by_id(__u32 id)
  {
    5ba180:	55                   	push   %rbp
    5ba181:	48 89 e5             	mov    %rsp,%rbp
    5ba184:	48 83 ec 10          	sub    $0x10,%rsp
    5ba188:	64 48 8b 04 25 28 00 	mov    %fs:0x28,%rax
    5ba18f:	00 00
    5ba191:	48 89 45 f8          	mov    %rax,-0x8(%rbp)
    5ba195:	31 c0                	xor    %eax,%eax
         struct btf *btf;
  #pragma GCC diagnostic push
  #pragma GCC diagnostic ignored "-Wdeprecated-declarations"
         int err = btf__get_from_id(id, &btf);
    5ba197:	48 8d 75 f0          	lea    -0x10(%rbp),%rsi
    5ba19b:	e8 a0 57 e5 ff       	call   40f940 <btf__get_from_id@plt>
    5ba1a0:	89 c2                	mov    %eax,%edx
  #pragma GCC diagnostic pop

         return err ? ERR_PTR(err) : btf;
    5ba1a2:	48 98                	cltq
    5ba1a4:	85 d2                	test   %edx,%edx
    5ba1a6:	48 0f 44 45 f0       	cmove  -0x10(%rbp),%rax
  }
  <SNIP>

Fixes: 218e7b77 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull crypto fix from Herbert Xu:
 "Fix a regression in a recent fix to qcom-rng"

* tag 'v5.18-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ

Pull parisc architecture fixes from Helge Deller:
 "We had two big outstanding issues after v5.18-rc6:

   a) 32-bit kernels on 64-bit machines (e.g. on a C3700 which is able
      to run 32- and 64-bit kernels) failed early in userspace.

   b) 64-bit kernels on PA8800/PA8900 CPUs (e.g. in a C8000) showed
      random userspace segfaults. We assumed that those problems were
      caused by the tmpalias flushes.

  Dave did a lot of testing and reorganization of the current flush code
  and fixed the 32-bit cache flushing. For PA8800/PA8900 CPUs he
  switched the code to flush using the virtual address of user and
  kernel pages instead of using tmpalias flushes. The tmpalias flushes
  don't seem to work reliable on such CPUs.

  We tested the patches on a wide range machines (715/64, B160L, C3000,
  C3700, C8000, rp3440) and they have been in for-next without any
  conflicts.

  Summary:

   - Rewrite the cache flush code for PA8800/PA8900 CPUs to flush using
     the virtual address of user and kernel pages instead of using
     tmpalias flushes. Testing showed, that tmpalias flushes don't work
     reliably on PA8800/PA8900 CPUs

   - Fix flush code to allow 32-bit kernels to run on 64-bit capable
     machines, e.g. a 32-bit kernel on C3700 machines"

* tag 'for-5.18/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix patch code locking and flushing
  parisc: Rewrite cache flush code for PA8800/PA8900
  parisc: Disable debug code regarding cache flushes in handle_nadtlb_fault()

Pull ARM fixes from Russell King:
 "Two further fixes for Spectre-BHB from Ard for Cortex A15 and to use
  the wide branch instruction for Thumb2"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2
  ARM: 9196/1: spectre-bhb: enable for Cortex-A15

Pull pin control fixes from Linus Walleij:

 - Fix an altmode in the Ocelot driver

 - Fix the IES control pins in the Mediatek MT8365 driver

 - Sunxi (AMLogic) driver:
    - Fix the UART2 function pin assignments
    - Fix the signal name of the PA2 SPI pin

* tag 'pinctrl-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin
  pinctrl: sunxi: fix f1c100s uart2 function
  pinctrl: mediatek: mt8365: fix IES control pins
  pinctrl: ocelot: Fix for lan966x alt mode

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, xfrm and netfilter subtrees.

  Notably this reverts a recent TCP/DCCP netns-related change to address
  a possible UaF.

  Current release - regressions:

   - tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"

   - xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
     ifdown

  Previous releases - regressions:

   - netfilter: flowtable: fix TCP flow teardown

   - can: revert "can: m_can: pci: use custom bit timings for Elkhart
     Lake"

   - xfrm: check encryption module availability consistency

   - eth: vmxnet3: fix possible use-after-free bugs in
     vmxnet3_rq_alloc_rx_buf()

   - eth: mlx5: initialize flow steering during driver probe

   - eth: ice: fix crash when writing timestamp on RX rings

  Previous releases - always broken:

   - mptcp: fix checksum byte order

   - eth: lan966x: fix assignment of the MAC address

   - eth: mlx5: remove HW-GRO from reported features

   - eth: ftgmac100: disable hardware checksum on AST2600"

* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
  ptp: ocp: change sysfs attr group handling
  selftests: forwarding: fix missing backslash
  netfilter: nf_tables: disable expression reduction infra
  netfilter: flowtable: move dst_check to packet path
  netfilter: flowtable: fix TCP flow teardown
  net: ftgmac100: Disable hardware checksum on AST2600
  igb: skip phy status check where unavailable
  nfc: pn533: Fix buggy cleanup order
  mptcp: Do TCP fallback on early DSS checksum failure
  mptcp: fix checksum byte order
  net: af_key: check encryption module availability consistency
  net: af_key: add check for pfkey_broadcast in function pfkey_process
  net/mlx5: Drain fw_reset when removing device
  net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
  net/mlx5e: CT: Fix support for GRE tuples
  net/mlx5e: Remove HW-GRO from reported features
  net/mlx5e: Properly block HW GRO when XDP is enabled
  net/mlx5e: Properly block LRO when XDP is enabled
  net/mlx5e: Block rx-gro-hw feature in switchdev mode
  ...

It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:

       br1
     /    \
    /      \
   /        \
 br0.11    wlan0
   |
   br0
 /  |  \
p1  p2  p3

br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.

A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.

When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().

Fixes: f1c2eddf ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.chSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In the detach path, the driver calls sysfs_remove_group() for the
groups it believes has been registered.  However, if the group was
never previously registered, then this causes a splat.

Instead, compute the groups that should be registered in advance,
and then call sysfs_create_groups(), which registers them all at once.

Update the error handling appropriately.

Fixes: c205d53c ("ptp: ocp: Add firmware capability bits for feature gating")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix missing backslash, introduced in f62c5acc.  Causes all tests to
not be installed.

Fixes: f62c5acc ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Reduce number of hardware offload retries from flowtable datapath
   which might hog system with retries, from Felix Fietkau.

2) Skip neighbour lookup for PPPoE device, fill_forward_path() already
   provides this and set on destination address from fill_forward_path for
   PPPoE device, also from Felix.

4) When combining PPPoE on top of a VLAN device, set info->outdev to the
   PPPoE device so software offload works, from Felix.

5) Fix TCP teardown flowtable state, races with conntrack gc might result
   in resetting the state to ESTABLISHED and the time to one day. Joint
   work with Oz Shlomo and Sven Auhagen.

6) Call dst_check() from flowtable datapath to check if dst is stale
   instead of doing it from garbage collector path.

7) Disable register tracking infrastructure, either user-space or
   kernel need to pre-fetch keys inconditionally, otherwise register
   tracking assumes data is already available in register that might
   not well be there, leading to incorrect reductions.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: disable expression reduction infra
  netfilter: flowtable: move dst_check to packet path
  netfilter: flowtable: fix TCP flow teardown
  netfilter: nft_flow_offload: fix offload with pppoe + vlan
  net: fix dev_fill_forward_path with pppoe + bridge
  netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices
  netfilter: flowtable: fix excessive hw offload attempts after failure
====================

Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull block fix from Jens Axboe:
 "Just a small fix for a missing fifo time assigment for the head
  insertion case in mq-deadline"

* tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
  block/mq-deadline: Set the fifo_time member also if inserting at head

Pull io_uring fixes from Jens Axboe:
 "Two small changes fixing issues from the 5.18 merge window:

   - Fix wrong ordering of a tracepoint (Dylan)

   - Fix MSG_RING on IOPOLL rings (me)"

* tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
  io_uring: don't attempt to IOPOLL for MSG_RING requests
  io_uring: fix ordering of args in io_uring_queue_async_work

Pull audit fix from Paul Moore:
 "A single audit patch to fix a problem where a task's audit_context was
  not being properly reset with io_uring"

* tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit,io_uring,io-wq: call __audit_uring_exit for dummy contexts

Pull selinux fix from Paul Moore:
 "A single SELinux patch to fix an error path that was doing the wrong
  thing with respect to freeing memory"

* tag 'selinux-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix bad cleanup on error in hashtab_duplicate()

Pull ARM SoC fixes from Arnd Bergmann:
 "The SoC bug fixes have calmed down sufficiently, there is one minor
  update for the MAINTAINERS file, and few bug fixes for dts
  descriptions:

   - Updates to the BananaPi R2-Pro (rk3568) dts to match production
     hardware rather than the prototype version.

   - Qualcomm sm8250 soundwire gets disabled on some machines to avoid
     crashes

   - A number of aspeed SoC specific fixes, addressing incorrect pin
     cotrol settings, some values in the romed8hm board, and a revert
     for an accidental removal of a DT node"

* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: omap: remove me as a maintainer
  ARM: dts: aspeed: Add video engine to g6
  ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
  ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
  ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
  ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
  dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
  pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
  dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
  pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
  ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
  arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
  arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
  arm64: dts: rockchip: Change io-domains of bpi-r2-pro

Pull misc fixes from Al Viro:
 "vhost race fix and a percpu_ref_init-caused cgroup double-free fix.

  The latter had manifested as buggered struct mount refcounting - those
  are also using percpu data structures, but anything that does percpu
  allocations could be hit"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Fix double fget() in vhost_net_set_backend()
  percpu_ref_init(): clean ->percpu_count_ref on failure

Pull mlx5 fix from Michael Tsirkin:
 "One last minute fixup

  The patch has been on list for a while but as it was posted as part of
  a thread it was missed"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Use consistent RQT size

Descriptor table is a shared resource; two fget() on the same descriptor
may return different struct file references.  get_tap_ptr_ring() is
called after we'd found (and pinned) the socket we'll be using and it
tries to find the private tun/tap data structures associated with it.
Redoing the lookup by the same file descriptor we'd used to get the
socket is racy - we need to same struct file.

Thanks to Jason for spotting a braino in the original variant of patch -
I'd missed the use of fd == -1 for disabling backend, and in that case
we can end up with sock == NULL and sock != oldsock.

Cc: stable@kernel.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The current code evaluates RQT size based on the configured number of
virtqueues. This can raise an issue in the following scenario:

Assume MQ was negotiated.
1. mlx5_vdpa_set_map() gets called.
2. handle_ctrl_mq() is called setting cur_num_vqs to some value, lower
   than the configured max VQs.
3. A second set_map gets called, but now a smaller number of VQs is used
   to evaluate the size of the RQT.
4. handle_ctrl_mq() is called with a value larger than what the RQT can
   hold. This will emit errors and the driver state is compromised.

To fix this, we use a new field in struct mlx5_vdpa_net to hold the
required number of entries in the RQT. This value is evaluated in
mlx5_vdpa_set_driver_features() where we have the negotiated features
all set up.

In addition to that, we take into consideration the max capability of RQT
entries early when the device is added so we don't need to take consider
it when creating the RQT.

Last, we remove the use of mlx5_vdpa_max_qps() which just returns the
max_vas / 2 and make the code clearer.

Fixes: 52893733 ("vdpa/mlx5: Add multiqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull sound fixes from Takashi Iwai:
 "A collection of last-minute HD- an USB-audio quirks in addition to a
  fix for the legacy ISA wavefront driver.

  All look small and easy"

* tag 'sound-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Restore Rane SL-1 quirk
  ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
  ALSA: hda/realtek: Add quirk for TongFang devices with pop noise
  ALSA: hda/realtek: Add quirk for the Framework Laptop
  ALSA: wavefront: Proper check of get_user() error
  ALSA: hda/realtek: Add quirk for Dell Latitude 7520
  ALSA: hda - fix unused Realtek function when PM is not enabled
  ALSA: usb-audio: Don't get sample rate for MCT Trigger 5 USB-to-HDMI

Either userspace or kernelspace need to pre-fetch keys inconditionally
before comparisons for this to work. Otherwise, register tracking data
is misleading and it might result in reducing expressions which are not
yet registers.

First expression is also guaranteed to be evaluated always, however,
certain expressions break before writing data to registers, before
comparing the data, leaving the register in undetermined state.

This patch disables this infrastructure by now.

Fixes: b2d30654 ("netfilter: nf_tables: do not reduce read-only expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Fixes sporadic IPv6 packet loss when flow offloading is enabled.

IPv6 route GC and flowtable GC are not synchronized.
When dst_cache becomes stale and a packet passes through the flow before
the flowtable GC teardowns it, the packet can be dropped.
So, it is necessary to check dst every time in packet path.

Fixes: 227e1e4d ("netfilter: nf_flowtable: skip device lookup from interface index")
Signed-off-by: Ritaro Takenaka <ritarot634@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch addresses three possible problems:

1. ct gc may race to undo the timeout adjustment of the packet path, leaving
   the conntrack entry in place with the internal offload timeout (one day).

2. ct gc removes the ct because the IPS_OFFLOAD_BIT is not set and the CLOSE
   timeout is reached before the flow offload del.

3. tcp ct is always set to ESTABLISHED with a very long timeout
   in flow offload teardown/delete even though the state might be already
   CLOSED. Also as a remark we cannot assume that the FIN or RST packet
   is hitting flow table teardown as the packet might get bumped to the
   slow path in nftables.

This patch resets IPS_OFFLOAD_BIT from flow_offload_teardown(), so
conntrack handles the tcp rst/fin packet which triggers the CLOSE/FIN
state transition.

Moreover, teturn the connection's ownership to conntrack upon teardown
by clearing the offload flag and fixing the established timeout value.
The flow table GC thread will asynchonrnously free the flow table and
hardware offload entries.

Before this patch, the IPS_OFFLOAD_BIT remained set for expired flows on
which is also misleading since the flow is back to classic conntrack
path.

If nf_ct_delete() removes the entry from the conntrack table, then it
calls nf_ct_put() which decrements the refcnt. This is not a problem
because the flowtable holds a reference to the conntrack object from
flow_offload_alloc() path which is released via flow_offload_free().

This patch also updates nft_flow_offload to skip packets in SYN_RECV
state. Since we might miss or bump packets to slow path, we do not know
what will happen there while we are still in SYN_RECV, this patch
postpones offload up to the next packet which also aligns to the
existing behaviour in tc-ct.

flow_offload_teardown() does not reset the existing tcp state from
flow_offload_fixup_tcp() to ESTABLISHED anymore, packets bump to slow
path might have already update the state to CLOSE/FIN.

Joint work with Oz and Sven.

Fixes: 1e5b2471 ("netfilter: nf_flow_table: teardown flow timeout race")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The AST2600 when using the i210 NIC over NC-SI has been observed to
produce incorrect checksum results with specific MTU values. This was
first observed when sending data across a long distance set of networks.

On a local network, the following test was performed using a 1MB file of
random data.

On the receiver run this script:

 #!/bin/bash
 while [ 1 ]; do
        # Zero the stats
        nstat -r  > /dev/null
        nc -l 9899 > test-file
        # Check for checksum errors
        TcpInCsumErrors=$(nstat | grep TcpInCsumErrors)
        if [ -z "$TcpInCsumErrors" ]; then
                echo No TcpInCsumErrors
        else
                echo TcpInCsumErrors = $TcpInCsumErrors
        fi
 done

On an AST2600 system:

 # nc <IP of  receiver host> 9899 < test-file

The test was repeated with various MTU values:

 # ip link set mtu 1410 dev eth0

The observed results:

 1500 - good
 1434 - bad
 1400 - good
 1410 - bad
 1420 - good

The test was repeated after disabling tx checksumming:

 # ethtool -K eth0 tx-checksumming off

And all MTU values tested resulted in transfers without error.

An issue with the driver cannot be ruled out, however there has been no
bug discovered so far.

David has done the work to take the original bug report of slow data
transfer between long distance connections and triaged it down to this
test case.

The vendor suspects this this is a hardware issue when using NC-SI. The
fixes line refers to the patch that introduced AST2600 support.
Reported-by: David Wilder <wilder@us.ibm.com>
Reviewed-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

igb_read_phy_reg() will silently return, leaving phy_data untouched, if
hw->ops.read_reg isn't set. Depending on the uninitialized value of
phy_data, this led to the phy status check either succeeding immediately
or looping continuously for 2 seconds before emitting a noisy err-level
timeout. This message went out to the console even though there was no
actual problem.

Instead, first check if there is read_reg function pointer. If not,
proceed without trying to check the phy status register.

Fixes: b72f3f72 ("igb: When GbE link up, wait for Remote receiver status condition")
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When removing the pn533 device (i2c or USB), there is a logic error. The
original code first cancels the worker (flush_delayed_work) and then
destroys the workqueue (destroy_workqueue), leaving the timer the last
one to be deleted (del_timer). This result in a possible race condition
in a multi-core preempt-able kernel. That is, if the cleanup
(pn53x_common_clean) is concurrently run with the timer handler
(pn533_listen_mode_timer), the timer can queue the poll_work to the
already destroyed workqueue, causing use-after-free.

This patch reorder the cleanup: it uses the del_timer_sync to make sure
the handler is finished before the routine will destroy the workqueue.
Note that the timer cannot be activated by the worker again.

static void pn533_wq_poll(struct work_struct *work)
...
 rc = pn533_send_poll_frame(dev);
 if (rc)
   return;

 if (cur_mod->len == 0 && dev->poll_mod_count > 1)
   mod_timer(&dev->listen_timer, ...);

That is, the mod_timer can be called only when pn533_send_poll_frame()
returns no error, which is impossible because the device is detaching
and the lower driver should return ENODEV code.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Fix checksum byte order on little-endian

These patches address a bug in the byte ordering of MPTCP checksums on
little-endian architectures. The __sum16 type is always big endian, but
was being cast to u16 and then byte-swapped (on little-endian archs)
when reading/writing the checksum field in MPTCP option headers.

MPTCP checksums are off by default, but are enabled if one or both peers
request it in the SYN/SYNACK handshake.

The corrected code is verified to interoperate between big-endian and
little-endian machines.

Patch 1 fixes the checksum byte order, patch 2 partially mitigates
interoperation with peers sending bad checksums by falling back to TCP
instead of resetting the connection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC 8684 section 3.7 describes several opportunities for a MPTCP
connection to "fall back" to regular TCP early in the connection
process, before it has been confirmed that MPTCP options can be
successfully propagated on all SYN, SYN/ACK, and data packets. If a peer
acknowledges the first received data packet with a regular TCP header
(no MPTCP options), fallback is allowed.

If the recipient of that first data packet finds a MPTCP DSS checksum
error, this provides an opportunity to fail gracefully with a TCP
fallback rather than resetting the connection (as might happen if a
checksum failure were detected later).

This commit modifies the checksum failure code to attempt fallback on
the initial subflow of a MPTCP connection, only if it's a failure in the
first data mapping. In cases where the peer initiates the connection,
requests checksums, is the first to send data, and the peer is sending
incorrect checksums (see
https://github.com/multipath-tcp/mptcp_net-next/issues/275), this allows
the connection to proceed as TCP rather than reset.

Fixes: dd8bcd17 ("mptcp: validate the data checksum")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MPTCP code typecasts the checksum value to u16 and
then converts it to big endian while storing the value into
the MPTCP option.

As a result, the wire encoding for little endian host is
wrong, and that causes interoperabilty interoperability
issues with other implementation or host with different endianness.

Address the issue writing in the packet the unmodified __sum16 value.

MPTCP checksum is disabled by default, interoperating with systems
with bad mptcp-level csum encoding should cause fallback to TCP.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/275
Fixes: c5b39e26 ("mptcp: send out checksum for DSS")
Fixes: 390b95a5 ("mptcp: receive checksum for DSS")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-05-17

This series contains updates to ice driver only.

Arkadiusz prevents writing of timestamps when rings are being
configured to resolve null pointer dereference.

Paul changes a delayed call to baseline statistics to occur immediately
which was causing misreporting of statistics due to the delay.

Michal fixes incorrect restoration of interrupt moderation settings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2022-05-18

1) Fix "disable_policy" flag use when arriving from different devices.
   From Eyal Birger.

2) Fix error handling of pfkey_broadcast in function pfkey_process.
   From Jiasheng Jiang.

3) Check the encryption module availability consistency in pfkey.
   From Thomas Bartschies.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow
encoding, and so it does not jump to the following instruction as
expected. So use W(b) instead.

Fixes: 6c7cb60b ("ARM: fix Thumb2 regression with Spectre BHB")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

The Spectre-BHB mitigations were inadvertently left disabled for
Cortex-A15, due to the fact that cpu_v7_bugs_init() is not called in
that case. So fix that.

Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Saeed Mahameed says:

====================
mlx5 fixes 2022-05-17

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel
produces invalid pfkey acquire messages, when these encryption modules are disabled. This
happens because the availability of the algos wasn't checked in all necessary functions.
This patch adds these checks.
Signed-off-by: Thomas Bartschies <thomas.bartschies@cvk.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

If skb_clone() returns null pointer, pfkey_broadcast() will
return error.
Therefore, it should be better to check the return value of
pfkey_broadcast() and return error if fails.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>