- 25 Jul, 2023 18 commits
-
-
Juerg Haefliger authored
The meson-vdec module loads firmware so add MODULE_FIRMWARE macros to provide that information via modinfo. Signed-off-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ming Qian authored
convert numbers into meaningful names, then it can improve the log readability Fixes: 9f599f35 ("media: amphion: add vpu core driver") Signed-off-by:
Ming Qian <ming.qian@nxp.com> Reviewed-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Ming Qian authored
according to v4l2 stateful decoder document 4.5.1.3. State Machine, the state should change from seek to initialization if call VIDIOC_REQBUFS(OUTPUT, 0). so reinit the vpu decoder if reqbufs output 0 Fixes: 6de8d628 ("media: amphion: add v4l2 m2m vpu decoder stateful driver") Signed-off-by:
-
Hans Verkuil authored
It was completely unnecessary to use BUG in saa7164_s_frequency, just return an error instead. This also solves a smatch error: drivers/media/pci/saa7164/saa7164-encoder.c:388 saa7164_s_frequency() error: potentially dereferencing uninitialized 'tsport'. Signed-off-by: -
Hans Verkuil authored
It was completely unnecessary to use BUG in buffer_prepare(). Just replace it with an error return. This also fixes a smatch warning: drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'. Signed-off-by: -
Hans Verkuil authored
This tells sparse that tegra_vip_driver is actually used, and so avoids this warning: drivers/staging/media/tegra-video/vip.c:280:31: warning: 'tegra_vip_driver' defined but not used [-Wunused-variable] 280 | static struct platform_driver tegra_vip_driver = { | ^~~~~~~~~~~~~~~~ Signed-off-by:Luca Ceresoli <luca.ceresoli@bootlin.com>
-
Hans Verkuil authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not make any sense. This also fixes this !CONFIG_OF error: drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.c:529:34: warning: 'sun6i_isp_of_match' defined but not used [-Wunused-const-variable=] 529 | static const struct of_device_id sun6i_isp_of_match[] = { | ^~~~~~~~~~~~~~~~~ Signed-off-by:Chen-Yu Tsai <wens@csie.org>
-
Hans Verkuil authored
BUG_ON is unnecessary here, and in addition it confuses smatch. Replacing this with an error return help resolve this smatch warning: drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34 Signed-off-by: -
Ming Qian authored
Shijie has not been actively working on the driver, his e-mail address is bouncing for quite awhile now. remove him from the maintainer list here. I do want to thank him for his work on the driver. Signed-off-by:
Zhou Peng <eagle.zhou@nxp.com> Signed-off-by:
-
Andy Shevchenko authored
The kernel already has a helper to print a hexdump of a small buffer via pointer extension. Use that instead of open coded variant. In long term it helps to kill pr_cont() or at least narrow down its use. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Tomi Valkeinen authored
Fix the following warning: drivers/media/i2c/ds90ub913.c:488:9: warning: 'v' may be used uninitialized [-Wmaybe-uninitialized] 488 | ub913_write(priv, UB913_REG_GENERAL_CFG, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 489 | v | UB913_REG_GENERAL_CFG_CRC_ERR_RESET); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/media/i2c/ds90ub913.c:477:12: note: 'v' was declared here 477 | u8 v, v1, v2; | ^ Fix the warning by initializing the variable to 0. Proper error handling here would be somewhat pointless, as we are just printing register values, and the user will see an error about the failed i2c transaction. Fixes: c158d0d4 ("media: i2c: add DS90UB913 driver") Reported-by:Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
Thomas Zimmermann authored
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by kzalloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by:
-
Tomi Valkeinen authored
CAL uses get_frame_desc to get the VC and DT for the incoming CSI-2 stream, but does it in a bit hacky way. Clean this up by implementing .get_frame_desc to camera-rx, and calling that from cal.c. No functional change intended. Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
-
Tomi Valkeinen authored
Change TI CAL driver to use subdev state. No functional changes (intended). This allows us to get rid of the 'formats' field, as the formats are kept in the state, and also the 'mutex' as we already have state locking. Signed-off-by:
-
Tomi Valkeinen authored
We don't do a proper job at freeing resources in cal_camerarx_create's error paths. Fix these, and also switch the phy allcation from kzalloc to devm_kzalloc to simplify the code further. Signed-off-by:
-
Tomi Valkeinen authored
Clean up the CAL drivers uses of mbus formats: - Switch all YUV formats from 2X8 formats to 1X16, as those are what should be used for CSI-2 bus. - Drop 24 and 32 bit formats, as the driver doesn't support them (see cal_ctx_pix_proc_config()). - Switch RGB565_2X8_LE to RGB565_1X16 (for the same reason as for the YUV formats) and drop RGB565_2X8_BE as it cannot be supported with CSI-2. Signed-off-by:
-
Martin Kepplinger authored
The imx8mq-mipi-csi2 MIPI CSI-2 receiver driver is used and maintained. There is no reason to keep it in staging. The accompanying CSI bridge driver that uses it is in drivers/media/platform/nxp as well. One TODO is to get rid of csi_state's "state" and "lock" variables. Especially make sure suspend/resume is working without them. That can very well be worked on from the new location. Also add a MAINTAINERS section for the imx8mq-mipi-csi2 mipi receiver driver. Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Nikolay Kyx authored
This patch fixes the following checkpatch.pl warning: WARNING: Avoid multiple line dereference in file ipu3-css.c Signed-off-by:
Nikolay Kyx <knv418@gmail.com> Signed-off-by:
-
- 19 Jul, 2023 22 commits
-
-
Uwe Kleine-König authored
struct i2c_driver::probe_new is about to go away. Switch the driver to use the probe callback with the same prototype. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Jammy Huang authored
When capturing 1600x900, system could crash when system memory usage is tight. The way to reproduce this issue: 1. Use 1600x900 to display on host 2. Mount ISO through 'Virtual media' on OpenBMC's web 3. Run script as below on host to do sha continuously #!/bin/bash while [ [1] ]; do find /media -type f -printf '"%h/%f"\n' | xargs sha256sum done 4. Open KVM on OpenBMC's web The size of macro block captured is 8x8. Therefore, we should make sure the height of src-buf is 8 aligned to fix this issue. Signed-off-by:
Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by:
-
Uwe Kleine-König authored
struct i2c_driver::probe_new() is about to go away. Since I converted all drivers below drivers/media use struct i2c_driver::probe, three more drivers were added in the following commits that use .probe_new(): commit 6363db1c ("media: i2c: add DS90UB953 driver") commit c158d0d4 ("media: i2c: add DS90UB913 driver") commit afe267f2 ("media: i2c: add DS90UB960 driver") Switch these driver to use the probe callback. Signed-off-by:
-
Harshit Mogalapalli authored
Smatch warns: drivers/media/i2c/ds90ub960.c:1671 ub960_rxport_add_serializer(): err: 'rxport->ser.client' dereferencing possible ERR_PTR() i2c_new_client_device() returns error pointers on failure and in dev_dbg statement we are dereferencing error pointer which is a bug. Fix this by using IS_ERR() which checks for error pointers. Fixes: afe267f2 ("media: i2c: add DS90UB960 driver") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
-
Yang Li authored
Remove .owner field if calls are used which set it automatically. to silence the warning: ./drivers/media/i2c/ds90ub953.c:1390:3-8: No need to set .owner here. The core will do it. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5902Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Zhang Shurong authored
In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by:
-
Zhang Shurong authored
If opera1_xilinx_rw fails, the mac address is not initialized. And opera1_read_mac_address does not handle this failure, which leads to the uninit-value in dvb_usb_adapter_dvb_init. Fix this by handling the failure of opera1_xilinx_rw. Signed-off-by:
-
Zhang Shurong authored
In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach az6007_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
-
Zhang Shurong authored
In anysee_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach anysee_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
-
Zhang Shurong authored
In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
-
Zhang Shurong authored
In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach dw2102_i2c_transfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 950e252c ("[media] dw2102: limit messages to buffer size") Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
Yangtao Li <frank.li@vivo.com> Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
media: verisilicon: Convert to devm_platform_ioremap_resource() and devm_platform_ioremap_resource_byname() Use devm_platform_ioremap_resource() and devm_platform_ioremap_resource_byname() to simplify code. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
