- 28 Jan, 2022 40 commits
-
-
Yong Wu authored
MediaTek IOMMU has already added the device_link between the consumer and smi-larb device. If the drm device calls the pm_runtime_get_sync, the smi-larb's pm_runtime_get_sync also be called automatically. CC: CK Hu <ck.hu@mediatek.com> CC: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Yong Wu <yong.wu@mediatek.com> Reviewed-by:
Evan Green <evgreen@chromium.org> Acked-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yongqiang Niu authored
Prepare for smi cleaning up "mediatek,larb". Display use the dispsys device to call pm_rumtime_get_sync before. This patch add pm_runtime_xx with ovl and rdma device whose nodes has "iommus" property, then display could help pm_runtime_get for smi via ovl or rdma device. (Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync) CC: CK Hu <ck.hu@mediatek.com> Signed-off-by:
Yongqiang Niu <yongqiang.niu@mediatek.com> Signed-off-by:
-
Yong Wu authored
MediaTek IOMMU has already added the device_link between the consumer and smi-larb device. If the mdp device calls the pm_runtime_get_sync, the smi-larb's pm_runtime_get_sync also be called automatically. CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Signed-off-by:
Houlong Wei <houlong.wei@mediatek.com> Reviewed-by:
-
Yong Wu authored
MediaTek IOMMU has already added device_link between the consumer and smi-larb device. If the jpg device calls the pm_runtime_get_sync, the smi-larb's pm_runtime_get_sync also be called automatically. After removing the larb_get operations, then mtk_jpeg_clk_init is also unnecessary. Remove it too. CC: Xia Jiang <xia.jiang@mediatek.com> Signed-off-by:
Rick Chang <rick.chang@mediatek.com> Reviewed-by:
-
Yong Wu authored
MediaTek IOMMU-SMI diagram is like below. all the consumer connect with smi-larb, then connect with smi-common. M4U | smi-common | ------------- | | ... | | larb1 larb2 | | vdec venc When the consumer works, it should enable the smi-larb's power which also need enable the smi-common's power firstly. Thus, First of all, use the device link connect the consumer and the smi-larbs. then add device link between the smi-larb and smi-common. This patch adds device_link between the consumer and the larbs. When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling pm_runtime_xx to keep the original status of clocks. It can avoid two issues: 1) Display HW show fastlogo abnormally reported in [1]. At the beggining, all the clocks are enabled before entering kernel, but the clocks for display HW(always in larb0) will be gated after clk_enable and clk_disable called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock operation happened before display driver probe. At that time, the display HW will be abnormal. 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip pm_runtime_xx to avoid the deadlock. Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then device_link_removed should be added explicitly. Meanwhile, Currently we don't have a device connect with 2 larbs at the same time. Disallow this case, print the error log. [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/ [2] https://lore.kernel.org/patchwork/patch/1086569/Suggested-by:Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Reviewed-by:
-
Yong Wu authored
Prepare for adding device_link. The iommu consumer should use device_link to connect with the smi-larb(supplier). then the smi-larb should run before the iommu consumer. Here we delay the iommu driver until the smi driver is ready, then all the iommu consumers always are after the smi driver. When there is no this patch, if some consumer drivers run before smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the device_link_add, then device_links_driver_bound will use WARN_ON to complain that the link_status of supplier is not right. device_is_bound may be more elegant here. but it is not allowed to EXPORT from https://lore.kernel.org/patchwork/patch/1334670/. Signed-off-by:
-
Yong Wu authored
The platform device is created at: of_platform_default_populate_init: arch_initcall_sync ->of_platform_populate ->of_platform_device_create_pdata When entering our probe, all the devices should be already created. if it is null, means NODEV. Currently we don't get the fail case. It's a minor fix, no need add fixes tags. Signed-off-by: -
Yong Wu authored
When the iommu master device enters of_iommu_xlate, the ops may be NULL(iommu dev is defered), then it will initialize the fwspec here: [<c0c9c5bc>] (dev_iommu_fwspec_set) from [<c06bda80>] (iommu_fwspec_init+0xbc/0xd4) [<c06bd9c4>] (iommu_fwspec_init) from [<c06c0db4>] (of_iommu_xlate+0x7c/0x12c) [<c06c0d38>] (of_iommu_xlate) from [<c06c10e8>] (of_iommu_configure+0x144/0x1e8) BUT the mtk_iommu_v1.c only supports arm32, the probing flow still is a bit weird. We always expect create the fwspec internally. otherwise it will enter here and return fail. static int mtk_iommu_create_mapping(struct device *dev, struct of_phandle_args *args) { ... if (!fwspec) { .... } else if (dev_iommu_fwspec_get(dev)->ops != &mtk_iommu_ops) { >>>>>>>>>>Enter here. return fail.<<<<<<<<<<<< return -EINVAL; } ... } Thus, Free the existed fwspec if the master device already has fwspec. This issue is reported at: https://lore.kernel.org/linux-mediatek/trinity-7d9ebdc9-4849-4d93-bfb5-429dcb4ee449-1626253158870@3c-app-gmx-bs01/Reported-by:Frank Wunderlich <frank-w@public-files.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Signed-off-by:
-
Yong Wu authored
After adding device_link between the consumer with the smi-larbs, if the consumer call its owner pm_runtime_get(_sync), the pm_runtime_get(_sync) of smi-larb and smi-common will be called automatically. Thus, the consumer don't need this property. And IOMMU also know which larb this consumer connects with from iommu id in the "iommus=" property. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Hsin-Yi Wang authored
Add mediatek,mt8183-jpgenc compatible to binding document. Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by:
-
Hsin-Yi Wang authored
Convert mediatek jpeg decoder and encoder bindings to yaml. Signed-off-by:
-
Chen-Yu Tsai authored
The quantization tables used in the Hantro JPEG encoder driver are implicitly sized by the data they contain, but the loop that scales the tables based on the compression quality hard codes the size to 64. No code exists to check whether the two actually match. Commit 85bdcb7e ("media: hantro: Write the quantization tables in proper order") introduced two new tables, with sizes hardcoded to 64, but still no checking if all the sizes are the same. Commit 41479adb ("media: hantro: Avoid global variable for jpeg quantization tables") added the macro JPEG_QUANT_SIZE, but only the newly added fields used this. This has resulted in code scattered with magic numbers and array sizes that happen to match up, without any sort of sanity checking to enforce it. Drop the hard-coded array sizes, replace the magic loop count with a proper JPEG_QUANT_SIZE macro, and add BUILD_BUG_ON()s to check that all the table sizes match up. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Chen-Yu Tsai authored
Now that the JPEG header length is aligned with bus access boundaries, the JPEG encoder can output to the capture buffers directly without going through a bounce buffer. Do just that, and get rid of all the bounce buffer related code. Signed-off-by:
-
Chen-Yu Tsai authored
The Hantro JPEG encoder driver adds various segments to the JPEG header. While it would be quite complicated to make these segments selectable to userspace, given that the driver has to fill in various fields in these segments, and also take care of alignment, it would be nice if the driver could signal to userspace what segments are included. Implement the V4L2_CID_JPEG_ACTIVE_MARKER control, and make it read only so that it always returns the set of segments that the driver adds. Signed-off-by:
-
Chen-Yu Tsai authored
The JPEG header size is not 64-bit aligned. This makes the driver require a bounce buffer for the encoded JPEG image scan output. Add a COM (comment) segment to the JPEG header so that the header size is a multiple of 64 bits. This will then allow dropping the use of the bounce buffer, and instead have the hardware write out to the capture buffer directly. Signed-off-by:
-
Chen-Yu Tsai authored
While the V4L2_PIX_FMT_JPEG format doesn't specify any requirements for the APP0 or APP1 segments, it would be nice if the output is JFIF compliant. While some programs can read JPEG streams that aren't, some guess work is involved. Add the standard JFIF APP0 segment to the JPEG header, so that the JPEG encoder output is JFIF compliant. Signed-off-by:
-
Chen-Yu Tsai authored
Encoders typically operate on macroblocks. Thus their output or coded resolution is constrained to multiples of macroblocks. For frame sizes not aligned to macroblocks, cropping is needed to limit the visible area of the frame. Add support for cropping on the output (source) side for encoders, using the selection API. Signed-off-by:
-
Chen-Yu Tsai authored
The Hantro H1 hardware can crop off pixels from the right and bottom of the source frame. These are controlled with the H1_REG_IN_IMG_CTRL_OVRFLB and H1_REG_IN_IMG_CTRL_OVRFLR in the H1_REG_IN_IMG_CTRL register. The ChromeOS kernel driver that this was based on incorrectly added the _D4 suffix H1_REG_IN_IMG_CTRL_OVRFLB. This field crops the bottom of the input frame, and the number is _not_ divided by 4. [1] Correct the name to avoid confusion when crop support with the selection API is added. [1] https://chromium.googlesource.com/chromiumos/third_party/kernel/+/refs/ \ heads/chromeos-4.19/drivers/staging/media/hantro/hantro_h1_vp8_enc.c#377 Fixes: 775fec69 ("media: add Rockchip VPU JPEG encoder driver") Fixes: a29add8c ("media: rockchip/vpu: rename from rockchip to hantro") Signed-off-by:
-
Benjamin Mugnier authored
Mickael left the company and is not willing to keep maintainership. Add Sylvain and myself as maintainers of mipid02 driver. Signed-off-by:
Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by:
-
Christophe JAILLET authored
No concurrent access is possible when a bitmap is local to a function. So prefer the non-atomic '__[set|clear]_bit()' functions to save a few cycles. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Martin Kepplinger authored
Add the fsl,imx8mq-csi compatible string to the bindings for nxp,imx7-csi. The i.MX8MQ SoC contains the same CSI bridge controller as the i.MX7. Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
Martin Kepplinger authored
Modeled after the NXP driver mx6s_capture.c that this driver is based on, imx8mq needs different settings for the baseaddr_switch mechanism. Define the needed bits and set that for imx8mq. Without these settings, the system will "sometimes" hang completely when starting to stream (the interrupt will never be called). Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Jiasheng Jiang authored
As the possible failure of the kzalloc(), the 'new_ts' could be NULL pointer. Therefore, it should be better to check it in order to avoid the dereference of the NULL pointer. Also, the caller esparser_queue() needs to deal with the return value of the amvdec_add_ts(). Fixes: 876f123b ("media: meson: vdec: bring up to compliance") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Suggested-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Mirela Rabulea authored
If the application queues an NV12M jpeg as output buffer, but then queues a single planar capture buffer, the kernel will crash with "Unable to handle kernel NULL pointer dereference" in mxc_jpeg_addrs, prevent this by finishing the job with error. Signed-off-by:
Mirela Rabulea <mirela.rabulea@oss.nxp.com> Signed-off-by:
-
Jean-Michel Hautbois authored
This packed grey-scale image format has a depth of 10 bits per pixel. Every four consecutive pixels are packed into 5 bytes. Each of the first 4 bytes contain the 8 high order bits of the pixels, and the 5th byte contains the 2 least significants bits of each pixel, in the same order. The first two bytes are not corresponding to this description, fix it. Fixes: af4f4505 ("media: doc: pixfmt-yuv: Move all luma-only YUV formats to common file") Signed-off-by:
Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by:
-
Daniel Lundberg Pedersen authored
Example should be comparing errno to EINTR instead of doing assignment. Signed-off-by:
Daniel Lundberg Pedersen <dlp@qtec.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Miaoqian Lin authored
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: e7f3c548 ("[media] coda: use VDOA for un-tiling custom macroblock format") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Lad Prabhakar authored
mtk_vpu_probe() calls platform_get_resource(pdev, IORESOURCE_IRQ, ..) to check if IRQ resource exists and later calls platform_get_irq(pdev, ..) to get the actual IRQ. This patch drops an unnecessary call to platform_get_resource() and checks the return value of platform_get_irq(pdev, ..) to make sure the IRQ line is valid. Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Jacopo Mondi authored
The 'maxim,gpio-poc' property is used when the remote camera power-over-coax is controlled by one of the MAX9286 gpio lines, to instruct the driver about which line to use and what the line polarity is. Add to the max9286 driver support for parsing the newly introduced property and use it if available in place of the usual supply, as it is not possible to establish one as consumer of the max9286 gpio controller. If the new property is present, no gpio controller is registered and 'poc-supply' is ignored. In order to maximize code re-use, break out the max9286 gpio handling function so that they can be used by the gpio controller through the gpio-consumer API, or directly by the driver code. Wrap the power up and power down routines to their own function to be able to use either the gpio line directly or the supply. This will make it easier to control the remote camera power at run time. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
-
Jacopo Mondi authored
Define a new vendor property in the maxim,max9286 binding schema. The new property allows to declare that the remote camera power-over-coax is controlled by one of the MAX9286 gpio lines. As it is currently not possible to establish a regulator as consumer of the MAX9286 gpio controller for this purpose, the property allows to declare that the camera power is controlled by the MAX9286 directly. The property accepts a gpio-index (0 or 1) and one line polarity flag as defined by dt-bindings/gpio/gpio.h. Reviewed-by:
-
