This prevents division by zero scan_rate.

The zero scan_rate does not need any special action as it actually means
"never poll again".
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes the module parameter clock_speed from the HDM code.

Instead, the platform-dependent clock speed must be delivered by the
platform driver with the help of the dim2_platform_data.clk_speed.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This prohibits the allocation of the memory for the MBOs if only the
part of the MBOs, requested by the application, may be allocated.  The
function arm_mbo_chain, if cannot allocate all requested MBO, frees all
prior allocated memory and returns 0.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes a checkpatch.pl warning.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl complains these are invalid because the rules in
Documentation/process/license-rules.rst state that C headers should
have "/* */" style comments.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warnings about lines ending with parentheses.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warnings about lines ending with parentheses.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warnings about lines ending with parentheses.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warnings about lines ending with parentheses.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the identifiers when missing and fix the ones already present
according to checkpatch.pl.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following checkpatch.pl warning:
"prefer 'help' over '---help---' for new help texts"
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

d_splice_alias() can return an ERR_PTR().
If it does while debugging is enabled, the following
CDEBUG() will dereference that error and crash.

So add appropriate checking, and provide a separate
debug message for the error case.
Reported-and-tested-by: James Simmons <jsimmons@infradead.org>
Fixes: e9d4f0b9 ("staging: lustre: llite: use d_splice_alias for directories.")
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no longer any need to keep this code separate,
and now we can remove linux-module.c
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ioctl handler for the misc device is in  lnet/libcfs/module.c
but is it registered in lnet/libcfs/linux/linux-module.c.

Keeping related code together make maintenance easier, so move the
code.
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Both the 'next' and the 'show' functions for the dump_page_cache
seqfile perform a lookup based on the current file index.  This is
needless duplication.

The reason appears to be that the state that needs to be communicated
from "next" to "show" is two pointers, but seq_file only provides for
a single pointer to be returned from next and passed to show.

So make use of the new 'seq_private' structure to store the extra
pointer.
So when 'next' (or 'start') find something, it returns the page and
stores the clob in the private area.
'show' accepts the page as an argument, and finds the clob where it
was stored.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dump_page_cache debugfs file allocates and frees an 'env' in each
call to vvp_pgcache_start,next,show.  This is likely to be fast, but
does introduce the need to check for errors.

It is reasonable to allocate a single 'env' when the file is opened,
and use that throughout.

So create 'seq_private' structure which stores the sbi, env, and
refcheck, and attach this to the seqfile.

Then use it throughout instead of allocating 'env' repeatedly.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lu_object_new() duplicates a lot of code that is in
lu_object_find_at().
There is no real need for a separate function, it is simpler just
to skip the bits of lu_object_find_at() that we don't
want in the LOC_F_NEW case.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current retry logic, to wait when a 'dying' object is found,
spans multiple functions.  The process is attached to a waitqueue
and set TASK_UNINTERRUPTIBLE in htable_lookup, and this status
is passed back through lu_object_find_try() to lu_object_find_at()
where schedule() is called and the process is removed from the queue.

This can be simplified by moving all the logic (including
hashtable locking) inside htable_lookup(), which now never returns
EAGAIN.

Note that htable_lookup() is called with the hash bucket lock
held, and will drop and retake it if it needs to schedule.

I made this a 'goto' loop rather than a 'while(1)' loop as the
diff is easier to read.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lu_object maintains 2 lru counts.
One is a per-bucket lsb_lru_len.
The other is the per-cpu ls_lru_len_counter.

The only times the per-bucket counters are use are:
- a debug message when an object is added
- in lu_site_stats_get when all the counters are combined.

The debug message is not essential, and the per-cpu counter
can be used to get the combined total.

So discard the per-bucket lsb_lru_len.
Reviewed-by: Andreas Dilger <andreas.dilger@dilger.ca>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This data structure only needs to be public so that
various modules can access a wait queue to wait for object
destruction.
If we provide a function to get the wait queue, rather than the
whole bucket, the structure can be made private.
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 warning: variable ‘intf_id’ set but
not used [-Wunused-but-set-variable]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This satisfies a checkpatch.pl warning and is the preferred method for
notating the license due to its lack of ambiguity.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This statment triggers GCC's -Wtype-limit since key_index is an
unsigned integer so it cannot be less than zero.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GCC warns that 'wid' is unused in wilc_remove_key and it's correct; the
variable is only local. Get rid of the function (since it just returns
zero) and shuffle the remaining code into one if statement.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GCC warns these variables are all set but never used so remove them.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are multiple occurrances of typos of "offest" that should be
"offset". Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The GNUBEE has 32MB flash, so set partitions accordingly.
Also remove "m25p,chunked-io" which isn't documented or
used anywhere (outside of freewrt).
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some code is dead because it is commented out.
Some is dead because it is uninteresting printks.
Some is dead because it declares unused functions.

Remove it all.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These resources are extracted from devicetree, so they aren't
needed here.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code currently defines:

#define CONFIG_PCIE_PORT0
#define CONFIG_PCIE_PORT1
#define CONFIG_PCIE_PORT2
#define GPIO_PERST

and then compiles code only if they are defined.
We might want to disable some of these via devicetree one
day, but for now just remove the #defines and the
conditions - all the code for different ports is
easy to identify.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- remove white space at end of line.
- no more than 2 blank line at a time
- remove spaces before tabs
- use tabs to line things up
- re-indent some #define do{}while(0)
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As the Interrupts for the PCI adapters are listed in
devicetree we shouldn't need to have them explicit in the code.

The simplest way to do this is to use of_irq_parse_and_map_pci()
and specify an interrupt-map which identifies the different
PCI hosts by bus/slot numbers.
This has the advantage that the hwirq number are mapped to virq
numbers for us, so the ugly hack can go.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This lock is never initialized, locked once, and never unlocked.
Clearly it is pointless - so remove it.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtk_phy_link_adjust takes a spinlock and disables
interrupts, but never unlocks.
This can leave interrupts disabled on one CPU and
various things stop working.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current code has some barrier macros in it, which are already '#if
0' out, so just remove them.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit cleans the includes in the sd.c file. Those which are not
needed are removed, the remaining ones are sorted alphabetically.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro HOST_MAX_NUM is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code uses linked DMA mode only when there is more than one
entry in the scatterlist. But the overhead of the linked DMA is very
small, so the code is easier when only using linked DMA and this is
also the way, the upstream driver mtk-sd handles it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The msdc_dma_config function currently returns always 0. Remove the
return and change to void.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code disables the DMA after the transfer. That only changes
the transfer mode to non-DMA and does not save any power. This is not
necessary any more, because now DMA transfer is always used. The macro
for disabling DMA transfer is also removed, because it is not used any
more.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>