- 26 Apr, 2022 27 commits
-
-
Bart Van Assche authored
Since specifying the path in a source file is redundant, remove the paths from source code comments. Link: https://lore.kernel.org/r/20220419225811.4127248-19-bvanassche@acm.orgTested-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
As requested in Documentation/process/license-rules.rst, use an SPDX license identifier. Link: https://lore.kernel.org/r/20220419225811.4127248-18-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
The new name reflects the role of this member variable better: a WLUN through which the power mode of the UFS device is controlled. Link: https://lore.kernel.org/r/20220419225811.4127248-17-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
The current version number is 0.2. That driver version was assigned more than nine years ago. A version number that is not updated while the driver is updated is not useful. Hence remove the driver version number from the UFS driver. See also commit e0eca63e ("[SCSI] ufs: Separate PCI code into glue driver"). Link: https://lore.kernel.org/r/20220419225811.4127248-16-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Pass the actual type to config_scaling_param callback as the third argment instead of a void pointer. Remove a superfluous NULL pointer check from ufs_qcom_config_scaling_param(). Link: https://lore.kernel.org/r/20220419225811.4127248-15-bvanassche@acm.orgTested-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
-
Bart Van Assche authored
Make it easier to verify for humans that ufshcd_init_pwr_dev_param() initializes all structure members. This patch does not change any functionality. Link: https://lore.kernel.org/r/20220419225811.4127248-14-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Commit 5b44a07b ("scsi: ufs: Remove pre-defined initial voltage values of device power") removed the code that uses the UFS_VREG_VCC* constants and also the code that sets the min_uV and max_uV member variables. Hence also remove these constants and that member variable. Link: https://lore.kernel.org/r/20220419225811.4127248-13-bvanassche@acm.orgTested-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
-
Bart Van Assche authored
It is confusing that ufshcd_is_hba_active() returns 'true' if the HBA is not active. Clear up this confusion by inverting the return value of ufshcd_is_hba_active(). This patch does not change any functionality. Link: https://lore.kernel.org/r/20220419225811.4127248-12-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Declare the quirks array and also its 'model' member const to make it explicit that these are not modified. Link: https://lore.kernel.org/r/20220419225811.4127248-11-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Since struct ufs_dev_fix contains quirk information, rename it into struct ufs_dev_quirk. Link: https://lore.kernel.org/r/20220419225811.4127248-10-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Since these two macros reduce code readability, remove them. Link: https://lore.kernel.org/r/20220419225811.4127248-9-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Use get_unaligned_be16(...) instead of the equivalent but harder to read be16_to_cpup((__be16 *)...). Link: https://lore.kernel.org/r/20220419225811.4127248-8-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
ufshcd_lrb.sense_buffer is NULL if ufshcd_lrb.cmd is NULL and ufshcd_lrb.sense_buffer points at cmd->sense_buffer if ufshcd_lrb.cmd is set. In other words, the ufshcd_lrb.sense_buffer member is identical to cmd->sense_buffer. Hence this patch that removes the ufshcd_lrb.sense_buffer structure member. Link: https://lore.kernel.org/r/20220419225811.4127248-7-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
ufshcd_lrb.sense_bufflen is set but never read. Hence remove this struct member. Link: https://lore.kernel.org/r/20220419225811.4127248-6-bvanassche@acm.orgTested-by:
Keoseong Park <keosung.park@samsung.com> Reviewed-by:
-
Bart Van Assche authored
Convert "if (expr) return true; else return false;" into "return expr;" if either 'expr' is a boolean expression or the return type of the function is 'bool'. Link: https://lore.kernel.org/r/20220419225811.4127248-5-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Remove "? true : false" if the preceding expression yields a boolean or if the result of the expression is assigned to a boolean since in these two cases the "? true : false" part is superfluous. Link: https://lore.kernel.org/r/20220419225811.4127248-4-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Declare this function static since it is only used inside the ufshcd.c source file. Link: https://lore.kernel.org/r/20220419225811.4127248-3-bvanassche@acm.orgTested-by:
-
Bart Van Assche authored
Change one occurrence of "adpater" into "adapter". Link: https://lore.kernel.org/r/20220419225811.4127248-2-bvanassche@acm.orgTested-by:
-
Konstantin Vyshetsky authored
UFS devices are expected to clear fDeviceInit flag in single digit milliseconds. Current values of 5 to 10 millisecond sleep add to increased latency during the initialization and resume path. This CL lowers the sleep range to 500 to 1000 microseconds. Link: https://lore.kernel.org/r/20220421002429.3136933-1-bvanassche@acm.orgAcked-by:
Konstantin Vyshetsky <vkon@google.com> Signed-off-by:
-
Dan Carpenter authored
These flags are supposed to be bit numbers. Right now they cause a double shift bug where we use BIT(BIT(2)) instead of BIT(2). Fortunately, the bit numbers are small and it's done consistently so it does not cause an issue at run time. Link: https://lore.kernel.org/r/YmFyWHf8nrrx+SHa@kili Fixes: 5bd85625 ("scsi: iscsi: Merge suspend fields") Reviewed-by:
Mike Christie <michael.christie@oracle.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Konstantin Shelekhin authored
Target does not support some VPD pages and is very verbose about it. Sometimes initiators don't bother and just keep sending the same request from time to time, filling up the logs. This patch lowers the message priority to debug. Link: https://lore.kernel.org/r/20220418212622.275516-1-k.shelekhin@yadro.comSigned-off-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by:
-
Damien Le Moal authored
The replyPostRegisterIndex array of struct MPT3SAS_ADAPTER stores iomem resource addresses. Fix its declaration to annotate it with __iomem to avoid sparse warnings for writel() calls using the stored addresses. Link: https://lore.kernel.org/r/20220307234854.148145-6-damien.lemoal@opensource.wdc.comSigned-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Damien Le Moal authored
In mpt3sas_scsih_event_callback(), fix a sparse warning when testing the event log code value by replacing the use of a pointer to the address storing the event log code with a log code local variable. Doing so, le32_to_cpu() is used when the log code value is assigned, avoiding a sparse warning. Link: https://lore.kernel.org/r/20220307234854.148145-5-damien.lemoal@opensource.wdc.comSigned-off-by:
-
Damien Le Moal authored
The functions _base_readl_aero() and _base_readl() used for an adapter base_readl() method are implemented using a regular readl() call which internally performs a conversion to CPU endianness (le32_to_cpu()) of the values read. The users of the ioc base_readl() method should thus not convert again the values read using le16_to_cpu(). Fixing this removes sparse warnings. Link: https://lore.kernel.org/r/20220307234854.148145-4-damien.lemoal@opensource.wdc.comSigned-off-by:
-
Damien Le Moal authored
writel() internally executes cpu_to_le32() to convert the value being written to little endian. The caller should thus not use this conversion function for the value passed to writel(). Remove the cpu_to_le32() calls in _base_put_smid_scsi_io_atomic(), _base_put_smid_fast_path_atomic(), _base_put_smid_hi_priority_atomic() _base_put_smid_default_atomic() and _base_handshake_req_reply_wait(). Link: https://lore.kernel.org/r/20220307234854.148145-3-damien.lemoal@opensource.wdc.comSigned-off-by:
-
Damien Le Moal authored
The TaskMID field of struct Mpi2SCSITaskManagementRequest_t is a 16-bit little endian value. Fix the search loop in _ctl_set_task_mid() to add a cpu_to_le16() conversion before checking the value of TaskMID to avoid sparse warnings. While at it, simplify the search loop code to remove an unnecessarily complicated if condition. Link: https://lore.kernel.org/r/20220307234854.148145-2-damien.lemoal@opensource.wdc.comSigned-off-by:
-
Gleb Chesnokov authored
The use of the free_sg command flag was dropped in commit 2c39b5ca ("qla2xxx: Remove SRR code"). Hence remove this flag and its check. Link: https://lore.kernel.org/r/AS8PR10MB4952747D20B76DC8FE793CCA9DEE9@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COMReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Gleb Chesnokov <Chesnokov.G@raidix.com> Signed-off-by:
-
- 19 Apr, 2022 13 commits
-
-
Sumit Saxena authored
The maximum SCSI device queue depth of 1024 is not sufficient for RAID volumes configured behind Broadcom RAID controllers. For a 16-drive RAID volume with a device queue depth limit of 1024, only 64 I/Os (1024/16) can be issued per drive. That is not sufficient to saturate the device. Link: https://lore.kernel.org/r/20220414103601.140687-1-sumit.saxena@broadcom.com Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Yihao Han authored
Replace 'if (!is_zero_ether_addr(mac))' with 'else' for simplification and add curly brackets according to the kernel coding style: "Do not unnecessarily use braces where a single statement will do." ... "This does not apply if only one branch of a conditional statement is a single statement; in the latter case use braces in both branches" Please refer to: https://www.kernel.org/doc/html/v5.17-rc8/process/coding-style.html Link: https://lore.kernel.org/r/20220408081237.14037-1-hanyihao@vivo.comSigned-off-by:
Yihao Han <hanyihao@vivo.com> Signed-off-by:
-
Jiapeng Chong authored
Fix the following coccicheck warning: ./drivers/scsi/pmcraid.c:4593:2-3: Unneeded semicolon. Link: https://lore.kernel.org/r/20220401030640.28246-1-jiapeng.chong@linux.alibaba.comReported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
James Smart authored
Update copyrights to 2022 for files modified in the 14.2.0.2 patch set. Link: https://lore.kernel.org/r/20220412222008.126521-27-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 14.2.0.2. Link: https://lore.kernel.org/r/20220412222008.126521-26-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
ELS_ID field for ELS_REQUEST64_WQE is not filled out when FIP is not supported by the HBA. Move setting ELS_ID logic into __lpfc_sli_prep_els_req_rsp_s4(), and remove ELS_ID FIP dependency logic from lpfc_sli_prep_wqe(). Introduce PLOGI ELS_ID and as a result update wqe_els_id_MASK because PLOGI ELS_ID = 0x4 occupies up to 3 bits. While in __lpfc_sli_prep_els_req_rsp_s4() routine, remove SLI3-isms. Link: https://lore.kernel.org/r/20220412222008.126521-25-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
READ_STATUS tx/rx byte count fields are now expanded to 64 bit wide counters. This patch updates logic for the READ_STATUS mbox command when displaying tx_word and rx_word statistics in sysfs. Link: https://lore.kernel.org/r/20220412222008.126521-24-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Do not rely on vendor version field of the CSPs to determine if we are in a FA-PWWN environment. Instead, use the following procedure: First, during HBA initialization, driver does a READ_CONFIG to determine if FA-PWWN is configured on the HBA. A LPFC_FAWWPN_CONFIG hba_flag is set accordingly. Next, when the link comes up before the driver gets a link up event, the firmware logs into the fabric with FA-PWWN. If the fabric port does not support FA-PWWN, the driver will get a Misconfigured FA-WWN async event before the link up. A LPFC_FAWWPN_FABRIC hba_flag will be set accordingly. Finally, if the fabric supports FA-PWWN, the firmware will replace its CSPs WWN with the Fabric Assigned ones. Then after link up, the driver will retrieve the Fabric Assigned WWN when it does a READ_SPARAM mbox command. Link: https://lore.kernel.org/r/20220412222008.126521-23-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The intention of this patch is to refactor mailbox memory allocation and cleanup steps in one routine respectively to prevent memory leaks or memory errors related to mailbox commands. There are trivial localized fixes as well. Provide lpfc_mbox_rsrc_prep() - this routine allocates the dmabuf and the mbuf associated with it. It also catches allocation errors and returns status. Provide lpfc_mbox_rsrc_cleanup() - this routine verifies a dmabuf exists and if so releases the associated mbuf and the dmabuf memory. It then sets the ctx_buf to NULL and releases the mailbox memory to the mailbox pool. Link: https://lore.kernel.org/r/20220412222008.126521-22-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The lpfc_iocbq data structure has void * pointers that are overloaded to be as many as 8 different data types and the driver translates the void * by casting. This patch removes the void * pointers by declaring the specific types needed by the driver. It also expands the context_un to include more seldom used pointer types to save structure bytes. It also groups the u8 types together to pack the 8 bytes needed. This work allows the lpfc_iocbq data structure to be more strongly typed and keeps it from being allocated from the 512 byte slab. [mkp: rolled in zeroday fix] Link: https://lore.kernel.org/r/20220412222008.126521-21-jsmart2021@gmail.comReported-by:
kernel test robot <lkp@intel.com> Co-developed-by:
-
James Smart authored
During an NVMe target reboot, the target may initialize itself as FCP only during the first RSCN and shortly after trigger a second RSCN claiming NVMe support. The timing of these RSCNs occur before FCP-PRLI for the first RSCN completes leading discovery issues over NVMe. Change RSCN and NVME-PRLI send logic based on a new FC_RSCN_MEMENTO flag that signals when lpfc_end_rscn() is completed and serves as a memento that discovery was started from RSCN. Link: https://lore.kernel.org/r/20220412222008.126521-20-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Add new FC-4 type 0x60 Application Services for fabric registration when VMID is enabled. Modified rft struture to indicate __be format. Removed redundant ipReg variable as it was not used. Link: https://lore.kernel.org/r/20220412222008.126521-19-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
FDMI FC-4 Active Type for vports mistakenly shows NVMe support. Add a check to only set the NVMe support bit for the physical port. Link: https://lore.kernel.org/r/20220412222008.126521-18-jsmart2021@gmail.comCo-developed-by:
-
